Display not working, external display does, but blue screen when windows loads

Hi folks, wondering if anyone can help.
My DV6's display is no longer working. An external VGA display works, but when it gets to the "welcome" screen as it loads into windows, I get a blue screen. I was able to load into safe mode previously, but I foolishly reformatted and reinstalled windows thinking it might solve the problem. Now I can't even get into safe mode because it won't allow a first time setup of Windows in safe mode.
I suspect this may be the death of my loyal notebook, but was hoping someone could propose a solution.
Thanks!

HI @Mikep037,
Thank you for your query, I am happy to assist you!
I understand that you are having an issue with your display.
You have reformatted and reinstalled Windows but are unable to complete the setup.
Did you do a recovery or did you reinstall Windows from a retail disk?
First I would try a hard reset. HP Notebook PCs - Use Hard Reset to Resolve Hardware and Software Issues. Please be sure to remove any CD/DVD from tray and disconnect all externals devices or USB's.
HP Notebook PCs - Overview of How to Troubleshoot Problems When a Computer Does Not Start Up or Boot...
Here links to aid with the recovery process.
HP PCs - Performing an HP system recovery (Windows 7)
HP Notebook PCs - System Recovery May Fail or Display Error Message (Windows 7, or Vista)
Best of Luck!
Sparkles1
I work on behalf of HP
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the bottom right to say “Thanks” for helping!

Similar Messages

I had to erase my hard drive and then reinstall everything back from my passport external hard drive. Now my iPhoto edit is not working. I get a blank screen when I want to edit. The photos show up in the library but I cannot edit them. Help?

I had to erase my hard drive and then reinstall everything back from my passport external hard drive. Now my iPhoto edit is not working. I get a blank screen when I want to edit. The photos show up in the library but I cannot edit them. Help?

There are several possible causes for the Black Screen issue
*1. Permissions in the Library* : Back Up and try rebuild the library: hold down the command and option (or alt) keys while launching iPhoto. Use the resulting dialogue to rebuild. Include the option to check and repair permissions.
*2. Minor Database corruption*: Back Up and try rebuild the library: hold down the command and option (or alt) keys while launching iPhoto. Use the resulting dialogue to rebuild.
*3. A Damaged Photo*: Select one of the affected photos in the iPhoto Window and right click on it. From the resulting menu select 'Show File (or 'Show Original File' if that's available). Will the file open in Preview? If not then the file is damaged. Time to restore from your back up.
*4. A corrupted iPhoto Cache*: Trash the com.apple.iPhoto folder from HD/Users/Your Name/Library/ Caches...
*5. A corrupted preference file*: Trash the com.apple.iPhoto.plist file from the HD/Users/ Your Name / library / preferences folder. (Remember you'll need to reset your User options afterwards. These include minor settings like the window colour and so on. Note: If you've moved your library you'll need to point iPhoto at it again.)
If none of these help:
As a Test:
Hold down the option (or alt) key key and launch iPhoto. From the resulting menu select 'Create Library'
Import a few pics into this new, blank library. Is the Problem repeated there?
Regards
TD

Apps update not working. Was before but latest updates won't load to update.

I have updates waiting to be loaded but when I click on the update tab, it is frozen and won't even bring up the list of what needs updated. Just shows that I have 3 apps that need updates.Has been working until 2 days ago. Tried a restart but still the same issue.

You are not alone. these are just a few of the discussions going on right now about this. There must be a problem on Apple's end and they will have to fix it.
                 Re: My update screen is blank
                 Re: Blank app store upgrades page
                 White screen only for updates
                 Re: App Store Update not working
                 My app updates won't come up for updating

Blue screen when leopard loads

Hi just wondering Does anyone else see a blue screen just before leopard loads up? It when i start my cpu after the apple logo and spinning wheel, then it goes to a blank blue screen for a second, then the desktop. Just wondering if that was normal. Thanks

I also have the "Blue screen blues" It lasts about 4 minutes on my machine in both 10.5.2 and 10.5.3. I thought it was the .5.3 update and went back to my10.5.2 from a clone that was made just before doing the last update.
On reviewing my console log the delay happens after the firewire controllers load. 4 minutes then this.... Timeout waiting for IOKit to be quiet
Anyone have a solution?
I still have a drive with Panther on it for the use of Classic if needed and there is no delay when booting it. ( panther was fast & solid for me, I miss it. I only upgraded because CS 3 required me to. )

Why is my text messaging app is not working at all, is a blank screen? Help!!!

My text messaging app is not working at all is a blank screen when I open it! Help!!!

Abdussalam.A,
you mentioned that Terminal does not work at all for your MacBook Pro. What currently happens when you run Terminal? In what way does it not work?

My ipad screen is black and will not reset and does not come back after restoring, the info is still on internal because i can see it on itunes in the apps catagory it's the display is not working, can see backlight but black...does anyone know how to fix

my ipad screen is black and will not reset and does not come back after restoring, the info is still on internal because i can see it on itunes in the apps catagory it's the display is not working, can see backlight but black...does anyone know how to fix, other than take it to apple.
thanks!

The wish list only works on apps you have to pay for. To get it tap the icon of the app you want to save. After it opens at the upper right corner is a box with a arrow. Tap that then tap add to wish list list in the box that opens.

Thinkpad Edge S430 - Windows does not detect external display connected via HDMI

On a Thinkpad S430 with HD4000 integrated graphics, an external display connected via a HDMI cable is not detected at all when using Windows. The system is fully updated as of the time of posting this message, both via the Lenovo Update tool as well as Windows update.
The Intel driver version is 8.15.10.2696. It appears that this is the latest version, since it does not offer an update when I try to auto-update it via Device Manager.
NB: I am running Ubuntu 12.04 with kernel 3.4.0 on the same machine, and the external display works perfectly fine with this software configuration.
Hence I think that it's very likely that this is a Windows-specific driver issue.
Would Lenovo happen to have a driver update in the works? Alternatively, I will be thankful for any suggestions about possible resolution of this problem.

skn2011 wrote:
My Macbook Pro notbook 13.3" does not detect external display throught it's mini display port to HDMI connector when connected to Sony Bravia 32" LCD TV.Can anyone help me get the answer as i tried reading everywhere on internet and none does not seems to work.Please help me out guys.
Are you using the Apple adaptor or a 3rd party

MBA mid-2012 does not see external display on wakeup

My mid-2012 MBA does not see external displays on wakeup. VERY annoying
I have a BenQ 24" HD display connected by HDMI and it is not seen by the Air on wakeup. I have to open the laptop, pull the mini-DV plug out 3 or 4 times before the display is recognised - some of the time. Most of the time requires a reboot with multiple cable/plug inserts.
What an absolute POS this mid-2012 MBA is! Apple finally fixed the garbage colours on external displays in 10.8.4 but the issue of recognisisng external displays remains. Its a crock. Totally regret buyiing this POS.
Have reset PRAM, SMS, cleared prefs etc etc ad nauseum. No solution with any of them. After almost a year of this garbage, the laptop is close to being thrown out as e-waste.

macbook pro 13" 2012
osx 10.8.4
adaptor
http://www.maplin.co.uk/mini-displayport-to-dvi-adaptor-454323
display: philips 230c1hsb
i have reset PRAM but nothing happens

The "portable document format" icon is a Word 2010 icon, so selecting Adobe Reader as action does not work to display the PDF.

In the Applications tab -- Content Type -- the "portable document format" icon is a Word 2010 icon (not Adobe), so selecting Adobe Reader or preview in Firefox as action does not work to display the PDF. I can see this Applications difference because my other Firefox laptop has the Adobe icon, and I can view PDFs. Essentially, a PDF is coming in as a Word document -- and the computer tries to open it up as a Word file.
How do I get the correct PDF icon in the Applications list -- the same way it displays (and works) on my other laptop.

Adobe PDF Plug-In For Firefox and Netscape 10.1.7 ?
I think you need to add this to the list of applications and the action to take on the type of content. This can also be managed in the about:permissions page. [[Permissions Manager - Give certain websites the ability to store passwords, set cookies and more]]

MacBook Air - windows 7 / Bootcamp - External Display NOT WORKING

I run Windows 7 (Bootcamp) on a 9/2011 MacBook Air, how can I run an external display? Settings only give single display option there seems to be no way to either just display on an external display or to extend to an external display. Is this a bug?

You also may want to post in the Boot Camp forum, there may be some MBA users that can help you.

Broken LCD - Can not get external Display

My screen is no longer good so im trying to connect a external display.
Been trying for hours trying to get the external display to work of boot.
Ive tryed everything changing 2 sets of hd cables and svga cables. The funcion key.
The Laptop does reconize the display but seems to go into powersave mode or something.
The only way i can get the external display to work is if i pull the battery and wait a bit then power
up the display will work with a notice on the screen that cmos will be reset to defaults then restarts
and back to where i was again... Im thinking it something in the bios thats causing this.
Thank you and hope i can figure this out.
Pavillion dm4-1160us
This question was solved.
View Solution.

HI Ezfilez,
I understand you are having an issue with the external display on your Windows 7 computer.
Sometimes it is in the BIOS. If you follow the link and update it should help resolve your issue.
http://h10025.www1.hp.com/ewfrf/wc/document?cc=us&lc=en&dlc=en&docname=bph07110
Please let me know if you require further assistance.
Thanks
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the bottom to say “Thanks” for helping!

Caller display not worked since June 2014

On 26/06/14 I reported a fault (VOL-**********) that the caller display function had stopped working following a thunderstorm in the area. According to the fault status this fault is showing as being corrected and closed on 02/07/14 when in fact the fault still exists. I tested the line using the BT test socket with a new BT2000 phone and this displayed ‘incoming call’ therefore my internal wiring is not part of the problem. I have also dialled the test code *#234# to check if the caller display service is available and confirmed that it is. I then tested the new BT2000 phone on the neighbour’s telephone line and this showed the caller ID for incoming calls, as did my other telephone as well; therefore none of the telephone handsets are at fault. Three times BT have informed me that the fault has been fixed and yet I still have no caller display. Reading through the forums it would appear that other people have encountered similar issues and that the problem is at the exchange, “An Openreach engineer discovered that the RS232 burst transferring the CLI number up the line was too weak and he then went down to the exchange to investigate. He then discovered that the fault lay in the ADSL device which lies between the analogue exchange equipment and the outgoing line”.
I’m surprised to see that BT are taking so long to trace a fault in their system last raised 5/8/2014 (VOL012-**********) and that they haven’t sent an engineer to the property or to the exchange to check the problem.
My patience is wearing thin over this problem with my Caller Display not working as it started in mid June. I’m also becoming less enthusiastic about BT and find it harder to recommend them to others.
My last message from BT, tells me that it should be back to normal on the 8 August. However, it is still not working. Their message that my phone should be back to normal now and if it isn’t report this to BT, is ridiculous. If an engineer had investigated what was causing the fault and found it, then he would have fixed it. However, either an engineer has not investigated the fault or BT is not competent in fixing their own service faults and makes these statements with crossed fingers?

An engineer called yesterday and told me that he had been asked to test the line for a voice fault not a Caller Display fault. However, his testing revealed there is no line fault, CLI signal is strong and he was happy that the new BT2000 phone (bought after the lightning strike) is working properly. (This phone had also been tested on a neighbour’s phone line where it displayed the callers number). He also found that this same BT2000 phone on my line was not displaying the Caller’s number (CLI), but couldn’t offer any reason why.
I conjectured with him that these tests must bring the problem down to a corrupted CLI signal which does not allow the phone to understand the phone number being sent.
When the lightning struck the phone line back in June, it blew the telephone connection in the back of the Sky Box with a flash and bang (telephone cable now removed from the Sky box). It shorted the Openreach Faceplate (now replaced) so that the phones and broadband stopped working and it caused the phone to light up and react as it does when a call comes through.
Now isn’t it possible that the lightning also travelled along the copper wire to the green cabinet just outside the house and damaged something there which is corrupting the CLI signal, but which does not not show up when the voice line is tested? If not, then there must be a problem further back in the infrastructure, possibly in the Exchange, that is causing a corrupted signal to be sent to my phone?
He told me that another team would have to investigate the Caller Display fault as he was instructed to look into a voice issue and as a field engineer he was not able to investigate any problem that might be in the Exchange. I don’t know whether this Exchange Team would be able to investigate a problem in the Cabinet if nothing is found in the Exchange or can that only be done by a field engineer? He told me to contact BT again as he’d done all that he had been instructed to do and they would have to instigate a fault team to further investigate the problem.
When all this is considered we have the basic problem that BT are unable to provide me with a Privacy and Caller Display Service that I have been paying for, because of a fault in their infrastructure. How much longer is it going to take before they correct the problem that’s been going on since June 2014?

Unibody MBP owners with *working* external displays, please chime in.

I'm trying to determine if there's any use at this time to try to exchange the MBP (unibody) I have now with another unit in the hopes of getting proper external display support. (To be clear, I'm referring to the external display problems many of us are having, like in this thread, and this one, and others.)
I'm sure there are others suffering from this problem who are simply seeking another datapoint in determining whether or not exchanging one's unibody MBP for another are of any use at this time. So the question here is:
If you have a unibody MBP, and you are successfully driving an external monitor without issue (using the Mini DisplayPort to DVI Adapter), can you kindly post the following information?
1) External display model (manufacturer and model)
2) External display screen resolution
3) Any information about DVI cable, length, brand if applicable, etc.
4) Have you confirmed proper operation in both 9400 and 9600 GPU modes?
5) If you know, is your MBP equipped with the 9c84 or 9c85 built-in display panel?
6) If your setup wasn't originally working, but now is working due to a unit swap or swapping out of the Mini DisplayPort to DVI Adapter with a new one, can you kindly note that?
Please do not consider yourself representative of a properly working external display setup if yours looks mostly good, with just minor artifacting--that is, for the purpose of this thread, please consider "working" to mean only perfectly normal operation of an external monitor from your unibody MBP.
Are all of the above points necessarily relevant? I don't know yet, but I figured it's best to try to get as much information from those who have working units, to try to determine what's relevant and what isn't.
Why am I asking this? Because I've already wasted enough time with this unibody MacBook Pro, now on my third unit, and I do not want to waste time making trips to the store to exchange units (and the time necessary for restoring to the new unit, etc.) if it's not going to help things. (The previous two replacements had nothing to do with this particular problem, and I didn't have my external display until the third unit, so have no idea if the previous two suffered from this particular problem or not.) If it seems that an exchange from one unibody MBP to another isn't going to help, then those of us who need to resolve this might learn more information with which to make a decision. Right now, I'm seriously considering exchanging for the current 17" MBP with matte display, even though it's not the new unibody design, and doesn't quite match up in the specifications with the new 15" MBP--I just need to get my setup working, and figure the older style of the 17" might be more tested and worked out.
Thanks in advance to those of you who fit the bill and answer these questions.
NOTE: If you have more relevant information to ask of those with working setups, please do; but please avoid the discussion of your problems if you're among the ones (like me) with external display issues, as there are other threads for the discussion of that (like the ones linked above). Ideally, I envision this thread as more populated by the responses of those with working setups.
Message was edited by: isonoise
Message was edited by: isonoise

Mine works perfect.. This is AFTER a logic board replacement for the 9600's BSOD problem
1) Dell 2007WMP
2) 1680x1050
3) Cable that came with monitor
4) Post repair only really using 9600, though 9400 seemed fine too
5) LG (9C84)
6) Logic board replaced last week for BSOD problem. (That board had external monitor refusing to wake problem as well).
Message was edited by: Robert Derelanko

Thunderbolt display not working on Macbook Pro - previously the display did work

Thunderbolt display not working on Macbook Pro - previously the display did work

I have upgraded ML but when the MBP tries to restart with the upgrade the MBP does not restart so I susapect the ML upgrade is not complete ? When you refer to 10.8.5 supplemental is this a separate upgrade ? When I connect the Thunderbolt to the MBP the Thunderbolt charges my MBP & I can play music from iTunes via the Thunderbolt. It is only the display that is not working on the Thunderbolt

Display not working

Hi,
I am using Lenovo G510 Laptop. First I was getting an error of bad signature file which was stopping windows from loading.
I tried to fix it. I changed my BIOS Boot mode from UEFI to Legacy, and then system restarted. After the restart Display is totally black, like the Laptop is powered off. Hard disk light is on, battery power light also turns on when I turn on the laptop. But not showing any display. I've also tried by pulling out the battery and then pressing the power button for 30-60 seconds and then turning laptop on direct power. But it ain't working too.
Please any help in this matter will be highly appreciated.
Regards

Dear sir,
I gave my laptop to an HP authorized service centre in Ernakulum (Vertex techno solutions Bangalore Pvt ltd, Ernakulum) No: 2550, on 04/12/2014 . Same time i registered my laptop complaint in hp customer support. http://h30434.www3.hp.com/t5/Notebook-Hardware/display-not-working/td-p/4760312, informed me that no complaint to MB and GPU . But service centre informed that complaint in motherboard and asked me to change. When I talk them about the your mail and the details that you provided they suddenly respond they can't repair the laptop at their service center, disconnected the phone. I feel very much disappoint about your authorized customer services. In the mean time I kindly request you to take immediate actions regarding these kind of activities also provide a solution to repair my lap top
Shyju S
Research Fellow

Display not working, external display does, but blue screen when windows loads

Similar Messages

Maybe you are looking for