Display more than 2 measures in Bullet chart

Hi,
Can we compare more than 2 measure values using Bullet chart? Is there any workaround?
Thanks

Hi,
Adding series would add few more bullet charts and that is not what I wanted.
User should be able to compare 4 measures in a single bullet chart.
Thanks

Similar Messages

How can I display more than 15 rows in a stacked 3D horizontal flash chart

It seems I cannot display more than 15 rows at a time in a stacked 3D horizontal flash chart.
Any ideas?
Thanks, Pierre

The default history length of a chart is 1024. To make it longer is a right click option.

How can I display more than 1 loop iteraction in a waveform chart?

Using DAQmx, I am inputting a signal at a rate of 10k with 1k samples inside a while loop. I want the first 3 seconds of data to display on a waveform chart without having to change the rate or number of samples. Is there a way to stop the waveform chart from clearing after every loop iteration so that I can display more than 0.1sec of data? Thank you for any help you can provide!

The default history length of a chart is 1024. To make it longer is a right click option.

Display more than 15 Values in Chart

Hi,
I am pretty new to apex, and while this looks like a very basic problem, I couldn't find an answer to it on the web:
How do I display more than 15 value in a simple 'Horizontal 2D Column' chart?
I know that the SQL-Query returns 26 rows, but only the first 15 are displayed in the graph.
Thanks,
Martin

Hi Martin,
have a look at the page with the SQL query. There is a field labeled "Data Point Limit" or "Maximum Rows"
which is defaulted to 15. Just increase this number ...
Does this help ...
-Carsten
Infoseite der deutschsprachigen Application Express Community
http://www.oracle.com/global/de/community/index.html
BLOG: SQL und PL/SQL: Tipps, Tricks & Best Practice
http://sql-plsql-de.blogspot.com

Percentage Bar chart with more than 1 measure

Hi everbody,
i have a new big problem.
point of departure: i want to create a bar chart (stacked vertical) with more than 1 measure.
Vertical axis should be from 0% to 100%. Horizontal there are diverse, let's say departments.
Now it becomes tricky: Every department once more has its own under-departments.
So far so good. The measure is the number of employees per under-department.
So: in one bar you can see the complete number of employees per department AND the number of employees of one under-department in each block of this bar.
-> That's the idea!
Now: The whole chart should be presented in percentage.
-> Therefore i need to divide the particular block by the complete number of employees per bar and multiply it by 100.
My question is: How can i create a kind of dynamic variable, which adatps itself to the particular department
Edited by: 941338 on 27.06.2012 04:53

Looks like you need a dynamic variable to hold the value to calculate futher, for that using prompt(this should follow your criteria to get value) with prsentation variable, use the presentation variable in the report to calculate.
If it is helpful, please mark as correct or helpful

Line Chart - Formatting more than 4 lines in line chart

Hi,
How to format more than 4 lines in line chart using Crystal report Designer as by default it will display 4 lines in design mode.
Able to format 4 lines but i have to display total 6 lines.
Urgent. Please help....
Thanks,
ThakurS

Hi,
The design mode is not the right place to edit lines, bars etc for Charts.
You can select individual lines from the Preview Mode and edit them.
Hope this helps!
-Abhilash

How to display more than 60 columns in a report

I have a table defined as follows
id
column_name
column_value
data sample
id col_name column_value
1 col1 val1
1 col2 val2
1 col3 val3
2 col1 val1
2 col2 val2
2 col3 val3
now I want to display the data in a report as follows
id col1 col2 col3
1 val1 val2 val3
2 val1 val2 val3
I was able to generate output using pivots [http://technology.amis.nl/blog/1197/pivot-dynamic-data]
the problem is that I can have more that 60 columns retrieved in each row, the pivot solution will retrieve them correctly but I can't display more than 60 columns in apex reports, why this restriction in apex, any solution

Hello:
In the Source section of the report definition choose 'Use Generic Column Names (parse query at runtime only)' and then specify a suitable value for 'Maximum number of generic report columns:'
Varad

How do I display more than one region as a modal popup?

Hello all!
I have a popup that displays a report region. I now want it to display more than one region, say a report region and another report region underneath it.
Here's the code that I currently have (and this one can popup one region):
$.fx.speeds._default = 1000;
$( function(){
$('#ModalForm').dialog(
     modal: true,
     autoOpen: false,
     width: 650,
     height: 450,
     buttons:{ Calculate: function(){calculateTotal();},
                     Close: function(){closeForm();}
function openForm(pFoodTemplateId, pMealTypeId)
var getone = new htmldb_Get('shiny',&APP_ID.,"APPLICATION_PROCESS=DUMMY", &APP_PAGE_ID.); // initialize get
getone.add('P24_TEMPLATEID', pFoodTemplateId);
getone.add('P24_MEALID', pMealTypeId);
gReturn = getone.get();
getone = null;
$('#ModalForm').dialog('open');
function closeForm()
{$('#ModalForm').dialog('close');}
$(document).ready(function()
    {$('a.temppop').click(function() {openForm();});
});The class of the button (or in my case, the link in another region that's not displayed as a popup) is temppop.
QUESTION:_
How do I edit my existing code, so that it can now display another region?
The ID of the region it displays now is ModalPopup. I would like to add another region, with another ID off course. Pick any ID, as long as you can explain to me how.

Magali wrote:
Hello all!
I have a popup that displays a report region. I now want it to display more than one region, say a report region and another report region underneath it.
Here's the code that I currently have (and this one can popup one region):
$.fx.speeds._default = 1000;
$( function(){
$('#ModalForm').dialog(
modal: true,
autoOpen: false,
width: 650,
height: 450,
buttons:{ Calculate: function(){calculateTotal();},
Close: function(){closeForm();}
function openForm(pFoodTemplateId, pMealTypeId)
var getone = new htmldb_Get('shiny',&APP_ID.,"APPLICATION_PROCESS=DUMMY", &APP_PAGE_ID.); // initialize get
getone.add('P24_TEMPLATEID', pFoodTemplateId);
getone.add('P24_MEALID', pMealTypeId);
gReturn = getone.get();
getone = null;
$('#ModalForm').dialog('open');
function closeForm()
{$('#ModalForm').dialog('close');}
$(document).ready(function()
{$('a.temppop').click(function() {openForm();});
});The class of the button (or in my case, the link in another region that's not displayed as a popup) is temppop.
QUESTION:_
How do I edit my existing code, so that it can now display another region?
The ID of the region it displays now is ModalPopup. I would like to add another region, with another ID off course. Pick any ID, as long as you can explain to me how.First build your dialog for new ID (please replace NEWREGIONID with your region static id)
$( function(){
$('#NEWREGIONID').dialog(
modal: true,
autoOpen: false,
width: 650,
height: 450,
buttons:{ Calculate: function(){calculateTotal();},
Close: function(){closeForm();}
And now you could open or close the dialog
$('#NEWREGIONID').dialog('open');

How do I display more than one month calendar in the day-view?

iCal has always had a nice feature that allowed me to display little, what I call, mini-month calendars while in the day-view. This allowed me to quickly jump to a day two or three (or more) months ahead (or behind) to check appointments on that day or set an appointment, without switching out of the day-view.
The mini-month was a small clickable calendar that looked something like this:
1 2 3 4 5 6 7
8 9 10 11 12 13 14
15 16 17 18 19 20 21
22 23 24 25 26 27 28
There was also a forward and backward arrow box [ < ][ > ] that allowed me to quickly scroll to the mini-month to find the day I wanted to click into. And, if I wanted to give it more room by adjusting the frame, I could display up to three months at a time within my day view.
Since upgrading iCal to 5.0 with the Lion upgrade, I can no longer display more than the current mini-month calendar on the day view.
This is REALLY inconvenient. Now, there is no way (that I know of) for me to stay in the day view and be able to jump ahead to a specific day two or three months out, or even to a day in the NEXT month without either going to the year view (a big waste of time) or click on the last day of the current month and then clicking the ">" day arrow to get to the next day which then shows that month's mini-calendar.
How do I display more than the current month's mini-month calendar in the day view on Lion?

Unfortunately you can't do what you want. Many people have complained to Apple about this. I suggest you provide Apple feedback directly at http://www.apple.com/feedback/macosx.html. They will not provide a direct response but hopefully if enough people provide feedback Apple will fix this.

How to display more than one documents on windows 8 desktop?

how to display more than one documents on windows 8 desktop?

Adobe Reader Touch doesn't show more than one file on screen and doesn't show them on the desktop. Apparently these are very old fashioned things that Microsoft doesn't think we'll want to do any more and calls them "legacy" to make them sound antiquated.
If you want to do these things use the legacy Adobe Reader, a much more powerful and flexible app (and not obsolete in the slightest). http://get.adobe.com/reader . There are no legacy apps in the Windows App Store.

How can I DISPLAY MORE THAN ONE ROW OF PHOTOS WHEN CREATING A BOOK?

Can I display more than A SINGLE ROW of ohotos on the right side of the page when I am creating a photo book? I have 500 pics and this single bar is ridiculous.

Command (right) - click on a photo in the Photo tray and select Small Photo from the contextual menu:
This will give you two columns of photos.
To reduce the number of photos to select from one can select only Unplaced Photos to be displayed in the tray.
Happy Holidays

How to display more than 10 rows in an Auto Updating Report

I followed Carl Backstorm's example, http://htmldb.oracle.com/pls/otn/f?p=11933:40:525653462286833::NO:RP:: to create a page with an auto update report/region. It's working fine (thanks, Carl) but I can't have the report display all rows (38 rows in total). Everytime I press the "Manual Refresh" button, it shows 10 (the first 10) rows only.
When the report displays at the first time, it shows all the rows (38 rows). Number of Rows and Maximum Row Count are set to 999999 and "No Pagination Selected" in the report region. But after I press the "Manual Refresh" button or specifiy an update time value (like 1 second) to have it auto update, then it only display the first 10 rows.
Is there a way to display more than 10 rows in an Auto Updating Report using Carl's example auto update report/page? Anyone can help? Thank you.
-Michele
Edited by: 106451 on Jun 30, 2010 10:12 AM

Yes, I changed it to:
function table_object(pId){
     this.id = pId;
     this.start_record = 1;          //optional
     this.num_record = 50; //optional
     this.num_record2 = 50;          //optional
I don't quite understand how these vaiables are used for though. Thanks.

How to display more than 255 chars in background job with ALV Grid ????

Hi All,
I am using ALV grid with OO.
I have used call screen for ALV grid display. I have to display more than 255 characters in width. While running it, I can see the list perfectly.
But in background mode, the list is truncated after 255 chars.
Can anybody help how to send complete list(width more than 255 chars) to spool.
Thanks and Regards,
Neha

Hi SAP fan,
YES you can run the ALV report in background mode.
To run the report in background do F9 instead of F8, then give immediate and save.
Now goto Sm35 goto job overview and view the job listed
Choose the job and press the spool button. It will show the list created on the next page. When u clcik the list u can see the ALV output.
To see this the job should be in the finished status.
How to define Periodic Jobs
1.Execute transaction SM36
2.Define Job name, Job class, Target server
3.Click on 'START CONDITION' button
4.Click on 'Date/Time' button
5.Enter Scheduled start DATE & TIME. Check mark 'Periodic Job' field. Click on 'Period values' button and select 'Hourly' or 'Dialy' or 'Weekly' or 'Monthly' or Other period and SAVE. Go back to main screen.
6.Click on 'STEPS' button and enter Program name and Variant under box 'ABAP Program'. Click on 'Print Specification' button and enter Printer name under 'Output device' and SAVE
7.Click on SAVE button until you get message on bottom of the screen that describes 'Job XYZ saved with status: Scheduled'.
8.Click on 'Job overview' button or execute SM37 transaction.
9.Select the appropriate 'Job name', 'User name', 'Job Status' & Schedule date under 'Job start condition' and click on 'Execute' button or press F8.
10.You will now see all your scheduled JOBS.
Case: 2
You can Run in Background but make sure it is alv list, not alv Grid FM. if you are uisng alv list not problem , but if you are using alv grid then you can code like this..
if sy-batch = ' '.
call 'REUSE_ALV_GRID_DISPLAY'.
else.
call 'REUSE_ALV_LIST_DISPLAY'.
endif.
if you are using OO alv then write this code..
CALL METHOD cl_gui_alv_grid=>offline
 RECEIVING e_offline = off.
 IF off IS INITIAL.
 CREATE OBJECT g_custom_container
 EXPORTING container_name = g_container.
 ENDIF.
Case: 3
if you are using OO ALV.
Just before creating the custom container check for the following condition.
Batch or Web Reporting
IF cl_gui_alv_grid=>offline( ) IS INITIAL.
CREATE OBJECT o_custcontainer
EXPORTING
container_name = lc_custcontrol
EXCEPTIONS
cntl_error = 1
cntl_system_error = 2
create_error = 3
lifetime_error = 4
lifetime_dynpro_dynpro_link = 5
OTHERS = 6
ENDIF.
You can see the output in Spool in transaction SP01.
Good Luck and thanks
AK

Power view display more than 500 values in a field

From my research, it looks like the limit of values in a Power View filter is 500. does anyone if this is configurable to increase (which
I am doubting based on Microsoft’s website as I’ve copied below). If it is not configurable and we cannot display more than 500 values when filtering, then what should be done
https://technet.microsoft.com/en-us/library/hh231514%28v=sql.110%29.aspx

You could always do the concatenation on the client. ie: "select action1, action2 from tableX" and then create a boilerplate object with text that references both of these columns. (eg: "&<action1> &<action2>"). This should give you the concatenation you're after.
Another alternative is to return a "long" column instead. The 4000 is probably down to the varchar datatype restriction.

Displaying more than one display attribute in a tree component problem

Hi,
I have a parent table and child table, I want to display a parent table's display attribute and below that i want to display child tables two display attributes (while defining the rule for a tree compoment).
What i'm getting is :
I can able to display more than one "display attributes" for my parent table, but when i'm trying to implement that for my child table under my parent table. I am only geting the blank folder structure without names.
For example:
Parent table: Deparetment(id, name)
child table: Employee(id, firstName, lastName)
What i want is:
In a Tree:-
(Department name): software below that i want display both (firstName and LastName) stephen Fleming
for that employee.

Hi,
do you use ADF ? If yes, have a look at "master table with inline detail" option when dragging the master View
Frank

Display more than 2 measures in Bullet chart

Similar Messages

Maybe you are looking for