Display of roles missing in BEx dialog box

Hi Experts!
I am facing an issue with BEx:
We just upgraded to Support Package 18 and afterwards all roles in the BEx dialog boxes are missing. Before upgrading everything was fine.
If we assign SAP_ALL to local users, they are able to see roles, but if we don't, they don't even see their assigned roles.
I searched the OSS and SDN but couldn't find an answer to that problem.
Any suggenstions?
Thanks in advance!
Inga

Hi
Recheck the same at PFCG / SUIM for the Authorization may be they must be recheck/save/reactiavte with SAP_NEW - All new authorization objects added during an upgradation??
Basis team can help you in this
Hope it helps

Similar Messages

No display of error message log in dialog box

Dear MM Experts,
During enter incoming invoice (MIRO), when we click simulate after entering all necessary data, all error & warning messages are displayed in a dialog box if there is red traffic light. In our case despite red traffic light error messages are not displayed as shown in below screen shot. Only warning messages are displayed & document canu2019t be posted. Please let me know if anyone has encountered such behavior & knows the solution. We just want to see the error messages in dialog boxes so that necessary data can be entered and document can be posted.
Additional information: 1. No GR needs to be done, 2. GR based IV is unchecked in PO, 3. No validation is active for the company code,
Thanks & regards,
Avinash

Hi,
Thanks for your response.
Our problem is not to post a particular invoice doument, the main problem is that error log is not displayed in MIRO. For example if balance is not zero then this error should be displayed in error log dialog box, which is not happening due to which we are not able to post any invoice document as error is not known to the user. Please let me know if any suggestions.
Additional information: We have deactivated all validations & BADis. We also tried to compare with other systems where error log is displayed properly however our ABAP consultant could not find any difference. Any Input on how to compare is also welcome.
Thanks & best regards,
Avinash

HT6065 Fixing file display speed in save and open dialog boxes

Has anyone else had issues with the speed at which a folder's contents are listed in a save dialog box? I will select a folder when saving a file and it will take 10-12 seconds of the spinning cog before it displays the list of files. Folder contents inside of that display their contents when clicked on right away but the first level selected is always very slow. It was fine in OS 10.8. I did a clean install of OS 10.9.

Has anyone else had issues with the speed at which a folder's contents are listed in a save dialog box? I will select a folder when saving a file and it will take 10-12 seconds of the spinning cog before it displays the list of files. Folder contents inside of that display their contents when clicked on right away but the first level selected is always very slow. It was fine in OS 10.8. I did a clean install of OS 10.9.

Display multiple roles like in BEX browser onto the Portal

Hi All,
What is the best way to display BW roles onto the Portal.
Thanks,
Tom

Hi Patricio,
In the backend BW system, there are BW roles assigned for each user. When I go to the BEX browser, I see these BW roles that contains queries and workbooks. Now how do I display these BW roles onto the portal.
Thanks,
Tom

Missing Remote Desktop Dialog Box in System Properties Running Under Windows 7 Ultimate SP1 But I Can Still See Remote Assistance Dialog Box

Hello to everyone i am using Win 7 Ultimate SP 1 and when i go to system properties -> remote settings all i get is the remote assistance dialog box and i can't find the remote desktop dialog box. I can see the remote assistance dialog box but i
can't see at all my remote desktop dialog box. Does anyone has any idea???????
i have tried almost anything. I have opened exceptions in windows firewall for remote desktop. I started the remote desktop services manually but nothing happend, i still can't see the remote desktop dialog box and that's odd because i can see my remote
assistance dialog box in system properties-> under the remote tab but as i said i can not see my remote desktop settings.
Plz help.....
Thanks in advance!

Hi,
First, please try the SFC command to check if you any corrupted system files:
How to use the System File Checker tool to troubleshoot missing or corrupted system files on Windows Vista or on
Windows 7
If this issue persists, it is recommended to perform system restore to get back to a previous time point to check what the result is:
System Restore - Windows 7 features - Microsoft Windows
Hope it helps.
Alex Zhao
Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread.

Flash CS3 - Missing Fonts Alert Dialog box not showing

We seem to have lost the Alert dialog box when Flash CS3 Pro
discovers there are missing fonts in a file. We still get the
warning in the Output box but we get no Alert box to tells us
actually which fonts we need to locate. This is happening
regardless of file so it appears to be Flash issue and not a file
issue.
Anyone come across this before and anyone know how to fix?

You need to make sure that the specific camera model is supported by the version of the ACR plug-in you have installed on your machine.
The current version of ACR (Adobe Camera Raw) is ACR 4.5 and there is also ACR 4.6beta.
What version are you running and what camera generated your raw files?

Missing Camera Raw Dialog Box in Photoshop Elements 8 for Windows.

Hello,
I have Photoshop Elements 8 for Windows. This runs on a 32-bit Windows Vista VirtualBox virtual machine.
It has been running fine, but suddenly opening raw Nikon images no longer opens the Camera Raw Dialog box, but takes me straight into editing on Photoshop Elements.
I really like having the Camera Raw Dialog box open as I do most of my image processing using this before opening the resulting file in Elements.
Does anyone know how to get this box back, or to open it from within Elements?
I have tried opening the images from within Photoshop Elements using the "Open As..." mnu item from the File menu, and the selecting "Camera Raw" as the image type, but it still opens without the Camera Raw Dialog box.
Thanks very much.

Check your screen resolution settings for vista.
I believe the screen resolution needs to be at least 1024 x 768 for the camera raw dialog to show in pse 8.
For example, if instead of running VirtualBox full screen, your running it in windowed or seamless mode and made the window smaller by dragging on the corner, that would automatically lessen the screen resolution in vista.

Problem with Indesign CS3 missing save as dialog box

I am having problems saving documents with Indesign CS3. I have upgraded it to the latest version, repaired permissions, shut down a restarted to no avail. This is Indesign CS3 running on a Macbook under Leopard 10.5.2. You can select save and it appears to save a file. However, if you select "save as", the dialog box to select a location never comes up. Nothing seems to happen. I can't figure it out, and it happens to any file. I have created test files and the same thing happens.
Help!!!

Trash preferences before re-installing. Also, try this weird procedure: open the equivalent dialog in one of the other Suite products on the same computer (assuming they're there). That's been known to solve the problem on Windows machines.
Dave

Custom paper size button missing on print dialog box

I installed the print driver for our new Z5200ps printer on four machines--all with no issues. I installed it on the fifth PC, and when the user tried to print from Illustrator and Photoshop, neither print dialog box had the custom paper button as all the other machines do. I deleted the printer and reinstalled--still no luck. Am using the latest driver. We're all running Windows 7, 64 bit. Thanks for any help!

On december 28, 2008 I uninstalled Adobe Reader 8 and subsequently
installed Adobe Reader 9...assuming it to be an upgrade. The print
format box is completely worthless in content, and above all, it
does offer a "print" option. You are totally unable to print zny-
thing. Why is the print option (command) not included. Is this an
overlooked error.
Whar process do I use to reinstall Adobe Reader 8 and uninstall
Adobe Reader 9. I am using Windows Vista Home Basic and have never
had a problem using Adobe Reader 8.
I would appreciete whatever help anyone can offer.
Billie Holmes

Why are "Save As" choices missing from AppleWorks dialog box?

We have two computers: a MacBook Pro running Mac OS X 10.4.11 and an iMac running Mac OS X 10.5.8. Both have AppleWorks 6.2.9 application installed. Recently it was noted (that is to say I'm not sure this has always been the case) that the "Save As" choices in the pop-up menus are not the same. The MacBook includes "ASCII text" for database and spreadsheet documents and "HTML", "RTF" and "text" for word processing documents. The iMac does not show these choices. The translators (in Applications:AppleWorks 6:AppleWorks Essentials:Translators) appear to be identical. Where else might I look and what might I try to do to add the missing choices to the iMac, or is this just not possible for some reason?

When weird things happens in an application start some maintenance like delete the Appleworks preferences in User > Library >Preferences > AppleWorks and also delete from the Preferences folder the com.apple.appleworks.plist file

How to display image using from open dialog box?

I've developed a program that can display image by named the file that I want to display in my program.
But how can I display an image from an Open Dialog Box?
I attch here with my program.
import java.io.*;
import java.awt.*;
import java.awt.event.*;
import javax.swing.*;
import javax.swing.event.*;
import javax.swing.filechooser.*;
public class SuDisplayTool6 extends JFrame implements InternalFrameListener,ActionListener
JTextArea display1;
JDesktopPane desktop;
JInternalFrame displayWindow;
JInternalFrame listenedToWindow;
static final String SHOW = "Show Image";
static final int desktopWidth = 800;
static final int desktopHeight = 600;
private static final int kControlX = 88 ;
private DrawingPanel panel;
public SuDisplayTool6(String title)
super("Internal Frame");
desktop = new JDesktopPane();
desktop.putClientProperty("JDesktopPane.dragMode","outline");
desktop.setPreferredSize(new Dimension(desktopWidth, desktopHeight));
setContentPane(desktop);
addMenu();
createDisplayWindow();
desktop.add(displayWindow);
Dimension displaySize = displayWindow.getSize();
displayWindow.setSize(desktopWidth, displaySize.height);
protected void createDisplayWindow()
JButton b1 = new JButton("Show Image");
b1.setActionCommand(SHOW);
b1.addActionListener(this);
display1 = new JTextArea(3,30);
display1.setEditable(false);
JScrollPane textScroller = new JScrollPane(display1);
textScroller.setPreferredSize(new Dimension(200,75));
textScroller.setMinimumSize(new Dimension(10,10));
displayWindow = new JInternalFrame("Header Graph",true,false,true,true);
JPanel contentPane = new JPanel();
contentPane.setBorder(BorderFactory.createEmptyBorder(10,10,10,10));
contentPane.setLayout(new BoxLayout(contentPane, BoxLayout.Y_AXIS));
contentPane.add(Box.createRigidArea(new Dimension(0,5)));
contentPane.add(textScroller);
b1.setAlignmentX(CENTER_ALIGNMENT);
contentPane.add(b1);
displayWindow.setContentPane(contentPane);
displayWindow.pack();
displayWindow.show();
protected void createListenedToWindow()
listenedToWindow = new JInternalFrame("Image",true,true,true,true);
listenedToWindow.setDefaultCloseOperation(WindowConstants.DISPOSE_ON_CLOSE);
listenedToWindow.setSize(800,450);
panel = new DrawingPanel();
listenedToWindow.setContentPane(panel);
public void internalFrameClosing(InternalFrameEvent e)
public void internalFrameClosed(InternalFrameEvent e)
listenedToWindow = null;
public void internalFrameOpened(InternalFrameEvent e)
public void internalFrameIconified(InternalFrameEvent e)
public void internalFrameDeiconified(InternalFrameEvent e)
public void internalFrameActivated(InternalFrameEvent e)
public void internalFrameDeactivated(InternalFrameEvent e)
public void actionPerformed(ActionEvent e)
if (e.getActionCommand().equals(SHOW))
if (listenedToWindow == null)
createListenedToWindow();
listenedToWindow.addInternalFrameListener(this);
desktop.add(listenedToWindow);
listenedToWindow.setLocation(desktopWidth/2 - listenedToWindow.getWidth()/2,
desktopHeight - listenedToWindow.getHeight());
listenedToWindow.show();
else
public static void main(String[] args)
JFrame frame = new SuDisplayTool6("Su Display Tool");
frame.addWindowListener(new WindowAdapter()
public void windowClosing(WindowEvent e)
System.exit(0);
frame.pack();
frame.setVisible(true);
private void addMenu()
JMenuBar menuBar;
JMenu menu, submenu;
JMenuItem menuItem;
final JFileChooser fc = new JFileChooser();
fc.addChoosableFileFilter(new ImageFilter());
menuBar = new JMenuBar();
setJMenuBar(menuBar);
menu = new JMenu("File");
menuBar.add(menu);
menuItem = new JMenuItem("Open...");
menu.add(menuItem).addActionListener(new ActionListener()
public void actionPerformed(ActionEvent e)
int returnVal = fc.showOpenDialog(SuDisplayTool6.this);
menuItem = new JMenuItem("Save");
menu.add(menuItem);
menuItem = new JMenuItem("Save As...");
menu.add(menuItem).addActionListener(new ActionListener()
public void actionPerformed(ActionEvent e)
int returnVal = fc.showSaveDialog(SuDisplayTool6.this);
menuItem = new JMenuItem("Close");
menu.add(menuItem);
menu.addSeparator();
menuItem = new JMenuItem("Exit");
menu.add(menuItem).addActionListener(new WindowHandler());
menu = new JMenu("Edit");
menuBar.add(menu);
menu = new JMenu("View");
menuBar.add(menu);
menuItem = new JMenuItem("Zoom In");
menu.add(menuItem);
menuItem = new JMenuItem("Zoom Out");
menu.add(menuItem);
menu.addSeparator();
submenu = new JMenu("Header");
menuItem = new JMenuItem("CDPX");
submenu.add(menuItem);
menuItem = new JMenuItem("SX");
submenu.add(menuItem);
menuItem = new JMenuItem("CX");
submenu.add(menuItem);
menu.add(submenu);
menu = new JMenu("Help");
menuBar.add(menu);
menuItem = new JMenuItem("About");
menu.add(menuItem).addActionListener(new WindowHandler());
private class WindowHandler extends WindowAdapter implements ActionListener
public void windowClosing(WindowEvent e)
System.exit(0);
public void actionPerformed(ActionEvent e)
if(e.getActionCommand().equalsIgnoreCase("exit"))
System.exit(0);
else if(e.getActionCommand().equalsIgnoreCase("About"))
JOptionPane.showMessageDialog(null,"This program is written by Nenny Ruthfalydia.","About",JOptionPane.PLAIN_MESSAGE);
class DrawingPanel extends Panel
final ImageIcon imageIcon = new ImageIcon("image8.jpg");
Image image = imageIcon.getImage();
public void paint (Graphics g)
g.drawImage(image, 10, 10, this);

so much wrong with this post...
a) use the code tags to format the code. Now it is an unreadable mess
b) scriptlets in your JSP. I don't even want to look at that mess. Learn how to combine servlets and JSPs to create clean, readable and maintainable code in which view logic and business logic are separated. The rule: no java code in your JSP, only tags and EL expressions (learn about JSTL).
So you get a blank screen. When you do "view source" in your browser, do you see anything there? If nothing, check if you are behind a proxy server. The solution to a post of not too long ago was that the blank screen was being caused by faulty proxy server settings (the user figured it out himself, I don't know what was done to solve it).
If all this fails you will have to do some debugging magic using your favorite IDE. It will probably be something stupid you are overlooking in the code. It is annoying, but debugging code that does not work is a big part of your job. Better get good at it.

Save Dialog Box

Apparently I am in the extreme minority, but I really do miss the save dialog box when saving attachments in Mail. Is there anyway to kill off the automatic saving to the Downloads folder? And no I am not interested in merely moving the default from automatically saving all attachments to Downloads to automatically saving to some other folder.
I maintain some 2000 plus clients and multiple projects for each client on my hard-drive. Each client and project is set up in hierarchical folders. I have been too busy recently to go through the Downloads folder and move the downloaded attachments to the proper client and project folders so my Downloads folder built up a sizable backlog. After spending more than two hours just moving files from Downloads to the folders where they are supposed to be I have finally reached my breaking point.
Prior to the creation of the Downloads folder Mail would offer you a save dialog box like most other programs and you could navigate to where you wanted particular files saved. Is this just impossible to do in the current incarnation?
I am almost positive this is not something that can be fixed through the standard preferences dialog box, but I am hopeful that it may be one of those things that can be edited in the plist file. Any ideas?

The Downloads folder defined in Mail/Prefs/General is just to temporarily store decoded attachments.
The Save dialog is available by pressing *and holding* the Save lozenge button next to the attachment(s) in the message header header, or right-clicking/save attachment on files visible in the message body.
(Having to click and hold the save button to get something useful is extremely bizarre, and IMO broken)
You can also drag and drop items from the message to a Finder window or whatever.

Multiple screens & Excel dialog box placement

I'm using multiple screens with my 13" Retina Macbook Pro, and what is really annoying is that Excel places it's dialog boxes in a strange location where I cannot action them or move them.
Does anyone have an idea on how to tell Excel to ignore the other displays and just show me the dialog boxes on the screen/desktop that has the application on? Going to fullscreen or moving the windows to any other displays didnt make any difference; dialog box remains the same

On Wed, 14 Dec 2011 20:51:03 +0000, Nootrino wrote:
>
>
>Recently upgraded to Office 2010 (32bit) /Windows 7. Have hundreds of users that we support and so far most have upgraded. Noticed with some users though - not all - just a small percentage, when they click SaveAs in Excel 2010, the application
freezes. On closer scrutiny we realized what was happening was the SaveAs dialog box was BEHIND the main Excel window. The only way to restore it is to click on the tab from the Taskbar or minimize all the windows to FIND the SaveAs Dialog box.
Understandably this is causing these users stress and inconvenience. It is very unproductive and a nuisance to say the least. The only other variable here is that all these users have multiple monitors, usually 2-4. But for some, this happens
in their main monitor and/or the monitor that Excel is opened in and which has the focus. Even more strange is that this does not occur to everyone, just a handful of users so far who have reported the issue. We have also noted it happens with
other
>dialog boxes as well, not just the SaveAs so it seems generic in that sense.
>
>The other item with this issue is that it's not persistent. Users have reported it's sporadic and comes and goes.
>
>Is this a bug?
>
>Any feedback greatly appreciated.
A search using Google reveals that this may be a problem with W7, and was first reported during beta testing!
http://social.technet.microsoft.com/Forums/en/w7itprogeneral/thread/0bbefdc5-7f20-4b9f-8b24-1be76d6b7996
and for a possible fix, but with some serious caveats:
http://social.technet.microsoft.com/Forums/en-US/w7itproui/thread/7f4543cf-874d-4a39-bea5-34a824e4c0ce/
Ron

Labview runs in front of dialog box from third party .exe - cannot simulate keyboard input

Hello,
I need to use an external software to set some parameters of an actuator. When I run this software from Labview (using System Exec.VI) it opens a screen while loading and then a dialog box. I need to select something from this dialog box (I am using a keyboard simulator). But just after the dialog box appears, Labview's window comes in front of it and then all the keyboard commands end up in the Labview's window instead of the external dialog box.
Has anyone ever had a similar problem? I have been looking aroung and I could not find a solution. I cannot use the ALT+TAB or anything like that because dialog boxes do not appear there (something of "modal" and "non-modal" windows).
I came up with a very unreliable solution by chance: If I hit (actually simulate) one key while the loading screen is on and before the dialog box appears, then the dialog box stays upfront. I think it is like telling the Labview "do not come to the front, I want to stay working in this other window". I do not trust this temporary solution at all but maybe it triggers an idea for a solution.
Please see the attached image: After I hit the RUN button, my exe is called and the "loading" screen is displayed on front. Then, the dialog box is left behind the Labview interface.
Any ideas are welcome!!
Thanks,
Laura

Hi Wayne,
I believe it is a good idea to use Portmon, I will give it a try hopefully today.
I have attached the two manuals that can be downloaded from the actuator's webpage (http://www.miraiintertech.com). Then I have attached the manual of the software (I cannot attached the software because they sell it); check on page 24: CTA-1EX, that's the software I am using.
Isn't it weird that there is little info about the dialog box thing? I would have thought that many people had this issue.
Thanks for the help!
Laura
Attachments:
EE06426I.pdf ‏1094 KB
TMBSCOM.pdf ‏319 KB
TBVST-Manual2009.pdf ‏4482 KB

Unable to close Modal dialog box

Hello Friends,
I am displaying a list in a Modal Dialog box. When I try to close the Modal dialog box. It is not getting closed.I have defined a gui status for this modal dialog box. PBO and PAI Coding is given below .
module STATUS_0300 output.
SET PF-STATUS 'STATUS_300'.
SUPPRESS DIALOG.
LEAVE TO LIST-PROCESSING AND RETURN TO SCREEN 0 .
IF p_week IS NOT INITIAL.
    WRITE : text-009 COLOR 1.
ENDIF.
IF p_month IS NOT INITIAL.
    WRITE : text-010 COLOR 1.
ENDIF.
LOOP AT g_t_wkmon_error INTO g_s_wkmon_error.
    WRITE :/ g_s_wkmon_error-matnr,
             g_s_wkmon_error-period,
             g_s_wkmon_error-quantity.
ENDLOOP.
LEAVE SCREEN.
endmodule.
module USER_COMMAND_0300 input.
CASE ok_code.
WHEN 'OK'.
   LEAVE PROGRAM.
ENDCASE.
endmodule.
Thanks in Advance.
Hari

Hi,
Check the below thread
Re: Unable to close modal dialog box
" Make sure you select the Radio Button DIalog BOX Typ while creating the Status in PBO
You can use SET SCREEN 0 In the above Thread
MODULE user_command_0100 INPUT.
CASE ok.
    when 'CANCEL'. " You Standard GUI options shown in The GUI Screen
      SET SCREEN 0.
ENDCASE.
ENDMODULE.                 " USER_COMMAND_0100 INPUT
module STATUS_0100 output.
SET PF-STATUS 'ABC'. " This is of type Dailog Box type
* SET TITLEBAR 'xxx'.
endmodule.                 " STATUS_0100 OUTPUT
Hope this would resolve your Issue.
Cheerz
Ram
Edited by: Ramchander Krishnamraju on Apr 16, 2010 1:16 PM

Display of roles missing in BEx dialog box

Similar Messages

Maybe you are looking for