Display of serial number in the report

Hi experts,
I wanted the serial number in my report based on plant .I am getting it based on my sub divisions of plant .Also i wanted this column as the first while dispplayed in the re[port.
can anyone please suggest me a solution for this issue?

thanks syed but i want a new column in my report level based upon the plant like
1. aaa
2.bbb
but i get it based on the subgroup like
aaa asdf 1
         dfgh 2
         hjkl    3
bbb   asdf 1
         dfgh 2
         hjkl    3
the correct output what iam looking for is
1.aaa asdf 1
           dfgh 2
             hjkl    3
2.bbb   asdf 1
           dfgh 2
            hjkl    3

Similar Messages

Add serial number in the report file name when using batch process model

I would like to append a string containing the current UUT serial number to the base name of the report file. For example, uut_report.html becomes uut_report[SN000001].html. This setting is not available if I use NI BatchModel.seq as my process model.
Thanks!
Jacky

duplicate post
Ask your question only once.

How to add Serial Number to the report name?

HI,
I'd like to add the option of including the SN to the report name. A good option will be to automatically set the default base name to the SN.
I'm open to suggestions. Either a simple solution where I'll always get the SN as the base name, or
a more complicated solution where I can really make some modifications to the report option dialog page to include that upon user selection.
Thanks
Rafi
TS3.5+CVI8.0
p.s. an example, if exist, will be highly useful (and appreciated of course)

That's okay... I can answer here as well...
Under Configure >> Report Option
UNSELECT "Store UUT Report in Batch Report File" first, then select "New UUT Report File for Each UUT"
New UUT Report File for Each UUT—Appends a string containing the current UUT serial number to the base name of the report file. For example, uut_report.html becomes uut_report[SN000001].html. This setting is not available if you select Store UUT Report in Batch Report File.

Displaying serial number in the report output

Hi everyone
may i know hw can we display serial number inthe report output.

hi,
Assuming that you wanted to print the entries of internal table record by record ... do this way ...
loop at itab.
write : sy-tabix. " Record Position
endloop.
Regards,
Santosh

Is it possible to enter a serial number in the main sequence, instead of in the "Pre UUT"?

Hello!
Is it possible to enter a serial number in the main sequence, instead of in the "Pre UUT"?
I still want the serial number in the Report.
I also want the serial number as file name of the report.

You can enter the serial number in the main sequence instead ot the "Pre UUT" but there is no reason to do that.
if you still like to input serial number in your sequence You will need to make sure that you update the variable in the process model which stores the serial number ie. RunState.Caller.Locals.UUT.SerialNumber
This is used to generate the report.
the report can also contain the serial number of the uut if you select "New file for Each UUT" under Configure-Report options and in the "Report File name path"
The format of the name of the report will be
[123].txt
"123" was the serial number which I entered.
If you are not happy about the name of the file you can replace Locals.ReportFilePath to contain the right name using a statement step in the process mode
l. If you using the default process model please make sure that you add the statement step after "Determine Report File Path" step in the Process Model.

My ipod touch was stolen and I need the serial number for the police report how can i recover it

my ipod touch was stolen and i need the serial number for the police report how can i get that

- iOS: How to find the serial number, IMEI, MEID, CDN, and ICCID number

My ipad was stolen this morning. what steps should i take? I am filing a police report; does Verizon have the serial number of the ipad that I purchased through them? I have total moble protection; how do I file a claim?

My ipad was stolen this morning; can Verizon track the location of the device an assist the police department in recovering the device? I am filing a police report does Verizon have the serial number of the device for me to include in the police report? I have Total Mobile Protection and need instructions for filing a claim. Is here any other steps I should take?

If the iPad was running iOS 7, the thief/finder will not ever be able to use it.
iCloud: Find My iPhone Activation Lock in iOS 7
http://support.apple.com/kb/HT5818
Apple (and no one else) can not assist (with serial number or iCloud) in finding a lost or stolen iPad.
Report to police along with serial number. Change all your passwords.
These links may be helpful.
How to Track and Report Stolen iPad
http://www.ipadastic.com/tutorials/how-to-track-and-report-stolen-ipad
Reporting a lost or stolen Apple product
http://support.apple.com/kb/ht2526
What to do if your iOS device is lost or stolen
http://support.apple.com/kb/HT5668
iCloud: Locate your device on a map
http://support.apple.com/kb/PH2698
iCloud: Lost Mode - Lock and Trace
http://support.apple.com/kb/PH2700
iCloud: Remotely Erase your device
http://support.apple.com/kb/PH2701
Report Stolen iPad Tips and iPad Theft Prevention
http://www.stolen-property.com/report-stolen-ipad.php
General steps to follow for a Stolen iPad
http://stolen-ipad.com/
How to recover a lost or stolen iPad
http://ipadhelp.com/ipad-help/how-to-recover-a-lost-or-stolen-ipad/
How to Find a Stolen iPad
http://www.ehow.com/how_7586429_stolen-ipad.html
What NOT to do if your iPhone or iPad is lost or stolen
http://www.tomahaiku.com/what-not-to-do-if-your-iphone-or-ipad-lost-or-stolen/
Apple Product Lost or Stolen
http://sites.google.com/site/appleclubfhs/support/advice-and-articles/lost-or-st Len
Oops! iForgot My New iPad On the Plane; Now What?
http://online.wsj.com/article/SB10001424052702303459004577362194012634000.html
If you don't know your lost/stolen iPad's serial number, use the instructions below. The S/N is also on the iPad's box.
How to Find Your iPad Serial Number
http://www.ipadastic.com/tutorials/how-to-find-your-ipad-serial-number
iOS: How to find the serial number, IMEI, MEID, CDN, and ICCID number
http://support.apple.com/kb/HT4061
 Cheers, Tom

"lost" my iPad. Will the GPS still work after battery dies? Also, how can I get the serial number for police report?

Please help! I "lost" my iPad at a local store. The GPS on my phone shows the iPad is still in the store (over 24 hours.) I've searched every square inch of the store and cannot find it. I fear it may have been "stashed" by an employee. The police need a serial number for a report. How do I get that? Will I still be able to locate it via GPS after the battery dies?

Did you register it with Apple? If not, you would have had to write it down. Once the device goes out of wifi or if the thief turns wifi off...its gone. All they have to do is restore it as new, you wont be able to detect it again. Sounds bleak I know but its hard to get it back once its gone...no matter what Apple says.
I really hope it turns up...I hate thiefs. Best of luck.

How can i check the original led display parts serial number on my macbook white

How can i check the original led display parts serial number on my macbook white based on my mabook serial number?
and if i have defective lcd (no display and lcd flex removed) How can i use an external Monitor using display port, What is the possible problem that even i connect my Monitor using mini display port to vga adaptor it has no display.

Have tried 3 new dvd's same responce. On the MacBook, when new DVD was put in the drive, it showed in on the desktop so files could be moved across by right click and move, now its a file DVD.fpbf and after I moved a movie to burn I got error code 0x80020063?

I want to change serial number in the Batch report and in the special UUT report

I use Batch Model, sequential mode.
I want to change serial number in the Batch report and I want to change UUT serial number in each TestSocket report.
I overrided ModifyReportHeader, I did
Parameters.UUT.SerialNumber = "....."
but the serial number changed only in the Batch Report, not in UUT Report. How can I change serial number in UUT Report too?

Marta,
There is actually a ModifyBatchReportHeader in addition to the ModifyReportHeader that you already used. That would be the first thing to do.
After that, I think I need a more detailed description of what you are trying to do (perhaps with screenshots) in order to be able to help effectively.
Josh W. | National Instruments | Applications Engineering
Josh W.
Certified TestStand Architect
Formerly blue

Displaying the Row and Column number in the report

I am trying to show row and column number in the report (not just web preview). I am using Hyperion Reports Version 7.2.5.168

use a formula column/row. use RANK function in that. (e.g. Rank([A], asc) will sort the rows based on column A values in ascending order)
you can use this rank in your heading.
But frankly this is not so easy. You have to do it in a very intelligent way, so that rank gives you column number/row number any how.
Have a try and let see if you find a appropriate solution.
Regards,
Rahul

I get an Invalid Certificate notice when I try to access my https site for my printer. The serial number is the same as used by another certificate. In IE I was able to proceed to this address, but Firefox won't give me that option

I get an Invalid Certificate notice when I try to access my https site for my printer. The serial number is the same as used by another certificate. In IE I was able to proceed to this address, but Firefox won't give me that option

Hello,
Thanks for contacting Mozilla Support!
Many site issues can be caused by corrupt cookies or cache. In order to try to fix these problems, the first step is to clear both cookies and the cache.
Note: ''This will temporarily log you out of all sites you're logged in to.''
To clear cache and cookies do the following:
#Go to Firefox > History > Clear recent history or (if no Firefox button is shown) go to Tools > Clear recent history.
#Under "Time range to clear", select "Everything".
#Now, click the arrow next to Details to toggle the Details list active.
#From the details list, check ''Cache'' and ''Cookies'' and uncheck everything else.
#Now click the ''Clear now'' button.
Further information can be found in the [[Clear your cache, history and other personal information in Firefox]] article.
Did this fix your problems? Please report back to us!
Thank you.

How Serial Number of the material can be used to track the current status

Hi,
I want to know how we can use the serial number of the materail to track its current status. i;e i just want to enter serial number and system should display its current status, whether the materail has been returned, delivered etc.
Is it possible to know.
Thanks,

VK,
We use serial numbers for tracking purpose. We can track at the document level
Function Module GET_SERNOS_OF_DOCUMENT can be used to retrieve serial numbers corresponding to any of the following documents.
1. Delivery
2. Sales order
3. Material document
4. Inspection lot
5. production order
6. Internal Handling unit
7. Physical Inventory document
TO see the status of Serial no. you can use Tcode IQ02 - Where the status will be To Stock , From Stock, To Customer, From Customer, Delete Assign to HU, Delete Inv Assign.
Regards
Sathya

Where is the Serial Number for the iPod shuffle (2nd Gen)?

I don't know where it is.
Message was edited by: Host

Go to this page: iPod Documentation and choose Option One "Upload the serial number of my last connected iPod". This will read iTunes and display the serial number of the last connected iPod.
You could also have a look at this page: iPod: How to find the serial number

HT4061 my phone is unable to power on and i dont have the packaging how can i check what is the serial number of the phone

my phone is unable to power on and i dont have the packaging how can i check what is the serial number of the phone

Apple (and no one else) can not assist (with serial number or iCloud) in finding a lost or stolen iPad.
Report to police along with serial number. Change all your passwords.
These links may be helpful.
How to Track and Report Stolen iPad
http://www.ipadastic.com/tutorials/how-to-track-and-report-stolen-ipad
Reporting a lost or stolen Apple product
http://support.apple.com/kb/ht2526
What to do if your iOS device is lost or stolen
http://support.apple.com/kb/HT5668
iCloud: Locate your device on a map
http://support.apple.com/kb/PH2698
iCloud: Lost Mode - Lock and Trace
http://support.apple.com/kb/PH2700
iCloud: Remotely Erase your device
http://support.apple.com/kb/PH2701
Report Stolen iPad Tips and iPad Theft Prevention
http://www.stolen-property.com/report-stolen-ipad.php
How to recover a lost or stolen iPad
http://ipadhelp.com/ipad-help/how-to-recover-a-lost-or-stolen-ipad/
How to Find a Stolen iPad
http://www.ehow.com/how_7586429_stolen-ipad.html
What NOT to do if your iPhone or iPad is lost or stolen
http://www.tomahaiku.com/what-not-to-do-if-your-iphone-or-ipad-lost-or-stolen/
Apple Product Lost or Stolen
http://sites.google.com/site/appleclubfhs/support/advice-and-articles/lost-or-st olen
Oops! iForgot My New iPad On the Plane; Now What?
http://online.wsj.com/article/SB10001424052702303459004577362194012634000.html
If you don't know your lost/stolen iPad's serial number, use the instructions below. The S/N is also on the iPad's box.
How to Find Your iPad Serial Number
http://www.ipadastic.com/tutorials/how-to-find-your-ipad-serial-number
iOS: How to find the serial number, IMEI, MEID, CDN, and ICCID number
http://support.apple.com/kb/HT4061
 Cheers, Tom

Display of serial number in the report

Similar Messages

Maybe you are looking for