Display now too large

I used to have a narrow view of contacts that I could have visible all the time. Now it takes half my screen.
How do I get back to the previous view?
Solved!
Go to Solution.

Have you tried the View -> Split Window View mode?

Similar Messages

Mac Mini display is too large for screen on only one user account

Okay, so I left my two year olds alone for a minute playing the "alphabet game" on my Mac Mini. They only had the keyboard, no mouse but managed to muck up my display leaving me a bit frustrated. The screen is now too large for my Samsung display. The only way to see everything (dock, top bar, etc) is to move my mouse arrow to the end of my display and see it roll back onto the page. I've checked the settings there and they are fine. The MacBook Pro plugs right in and is proper resolution. So I then wondered if another account on the Mac Mini would do the same thing. I logged out of my Admin account and into another and everything looks just dandy. I log back into my Admin account and it's too large and blurry again. The resolution is set correct at 1920x1080 at 60 Hz.
What button did they push on my keyboard that would do this and how do I get it back?? Aargh! Thanks all!

Ha, figured it out myself from another discussion forum finally. Thoght I'd share in case anyone else runs into this. They must have hit "Zoom" by htting the "Control" and scroll buttons at the same time..
Resolution:
You can zoom out by holding down the Option and Command buttons on the keyboard and, while you hold them down, pressing the - key.

Since updating Iphone 4 the screen display is too large

Since updating my Iphone 4 the screen display is too large to fit on the screen. For example the green battery graphic is so large half of it takes up the full screen.
I pressed restore and restored the phone. I then restored my backup files and I still have the same problem.
Does anyone have any suggestions?

This is asked and answered many,many times and is covered in the manual ( Zoom feature).
iPhone User Guide (For iOS 4.2 and 4.3 Software)
Double tap with three fingers

HELP! Display appears too large for screen!

Weird thing happening... The display on my iPhone for some reason is appearing too large for the screen, as if I zoomed in on the display slightly. I can't figure out a way to fix this.
Here's what it looks like. Notice the bottom half of the "scroll to unlock" is cut off... the whole thing is off-centered bcause of the zoom) http://i37.tinypic.com/25qvpr4.jpg
I updated to the latest software/etc... because I figured that that might resolve the issue. Restarted the phone. Can't fix. Trying to avoid my local Apple store, since it's an absolute mob scene. Any advice?
Message was edited by: cohanj087

You have zoom on, probably.
http://manuals.info.apple.com/enUS/iPhone_UserGuide.pdf
The manual will tell you how to turn it off.
Page 190:
"Turn Zoom on or off: In Settings, choose General > Accessibility > Zoom and tap the
Zoom On/Off switch.
Note: You cannot use VoiceOver and Zoom at the same time.
Zoom in or out: Double-tap the screen with three fingers. By default, the screen is
magnified by 200 percent. If you manually change the magnification (by using the tap-
and-drag gesture, described below), iPhone automatically returns to that magnification
when you zoom in by double-tapping with three fingers.
Increase magnification: With three fingers, tap and drag toward the top of the
screen (to increase magnification) or toward the bottom of the screen (to decrease
magnification). The tap-and-drag gesture is similar to a double-tap, except you don’t
lift your fingers on the second tap—instead, drag your fingers on the screen. Once you
start dragging, you can drag with a single finger.
Move around the screen: When zoomed in, drag or flick the screen with three fingers.
Once you start dragging, you can drag with a single finger so that you can see more
of the screen. Hold a single finger near the edge of the display to pan to that side of
the screen image. Move your finger closer to the edge to pan more quickly. When you
open a new screen, Zoom always goes to the top-middle of the screen.
"

Video Sharing - Videos upload issue to Vimeo because files are now too large post iOS7.

Videos taken prior to iOS7 update uploaded without issues to Vimeo. Vidoes taken after iOS7 update will not upload because videos are too large. I am videoing the same type of activities for the same duration post iOS7 as I was pre-iOS7. What has changed with iOS7 that is causing my videos to be saved as larger files? This is a HUGE issue for what I do! HELP PLEASE!!

You're going to have to edit them on a computer before uploading them, unless you can convince Vimeo to change their limits.

Browser display is too large

Please help: For some unknown reason, my Macbook browser display has grown to beyond the edges of my screen.
Thank you

Click the green "+" button at top left - this should make the frame fit within the screen. Then grab frame from the top until you can access the diagonal lines at the bottom right of the browser frame and resize to a smaller size.

Display/desktop too large

I cannot seem to get my computer screen back to a normal size. My desktop photo is so large that all the icons go missing and I have tried system preferences. Someone mentioned Hot corners and zoom. Anyone have this problem?

THANK YOU so much. My Apple Protection Plan expired a few months ago, so I cannot believe that you just cleared it up. Very much appreciated!

After a Adobe Pro XI update was downloaded (Windows) when creating a Comments Summary the text is now too large and unuaeable, how do I change the style and font size in a comments summary?

Example of the Comment Summary

Sabian- We tried the steps you posted on 3 computers and it did not resolve the problem for us.
All-
We have been manually reducing the font size in the comment summary (right-click > Edit Text). This makes the text readable, but it doesn't remove all the extra space or fix the flow. This is not ideal.
Has anyone entered a bug report on this problem? I entered a bug report on another problem about 2 years ago and the problem was never fixed in the product...
Thanks-
Stephanie

Phone display too large to function

My display is too large to fit my screen and makes it almost unusable to navigate. I cannot find a setting to fix this. Anyone run across this?

Double tap with 3 fingers to un-zoom.
To prevent this from happening again:
Settings > General > Accessibility > Zoom > OFF

Picture too large

After the new programming interface loaded, my screen is now too large. Specifically, the picture is too wide. Any ideas? It was perfect and I didn't change anything.

Press the # button on your remote until the picture is the right size.

When firefox is loaded the display is too big for the screen & blocks out controls

When I load Firefox Home, the display is too large to fit into the screen making it impossible to see the controls (Toolbar and log-out cross etc) This has only just happened, everything was working perfectly until about an hour ago

Open the system menu via Alt+Space and see if you can resize that window.
If that works then close Firefox (File > Exit/Quit) to save that setting.
See also:
* http://kb.mozillazine.org/Resizing_oversize_window
If the above didn't help then see:
* http://kb.mozillazine.org/Corrupt_localstore.rdf

Cid: images displayed too large

I get a daily ModusMail spam quarantine digest. It has the following in its CSS:
.qtrMessageImageCell
width: 25px;
The HTML has entries like:
<TD class="qtrMessageImageCell"><img src="cid:Phishing.gif@Category"></TD>
The first time a cid: image is displayed it has the correct size. All later instances of that same image are about 10 times too large.
Content-ID: Phishing.gif@Category
Content-Type: image/gif
Content-Transfer-Encoding: base64
Content-Disposition: attachment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=
Message was edited by: John Dalbec

Our company really enjoys using the Muse product a lot and we are building our business online around it. However, this image loading is a big problem for us. With high resolution displays like Macbook Retina and Google Pixel it's important websites be crisp and high resolution. While these machines are only a small portion of users online now it's a growing group and they are very affluent, influential, tech savvy and generally ahead of the curve.
Muse is uniquely positioned to help us cater to these high end clients and also serve smartphone users and lower bandwidth visitors, as mobile is a very important channel as well. Muse should have an option that allows me to include the highest quality images I can find and then serve lower resolution images to visitors on phones or mobile connections, and higher resolution images to high speed connection users on advanced displays.
We build our whole website presuming Muse would optimize for this and our bounce rate is very high and load times are very slow right now. Although we love the product this isn't just a bother, it's a mission critical problem that may cause us to abandon the product.
To be fair we inadvertently made this worse by going with a very visual "infographic" style site and we have high resolution screens so we're making it look sharp for us.
Now we're looking for ways to fix this quickly now without resizing dozens of images and also wondering how Muse handles this kind of rendering now and how that will change going forward?
Thanks!
Dave
www.sendsmart.com
Ps. Would also be good if images loaded from top to bottom more and/or started out with lower resolution and graduated to higher resolution as I've seen on some sites (this may be browser)

Dual Monitor Issue: 2nd Display too large...can't adjust...web pages provide no scroll bars

I have two (2) HP S2031 LCD flat screen monitors. They functioned perfectly with my old 32-bit machine (now gone). I have just purchased a new 64-bit Windows 7 machine. There are no error messages, but if I open a web page on the right (2nd) monitor, it does not display correctly. It's as if it is a little too large. I've tried adjusting the image using the Nividia software and using the monitor adjustments without improvement. It is difficult getting out of that window because no scroll bars (vertical or horizontal) present themselves. I am connecting through an iogear MiniView KVM switch to DVi-D sockets (with the four pins).
Is it a 64-bit driver issue? I think not, because display #1 looks fine. Could it be an iogear KVM firmware issue?
I dug out the HP driver disks that came with my monitors and installed them. After I did that, I realized these were a 32-bit installation. Now the monitor resolution won't go back to the higher, recommended level. I don't see the software installation on the "add/remove programs" listing. I'd like to change that.
BUT THE REAL ISSUE is that I need BOTH monitors to be able to display proper aspect independently. Remember, I've been through both the Nividia adjustments menu and the built-in monitor adjustments menu and found nothing that worked so far.
Please help if you can. This is for my trading business and I need it desperately.

When requesting assistance, please provide the brand and model name and/or product number of the computer in question. Without this information, it may be difficult or impossible to resolve your issue.
Have you swapped the two monitors to see if the problem follows the monitor or remains at the same location??? Try that first... if the problem follows the monitor, perform a hard reset by unpluging the monitor from power then holding the power button for 30 seconds. If the problem stays in the same location, you know both monitors are good and I would suspect the KVM isn't passing the "EDID" data to the computer. Removing the KVM should will tell you if this is the case.
Please post back with your troubleshooting results.
Please send KUDOs
Frank
{------------ Please click the "White Kudos" Thumbs Up to say THANKS for helping.
Please click the "Accept As Solution" on my post, if my assistance has solved your issue. ------------V
This is a user supported forum. I am a volunteer and I don't work for HP.
HP 15t-j100 (on loan from HP)
HP 13 Split x2 (on loan from HP)
HP Slate8 Pro (on loan from HP)
HP a1632x - Windows 7, 4GB RAM, AMD Radeon HD 6450
HP p6130y - Windows 7, 8GB RAM, AMD Radeon HD 6450
HP p6320y - Windows 7, 8GB RAM, NVIDIA GT 240
HP p7-1026 - Windows 7, 6GB RAM, AMD Radeon HD 6450
HP p6787c - Windows 7, 8GB RAM, NVIDIA GT 240

HT1338 How do I change my display settings to normal size.....everything is far too large ? Icons, font size, etc....

Everything displayed is farr too large....I have somehow changed my settings.....e-mails, icons, etc....everything is aplified in size....any ideas ?

Try System Preferences > Displays
Try a different resolution.

HT1338 Since having my Macbook Pro attached to a large display screen, everything is too large for the screen. Is there a cure please?

Today I had my Mac linked to a projector screen, and since disconnection evrything from the desk top onwards has been too large for the screen. Before that evrything was perfect. I have tried zoom buttons etc, but nothing seems to work. Any help gratefully rceived.

So it's not the Zoom feature? Open System Preferences Universal Access pane Seeing tab. Make sure Zoom is turned OFF.
If it's not that, then you may have the resolution set so that it is not optimal for the built-in display. Open System Preferences Displays pane Display tab. The optimal resolution is usually the one at the top of the list of choices.

Display now too large

Similar Messages

Maybe you are looking for