Display of Browser and Fullscreen

Hi,
I'm on a MacBook with an external monitor connected to it. I want to display the Browser in the MacBook and the fullscreen picture at the external monitor. The MacBook is the first display and contains the dock bar.
How should I configure the settings in Aperture? I'm trying this since one hours.
Many thanks in advance.
Tobias

Tobias,
I got the configuration you want once after many tries and could never get it to work again. I tried changing menu locations, all main and secondary settings yadda, yadda, yadda.
I have done the opposite, my iMac as main in full screen and have the Browser on a secondary screen. To do this I have menus on Main screen, Main Screen set to Show One and Secondary Screen set to Desktop. I then resized the window in split screen mode (Browser and Viewer, no Inspector) and dragged it onto the Secondary screen, select a thumbnail and go into full screen using the HUD. Clicking the lock at top right of the HUD locks it to the right so it doesn't overlap the image.
I hope this is helpful.
Cheers,
Terry

Similar Messages

Pdfs display fine in every other browser and on pc, just not in ie

Can't view PDF on the web
have done EVERY single thing on this page to no avail, pdfs display fine in every other browser and on pc, just not in ie
I have acrobat pro 11 and windows 8.1
have tried every help article on the internet I can find and still nothing...am probably going to have to get used to another browser, this issue has taken hours and hours and still cannot get it to work

Install the latest update of Reader or Acrobat (done, no effect)
Adobe releases free security updates quarterly. It is important to update your version of Reader or Acrobat to the latest release. The updates often include fixes to common problems. Download the latest free update:
Note: Microsoft Windows 7 requires Adobe Reader 9.2 or later.
1.      Open Reader or Acrobat.
2.      Choose Help > Check for Updates. If a new update is available, it installs automatically.
3.      Once installed, restart your computer.
To the top<http://helpx.adobe.com/acrobat/kb/cant-view-pdf-web.html>
Refresh or reload the page (done, no effect)
Often, just refreshing the page allows the PDF to load fully.
Hold down the Shift key and press the    Refresh or    Reload button in the browser.
Try to view a different PDF (done, no effect)
Try viewing a different PDF. For example, see if this sample form<http://help.adobe.com/en_US/Acrobat/9.0/Samples/flatform.pdf> displays in your browser.(DOES NOT OPEN) If Acrobat or Reader can open the sample form, then the other PDF could be damaged or the web server could be having problems. If possible, contact the individual or company who manages the website.
1.      Try to view a PDF on your hard drive . (ALL PDFS OPEN ON HARD DRIVE)
To the top<http://helpx.adobe.com/acrobat/kb/cant-view-pdf-web.html>
Problem with the browser or its settings?
Use a different web browser (Pdf'S open in alternate browsers)
Certain conditions on your computer, such as security settings or browser cookies, can prevent you from viewing a PDF. Often, the fastest solution is to try to open the page using a different browser. Try any of the following browsers that you have not already tried:
Mozilla Firefox<http://www.mozilla.com/firefox/>
Microsoft Internet Explorer<http://www.microsoft.com/windows/internet-explorer/default.aspx>
Apple Safari<http://www.apple.com/safari/download>
For a list of compatible browsers for Reader and Acrobat X, see this list of Compatible web browsers<http://helpx.adobe.com/acrobat/kb/compatible-web-browsers-pdfmaker-applications.html>.
Switch to Compatibility View (Internet Explorer) (done, no effect)
Some websites display better in the Compatibility View of Internet Explorer. The Compatibility View displays a page as if it was an earlier version of the browser. For instructions on how to switch to this view, see one of these documents on the Microsoft website:
Internet Explorer 9: How to use Compatibility View in Internet Explorer 9<http://windows.microsoft.com/en-us/windows7/How-to-use-Compatibility-View-in-Internet-Expl orer-9>
Internet Explorer 8: Why are some web pages blank or incorrectly displayed in Internet Explorer<http://windows.microsoft.com/en-US/windows7/webpages-look-incorrect-in-Internet-Explorer>.
Restart your computer and try opening the PDF again (done, no effect)
Restart your computer, then open the web page again. Restarting clears the computer memory and memory cache. It is surprising how often simply restarting your computer resolves a display issue.
Delete temporary Internet files (Internet Explorer, Firefox, and Chrome) (done, no effect)
Clear the browser cache (sometimes called 'temporary Internet files') to ensure that you are viewing a fresh version of the page. When you open a web page, the browser saves a temporary copy so that it opens more quickly next time. You want to force the browser to load the entire page directly from the server, rather than displaying a stored copy.
Reset the Display PDF In Browser preference (done, no effect)
1.      In Reader or Acrobat, right-click the document window, and select Page Display Preferences.
2.      From the list at left, select Internet.
3.      Deselect Display PDF In Browser, and then click OK.
4.      Choose Edit > Preferences > Internet, select Display PDF In Browser, and then click OK.
5.      Try to open the PDF again from the website.
View PDF in 32-bit version of Internet Explorer or Safari (done, no effect)
Acrobat and Reader are 32-bit applications on Windows. If you try to open a PDF in a 64-bit version of Internet Explorer, the PDF opens in stand-alone Acrobat or Reader, not in Internet Explorer.
Remove DreamFactory (Firefox only) (done, no effect)
If you receive the error "Cannot use Adobe Reader to view PDFs in your web browser," do the following:
1.      Choose Start > Run, type appwiz.cpl in the Open text box, and then click OK to open the Add Or Remove Programs dialog box.
2.      Select Change Or Remove Programs in the Add Or Remove Programs dialog box, select DreamFactory Runtime for Netscape, Mozilla and Firefox, and click Change/Remove.
3.      Click OK in the Remove Programs From Your Computer dialog box.
To the top<http://helpx.adobe.com/acrobat/kb/cant-view-pdf-web.html>
Problem with Reader or Acrobat?
Remove unmatched or multiple versions of Reader or Acrobat (already did this including running a cleaner from the Adobe site) (done, no effect)
Repair Reader or Acrobat (done, no effect)
Reader or Acrobat could be damaged. Repairing the installation is a quick troubleshooting safeguard.
Repair from within Reader or Acrobat (done, no effect)
(Reader) Choose Help > Repair Adobe Reader Installation.
(Acrobat) Choose Help > Repair Acrobat Installation.
Repair using Control Panel (Windows) (done, no effect)
You can also repair your Acrobat or Reader installation using the Windows Control Panel.
Enable the Adobe PDF browser add-on (Internet Explorer) (done, no effect)
Make sure that the Adobe PDF browser add-on, AdobePDF.dll, is enabled.
Run Acrobat or Reader in a new local administrator account (done, no effect)
Optimize large PDF files (not the problem)
If the PDF file is 4 MB or larger, ask the provider to optimize the PDF file. For information about optimizing PDF files, see
Check the registry path for Acrobat or Reader (Windows) (done, no effect)
Repair the HKCR\AcroExch.Document registry key (Windows) (done, no effect)

After watching a youtube video in fullscreen on my Macbook pro, the display goes black and my laptop get stuck...

After watching a youtube video in fullscreen on my Macbook pro, the display goes black and my laptop get stuck...
And I need to reboot everything from the power button...
It's just the second time it happens. What it depends from?

Hello DarlinDodson,
I'd recommend taking a look through the following article that can help get your MacBook working with your TV again.
Apple computers: Troubleshooting issues with video on internal or external displays
http://support.apple.com/kb/HT1573
Cheers,
Allen

Web-browser only display Summary Status and no menu for configing

Guys,
I have 4 Cisco Aironet 1140. I open a web browser IE 8 and type their address "http://<ip address>". Then I enter my username and password in the browser and successfully login to the access point.
But, There is something strange, why I only see Summary status of my access point after the login process success??? I can't config anything...
I add a new username and use highest privilage, but the result still the same. Same unusual web display, only displaying summary status of the access point, I can't config ssid, vlan, etc.
Here's my configuration:
username Zicco privilege 15 password 7 123A551A02055F106B
username Bl4st privilege 15 secret 5 $1$UJom$UoNBR07HmSGXdoxTUR1W40
ip http server
ip http authentication local
no ip http secure-server
Is there any configuration command that must be added? Please help me.
Thank you

Hi George, today we solved the problem. With adding this command: "config(terminal)#ip http authentication local" all of 5 access points now able to managed via web browser.
Sometimes, we can use access point's web browser without adding this command. But in my cases, only using command of"ip http server" isn't enough. You must add "ip http authentication local" command to your configuration. I dont know why.
And we must have at least one: username <username> privil 15 pass <password> that is full privileged user to use as username and password logon in your access point browser. Otherwise we can't logon to our access point.
Thank you George, I appreciate your kindness. Regards

No 'Viewer' view in fullscreen only Browser and Split

I'm not sure if I am doing something stupid here. I installed the 3.1 update and launched Aperture and I have lost the full screen 'Viewer' view. Pressing V toggles between Browser and Split view. All three views are selectable in the non full screen view.
I'm following the Aperture 3 Pro training series book, so it's possible that I have changed something but I'm pretty sure it was fine before the 3.1 update.
Any ideas?
Thanks,
Gareth.

Is the 'always show filmstrip' slider (on the right edge of the filmstrip between the last image and the right margin) in the down or 'on' position?

Adobe Muse: "Preview page in browser" and "preview site in browser" functions have stopped working.

Working one day then not the next. Firefox just spins. The preview button works, as does the publish function.
2.7Ghz i7 Macbook Pro with Retina Display
Muse 2014.0.1
Something else to add: When Firefox finally timed out it displayed the full url. Copying and pasting that into Safari and everything works. So it seems in someway this is a Firefox issue or a Muse -Firefox connection issue.
So the new question is: how can I change the browser Muse chooses to use when I select these two functions?

HI,
Adobe Muse will use OS default browser for preview the page/site in browser. So you can change the default browser and preview the site again.
Also, try to troubleshoot Firefox, using their official documentation
Firefox can't load websites but other browsers can | Firefox Help
Do let me know if you have any question.

Browse and Edit Form - JSP

Hi all,
Using BC4J and BC4J JSP to generate Browse and Edit Form, e.g. EmpView_browse.jsp, and EmpView_Edit.jsp, I want to show only a few attributes in browse, and all fields in edit. If I change the "display" in control hint to hide, the attribute will not be displayed in both pages.
Please help.
Regards,
Terry Luk

Hi,
try something like this :
<jbo:ViewObject id="voBrowse" name='<%=dsParam%>' />
<jbo:AttributeIterate id="df" datasource="<%=dsParam%>">
<% if (df.getName() == "InvoiceNr") {
<th class="clsTableHeader" title="<jbo:ShowHint hintname='TOOLTIP'></jbo:ShowHint>" ><jbo:ShowHint hintname="LABEL"></jbo:ShowHint></th>
<% }%>
</jbo:AttributeIterate>
<jbo:RowsetIterate datasource="<%=dsParam%>" changecurrentrow="false" userange="true">
<tr>
<jbo:AttributeIterate id="dfv" datasource="<%=dsParam%>">
<% if (dfv.getName() == "InvoiceNr") {
<td title="<jbo:ShowHint hintname='TOOLTIP'></jbo:ShowHint>" valign="top" > <jbo:RenderValue datasource="<%=dsParam%>"/> </td>
<% } %>
</jbo:AttributeIterate>
</tr>
</jbo:RowsetIterate>

Problem with Wine, NVidia and fullscreen games

Hi,
I'm writing about a problem i recently noticed with wine, nvidia gpu and fullscreen 2d games.Basically the problem is as follows - i am running arch with the latest kernel and nvidia drivers on Thinkpad T61 with NVidia Quadro NVS 140M. I have a problem with old 2d games like Red Alert 2, Baldur's Gate, Icewind Dale, Diablo 2, Heroes 3. All of these games do not support the native 1440x900 resolution of my screen and all of them work fine in window mode but crash if fullscreen is selected. I managed to get some of them working by making them work at higher resolutions. For example although Red Alert 2 does not support 1440x900, it can be easily made to work at that resolution and after i applied the necessary settings it worked. The same was with Heroes 3 - by default it does not support 1440x900 and it used to work only i window mode but there is a HD mod which allows it to run in higher resolutions and after i applied it it worked perfectly in fullscreen. I haven't thested Baldur's Gate and Icewind Dale but i think it will work there too.
The problem is that i cannot use this approach to all games - for example i must run Diablo 2 and Starcraft in their original resolutions. I read somewhere that the problem is that wine can only change between the resolutions described in the xorg.conf file and if doesn't find the necessary resolution the game will crash or will only take the portion of the screen that is its resolution - for example when i play Starcraft rather than stretching it to the whole screen it simply takes 640x480 pixels of my screen and the game is displayed in the top left corner of the screen leaving everything else black.
I didn't have this problem before - it is something new though i'm not sure since when do i have the problem because i rarely play games. As for the idea that the problem may be related to the resolutions defined in the Xorg.conf file, my xorg.conf is automatically generated by the nvidia installer and there are no resolutions defined there.

brebs wrote:
Try nvidia 304.48
I remember that issue, with the 302 series.
I have Nvidia 304.48 installed and the problem still exists (it also happens with Catalyst). This didn't occur with 295.59 using the same version of Wine.
https://bbs.archlinux.org/viewtopic.php?id=55145
https://bbs.archlinux.org/viewtopic.php?id=147073

HT5219 When I connect my MacBook Pro to a TV (Thunderbolt to HDMI) no display is recognized and I am unable to mirror. I have a 2.9 GHz Intel Core i7 with 8GB 1600 MHz DDR3 running OSX v 10.8.3.

When I connect my MacBook Pro to a TV (Thunderbolt to HDMI) no display is recognized and I am unable to mirror. I have a 2.9 GHz Intel Core i7 with 8GB 1600 MHz DDR3 running OSX v 10.8.3.

You are being scammed. Please ignore and close. Do not click any links or call any phone numbers!
Remove Browser Pop-up Problems
     AdwareMedic
     Adblock Plus 1.8.9
     remove adware that displays pop-up ads and graphics on your Mac

New Payment display Closed invoices and amount error ?

Hi experts,
Help, I have a serious stupidity after data migration, I changed the invoices by SQL and at a new payment document it display the invoices already closed and their amounts not corresponding with the real invoices amounts or or retrieves the amount of other invoices.
After a error with an Invoice, I removed this (DocEntry 1removed) in SQL to recreate it by SB1 With an other DocEntry.
How to Resolve this problem with SQL
Thanks,

yes I reformatted the card, and after it was finished, I ran Maps. When it told me I need to download the maps (and gave me 3 options), I exited and connected the phone to my computer, browsed and deleted the cities folder and the qf file. Waited a little bit and reran Maps. This time I used the WiFi connection from the phone to download.
I gave me an error when I tried to download the entire USA maps, so I selected Texas and Pennsylvania state maps. Those downloaded ok. Next when I tried to download New Jersey, it started a little bit and the disk error message came up again so I hit stop. Ran Files and saw the memory card is grayed-out (did not indicate and free space), I know the same problem is happening again.

No preview displayed in Aperture and Preview after Lion "upgrade"

Hi everyone,
something (well, maybe many things) has been blown by Lion...I'm only just trying to figure out what exactly is.
Generally the system performs well but I have a big issue with previews within Aperture 3 and in Preview/Quicklook itself.
I'm testing Lion onto a late 2009 unibody macbookpro 13", 2.0 ghz, 8gb Ram; Aperture library is managed, around 100gb, all files are from Canon 30D and 350D, plus some jpegs and videos from a Powershot A620 (I didn't test the videos imported in Aperture yet, in SnowLeopard everything was fine).
In Aperture 3 (I have upgraded to 3.1.3 before installing Lion) my Canon 30D files are displayed correctly both in browser and viewer...Canon 350D files (raw images) aren't...well, the small thumbnail in the browser view is looking fine but when I double click to display the large image..it suddenly disappear! gray or black background, no image at all...back to browser view and the small thumbnail correctly display the image.
So i tried to regenerate the preview...nothing, same behaviour...if I press P for quick preview nothing is displayed, I get nothing even if I press M for master image.
Ok, I said...let's try this...I decide to export a photo, as master, onto the desktop...fine, the image icon is good, correctly displaying the image thumbnail...if I select it and press the spacebar i obtain ...absolutely nothing,a gray window that should be my image.
This happens also for the 30D files when I export them ...within Aperture they're good.
I also tried to export a version (jpeg)...all I obtain is a totally black jpeg.
Seems that Preview is not working anymore or uncapable to display any raw format, only jpegs are correctly displayed, I mean original jpeg shot.
I went through all the basic library maintenance for Aperture, repaired system permission before and after Lion installation...nothing changes.
Anyone experiencing a similar behaviour under Lion? Is Preview not working only in my system? Any suggestion?
I'm trying to find something to fix this...I have Time machine backups, Aperture vault backups so reverting back to SL is only a matter of patience and time...but I would like to stick with Lion and keep testing.
Any help or suggestion will be appreciated...I'm also searching for similiar behaviour (mostly for the problem with Preview) in the Lion OSX forum, this is heavily affecting Aperture.
Best regards,
Alberto

I found a solution that worked for me. Seems like my firewall did not accept the afp connection permissions anymore after installing lion... Since everything worked well turning off the firewall.
So if you don't want to keep your firewall disactivated here is what worked for me:
- Leave your firewall activated.
- Turn OFF afp file sharing in the sistem prefs
- Restart your Machine
- Turn ON afp file sharing
- You should now get a message if you want to accept afp connections...
- click YES
Thats it... Everything fine on my network now.

ADF Task Flow: Browse and Edit pages

Hi,
My application includes two pages, a Browse page and an Edit page. The Browse page provides the list of departments (read-only table) and allows you to select a department from the list to edit the department details (form).
How can I develop this common scenario using ADF task flows? Important - I need to display Browse and Edit on two different jsf pages.
Thanks, Al

It should be pretty easy.
1) Create your browse and edit page
2) drop them onto a task flow
3) Connect the pages with navigation cases.
4) Set the ACTION property of a button on the browse page to reference the navigation case that goes to the edit page
5) Hook up the reverse to go back to the browse page
Done!

Adobe Reader X re-enabling "Display in browser" option by itself

Hi all,
I've ran into this problem with two users, but can't seem to figure out how to fix it. We've unticked the "Display in browser" option under Preferences a couple of times, but it always re-enables itself after a few hours. I've also disabled the browser addons, and they seem to stay disabled. Reinstallation on Reader X didn't help... Also I can't update the Reader to version 11, because that's not compatible with another software this company is using.
Does anybody have any suggestions on how to fix this?
-Ville

Yeah, I just realized that this company hasn't updated it's Reader package in a while, so I already downloaded the newest version 10.1.4 and I'll try it this afternoon

Transform for Reader 9.2 disables display in Browser

Hi there,
I use the Adobe Customisation Wizard 9 to create a MST file to transform the original Adobe Reader 9.2 msi file. Mostly I use it to automaticaly accept the EULA, but also for some other stuff. I leave the "Display in Browser" under "Online and Acrobat.com Features" untouched on "Enabled", but when the Reader is installed with that transformation file and I try to open a file in Internet Explorer, I get the message that the installed version can not be used to display PDF files in the webbrowser.
After removing and installing the Reader without using my MST, displaying PDFs in the browser works again.
Is the Customisation Wizard not compatible with Acrobat Reader 9.2?
I have uploaded my MST here: http://ul.to/fqxogw
Regards
Christian

I've looked through the 9.1.2 MSI that I have that works with browser integration and the 9.2 transform. I can't find any difference in the Properties or registry entries, so I'm concerned that there has been a code change.
I hope that more info is released on this "feature".

Oracle Database 11gR1 Enterprise Manager Console Cannot Display in Browser

Folks,
Hello. I am running Oracle Database 11gR1 with Operaing System Oracle Linux 5. I have some issues regarding EM connects with the Database Server as below:
First, the default listener is LISTENER with standard port number 1521 and protocol TCP/IP.
Its corresponding service naming S1 is with port 1521 and protocol TCP/IP and hostname localhost.localdomain.
I run this listener in the following way:
Step 1: [user@localhost bin]./lsnrctl start LISTENER (This command runs sucessfully.)
Step 2: [user@localhost bin] ./sqlplus SYS/SYS as sysdba (This command starts sqlplus sucessfully.)
Step 3: [user@localhost sqldeveloper] ./sqldeveloper.sh (This command invokes SQL Developer sucessfully.)
But when start Enterprise Manager Console, it cannot connect with the Database. I do it in this way:
[user@localhost bin] ./emctl start dbconsole
The above command's output is:
https://localhost.localdomain:1158/em/console/aboutApplication
Starting Oracle Enterprise Manager 11g Database Control ... ...
When open the link https://localhost.localdomain:1158/em/console/aboutApplication in browser, this message comes up:
The connection to localhost.localdomain: 1158 cannot be established.
Thus, I add Port Number 1158 into both LISTENER and Service Naming S1. I run ./emctl start dbconsole again and get this message:
The connection to localhost.localdomain:1158 was interrupted while the page was loading.
In order to solve the above issue, I create another listener LISTENER2 and another Service Naming S2 with Port Number 1158 and protocol TCP/IP because
in my point of view, each listener only can have one Port Number(1521 or 1158) and its corresponding Service Naming (S1 or S2) need to have the same Port Number and Protocol (TCP/IP).
But when I run [user@localhost bin]./lsnrctl start LISTENER2, this message comes up: the listener supports no service.
From the message, it seems that LISTENER2 cannot work with its corresponding Service Naming S2 with Port 1158.
EM with Port 1158 cannot display in Browser.
My questions are :
First, Is there any relationship needed to be established between listener(LISTENER2) and Service Naming(S2) in order to display EM in Browser ?
Second, how do folks display EM in browser ?
Thanks.

Folks,
Hello. Thanks a lot for replying. I do the following command: [user@localhost bin]$ wget http://localhost.localdomain:1158/em
The command returns the message:
--11:36:33-- http://localhost.localdomain:1158/em
Resolving localhost.localdomain... 127.0.0.1
Connecting to localhost.localdomain|127.0.0.1|:1158... connected.
HTTP request sent, awaiting response... 200 No headers, assuming HTTP/0.9
Length: unspecified
Saving to: `em'
[ <=> ] 7 --.-K/s in 0.002s
11:36:33 (4.15 KB/s) - Read error at byte 7 (Connection reset by peer).Retrying.
--11:36:34-- (try: 2) http://localhost.localdomain:1158/em
Connecting to localhost.localdomain|127.0.0.1|:1158... connected.
HTTP request sent, awaiting response... 200 No headers, assuming HTTP/0.9
Length: unspecified
Saving to: `em.1'
100%[=================================================================================================================>] 7 --.-K/s in 0s
11:36:34 (16.8 KB/s) - Read error at byte 7 (Connection reset by peer).Retrying.
The above message repeats again and again until finally returns the following message:
11:39:02 (40.2 KB/s) - Read error at byte 7 (Connection reset by peer).Giving up.
In browser, http://localhost.localdomain:1158/em cannot display and pop up a Windows with the message: You have chosen to open whicn is BIN file from http://localhost.localdomain:1158 What sholud FireFox do with this file ? Save to Disk ?
My question is:
I don't know how to display http://localhost.localdomain:1158/em in Browser. How to solve the issue ?
Thanks.

Display of Browser and Fullscreen

Similar Messages

Maybe you are looking for