Display of Key Figure's Names in the Navigation Panel

Hello all,
Is anyone know how to display the key figure's names list in the navigation panel, as in that eLearning presentation
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/d049b14f-775c-2a10-9ea2-9d670feaf2fe
(I'm talking about Net Sales, Sales Plan and Deviation % on the left)
I didn't know it is possible until I saw that link.
Thanks!

Hi Ron,
I know, are passed 3 years to your post but I'm searching the same answer to your question, have you found it?
Anyone can help me?
Thanks a lot.

Similar Messages

How to influence the text display of key figures in the interarctive DP

Hello all,
Does anyone know if there is a possibility (BADI, etc.) to change the text display of key figures (not characteristics!) in a planning book/data view?
I know that you can define a free text in the data view but still, this is only one fixed text and it cannot be changed.
Reason for the request: We would like to use the same key figure (and hence, indicate 2 different texts) for two different purposes (in different selections) without having to create a new data view.
Kind regards,
Klemens

if you dont want a new data view and might even go to the extent of creating a user exit for this ... here is an idea
- just create auxillary KF ( or use spare Temp KF depending on what you want to do with the data in the view) for each of these KF with the text
lets say you have KF1 and KF2 - create KF1A and KF2A
Make sure KF1A = KF1 and KF2a = KF2
Now depending on user you can display KF 1 and KF2 or KF1a and KF2a depending on the user by using macros USER() and ROW_VISIBLE(0)

Exception defined on a formula does not chande display for key figure

All,
I have an exception defined on a formula included in the key figure structure based on which the display for another key figure should change. The display is changing for the formula and not for the key figure as i would like for it to do.
The setting of the exception is set to display on "following structure elements" and points to the key figure and is defined on the formula.
This behavior is exhibited correctly when run through BI 7.0 Query designer portal however when executed using Analyzer both 3.5 and 7.0 version i am encountering this issue.
Any help is appreciated.

I believe you are using 3.x.
Please mention the version of BW in the problem statement.
If you dont want to use exception aggregation in the query the second option is setting this property in the backend for the keyfigure. But I believe that you are trying to set this for the CKF, so I dont see any other option to generate exception aggregation.
I would like to comment on your reasons why you dont wnat to usee the exception aggregation.
1. It is not working: If it not working, you should contact SAP for this. Exception aggregation is 20% heart of any query and it is very rarely used things in reporting.
2. It is obsolete: I am not sure, if this is correct. There are many industries where you cannot built certain reports without exception aggregation. The simplest report of sales where you are asked to find the rate of the material from Total Sale and Quantity at aggregation level can not be created without exception aggregation. So this option is and will never obsolete.
Please try using before aggregation.
- Danny

Display metadata instead of clip name on the clips in the timeline and in the source monitor

Is there a way to display metadata instead of clip name on the clips in the timeline and in the source monitor? Clip names are usually set by the camera and are of no use to me. What i would like the clip and the source monitor to display is the name of the shot from the metadata. That's,in my opinion, a very useful info when you're editing a film. If that feature doesn't exist, is there a way to batch rename clips based on metadata?

thanks
is that new or was that always there. Not to sure if I have tried that in the past
anyway it helped and will makes things much faster
one other question maybe you have an answer to that too. it seems both Audio tracks are independ when putting on keyframes is there a way when using keyframes in the time line that it affect both channels of audio for example a1 an a2
once again thanks for your help

How can you display only one artboard in the Navigation Panel?

I would like to be able take advantage of the Navigation Panel as a thumbnail view of the artwork I am illustrating. The Adobe Illustrator file has 5 art boards. Is there an option in the Navigation Panel to view the art board I am working with, alone?

> That could work if all of the group items were the same size.
Why would that matter? Each GroupItem has its own controlBounds, height, width, position properties. Each Document has its own height, width, pageOrigin properties. The script would reference those properties to position the Group in the center of the document.
JET

Customizing: Adding an action to the Navigation panel

Hello,
A customer has asked me to add an action based on a webdynpro component to the Navigation panel.
He provided me with the component name, the package and the url.
I already figured out that this has to be done in SPRO > SAP xApp Resource and Portfolio Management (SAP xRPM) > Global Customizing > Process and Service Settings > Define Navigation, but i have no clue how to add this action based on the information i have.
Could anybody give me a hint or a link to some good documentation about this topic.
Any help will be apreciated
Regards,
Magnus

make use of ActionMap and ImageMap:
//the action
Action theAction = new AbstractAction("New") {
public void actionPerformed(ActionEvent e) {
//do action
//accelerator for action
theAction.putValue(AbstractAction.ACCELERATOR_KEY, KeyStroke.getKeyStroke("control N"));
//input map and action map from table
InputMap im = table.getInputMap(JTable.WHEN_FOCUSED);
ActionMap am = table.getActionMap();
am.put("New", theAction);
im.put((KeyStroke)theAction.getValue(Action.ACCELERATOR_KEY), "New");

Hiding or deleting the Quick create pane in the navigation panel

Hi friends,
Can anybody tell me how to hide or delete quick create info pane in the navigational area.
As of now we are displaying some data in the quick create info. But my requirement is not to display this quick create info at all in the navigation panel.
So in my navigation panel i should have only detailed navigation and portal favorites apart from the quick create.
Can anybody pls guide how should i do it , its urgent....
Thanks& Regards
Sireesha.

Hi Sireesha ,
Look at this weblog , you can be in a position to change the portal framework
MastHead Change & Portal Desktop
Look for the Dekstop innerpage , you can add and remove the properties.
Thanx
Pankaj

Lightroom shows wrong picture in the Navigator panel

Hello,
Just look at the screenshot the picture in the navigator panel.
Regards,

There's a setting in the Interface Tab of the LR Preferences which is "Show photos in Navigator on mouse-over", and I supect you have that enabled (which it is by defaut, IIRC). With this setting checked, then as you mouse-over either a collection or a folder the navigator displays the first image in that collection/folder, regardless of which photo is currently selected.
Looking at your screenshot, you have the collection "All" selected, but your mouse is currently hovering over the collection "Fete", so I think the navigator image would be the first picture in the "Fete" collection.

Change the order within the navigation panel

Hi everybody,
within my navigation panel i have two iview, the detail navigation and an own iView (Web Dynpro within the dynamic navigation of a page). Until now the detail navigation appears at the first position in the navigation panel. How can i change the order within the navigation panel so that my own iView will be shown at the first position?
regards,
Sid

Hi Raji,
iviews can be ordered alphabetical. You can set this function in Systemadministration -> Service-Konfiguration -> Applications -> com.sap.portal.ivs.iviewservice -> iViewsSrv. Then you can set this value to ture (sorting true).
You can also change the sort-priority value in the property of each iview to 0..n.
I hope this will help you.
regards,
Sid

How do i change the text in the navigation panel?

just want to change font color in the navigation panel as i cant see some colors

Try a different persona or the default theme if you have a problem with the background of your current persona.
See [[Using themes with Firefox]] and http://kb.mozillazine.org/Themes (Lightweight theme)

How to add links in the detailed navigation area of the navigation panel

hi everyone,
I had developed 4 iviews. 2 of those iviews i added to 2 different pages. And the 2 pages added to workse and assigned a role. i assigned this role to user. and it is working fine.
i want to add remaining to iviews as links.
how to add the links in the detailed navigation area of the navigation panel.
regards
sunil kumar.ch

Hi sunil,
Create a JSPDynPage component(C) having 2 hbj:link whose hrefs point to these 2 iViews(A and B). U can get the href of the iView by previewing it(for A and B). Create an iview from the par component (C) and add it to the DLN so that it shows the links to ur iViews(A and B). U can make the Show Tray property of this iView (C) to false.
Regards,
Harini S

Can't change a Restricted Key Figure technical name in QD BEx 7.1.0

A few days ago I created a new Restricted Key Figure in Query Designer and it was autopopulated with a default technical name. So I immediately changed it to 'ZRNPVORDINTFACTPPP_FY'.
Now, today, I realized that the 'F' in the technical name is a typographical error and I need to remove it. I clicked the Restricted Key Figure on the left from within the list and clicked the Change/Display pencil icon in the properties window, but the Technical Name field is still greyed out. Also tried right clicking and selecting Edit, but same problem.
Would removing all instances of where the figure is used in the query and other queries allow me to change it? Could it be a user rights issue?
As always, thanks for the help!

Hi,
After creating a RKF , you cannot change its technical name.
If the RKF has a lot of restrictions and creation of another similar RKF is a big process ,
you can create a copy of the same through transaction RSZC.
In RSZC , give the source and target cube name as the name of the multiprovider on which your query is built,
select restricted keyfigure ,click on execute , in the list which comes after execute find your KF 'ZRNPVORDINTFACTPPP_FY'
and click on transfer/copy option available.Change the technical name as you want and then click on execute. A similar keyfigure with the desired technical name will be created in query designer ,global keyfigures .
Replace the same with your Old keyfigure in report.

Regarding currency translation for Display attribute(key figure)

Hi Gurus,
How can i do currency conversion for MATERIAL COST(key figure) ,which is Display Attribute of MATERIAL...
thanks advancely.......
CHANDRA

Hi,
You can create the currency conversion type in the T code RSCURR.
Here are the steps...
1.     Transaction for creating currency translation type is RSCURR
2.     Choose the Exchange rate, Source currency, Target Currency and the Time reference in the respective tabs.
3.     In the query definition choose the Currency Conversion Key in the properties of the Key-figure.
Regards,
Yogesh.

Characteristic display after Key Figures

Hi,
I need to display a characteristic in last coloumn of the report.
i.e., after all the key figures.
is it possible ??
regards,
KV

when i created new selection and dragged this field...
display format:
KF1          KF2      KF3
Field 1      Field2    Field3
and if I drag field under all the KFs.
display format:
KF1         KF1        KF2        KF2
Field1-A   Field1-B Filed-A    Field-B
there are 2 values in field A & B.
regards,
kv
Edited by: K V on Feb 24, 2009 1:29 PM

Displaying Restricted Key Figure Based on Fiscal Year

I'll try and explain my problem.
We have created a query using the CCA cube. We created 3 restricted key figures each with a different budget plan version. They are called 'AB' ,'PB' and 'RB'. When the user runs the query it will show planned values out for 5 years. So for example right now we are in Fiscal year 2006.
The problem is that 'AB' is only valid for year 2006, 'RB' may only me valid for 2007 and 'RB' may only be valid for 2008 - 2010. They use a different plan version for different years, If I place all three columns on the report I get zeros when the plans are not valid. Here is what I would like: When the fiscal year changes somehow select the correct restricted key figure to show and also adjust the text to reflect the fiscal year.
Its like my variables are dependent on the fiscal year displayed.
Any help would be great.
Rick

Hi Richard,
Have you tried out the Suppressing Zeros options in query properties...if the whole column is blank for a particular year, you should be able to suppress it. Click here for more info:
http://help.sap.com/saphelp_nw04/helpdata/en/1e/99ea3bd7896f58e10000000a11402f/content.htm
You can use text variables in the RKF description to reflect the year for which the data is being displayed.
Hope this helps...

Display of Key Figure's Names in the Navigation Panel

Similar Messages

Maybe you are looking for