Display of long text message
Helllo Expert,
I want to display a long message, In module pool program . I have maintain the other message of the program in message class but the long message is not fitting into the message class. the message which I want to display is *"Data saved. Market group (&) and market super group (&) saved. Market (&), market (&) and market super group (&) saved" I have tried using text-xxx but it's not allowing after WITH only 4 field allowed.
Thanks .
You can use the function module
HELPSCREEN_NA_CREATE
to display the long text of the message!
Regards
Naren
Similar Messages
-
Loaded data is not yet visible in Reporting (see long text) Message no. RSM
Hi All,
I have one issue in BI part of Solman. For one of the scenario of Solution Manager uses its own BI component (BI_CONT 7.03 SP08 SAP_BW 700 SP15).
There is one background job which has to update the data in one of the infocube 0SMD_PE2D. This job is getting failed for the past 2 months.
When i check the logs of that background job, it shows the long text as below.
Loaded data is not yet visible in Reporting (see long text)
Message no. RSM1130
Diagnosis
There is an inconsistency between the load status of the data and the option of reporting on this data.
There is data in the InfoProvider that is OK from a quality point of view, but is not yet displayed in reporting.
The problem, for example, is to do with request 0000000494, number APO_R4CEHVODV7XS7MRL741GSMV9UB.
Procedure
Choose Refresh to remove the inconsistency.
I went to RSA1 and selected that cube and choose "Execution changes - Manage". On the right hand side under request tab page it shows all the requests with request status as Green. In Monitor there is No Data Available
I found a similar thread [Loaded data is not yet visible in Reporting for Data Mart destination cub; unfortunately solution is not updated.
Could any one help me
regards
NaveenHi Aduri,
In LISTCUBE i am getting the following error
SQL Error 0
Unknown error in SQL interface
System error in program SAPLRS_EXCEPTION and form RS_EXCEPTION_TO_MESSAGE
Source system is Solution Manager only, production client and BI by default its running in 001 client. We dont have any APO system in our landscape.
Kindly advice
Regards
Naveen -
Error occurred in derivation rule. See long text ; Message no. K/110
I am facing the below error when posting document in FI
Error occurred in derivation rule. See long text
Message no. K/110
CO-PA Characteristic Derivation
Diagnosis
Step 0166 5400: Profit Center in Inventory Posting
No derivation rule entry was found for the specified source values valid
on 02.04.2014.
The derivation rule was defined so that an error message is displayed
when this occurs.
The system could not find a rule entry valid on 02.04.2014 for the
following source fields:
Product Group
Procedure
Create a rule entry for these source values and make sure that rule
entries exist for all the source values.
If you do not want the derivation to be performed in every instance, you
can also change the derivation rule so that no error message is
displayed if a rule entry is missing.
Maintain entries
Maintain derivation strategy
In KEDE:
In KEDR:
Please help me what might be the reason.Hi Thanga,
I don't think this is the right group to ask questions relevant to Controlling-Profitability Analysis.
otherwise, it seems in your 'Characteristic Derivation/ Display Rule values' you are missing an argument 'to Product Group', therefore the system gives you this error 'The system could not find a rule entry valid..'.
hope this will help you.
Kind regards,
Renatas -
Error occurred in derivation rule. See long text, Message no. ABADR100,
Hi
I am making some testing and I have the following message , which is about the functional area. I did not use the FM derive:
Error occurred in derivation rule. See long text
Message no. ABADR100
Diagnosis
SAP - Original Generic 4.7 Ver: Funded Program fro
No derivation rule entry was found for the specified source values valid on 22.06.2011.
The derivation rule was defined so that an error message is displayed when this occurs.
The system could not find a rule entry valid on 22.06.2011 for the following source fields:
Financial Management Area/Functional Area
Z001/6000
Procedure
Create a rule entry for these source values and make sure that rule entries exist for all the source values.
If you do not want the derivation to be performed in every instance, you can also change the derivation rule so that no error message is displayed if a rule entry is missing.
please helpHi Thanga,
I don't think this is the right group to ask questions relevant to Controlling-Profitability Analysis.
otherwise, it seems in your 'Characteristic Derivation/ Display Rule values' you are missing an argument 'to Product Group', therefore the system gives you this error 'The system could not find a rule entry valid..'.
hope this will help you.
Kind regards,
Renatas -
No items selected (see long text) Message No: MSITEM033
Hi Sapiens,
I am trying the command (FS10N) to display the Balance, bal is displayed afterwards and then when I am just clicking the balance for one of the month I am getting the message as follows :
"No items selected (see long text)" Message No: MSITEM033
No line items meeting your selection criteria could be read. This could be for the following reasons:
1.) No corresponding items have been posted.
2.) You are not authorized to display this data.
3.) The items have already been archived.
Thank You in Advance
MSHi Madhu,
Possible symptoms:
1. The system does not generate any line items and/or open items.
2. The field SKB1-XLGCLR is filled with '/'.
3. You transfer G/L account master data to different company codes
using transaction FS15 (program RFBISA10). During the direct
transfer with the "Update File Immediately" option, the system
issues error message FH 700:
Field '': Enter ' ' or 'X'
4. When you process the batch input session that was created by the
program RFBISA00 or RFBISA10, the system issues error message 00 349
"Field SKB1-XLGCLR does not exist in the screen SAPMF02H 0110".
please see the solution from the attached note 1323960:
steps 2-6:
2. Generate the program RFBISA02 using the program RFBISAG0:
3 Generate the program RFBISA11 using the program RFBISAG1:
4. Generate the program RFBISA52 using the program RFBISAG1:
5. Generate the include using the program
SAPGL_ACCOUNT_MASTER_GENERATE:
6. For symptom 1 or 2 only:
I hope I could be of assistance.
Kind regards,
Fernando -
Casio GzOne Ravine 2 cuts off long text messages
Is there a way to scroll to the remainder of a long text message?
When you open the text message and it is showing on your screen, is there a scroll bar to the right? Can you use the arrow keys to scroll? (The directional arrows around the OK button?)
1. The received message display appears when a new message arrives.
2. To display the message, select View Now and press the Center Select Key (OK button)
From there you should be able to use the directional keys to scroll through the received message. -
Can no longer send long text messages to an android device
In the last month, whenever I send a relatively long text message to a non iPhone user (Galaxy s5), that person will not receive the message at all. On my screen it says that the message was sent, but they are not receiving it. I used to never have this problem before. After a while, I went into my settings and put on the character count option to see if it would help me. I realized all my messages over 160 characters would not be received, and all messages with an emoji that have over 70 characters would not be received. This is really frustrating and I would love if someone could help me see why this is and if there's any way to fixing it.
This is really strange behavior, Edgar08. I want to make sure those messages reach their destination. Have you noticed if this is affecting a specific contact or multiple contacts? What iOS is your phone on? Settings>General>About>Version.
AndreaS_VZW
Follow us on Twitter @VZWSupport -
Why can I no longer text message on the larger format by turning my phone?
Why can I no longer text message on the larger format by turning my phone on its side?
Hi,
Since iChat 6 the SMS option in the Menus has disappeared.
However if you add the number to a Buddy List as if it were Screen Name but with the leading +1 (as in +1234567890) it will work over AIM.
It only works to US phones on some Carriers.
9:44 pm Wednesday; January 8, 2014
iMac 2.5Ghz 5i 2011 (Mavericks 10.9)
G4/1GhzDual MDD (Leopard 10.5.8)
MacBookPro 2Gb (Snow Leopard 10.6.8)
Mac OS X (10.6.8),
Couple of iPhones and an iPad -
Hi. How do I get to the start of a really long text message conversation without having to scroll through and load earlier messages repeatedly? Thanks
click on the top of the screen (the top bar/clock sectionish). Hope i helped
-
Long text message comes in as multiple messages out of order
I understand why long text messages come in as multiple messages but why are they not in order?
It's like someone cut the message in many pieces and delivered them with no regard to sequence.SMS is a carrier service, did you talk to them about it?
It's hard to say what actually happened. Maybe the sender was editing the first then send the second or third before sending the first.
Or maybe the first sent was not successful but the second was good before the first came through.
Message was edited by: ckuan -
How do I convert a very long text message into a multimedia message
How do I convert a very long text message into a multimedia message
Well, you didn't mention Mac, but to my knowledge, TouchCopy works on both platforms. And, my understanding of the OP was to send each one individually, whereas WiseJD was referring to selecting them all so you could copy them all and send, rather than emailing each individual piece.
It wasn't that I thought it was rude, but that it was a complaint about something that someone said a year ago. You did not come here to ask a question, or indicate at all that you were looking for a solution to a similar question. It was just that you came on, slammed a response and left it at that. Those of us that take the time to answer people's questions as volunteers and users just like you. If you spend a great deal of time here, you will see a lot of different types of questions/comments that can get on your nerves. Here is a link for TouchCopy and it does work on both platforms. http://www.wideanglesoftware.com/touchcopy/ -
I have a 4 month long text message thread conversation. What's the quickest way to get to the very beginning of the conversation?
The startup.exe file is locate in the \NI-RT\STARTUP directory. 'cd NI-RT' then 'cd STARTUP' should get you to the right place after making the connection with ftp. I don't recognize PH_EXEC.EXE. Logging in as anonymous is fine. I don't recall seeing documentation on the file structure and locations on the module but I'm sure there is some. I just wandered around w/ftp.
The program to update the node should be below. Enter the IP address, the green light will confirm the node is found.
The version function scans the existing startup.exe for a string beginning and ending with " RU Version " and prints everything in between as the version.
The autostart function will copy the existing ni-rt.ini file to your computer, mod
ify the autostart as requested, then put the file back. Leaves the copy on the PC, which can be handy.
Send file will request a file of the format startup*.dat which will be renamed startup.exe and ftp'd to the module. Lets you keep version numbers in the filename on the PC side. Your directory structure probably won't match mine so you'll have to browse for your file.
Reboot module reboots the module.
Hope this is useful, let me know if anything doesn't make sense. Thanks.
Matt
Attachments:
RNconfig.exe 855 KB -
I cant send long text messages
I have noticed that everytime I try to send a long text message (over 160 texts) the person never recieves it. In combination with no notificatin of going over 160 characters, not being able to resend or cut and paste this is becoming a big and annoying problem for me. Is there something Im missing or is this just another major inconvience of the iphone? I love some things about the phone but there sure do seem to be some major flaws. Any help/advice?
thank you for such a quick response. Yes the recipient is another at&t customer using a blackberry. I never had a problem sending long text messages before getting my iphone (think the record with my old phone, a sony ecrisson w580i was 10 text messages long). I tried testing it today sending one that was 159 characters and one that was 161 characters, the 159 was recieved while the 161 was not. I tried contacting at&t and recieved a very shady answer (they suggested maybe the signal in the area which I reluctantly accepted at the time, however as time has gone on it has become obivious this is not the problem). I figured it must be another iphone characteristic however the lack of other owners mentioning this problems led me to seek help.
-
Hi,
Please help.
I had to change long text message which I did using SE91 transaction. A popup window appeared asking for modification name. I gave the message class name as modification name. The long text message is maintained in EN lang.
I have to translate this message into DE which I tried to do with SE63 transaction
(Long Text->Other Documentation-> Message Documentation) . But the changes done in SE91 does not appear in SE63 screen. The old long text message (both source and target )appears with some Docu comments .
But when I execute the program by logging in EN lang, the long text message appears with the recent changes . But in DE the long text message is blanks.
Please do let me know why discrepancy exists in the long text message shown in SE91 and SE63 transaction. Please advise what must be done to make the changes appear in SE63 transaction and Text translation.
Thank You.hi,
If you are looking for the translations for the text-symbols and selection texts used in your program, you need not require to use Transaction SE63. Instead you can do this in SE38 (or SE80)itself.
For getting the translations in DE version, you need to maintain the corresponding DE version of text-symbols and selection texts in the EN version of the program.
for example, to maintain text elements in both versions, you can follow the steps mentioned below:
STEP1: in EN version, from the ABAP editor, GOTO->SELECTION TEXTS->TEXT ELEMENTS navigating from the menu bar.
STEP2: Select a particular text element and navigate as GOTO->TRANSLATION
STEP3: Now you get a popup, asking for source language and target language
STEP4: Choose DE as target lang and EN as source lang; press enter
STEP5: Now you are in a new screen, where you need to enter the DE text just below the EN Text appears
STEP6: Save and comeback; activate the program
STEP7: login in DE lang and see the difference
You can follow the above steps, for any selection texts, list headings or
text symbols in the program
regards,
keerthi -
Display GL long text in FAGLL03
Hi Experts,
When running FAGLL03 with many GLs, we are unable to view the description of the GL.
Any idea how can we display GL long text in FAGLL03?
Any suggestion will be most grateful.
Thanks in advance.
Regards,
WongHi Wong,
Do you mean to say that you don't seem to see the G/L account Long text appearing in the first tab in your G/L account?
If yes then this has to do something with the Screen 2101. There might be some Screen Exit for the transaction FSP0 where this can be controlled. In an ideal case this will not happen.
Account Group controls the Field Status of the G/L master record and there is a Transaction based field status as well for Create, Change and Display (Define Screen Layout for each transaction).
Regards,
Jams
Maybe you are looking for
-
How can I uninstall mozilla from my computer I can not do it from my uninstall program
When I signed on to my computer Mozilla Fire Fox will not come up therefore not able to get into my favorites or anything. I do not know what happened and I can not uninstall from my computer and need to get it off so hopefully I can reinstall and ge
-
Anyone has a clue why this happens or how to fix it? Is it just that Spectrasonics hasn't released a software update for Mavericks yet or could it be something else?
-
Installing LR 4 on a new computer
I was sent the link to reinstall LR. I clicked on the link, clicked on LR 4.4.1 it went through "installing", and says that installing is complete. I know have the Lr icon on my desktop. When I click on it Lr 5 box comes up with a icon of a carboar
-
[SOLVED]Special characters not working on terminal
Hi everybody, my problem here is that when i log in from tty i can see characters like áéíóúñ and so, but when i start a terminal in E17, i can't see them. I just see diamonds with ? or just the ?. Here's my output of locale and locale -a Yes, Master
-
Attaching segment to Message type.
Hello , How are segments attached to a Message type. I want to know the step wise process if any as i am a novice in this field. Regards, Vinod Kapote.