Display"Number of Displayed XML Messages" in SXMB_MONI transaction screen

I used to have this information "Number of Displayed XML Messages XX" in the SXMB_MONI transaction screen just above the ALV toolbar. Somehow, it's not there anymore. How can I put back this message on this screen?
Thanks.
Joey

What version you are using?
Please compare your user ID and colleague's User ID.
Try log in with colleague's User ID from your laptop.
In my case, this issue had come when we upgraded PI support pack to 18. This issue was solved after upgrading SAP GUI Log in pad version to 710.
-Gouri

Similar Messages

Regarding XML Messages in SXMB_MONI

Hi,
I have an issue which goes like this: PO's are not getting submitted to SNC.
I have done the following things to find out the cause.
1) I tried to find out the creation and change times of PO in table CDHDR (t.code SE16).
2) I used t.code SXMB_MONI and searched for XML messages w.r.t the date and time I found out in step1.
3) However, the problem is: no XML message is present with the creation and change time of PO's that I found in step 1. Could you help me where I have done the mistake. Also, Please tell how to find creation and change times of PO.
Thank You.

Dear,
May this link solved your problem, Kindly check the below links.
http://www.****************/Tips/XI/SXMB_MONI/Configure.htm
http://wiki.sdn.sap.com/wiki/display/Snippets/PIMonitoringFunctionality-FetchingDatafromSXMB_MONIStandardTables-PartI
Thanks & regards
varun

File is picked up but never show the XML message in SXMB_MONI

All,
I am working on the file to SAP integration scenario issue. High level interface design is,
File Adapter picks the file from XI application server and send the data to SAP Application system(in this case ECC) to post data as per the business requirement. The scenario is working perfect since long time and we don't have any issues as yesterday.
This morning, I noticed File adapter picks the file and moved the file to archive folder (based on settings in communication channel) but XML message never shown in SXMB_MONI. I had a look into the RWB to check status of the communication channel. every thing looks fine from communication channel monitoring.
Did any one come across this scenario? What else to be checked to move forward on this issue?
Thank you..
Anil

Hi Kumar,
The error message indicates the URL the adapter engine is using to send the data to the integration engine is wrong. The last part of it has somehow become truncated: "type=ent" should read "type=entry".
In the SLD lookup the XI technical system, under the integration tab check the setting for the "Pipeline URL" field, you should see something like: http://HOST:PORT/sap/xi/engine?type=entry if not, you can correct it.
Then go to the XI ABAP client using SAPGUI and in transaction: SXMB_ADM, option "Integration Engine Configuration", check that Corresponding Integ. Server has the same URL, if it has something of the sort of: "dest://...." check in transaction SM59 for that RFC destination name, it should have the correct URL. Also in the specific configuration (using the same transaction), check the RUNTIME->IS_URL parameter value.
Hope that helps.
-Sam.

No XML-Message in SXMB_MONI

Hi folks,
I have the following scenario:
RFC-XI-Webservice.
All works fine. I get the request to the Webservice and the response back to the calling abap prog. with the RFC. But one problem: I can't see any XML-message over the XI Monitor SXMB_MONI.
What happens? Is it anything with persist the message...
Thx for response.
Regards Johann

Micheal,
LOGGING_SYNC 1 is already set.
My issue is when run the report RPCIPE00 from HCM for executing the BAPI
using through TCP/IP RFC Dest i got the above mentioned error. For SYNC RFC
We have to add the BAPIs at BD97 isn't? When I add the BAPI at BD97 and assign the TCP/IP RFC Dest name a special Method. I got the above mention error its not creating the documents at HCM side.
Could you please guide me.
SV

Delete XML Message permanently (SXMB_MONI) = empty

Hi all,
Could you help me how to delete all the xml message so my table become empty, no more message
in SXMB_MONI. because i already try execute RSXMB_DELETE_MESSAGES, but the xml message still there.
Thank you
Fernand

Fernand ,
Not all messages were deleted cause the retention period might not have expired for those messages.
See the following SAP Note 872388 for Deletion of XML Messages.
Regards,
Sumit

"Receipt Number Already Assigned" error message in F-28 screen

Hi
When posting Incoming Payment using T Code: F-28, we got "Receipt Number Already Assigned" error message. Can any one hanve any idea why system has shown this error message?
Thanks & Regards,
Chandra

do you enter a payment advice number or document number?
Seems like you want to enter a number that has been already entered before, so system does not accept to have same entry.
Check your entry, if corect check old one. Or add something to the number to make it unique.
Regards
Hein

Restrcing XML messages in SXMB_MONI based on authorizations

Hi All,
How to restrict the visibility or display acess of Payload in sxmb_moni based on authorizations as we do restrict the visibility of design objects in ESR (Profile Based Authorization In ESR Using PI 7.1).
Please let us know your inputs on this. We have already searched but couldn't find any useful information.
Thanks,
Vinod

Hi Vinod,
You can ensure that the following roles are not assigned to unauthorized userid's in SAP PI:
SAP_XI_MONITOR
SAP_XI_MONITOR_ENHANCED
SAP_XI_ADMINISTRATOR
SAP_XI_SUPPORT
To further explore the roles check the Role Maintenance transaction (PFCG) and the following link:
http://help.sap.com/saphelp_nw04/helpdata/en/58/d22940cbf2195de10000000a1550b0/content.htm
/people/michal.krawczyk2/blog/2006/01/02/xi-sxmbmoni--controlling-access-to-message-display

ABAP Table for DynamicConfiguration details of XML message in SXMB_MONI

Dear All
I have a requirement where I have to read the value from DCJMSCorreleationID property of message which is recorded in SXMB_MONI based on the SAP PI message ID.
I have 2 interfaces as below
Interface one (INT1) : JMS-PI-ECC --->Inbound interface to ECC when message is received on PI it will have DCJMSCorreleationID populated with some ID as shown below
Go to SXMB_MONI -->Inbound Message ---> SOAP Header --->DynamicConfiguration
<?xml version="1.0" encoding="UTF-8" standalone="yes" ?>
<SAP:DynamicConfiguration SOAP:mustUnderstand="1" xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/">
<SAP:Record namespace="http://sap.com/xi/XI/System/JMS" name="DCJMSCorreleationID">
a26c4276-9d5e-11e3-ba87-000004238292
</SAP:Record>
<SAP:Record namespace="http://sap.com/xi/XI/Message/30/general" name="senderAgreementGUID">dd3fb7c6b983314293e14ba59df1ad45</SAP:Record></SAP:DynamicConfiguration>
Interface Two (INT2):-ECC-PI-JMS----> Outbound from ECC where I am passing a SAP PI Message ID for INT1 in one of the field
Can I read this DCJMSCorreleationID for INT1 when INT2 is executed and have message ID for INT1 ?
Where are these SOAP hearder porperties like DCJMSCorreleationID are stored on ABAP table?

Thanks Jörg for your reply
I have a back up plan for ZTable approach but the only concern there is RFC calls for read and write
we have implemented a FM which gives the original payload using a std SAP functional modules FM SXMB_GET_XI_MESSAGE_INT and ECATT_CONV_XSTRING_TO_STRING
But I am looking for the SOAP Header information for DCJMSCorreleationID
So if there is anything which will help to read this DCJMSCorreleationID property easily form existing message SOAP header is really helpful

Reading the XML message from Xi stored in XML format from a abap program.

Hi Gurus,
My requirement here is to read the data that will be coming from Xi from my custom abap program and updating 2 data base tables. The method is after the data mapping is done a class is generated in abap proxy in which a method is available. Inside the method i am writing the code for getting the Xi data stored as a payload message which can be seen in the transaction SXMB_MONI. My code is given below.
***begin code***
method ZII_PAYROLL_HEADER_IN~PAYROLL_HEADER_IN.
**** INSERT IMPLEMENTATION HERE **** ***
data: ln type i.
DATA: i_items TYPE TABLE OF ZPAYLOAD_WRAPPER_EMPLOYEE_REC3.
*DATA: wa_items type ZPAYLOAD_WRAPPER_EMPLOYEE_TAB5.
data: wa_items type ZPAYLOAD_WRAPPER_EMPLOYEE_REC3.
DATA:PERNR TYPE STRING.
*data: it_ZPAYLOAD_WRAPPER16 TYPE ZPAYLOAD_WRAPPER16.
I_ITEMS[] = INPUT-PAYLOAD_WRAPPER-BODY-XMLDOC-PAYROLL_PERIOD_OVERVIEW-EMPLOYEE_RECORD[].
*I_ITEMS = INPUT-payloadWrapper-Body-XMLDOC-PayrollPeriodOverview-EmployeeRecord.
describe table i_items[] lines ln.
endmethod.
**End code***
As per the logic the data stored in the XML message should be avaialble in INPUT-payloadWrapper-Body-XMLDOC-PayrollPeriodOverview-EmployeeRecord which i am assigning to a local internal table in the class.
But in my case there is no data coming in
INPUT-payloadWrapper-Body-XMLDOC-PayrollPeriodOverview-EmployeeRecord.
But i can see the data transffered from XI in the transaction SXMB_MONI->XML message->inbound message->payload.
Is there any way to read the data stored in the XML message in the transaction SXMB_MONI.
Also why the data is not coming in
INPUT-payloadWrapper-Body-XMLDOC-PayrollPeriodOverview-EmployeeRecord inside the class.
If there is any solution for this problem please post it.

You can use function module SXMB_GET_MESSAGE_PAYLOAD.
Code snippet:
DATA: ls_mast      TYPE sxmspmast,
      ls_msgkey    TYPE sxmsmkey,
      lv_bin_xml   TYPE xstring,
      lv_str_xml   TYPE string.
* select sxmspmast into ls_mast
ls_msgkey-msgid = ls_mast-msgguid.
ls_msgkey-pid    = 'RECEIVER'.
CALL FUNCTION 'SXMB_GET_MESSAGE_PAYLOAD'
    EXPORTING
      im_msgkey      = ls_msgkey
      im_archive     = ' '
      im_version     = ls_mast-vers
    IMPORTING
      ex_msg_bytes   = lv_bin_xml
    EXCEPTIONS
      not_authorized = 1
      no_message     = 2
      internal_error = 3
      no_payload     = 4
      OTHERS         = 5.
IF sy-subrc EQ 0.
      lv_str_xml = cl_soap_moni_helper=>convert_xstring_to_string( xstring_in = lv_bin_xml ).
ENDIF.

No xml message for PI

Hi experts,
In my scenarios, I read data from files in folder A, archive these files to folder B,and outbound to http service(BID). I actived all in my scenarios in ID/IR.
Now I put one file to folder A, and found lots of files in folder B. (add 1 file every second), but I do nothing.
Now I had a try in test configuration. I found a red square in "Receiver Determination"
Runtime error
Error while refreshing the XI runtime cache
It's strange I have no message for my scenarios at any time, even I don't find my service/interface name/interface namespace in "Monitor for Processed xml messages" (tcode:sxmb_moni). Of cause, I find nothing in RWB.
Please help me,and thanks.

Hi,
Check this links
http://www.sdn.sap.com/irj/scn/index?rid=/library/uuid/c0332b2a-eb97-2910-b6ba-dbe52a01be34&overridelayout=true
Error while refreshing the XI runtime cache
Error while refreshing the XI runtime cache
Regards
Ramesh

No Messages en SXMB_MONI in R/3 WebAS 6.20 with Add on

Hello everybody,
My problem is as follows, I have a scenario with R/3 ABAP Proxy-> XI R/3 ABAP Proxy, the problem is that I can't see any XML messages in SXMB_MONI in the R/3 Receiver, not synchrnous, not asynchronous, not erroneous, not succesfull messages I can't see any type or kind of messages, the R/3 is a WebAS 6.20 with add on for integration engine so ABAP proxies could work, I've been reading some threads but I think are more for SXMB_MONI in XI than in an R/3 so tose threads talk about some parameters sucha as LOGGING and LOGGING_SYNC and TRACE_LEVEL category RUNTIME, I've read the blog:
/people/michal.krawczyk2/blog/2005/05/10/xi-i-cannot-see-some-of-my-messages-in-the-sxmbmoni
from Michal but I can't fin these parameters in the R/3 they don't exist does anyone have any other suggestions? thanks in advance.
Regards,
Julio Cesar Ruiz

hi,
u have to do settings in sxmb_adm.
follow the links;
/people/michal.krawczyk2/blog/2005/05/10/xi-i-cannot-see-some-of-my-messages-in-the-sxmbmoni
other links u can follow:
http://help.sap.com/saphelp_nw2004s/helpdata/en/3c/499240ed38ce62e10000000a155106/frameset.htm
http://help.sap.com/saphelp_nw2004s/helpdata/en/7a/00143f011f4b2ee10000000a114084/frameset.htm
http://help.sap.com/saphelp_nw2004s/helpdata/en/41/b714f55ffc11d5b3ea0050da403d6a/frameset.htm
http://help.sap.com/saphelp_nw2004s/helpdata/en/e3/dd0f41026df223e10000000a155106/frameset.htm
http://help.sap.com/saphelp_nw2004s/helpdata/en/cd/20bc3ff6beeb0ce10000000a114084/frameset.htm
http://help.sap.com/saphelp_nw2004s/helpdata/en/81/471241043ff06fe10000000a1550b0/frameset.htm
reward points if helpful
regards,
ujjwal kumar

Triggering and view XML messages in SAP AMI

We have configured the AMI. Also setup the AMI enabled devices.
We have created Meter Reading Orders for the periodic meter reading as bulk .
But the creation of MROs does not trigger creation of XML messages.
We found the Enterprise Service responsible for meter reading order Request Smart Meter Meter Reading Document Creation as Bulk SmartMeterMeterReadingDocumentERPBulkCreateRequest_Out
But the XML messages are not getting generated on MRO creation. Also no XML message generated on AMI enabled device creation. Would like to know where we can view the generated XML and also trouble shoot.
Thanks in advance for the information
Vijay

Hi,
Thanks a lot for the informaiton , I could go into SXMB_MONI with date and time stamp to view the XML message, still i am not able to view it.
Is there any thing specific needs to be configured to have the XML message in SXMB_MONI
The process we are following is we are creating periodic meter reads and using the transaction ELMU Customized to our needs to trigger the SmartMeterMeterReadingDocumentERPBulkCreateRequest_Out . Are we following the right approach.
Can you provide the check points.
thanks,
Vijay
Edited by: vijay gunti on May 26, 2010 8:39 AM
Edited by: vijay gunti on May 26, 2010 8:46 AM
Edited by: vijay gunti on May 26, 2010 8:49 AM

Configuring Standard ESR ESOA XML message Reciever and Sender for PO Creati

We are trying to send to our SNC system the standard XML Message PurchaseOrderERPReplenishmentOrderCollaborationNotification_Out when we create a purchase Order. We are able to generate and see the XML message in SXMB_MONI but the XML status Message is Green flag not Checker.. The Queue status is stop.. (The Queue is registered). But there is no receiver in the standard XML message... Where do we populate this... In the Integration Engine? What is the standard Scenario to use?

Hi,
>>>But there is no receiver in the standard XML message... Where do we populate this... In the Integration Engine? What is the standard Scenario to use?
did you connect SCN with PI/XI ? for proxy communication ?
if not this is a start
then you need to configure PI/XI to push the message wherever you want
Regards,
Michal Krawczyk

Display number of unread and read messages in mailboxes?

Hiya,
Can I get Mail to list the total messages in a mailbox in the column on the left? I have a smart-mailbox for "flagged" items and I'd like to be able to see how many things are in it, while I'm sorting things in my inbox.
There's an unanswered post here, "Display number of messages in mailboxes?" that's been archived. Is there an answer to this?
I suppose I could install Dockstar or Docktopus and try to customise Mail's dock icon. But I don't don't know if they can do "non-read" messages, and I keep the dock hidden normally. Can Mail do it easily for me, with your help?

The Dockstar folks were nice, but said they can't do this yet. Anybody else?

ICloud Mail on my MacBook Pro incorrectly displays number of unread messages

The iCloud account in Mail displays 1 unread message when all are read. I am unable to "mark all messages as read" to remove the 1 unread message icon. When I send multiple test emails to the iCloud account, it still only displays 1 unread message when there are more. The iCloud account on my iOS devices correctly displays the number of unread email messages.

This is an addition to my earlier statement...
This anomoly with Mail displaying 1 unread message regardless of the fact all messages are read is only occurring in Mail. I set up iCloud email in Outlook for Mac 2011 and it correctly displays the number of unread messages.

Display"Number of Displayed XML Messages" in SXMB_MONI transaction screen

Similar Messages

Maybe you are looking for