Display Not Filling Screen After Windows 10 Upgrade

After performing Windows 10 upgrade the display on the monitor has a one inch vacant area around the entire display. The resolution is set correctly to 1920 x 1080. There is no way of extending it through the display settings in the PC. The upgrade was made from Windows 7. I have checked via HP and there is no Windows 10 driver available for this monitor even though Microsoft qualified all software and hardware compatible for the upgrade. The adapter is version 8.970.100.9001, dated 1/13/15. I don't know if the graphics card, ATI Radeon HD 4350 connected via HDMI, has any affect on this problem. I would appreciate any help.

I have the same problem with this monitor on using my HP Pavilion dv6 with an ATI Mobility 4200 series chip. The problem is caused by the driver inserting overscan into the picture. I can't find a way to tell Windows 10 to remove the overscan, and the Catalyst Control Center is not compatible with Win10 either. I wonder if this monitor is reporting itself as a "TV" and that's the issue: if so, a driver update could fix it.

Similar Messages

Color Calibrator can't work properly due to display not filling screen.

I have a Thinkpad W520 with the HD 1920x1080 display and the color sensor. I tried to run the Color Calibrator application but it always runs to completion but cannot process the measurements. So I opened the lid in the middle of a calibration and discovered that the color screen that is supposed to be viewed by the sensor is not full screen, thereby preventing the sensor from measuring the color. How can I set the graphics so that this app will display full screen when it runs? Thanks.
Solved!
Go to Solution.

Yes I am. But I just solved the problem. I had adjusted my display to show text, icons, etc at 150% of normal resolution. Somehow it was causing the application to display only a partial screen. I set the magnification to 125% and now the color calibrator works fine.

Beats Audio Control Panel software not working after Windows 10 upgrade.

Beats Audio Control Panel software not working after Windows 10 upgrade. the Beats sound enhancement is useless in WIndows 10. When opening the Windows 10 sound properties I'm getting this box message: Auido enhancement problem Windows has detected the audio enhancement for the following device are causing problems: Speakers / Headphones (IDT High Definition Audio Codec) Woud you like to disable driver enhancement for this device? IDT High Definition Audio CodecBeats Audio Control Panel version6.10.6491.02013.11.2009:43:18 Please provide some kind of fix for this?

Well, it has been a long road on the Win 10 upgrade. At first I got the same error message as above, but after deleting the Dolby Advanced Audio v2 in Win 10 using Control Panel Programs and Features and rebooting, I got into the continual BSOD upon reboot. Here are the steps I took to at least get stable on Windows 10. First, I rolled back to Windows 8.1 using the advanced feature in the BSOD recovery options. Once back in Win 8.1, I deleted the Dolby Advanced Audio v2 using Add/Remove Programs in Control Panel. Then I downloaded the Win 10 update and re-installed it. Once that completed, I updated the Intel Graphics driver under the display adapters (on my G780 it is an Intel HD Graphics 4000, and the driver can be found at https://downloadcenter.intel.com/). Currently I am running version 10.18.10.4252 for my machine. Then, under the Device Manager, I updated the Conexant SmartAudio HD driver under the Sound, video, and game controllers. That driver is currently at 8.66.4.50 and was automatically downloaded from the web when I requested to update driver. I also changed several others settings such as Notify to schedule restart after updates are installed instead of automatic (under Settings --> Update & Security --> Advanced Options) and Do you want Windows to download driver software and realistic icons for your devices? --> No, let me choose what to do, never install driver software from Windows Update. After that, I shut down the machine, waited a moment and booted back up. I have no idea why this helped or if it is overkill, but I am stable and running without a fear of rebooting now. Hope this helps if someone else is having this same issue.

Bought a new monitor.. wide screen 23"... Firefox is not filling the full window. IE works fine but I prefer Firefox. What do I need to do to fill entire window, not just the way it was with the old monitor?

Bought a new monitor.. wide screen 23"... Firefox is not filling the full window. IE works fine but I prefer Firefox. What do I need to do to fill entire window, not just the way it was with the old monitor? edit

Most pages are defined to be a certain size, regardless of how large or small your monitor is. You can use Firefox's zoom feature (View menu) to enlarge the text and images (or just the text, if you prefer) on a page.
In addition to making individual site adjustments, there are some add-ons that will default every site to a higher zoom level. For example, check out:
* [https://addons.mozilla.org/en-US/firefox/addon/6965/ Default FullZoom Level]
* [https://addons.mozilla.org/en-US/firefox/addon/2592/ NoSquint]
Does that help?

Satellite C55-A5182 - Screen flickering after windows 10 upgrade.

Satellite C55-A5182: screen flickers after windows 10 upgrade....help!!!

Hi there , Thank you for visiting the HP Support Forums and Welcome! This is a great site to get answers and ask questions. I read your post on the HP Support Forums and I understand that you are having an issue with the Touchscreen on your HP Notebook - 15-ac020nr. You had mentioned that since your Windows 10 Upgrade, it no longer works. Have you tried doing all updates (Windows, HP Support Assistant, BIOS)?Have you tried restarting the Notebook a couple of times?Have you tried to run the Windows Troubleshooter? Here is a link to the HP Support Assistant. Just download and run the application and it will help with the software and drivers on your system that need updating for Windows 10. The HP Support Assistant will also help find a proper driver for you to use. Updated Windows 10 drivers will become available on the HP Drivers and Downloads Page for your product. They will be released as they become available to HP. I did find a troubleshooting document for you called Touch Screen Issues. Although it does say it is for Windows 8, it will still work for Windows 10. Please follow the provided troubleshooting steps and re-post with the results. Have a great day!

Camera app not shown on lock screen after iOS 5 upgrade

Camera app not shown on lock screen after ios 5 upgrade. Help!!

Push your home button twice at the lock screen.

Skype does not recognize my headset after Windows 10 upgrade

Hi everyoneSkype stopped recognizing my headset after Windows 10 upgrade. I've tried the solution deactivating the "Allow applications to take exclusive control of this device" option. No success. The headset works on my other Windows 8.1 laptop and my Cellphone. Other applications, including Windows 10 microphone setup for speech recognition work. Here is something strange though. When I open up Skype audio tools and tap the microphone between thumb/finger Skype detects this and shows 4/5 green bars. Any ideas?
Voiceless in Vancouver

Your upgrade haven't changed the drivers properly.
1. Just go to Device Manager and delete the audio drivers.
2. Then restart your pc and switch on the internet.
3. Your drivers will be automatically installed by Windows Update.
** If your problem is solved then Mark this as Answer! **
** Please give Kudos If you want to Thank Me! **

Satellite A300D-15B - Webcam won't work after Windows 7 upgrade

My webcam doesnt work after Windows 7 upgrade. I have installed the drivers but still having no luck

Hi
The webcam is listed in device manager under the Imaging devices
There you should see USB Video Device.
If its not listed there, then I think that the device malfunctions or its disconnected.
The webcam is an usb device and its connected to USB controller.
I read in different threads that in some cases the cable could be loose and therefore the webcam would not be listed in device manager.
I such case the display lid needs to be disassembled and the cables should be checked.
In my opinion its a job for an technician.

Hit something when editing presentation and now slides are all reduced in size and not filling screen. Preferences, scale to fit doesn't work. What did I do?

Hit something when editing presentation and now slides are all reduced in size and not filling screen. Preferences, scale to fit doesn't work. What did I do?

Please give complete details of your system and the media and the project properties.

My laptop become blue screen after windows logo, after i update the graphic ati and intel driver

I have constant blue screen after windows logo and i have updated all drivers. i was upset the blue screen didn't go away and i did the factory reset. For my suprise, it didn't solve the problem and then i repair it at the comp shop. it was installed with windows 7 home premium 64 (pavilion g4 1006tx) bit as the pre installed windows and activated with the key back on sticker. I updated all drivers and i noticed every time i update the ati and intel driver it will go blue screen after windows logo. after i uninstall it at in safe mode it can load normally. My question is there any solution for my graphic card or is it already damaged? or any other hardware problem? please because i have to use high graphic as i use photoshop

hii
make sure you download and update correct driver version of graphic
and know spec
more:
http://support.hp.com/us-en/drivers/selfservice/HP-Pavilion-g4-Notebook-PC-series/5046252/model/5068...
try to instal "AMD High-Definition Graphics Driver" only
and uninstal "Intel High-Definition (HD) Graphics Driver"
Wisnu Suryandi

No internet after windows 10 upgrade-Ralink RT3290wi-fi adapter

I have a Ralink RT3290wi-fi adapter . There is no internet after windows 10 upgrade. What i need to do or is there a driver for this adapter for windows 10. Please suggest Thanks Samrat

there are several posts about this on the microsoft forums about no internet after upgrading. here is one that migt help http://answers.microsoft.com/en-us/windows/forum/windows_10-networking/after-upgrading-from-windows-81-to-windows-10-no/42b1852e-4faa-47a2-85ca-dc8e190c7c27 here is another http://answers.microsoft.com/en-us/windows/forum/windows_10-networking/windows-10-network-adapter-problems/3e11b955-1e5f-43e0-8891-7fef24e693dd

Why is the a505 series not compatible for the windows 10 upgrade

Why is the a505 series not compatible for the windows 10 upgrade. It does not show up in the system available for the upgrade.

Nobody said that it wasn't compatible. Microsoft makes that determination. Toshiba, however, has chosen not to write new utilities and drivers for it for Windows 10.

Black Screen After Windows 8 64-bit Upgrade (Clean Install) on TouchSmart IQ508A (IQ500 series)

Hi there,
Just installed Windows 8 and am getting a black screen after booting up like many others. I currently have disabled the graphics driver and this has solved the black screen issue but I can no longer use my web cam for Skype (although web cam works for W8 Camera App oddly).
To date I have tried the following:
Loading up the latest Nvidia drivers from the Nvidia website
Attempting to use the drivers for Windows 7 both in compatability mode and normally. I unzipped SP44488 to get this working
I know many others are having this problem so I really would like someone from HP to respond and state whether a Windows 8 display driver for the Nvidia GE Force 9300M GS is being developed.
I ran the compatability wizard prior to the clean install and it came up with no issues so I am very disappointed I am having these problems.
I've found out that HP have a customised version of the above card so that explains why the Nvidia drivers dont work so I believe HP is therefore obligated to provide a driver.
If anyone else is having similar issues please respond as this will hopefully lead to more action.
cheers
Steve

I'm in the same boat. On my IQ804, the Nvidia GE Force 9300M GS card crashes when I use NVidia's latest Windows 8 driver and Microsoft's LIVE UPDATE drivers. I have to resort to the Standard VGA driver in order for the pc not to crash into a black screen.
I read on another forum you can try installing a July 2012 version of the driver from NVidia and that should solve the problem. I tried it once. Using the July 2012 version, the screen would stay on longer, but eventually it crashes into a black screen...but definitely more usable than the latest from NVidia and Microsoft.
I too have heard that HP used a customized version of the graphics card and that's why neither HP nor NVidia's drivers work.
I also tried installing the Nvidia GE Force 9300M GS drivers for Windows 7 that I downloaded from the HP website. It didn't work either. It actually failed to install altogether, saying my system is incompatible.
As is, the pc works fine. But videos and games that require motion is noticably choppy.
Any help from HP??

Satellite A500 fn keys not working at all after windows 7 upgrade

Hi everyone,
I'm using Satellite A500 which i just did the windows 7 upgrade (32 bit) yesterday, however, i can no longer use the FN key on the keyboard which i'd use it very often.
can anybody help??? much appreciated!!
mav

Hi, thanks for your reply,
I'd some search on the forum, however, there're some similar issue, but they are not A500 model, so i m not sure it's reference.
yeah i did download and install the value added package, and restarted my flash cards, and i did change the setting of the flash card, at least now i can use it by moving my mouse to the top of the screen and they pop up. but yet, the FN key still not working at all.
i couldnt really find "common modules" or "hot key" to download, could anyone post the link here? if that would make my FN key work just like before?
Thanks alot!

Satellite L500 - After Windows 7 upgrade games not run in fullscreen mode

Hello..
I just got my windows 7 upgrade in the mail and I installed it and everything is fine..
But if I start a game which is not in the same screen resulution as the computer it is a square in the middle of the screen and it is two big black lines down on each side. It does not put the game in full screen. The games in the same resulution works fine.
Some games cannot be put to the resulution this computer have.
How can I make then come in fullscreen?
thank you

I tryed to update the driver to no affect....
The games are in a fullscreen mode but with black lines on the side it does not understand its a widescreen =/ it worked well on vista....
the known games that have this issue is:
Age of Empires
Saint Rows 2
Emergency/911 first responders 3 and 4
GTA san andreas
The sims 2
Euro Truck Simulator
Swat 4
easyer sayd most of the games with has not 1366 X 768 as an resulution option
(they are playable but its kinda annoying to have a big screen an the game just uses a 50% of it and the rest is black..
-thanks

Display Not Filling Screen After Windows 10 Upgrade

Similar Messages

Maybe you are looking for