Display of IPTC description during mouse-over in filmstrip

Windows XP SP3, LR3
When you move your mouse over an image in the film strip, you get a temporary popup showing the IPTC title and description fields from the image.
Unless I have missed something, this behavior can not be changed.
This can be a problem when the description field is VERY long.  It can cover up a significant portion of the screen and can be very annoying.
I have a number of pictures where I have a VERY long narative about that particular picture.  It is annoying as I move over these images in the filmstrip and see huge popups momentarly appear.
There should be some way to either disable this feature, or at least limit the amount of description field that is shown.
Gary

Thank you!  I should have thought of that myself.  Now that I think about it, I knew that what was displayed there was controlled by what you have set in View options.
Gary

Similar Messages

  • Anyone know how to make an image appear during mouse over of a hyperlink?

    I have a list of hyperlinks here: http://web.mac.com/phelpssculpture/Site/movieroyal_davidphelps.html
    I would like a small image associated with each link to appear close to the link during mouse over.
    These links are the titles of individual artwork, but that isn't as meaningful as it would be if an image could appear upon mouse over. I tried doing an image of text swap with an image of the piece during mouse over, but that took up too much space on the page.
    Thanks, David

    You could use a tooltip. Here's one....
    http://www.dynamicdrive.com/dynamicindex4/imagetooltip.htm
    A few more....
    http://www.dynamicdrive.com/dynamicindex5/

  • Bookmarks and tab titles display garbled text or text from another bookmark until moused over

    I just upgraded to Windows 8 and loaded Firefox 18 - I imported my bookmarks HTML file and the bookmarks on the left display either garbage or the wrong title until I mouse over them. They then display correctly unless I mouse over them again. My tabs display bookmark titles until I mouse over them.

    Could you try version 18.0.1? Also, please provide us with screen shots? And, you can check if your add-ons are causing this as well.
    '''Try the Firefox Safe Mode''' to see how it works there. The Safe Mode is a troubleshooting mode, which disables most add-ons.''
    ''(If you're not using it, switch to the Default theme.)''
    * You can open the Firefox 4.0+ Safe Mode by holding the '''Shift''' key when you use the Firefox desktop or Start menu shortcut.
    * Or use the Help menu item and click on the '''Restart with Add-ons Disabled...''' menu item while Firefox is running.
    ''Don't select anything right now, just use "'Start in Safe Mode"''
    ''To exit the Firefox Safe Mode, just close Firefox and wait a few seconds before using the Firefox shortcut (without the Shift key) to open it again.''
    '''''If it is good in the Firefox Safe Mode''''', your problem is probably caused by an extension, and you need to figure out which one.
    Please follow the [[Troubleshooting extensions and themes]] article for that.
    ''When you figure out what's causing your issues, please let us know. It might help other users who have the same problem.''

  • Images in Table move on Mouse Over

    I made a simple table-based photo gallery.  
    On mouse-over, a coloured bar appears at the bottom of the selected image.  At the same time the image moves upwards slightly, presumably the same distance as the width of the coloured bar.  
    Depending on the position of the image within the table, either one or more rows within the table move at the same time.
    I received some feedback from a viewer that they do not like this movement of the table
    Can you suggest any way to make the table more stable, i.e. remain still during mouse-over.
    See: http://www.eyta.org.uk/photos.html

    First, I don't like table-layouts.  They're last century's layout approach.  Nobody uses table-layouts anymore.  We use CSS floats now.
    Photo Layout example:
    Alt-Web Templates :: CSS Semi-Liquid, Photo Proof Sheet
    Secondly, if you're adding a border on hover, you need to add similar same sized border for the non-hover state.  Otherwise the jumping is inevitable owing to how the CSS box-model works.
    Example CSS:
    a {text-decoration:none; border-bottom: 1px solid #FFF}
    a:hover {border-bottom: 1px solid #000}
    Nancy O.

  • Change color on mouse over

    Hi, how can i change the color of column heading during mouse over a particular column.?
    Does anyone know any html code for this?

    Hi, how can i change the color of column heading during mouse over a particular column.?
    Does anyone know any html code for this?

  • Mouse over of detailed navigation nodes?

    Hello EP Development Gurus,
    I am in need of displaying some text on the mouse over of the detailed navigation nodes. How can I achieve this? Where can i find the java script code relating to it?
    Helpful answers will definitely be rewarded. please help me.
    Thank you all in advance.
    best regds,
    Alagammai.

    Hi Harish,
    Thank you for your immediate reply.
    I think even if I create a full paged iView, the navigation panel will be there.
    I don't want the left side navigation inside the content area.
    In the existing default navigation panel, i need to display some mouse-over text.
    To be exact, I need the par file that contains the javascripting relating to the detailed navigation part. I checked in par files like <b>com.sap.portal.navigation.detailedtree</b> and <b>com.sap.portal.layouts.framework</b>. But no use. I am not able to find the relevant code there.
    If I am not clear, please get back to me.
    best regds,
    Alagammai.
    Message was edited by: Alagammai Arunachalam

  • Mouse over display stays on top when Firefox isn't front app

    FireFox 3.6.10 but has been going on a few versions.
    On startup the FireFox icon I double click on my desktop is in the same screen location as one of the hot bar items. When Firefox finishes loading it displays the mouse over information for that hotbar item despite Firefox not being the front application, and mouse being moved. The floating window doesn't go away until Firefox is made the front application, and this blocks the front application.
    Its a minor annoying bug, but happens every time FireFox is launched.

    Hi NicoMan,
    According to your description ,we seem to suffer a performance issue here.
    Have you tried to open the task manager to check the system performance  ? Is there any specific process occupied many system resources ?Will the issue occur only with the specific applications ?
    We can try to restart the Windows Explorer process to have a check.
    If it only occurred with the spefcific two applications ,we can try to end the other application processes manually from the task manager to have a check .
    If this is caused by the specific application ,we may need to look for help from the third party support considering they are all the third party applications .
    Best regards
    Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact [email protected]

  • How to get mouse over shape to display data in Visio 2013?

    Hi Visio pros,
    I am required to create a diagram of our servers rack setup and will be publishing to a Web page using Visio 2013.
    The goal is to mouse over the server shape and have the data be displayed. I have followed arguably every solution on the internet. I am either doing it wrong, or it might be outdated information.
    I'm hoping Paul Herber, or other Visio pros would be able to help me with this situation as I am on a tight schedule and have exhausted my resources.
    Things I have tried:
    user.visEquivTitle in ShapeSheet
    http://visualsignals.typepad.co.uk/vislog/2012/02/no-mouseover-with-visequivtitle.html
    and
    prop.(data name) in the comments within the miscellaneous section of the ShapeSheet.

    Hi Sir!
    I am open to the possibility that I may have done something wrong as I am very new to Visio.
    Here are the steps I followed:
    http://visio.mvps.org/ShapeSheet/
    Browser that I am using is Internet Explorer since I ran into problems with Google Chrome.
    However, after more reading I noticed the User.visEquivTitle provides a tooltip. If it is what I think it is, which is a small yellow box displaying a string, my employer would not want that.
    We're looking for something that will provide an aesthetic display of data after mouse over onto the shape.
    Thank you very much for your help.

  • Why does moving the mouse over an IMAQ image display slow the GUI down so much?

    I have a large application with several vi's running simultaneously under labview 8.6.1.  When I mouse over an image display control in one of the vi's, everything slows down a shocking amount in all the other vi's.  The windows task manager does not show a large increase in CPU use.  My pc is has a quad cpu with 4GB of RAM, and the CPU and memory loads do not appear to be terribly taxing to the system.  However, many of my vi's apparently come almost to a standstill if I just move the mouse in a circle around my image control.
    This looks like it is largely a GUI display issue.  If I make a new vi and put a while loop in it that only displays the iteration loop number to an indicator, I can see the iterating occurring, then stopping totally when I mouse inside the image display control.  When I stop moving the mouse inside the control, or when I move it outside the control, the interation loop number jumps up, as if it had been incrementing behind the scenes the whole time.  So only display of the interating was halted.
    This problem occurs even if the vi with the image control is not executing.  If the vi with the image control is open but not running, and I mouse over the image on it, the other guis all come to a screeching halt.
    Does mousing in the image display control really utterly crush all other guis in all other labview windows?  Is this an issue inherent to the image display control?  If so, is there anything I can do about this? 
    Also, this issue is not entirely limited to display.  I started looking at it in greater detail because this issue also exposed what I think is a race condition in my code.  I have a vi that acquires an image from a ccd and puts it into an IMAQ image.ctl.  This image then gets passed up to a vi up the call chain, and is put on a queue and sent over to be de-queued by a vi that has the image display control.  Here's the kicker:  when I mouse over the image display control, the image successfully gets acquired inside the subvi, and if I probe the wire leading to the output IMAQ image display.ctl, I see the image.  If I simultaneously probe the wire coming out of the subvi one level up the call chain, the image gets lost about half the time.  This only happens if I am mousing in the image display control IN A TOTALLY DIFFERENT AND SEPARATE VI.  If I bump up the priority of the ccd image acquisition vi to 'highest priority', the problem only happens about 1% of the time, and I really have to mouse around to make it happen.  Still, it's disturbing that mousing in the GUI in one window results in a failure of a separate subvi to simply pass an image up the call chain.  I understand that IMAQ images are referenced rather than passed by value, but I don't see why there should be a failure to pass the image up the call chain.  I've looked for a race condition, but can't find one.
    Eric

    I have finally been able to replicate the behavior that you are seeing on another computer once the image was large enough.  Here are a few notes about this behavior:
    First. The UI only slows down when the images are large, 16 bit images.  The reason why this is unique to 16 bit images is that they can only be displayed on the front panel as 8 bit images.  The workaround that Weiyuan suggested to change the 16 bit display mapping hints towards the root of the problem...that any time a mouse runs over the indicator, Windows asks the entire image to re-draw (having a separate indicator overlapping the image will create the same behavior).  With a 16 bit image, not only does the image have to re-draw on the screen but the 16 bit pixels need to be mapped to 8 bits.  When setting the 16 bit display mapping to Full Dynamic, this requires mor computation/pixel than 90% dynamic or one of the other mapping schemes.
    This is expected behavior if your program is running and you're trying to display a large 16 bit image.  To fix this behavior there are a couple options:
    Change the 16 bit display mapping to something other than full dynamic.  You can choose which 8 bits to display or if you want to map the bits. 
    Resize the image just for viewing purposes on your front panel (since you aren't going to view every single pixel of you image on the screen). You can use the IMAQ Resample.vi to do this.  This will allow you to take your 1500x1500 pixel image and only display a 500x500 pixel version.
    If you are interested in viewing small details of the large image, consider just displaying a smaller region of interest at a time.
    Let me know if any of these solutions work for you.  Good luck on your application.
    Zach C.
    Field Engineer
    Greater Los Angeles

  • Mouse Over Info displays immediately at Finder, Mail, Cyberduck etc.

    Hi, I have a new Problem with my Mac -
    At Finder, Mail, Cyberduck the yellow Info displays by Mouse Over displays immediately while using the Cursor.
    Normaly the Infos about a Folder or File appear a few seconds after the mouse is still on it - but in my case it appearing directly.
    Can somebody help ?
    THX
    Henning

    Hi
    since it's several apps - try the tip at http://hints.macworld.com/article.php?story=20061107125819464 or at least a
    defaults read -g NSInitialToolTipDelay
    to see if that's the cause
    Is a New User Account the same ?

  • How do you display a swf video / videos when you mouse over

    How do you display a swf video / videos when you mouse over, It'll be something like a pop up but just that it doesn't open in another windows but within the same window and will be like a pop up roll over image.

    Thank you for the reply.
    I've been putzing around with it and came across the 'SetEventHandler' object and thought I'd try and make that one work.
    Here's what I've got so far.
           <mx:SetEventHandler target="{turnAroundMovie}" name="handleMovieClip" handler="stopMovie()"/>
    And then my fuction.
       <mx:Script>
            <![CDATA[
                private function stopMovie():void{
                    turnAroundMovie.stop(); <!-- here's where I'm getting stuck -->
            ]]>
        </mx:Script>
    My first instinct was the simple stop(), but that didn't fly.  I even added a stopMovie frame in my .swf and tried a gotoAndStop('stopMovie'); but that didn't fly either.  And that's kind of where I'm stuck at.

  • Display comments on mouse over

    Hi Gurus,
    I need to display comments on mouse over on the cell in web report.
    In a web report, when a user right click on a cell and click 'Goto' and 'create comment' and enters and saves a comment then I can view the comment using a 'List of documents' web item.
    But I need to see the comments directly when the 2nd user mouse over on the same cell.
    can any one please help me out to do this. we are in 3.5 environment.
    Thanks
    Prasad

    Hi,
    Check out this link mentioned below:
    https://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/1035ca90-0201-0010-13b7-9a35063d6a18
    In this, when u goto page 20, there ia one SAP BW URL, which will help even to add a tooltip in WAD 3.5.
    I havent tried it, but you can give a try.
    Hope this helps you.!
    -Pradnya

  • Why can I not see the URL display when I mouse over a link?

    When I mouse over a link the URL does not display at the bottom anymore and I cannot figure out how to make it display so that I know where I'm going before clicking. I only just recently noticed this happening and am not sure what changed.

    Your above posted system details show outdated plugin(s) with known security and stability risks.
    *Next Generation Java Plug-in 1.6.0_17 for Mozilla browsers
    Update the [[Java]] plugin to the latest version.
    *http://java.sun.com/javase/downloads/index.jsp (Java Platform: Download JRE)

  • Mouse over values not displaying properly for the Combination Chart

    Hi All,
    A Combination Chart has the following details:
    Primary Y Axis has Revenue in mn $.
    Secondary Y Axis has %.
    When the mouse over is being done, 4% is being displayed as .04
    It should be displayed 4% & not as .04
    The Mouse over values has the Number format as u201CNumericu201D.
    Sometimes, it works in u201CGeneralu201D format. (%)
    However, there is no control on the no of decimal places displayed for the value of Revenue (Primary Y Axis value).
    Whereas, in Numeric format, decimal places can be adjusted.
    Secondary vertical(value) Axis Labels has "Percent" as the Number format.
    Please suggest a solution.
    Thanks,
    Raghu Ram

    Hello.
    Look I have an idea, I donu2019t know if you already try it.
    Please give the format that you want percentage, decimals etc...
    In the Excel where the charts are being directed
    Then redirect de chart to the same cells, these with the porpoise of refreshing
    Now each serie have the format.
    Please let me now what happen with these

  • Does Adobe Reader have the plug-in to display the word definition when moving mouse over the word?

    Hi,
    I would like to know if Adobe Reader has such plug-in that displays the word definition when the user moves the mouse over the word.
    Basically I think it needs to
    detect what word is presented under the cursor
    look up the word in the dictionary or source file e.g.xml
    pop up the definition of the word, which can be a translation or definition
    It would be great if user can actually customize this dictionary file/source file.
    Do you think there is such plug-in?
    Many thanks for your help/advice here.
    Cheers
    SX

    Hi,
    When I use Adobe Reader “look up” function, it takes me to dictionary.com. I am wondering if Adobe Reader allows me to customize this look up function, so I can use another website or my offline dictionary, instead of going to dictionary.com.
    Many thanks for your help/advice.

Maybe you are looking for