Display of change documents: Material BOM

Hi,
Using transaction CS80, I wish to display the changes made to a material BOM. However I could not see any output although I know I have made quite a lot of changes to that material BOM.
Am I missing some config or data set-up??
Thanks in advance for your help!!
Regards,
Ragavan

1.Go to the Transaction CS80.
2.Give the required mateiral /plant etc
3.Enter
4.You will find 2 options a.documentovervew b.full
5. select full
6. You can see the complete thigns..
if still the problem is there reply back
thanks

Similar Messages

  • Changes documents for BOM and Routing

    How Can I find the change documents for a BOM and routing?

    Change Documents For BOM
    CS80 - Material BOM
    CV80 - Document Structure
    IB80 - Equipment BOM
    IB81 - Functional Location BOM
    CS81 - Standard BOM
    CS82 - Order BOM
    CS83 - WBS BOM
    Change Documents for Routings
    CA60 - Task List Changes
    CA61 - Routing
    CA62 - Reference Operation Set
    CA63 - Rate Routing
    CA64 - Reference Rate Routing
    Hope the above may help you.

  • Can't display archive change documents for agreement (COND_B)

    Hello,
    I want to display archive change document for object class : COND_B (agreement) via transaction MEB3:
    The archive works fine, and I can found the archive change documents form SARA.
    (Archive Objetc = CHANGEDOCU
    Archive info structure = SAP_CHANGEDOCU2 (is active))
    But the display from the application transaction : MEB3 doesn't work.
    In the DEBUG:
    the Function module is called automatiquely: COND_B_DISPLAY_DOCUMENT
    THEN SUBMIT RSSCD100
    THEN The function module is called with the no parameter READ_CHANGEDOCU (ie with space value)
    THEN the program reads only from DB
    Question : HOW I oblige the program to read from the archive  (READ_CHANGEDOCU = 'X') ?
    I checked these SAP notes 1050935,1299903, 1308024, 1128954, 1050335
    but no results.
    May be I forgot some customizing ( SARA,, AOBJ )?
    Thanks for your help.

    Hi,
    As I understand, the change documents archived using the CHANGEDOCU archiving object are no longer available using the application object.
    Refer to Notes 1257133 and 140255 where they mention the above point.
    If you want to read change documents along with the application, then you must first archive the change documents along with the application.
    In your case, for agreements, you should use object SD_AGREEM so that the change documents also gets archived along with the agreements. Refer to note 761281 to check whether the archiving class CHANGEDOCU is already defined along with object SD_AGREEM in your system.
    Hope this helps,
    Naveen

  • Quirey regarding BOM change documents display -records  not able to underst

    Hi,
    While viewing Change documents  of BOm through CS03--Environment --change documents    ....the following is being displayed
    what does it really refers to ?
    user id is ofcourse :RNDCORE
    can any one provide some inputs ? what it refers and where to get the entire details of these deleted  ....records ?
    55564677   16.07.2008 12:24:33 RNDCORE      CS02  
    STAS    777M00016605010000013300000267   Deleted
    STPO    777M000166050000013300000266     Deleted
    regards,
    Madhu Kiran

    >    
    > STAS    777M00016605010000013300000267   Deleted
    >
    > STPO    777M000166050000013300000266     Deleted
    >
    >
    >  regards,
    > Madhu Kiran
    Hi,
    It says:
    STAS    777M00016605010000013300000267
    777           -Client
    M             -Material BOM
    00016605  - BOM
    01            - Alternative
    00000133 - Item Node
    00000267 - Counter
    Similarly for STPO    777M000166050000013300000266  also.
    Hope this Clarifies.
    Regards,
    Siva

  • Display change documents -reg

    Hi
    while viewing change documents in BOM , CS03--Display BOM --display change documents
    its showing
    Doc No. 53120090  where we can see this document details ?
    which table or through which transaction code ?
    in the change table key its showing
    777M00015839010000000400000009
    ITS GIVING THE DEATISL OF ITEM NODE AND COUNTER ?
    WHAT THESE REFER TO ?
    regards,
    madhu kiran

    hi
    777M00015839010000000400000009
    777-client
    BOM category :M
    BOM number:00015839
    Alternative:01
    Item node:00000004
    Counter:00000009
    these are the internally generated fro every material bom
    -ashok

  • Change document display in BDT

    Hi,
    Can some tell me how to display the change document list for the field level in BDT...CHGD1,CHGD2 and CHGD4 are event where i have written the code to display the list..currently it always display a single record list i.e created...it never show that the field that got changed after the create...but for the standard BP field it list show the field level change..it would be helpful if come can help in this. Or provide a sample code that would display the field level change in the list.
    Regards,
    Raghavendra

    Hi,
    I have some problem as you ...
    Do you finally find which code to put in the event please to display the changes...
    I will appreciate your help because I am completely lost with ..
    thanks in advance,
    Marie

  • Change Documents display with BDT enhancement

    Dear all,
    I have come across below statement while reading SAP help about BDTs
    The BDT offers the display of change documents as a generic service. All application objects and their applications can take advantage of this service through events CHGD1, CHGD2, CHGD3 and CHGD4.
    Please guide me how to implement the change document functionality for BDT screen.
    Thanks and Regards,
    Chandra Madapati
    Removed code tags
    Edited by: Rob Burbank on Dec 7, 2011 9:29 AM

    Hello,
    this article is used for Contract Account, but it is similar.
    [http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/70d0507d-c39d-2b10-a18d-f559293a75ed?QuickLink=index&overridelayout=true]
    br dez

  • Change document information

    Hi all,
    Iam using CJ20N t-code to create project and wbs elements.
    If any changes made to the project or wbs elements in CJ20N.I need to capture the last changed date and time.
    I check the table PRPS,its giving the creation date,
    changed date and username.But i want the LAST CHANGED TIME.
    I try with the function module CHANGEDOCUMENTS_READ but the changes are not captured in that function module.
    I would appreciate if anyone know the solution.
    Thanks,
    Vicky

    Try transaction CN60.
    You may need to use the "Choose functions" button.  Drag and drop the Change document functions "Select" and/or "Display" to activate these in the ALV listing.  Then use the newly added Change document functions to see the changes.
    I just tried this but could not actually get it to display any change documents.  Please let us know if it works for you.
    Message was edited by: James Gaddis

  • Regarding change document generation

    Hi,
    In t-code SCDO, for one object class STUE_V I have added one new table MAST and generated the same.  But while I execute my t-code CS01, the same is not appearing in exporting parameters in the standard program where it is calling my generated fucntion module.
    Hence it is giving dump.  This is part of BOMMAT idoc change pointer creation.
    Could someone shed some light on this as I am really stuck here.

    Hi
    Have you tried generating after adding the table in the class ? This is more a generation issue. Might be the include LCSVBF30 has not got properly generated.
    What I feel is if you are adding a table to a standard class then you must also change the code yourself and SAP is not changing the where used list of the update function calls.
    Refer
    http://www.scribd.com/doc/12627676/Logging-Using-Change-Document
    http://help.sap.com/saphelp_nw04/helpdata/en/2a/fa015b493111d182b70000e829fbfe/frameset.htm
    http://wiki.sdn.sap.com/wiki/display/ABAP/Change+Document
    note - 0000391833  -  No change documents for object dependencies change
    Regards
    Vijay

  • Change Document Read Positions

    Hi Gurs,
    I get an error message in the FM "Change Document Read Positions"
    which is used in FB03 the error message is
    "System error: Error in routine POSITIONEN_LESEN RC
    = 1"
    CDPOS table does not find a value for certain changenumber and hence the select query returs 0 sy-dbcnt
    which is why I get this error message ..
    could you help me in undersatnding where does this CDPOS gets populated and why is this so crucial here and how can I rectify this probs .
    your inputs are greatly appreciated and will be highly rewarded by me ..
    Thanks!!
    Aryan
    Message was edited by: Aryan T

    Hi,
    refer the OSS Note<b> 422547</b>
    Symptom
    When you display all change documents in the customer or vendor master data, the system generates error message F4308 "System error: Error in routine POSITIONEN_LESEN RC=1".
    Additional key words
    FD02, FK02, XD02, XK02, VD02, MK02,
    FD03, FK03, XD03, XK03, VD03, MK03
    Cause and prerequisites
    There are several entries in the change document header table (CDHDR), however, there are no corresponding change document items (CDPO). This may be due to report SAPF019 ("Deleting Master Data") which, in error, only deleted line item data (refer to Note 0134293).
    These change documents are old documents which were created when you used Release 4.0.
    <b>Solution</b>
    Execute report <b>YDELCDHD</b> of Note <b>134293</b> in the test mode and check whether the error is actually due to this problem. If so, execute report <b>YDELCDHD</b> in the update run.
    Source code corrections

  • Displaying change documents(MM03) in Material master

    Hi All
    One User having problem in displaying change documents(MM03) made by the some of the users for the materials
    (It is not the authorization as he is provided with the same to diplay the change doc)
    Kindly let me know how i can view the change docs made by all the uesrs
    Thanks
    Regards
    Manju

    Hi,
    You can check the MM04 Transaction to check the Changes for Material master.
    System will display the date, time & user name who changed the material, if you click the line then system will display all the details for the changed material master.
    rgds
    Chidanand

  • Material BOM mass change error

    Hi gurus,
    When doing mass change of BOM via tcode CS20, i'm getting below error result.
    The following messages were displayed:                                                                               
    Material BOM 00016478 : Delete Item(s)
       19760                                  STM-220-(20UP)78DZ*C06U029(XC06U029)Sn 200
       0130 L 01/01/2002 12/31/9999              1.00  PC     >               1.00  PC
       No batch input data for screen SAPLSDDT 0010
       Folder created/extended
    I wonder what does "No batch input data for screen SAPLSDDT 0010" mean? what should i do to correct this?
    I also noticed that all items on the picklist were grayed out though i can still click on the checkbox button to select the items that I want to be deleted.
    Has anyone encountered this problem? I usually use CS20 during BOM mass change and haven't encountered this kind of problem.
    Hope to hear advise from you all on how to deal with this.
    Thanks and regards,
    Chad

    Dear,
    Error message no is 00344 ?
    Please refer the OSS note  Note 493096 - CS20: No batch input data for screen SAPLCSDI and   Note 180686 - For CS20
    Regards,
    R.Brahmankar

  • Display Changes: Change document

    Hi all,
    I have a ALE link established between two partner SAP systems. When I change some field in the e.g. material master, it triggers an IDoc to the partner system and updates the same.
    In the source system the Changes are displayed in the Change documents for the material.
    However in the target system the change does not reflect although the IDoc did update the material.
    I have looked at the concept of change pointer fields maintained for the message type in BD52 in both systems but no help.
    Please advice what is the criteria for logging the change documents.
    Regards,
    Aditya

    Hi Experts
    I am new in ABAP , I need help to developed report for document changes
    I had gone through the tables there are CDHDR and CDPOS , from this tables
    the following items have to be retrive to display the report as in attachement
    These standards reports are taken from RVSD100 and RVSD200 reports which allow viewing changes on a single sales document in online mode howver the selection paratmeters for these two standard reports does not allow the selection parameters by plant code, document number, date ranges and also does not allow multiple sales document to be listed at the same time
    I need a report that will allow them to list the changes made in the contract documents with more ranges options on the report selection parameters
    basically this customised report will retrive all the changes made in sales contract documents within a plat , date ragne and other selection paramters
    The report must allow ALV display also
    sales office code and sales office description
    + contract document number
    sort by date, header data filed name <01> with old and new values changes and username
    sort by date, header data field name <02> with old and new values changes and username
    etc....
    etc...
    can you please help me how to start do we required funtional module etc.,I know it is easy but i need some push to start.
    regards
    Piroz

  • How to display list of TCodes with Change Documents enabled

    Hi
    I have 42 transaction codes (e.g. QA11, QA12, QE51N, QE01, QE02, MM01, MM02) and I want to verify if "change document" logging is enabled for the critical data elements in these transactions. 
    I'm aware that you can individually check "change document" setting per table via SE11 > Enter Table Name > Technical Settings > “Log Data Changes” option.   Given the number of transactions (with multiple data elements) I need to check though, is there a  table in SAP where the field, table, tcode and existing change document setting can be viewed?
    Thanks
    T-code
    Description
    MM01
    Create material
    MM02
    Change material
    ME01
    Maintain source list
    MSC1N
    Create batch
    MSC2
    Change batch
    QA01
    Create inspection lot
    QA02
    Change inspection lot
    QA11
    Record usage decision
    QA12
    Change usage decision
    QA14
    Change usage decision without history
    QA16
    Collective usage decision for OK lots
    QA32
    Inspection lot selection
    QAC1
    Correct actual quantity in inspection lot
    QAC2
    Transfer inspection lot quantity
    QAC3
    Inspection lot – reset sample calculation
    QE01
    Record results
    QE02
    Change results
    QE51N
    Work list: results recording
    QM01
    Create quality notification
    QM02
    Change quality notification
    QP01
    Create Inspection Plan
    QP02
    Change Inspection Plan
    CS01
    Create BOM
    CS02
    Change BOM
    CC01
    Create Change Master
    CC02
    Change Change Master
    SU01
    Maintain authorizations
    SE38
    Execute program
    COR2
    Change process order
    CC22
    ECM Change Object Management Records
    MMDE
    Delete all materials
    COR1*
    Create process order with material
    QA08*
    Mass change of quality management inspection data
    C201*
    Create Master Recipe
    C202*
    Change Master Recipe
    C298*
    Deletion of Task Lists without Archiving
    QPR4*
    Process Physical-Sample Drawing
    COEBR*
    Batch Record Approval
    QPR1*
    Create physical sample
    QPR2*
    Change sample
    CV01N*
    Create Document
    CV02N*
    Change Document

    hi Raphael,
    you can also use following two table to view the change log at data element level:
    CDHDR - Change document header
    CDPOS - Change document items
    e.g. give the table CDHDR in SE16N enter your transactions field "TCODE", and date parameter, you can see the results.
    Regards
    Javed

  • Change Documents for Material Classification data Changes

    Dear Friends,
    We have configured custom classification objects for material master and also we are able to maintain the material characteristics using MM01, MM02 and also using ALE interface. But I am not able to find the Change Documents in any of the table CDHDR & CDPOS. Please let me know what needs to be done to capture the change documents for a material classification changes in this case.
    Many thanks for you inadvance.
    Beast regards,
    Mallikarjun.

    Change logging of all Classification (including Material Classification) is controlled in the Class type configuration.
    SPRO -> Cross Application Components -> Classification System -> Classes -> Maintain Object types and Class types -> Select Object Table = MARA -> Double Click Class Types under MARA -> Select Class Type 001 and Display -> Check whether "Change Docs" check box is checked on.
    Also check that another flag "Chg. docs for Class" is set on all Objects under the Class type too (by double clicking the Objects folder for a Class type).
    If the Change docs flag is checked on for the relevant Class type and Object then change docs are logged in CDHDR and CDPOS tables for object "CLASSIFY"
    Also the "Change docs" flag cannot be set unless the "Multiple objects allowed" flag is also set in the Class type configuration.
    Please refer [SAP Note 65124 - Classification Change Documents|https://service.sap.com/sap/support/notes/65124]
    Also the above note says and I quote: If "Multiple objects allowed" indicator is not set, start the RCCLUKA2 program. The classification data are converted and the indicator 'Multiple object types allowed' is set. Now you can set the indicator 'Change documents' in Customizing of the class type. However, it only says that change documents are generally possible for this class type. Therefore you have to select objects under 'OBJECTS' for which the change documents are to be written.
    So if the Class type doesn't have "Multiple objects allowed" set (along with Change docs flag not set), there is also a conversion that needs to be run using program RCCLUKA2.
    Also when you transport the configuration to a target system, the program RCCLUKA2 should be run again, refer [Note 379180 - Classification data disappeared|https://service.sap.com/sap/support/notes/379180 ]

Maybe you are looking for