Display only in Safe Mode
My Mac Pro seems to have developed a rather strange problem. When I boot up as normal the display never comes on. It only seems to work if I boot in safe mode. I've checked the leads and display on another computer and they work fine.
Any suggestions? I don't believe I've changed any settings recently some I'm not sure what the problem could be.
Many thanks
Regards
D
Thanks for the reply. Details below...
Hardware Overview:
Model Name: Mac Pro
Model Identifier: MacPro3,1
Processor Name: Quad-Core Intel Xeon
Processor Speed: 2.8 GHz
Number Of Processors: 2
Total Number Of Cores: 8
L2 Cache (per processor): 12 MB
Memory: 6 GB
Bus Speed: 1.6 GHz
Boot ROM Version: MP31.006C.B05
SMC Version (system): 1.25f4
ATI Radeon HD 2600 XT:
Chipset Model: ATI Radeon HD 2600
Type: Display
Bus: PCIe
Slot: Slot-4
PCIe Lane Width: x4
VRAM (Total): 256 MB
Vendor: ATI (0x1002)
Device ID: 0x9588
Revision ID: 0x0000
ROM Revision: 113-B1480A-252
EFI Driver Version: 01.00.252
I do have a clone of the System HD however setting that as the start up disk makes no difference either. I'm not sure what you mean about deleting the NVRAM path as I'm not overly sure where that is on the system.
Thanks again for you help!
D
Similar Messages
-
MacPro 1.1 boot only in safe mode with a non Apple display (NEC 24")
Months ago my original Apple Cinema has broken and I subtituted it with a 24" NEC Multisync LCD 2490WUXi with good results.
After some months, for cleaning purpose, I formatted the boot HD and reinstalled Snow Leopard.
Since then I can restart only in safe mode - the DVD also start only in safe mode otherwise after loading the screen is blank and shows only the mouse pointer.
I noted on System Profiler that no monitor is shown and both the DVI ports of the graphical card (NVIDIA Geforce 7300) result not connected!
I have to thing that such a monitor is not known and therefore, as I don't know where get the original one, can I use the Cinema Display 30" (but it has a minidisplay port not present on my card) and how?
Or it is better the substitution of the card having the minidisplay port? What type is compatible with Mac Pro 1.1 (2008)?
Or, in conclusion, I have to trash all and abandon Apple?
Many thanks for your appreciated suggestions.
Nerion7300GTs are old in the tooth, there is a Boot Camp related firmware update that you should have seen in ASU.
The ATI 4870 - even flashed PC version - is one option.
I have seen other threads mention 7300.
I'd do the power off unplugged / power button for 10 second "Reset SMC" and see.
http://support.apple.com/kb/HT1436?viewlocale=en_US -
Webpage displays correctly only in safe mode
A pop up window on ebay does not show correctly in Firefox. It shows correctly (fully displaying all information) in Safari and Chrome.
I reset Firefox, still same issue.
The weird thing is, it displays properly in Safe Mode.
I noticed that once the pop up window is open and if I scroll down to hide the pop up window either on top or the bottom of the screen, and then scroll back to display the popped up window, IT DISPLAYS ALL CONTENT PROPERLY!
If I only scroll up or down to hide HALF the popped up window, it will literally only show half the content that was hidden from view for a second and the rest of the content in the pop up window does not show ALL the contents.
I can't figure out what is causing this. There are no extensions installed. I tried disabling ALL the plug-ins. Same issue.
Any ideas what is causing this?If it works in Safe Mode and in normal mode with all extensions (Tools > Add-ons > Extensions) disabled then try to find which extension is causing it by enabling one extension at a time until the problem reappears.
Close and restart Firefox after each change via "Firefox > Exit" (Windows: Firefox/File > Exit; Mac: "Firefox > Quit Firefox"; Linux: "Firefox/File > Quit")
*https://support.mozilla.org/kb/Troubleshooting+extensions+and+themes
Make sure that you haven't enabled a High Contrast theme in the Windows/Mac Accessibility settings and that you allow pages to choose their colors in Firefox.
*Firefox > Preferences > Content : Fonts & Colors > Colors : [X] "Allow pages to choose their own colors, instead of my selections above"
See also:
*http://kb.mozillazine.org/Website_colors_are_wrong
*http://kb.mozillazine.org/Websites_look_wrong -
IMac 24" boots only in Safe mode
iMac Intel 24" aluminum 3.06 processor, Graphics NVIDIA 8800 GS,from June 2008. Mac OS 10.6.7
It started a few days ago by flickering the upper part of the screen(horizontal strips) during normal use. After reboot the problem reappeared. Ata certain moment the computer would not restart, it hangs at gray screen, butthe hard drive turns and eventually other computers in a wireless networkrecognize the printer connected to the computer.
I tried all usual tricks (starting from DVD or external drive, safemode, single mode, resetting PRAM, unplugging the power cord etc.).
The computer starts only in safe mode, the gray screen becomes blue andthen normal desktop picture. Only some pictures and YouTube videos are not showing up. Safari works only with a single tab, however Firefox opens nearlyall pages.
I took the machine to an Apple shop for repairing. After 11 days theycalled me and said the video card is damaged and should be replaced (some $800). I do not have Applecare and I have to pay the costs. Before agreeing toreplace the video card I would like to know what is the origin of the problem
I wonder why the video card failed. Is it possible that another element(power supply or overheating) has caused the damage to the card? If the videocard is damaged why is it able to handle graphics when the computer is startingin safe mode?Thank you very much.
In fact it is interesting to know if a video card can be partially dead. If it works (at least partially) at safe mode that means some components of the hardware are still alive. It seems that at starting in normal mode it tries to access something for activating the graphics and it cannot. Are there extra components activated at normal startup, which are not done at safe mode?
I unplugged the computer without holding the power button (At Apple store they didn’t tell me to hold the power button for 10 seconds after unplugging to reset SMC) - also Apple doesn’t suggest to hold the power button, see:
http://support.apple.com/kb/ht3964
I restarted the computer after resetting SMC and it started normally, but after nearly 24 hours the top of the display began to flicker followed by total freeze. After that it couldn't boot in normal mode. It hangs at startup with gray screen. Only in safe mode it can boot. -
My Macbook Pro won't boot up, only in safe mode!
Help, my macbook pro won't restart, only in safe mode! and it seems that safe mode has plenty of implications for use. my usb memory stick doesn't seem to be recognized while in safe mode. I was doing a cleanup on mackeeper just after I downloaded a trial version of microsoft office mac. The trial wouldn't work properly so I deleted it and decided to do a cleanup with mackeeper. than the mac froze while mackeeper was doing it's cleanup and the screen flashed black a few times. Ever since it won't boot up unless I use safe mode. Also, I downloaded the most recent updates while in safe mode but it doesn't seem to be recognizing that I already downloaded them because software update is still telling me that I have 6 updates. So I am horribly confused at this point. Please help, I need this laptop to do report cards (it's a good thing I got an extension). thanks
Please read this whole message before doing anything.
This procedure is a diagnostic test. It won’t solve your problem. Don’t be disappointed when you find that nothing has changed after you complete it.
Third-party system modifications are a common cause of usability problems. By a “system modification,” I mean software that affects the operation of other software — potentially for the worse. The following procedure will help identify which such modifications you've installed. Don’t be alarmed by the complexity of these instructions — they’re easy to carry out and won’t change anything on your Mac.
These steps are to be taken while booted in safe mode.
Below are instructions to enter some UNIX shell commands. The commands are harmless, but they must be entered exactly as given in order to work. If you have doubts about the safety of the procedure suggested here, search this site for other discussions in which it’s been followed without any report of ill effects.
The commands may line-wrap or scroll in your browser, but each one is really just a single line, all of which must be selected. You can accomplish this easily by triple-clicking anywhere in the line. The whole line will highlight, and you can then either copy or drag it. The headings “Step 1” and so on are not part of the commands.
Launch the Terminal application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
When you launch Terminal, a text window will open with a line already in it, ending either in a dollar sign (“$”) or a percent sign (“%”). If you get the percent sign, enter “sh” and press return. You should then get a new line ending in a dollar sign.
Step 1
Triple-click the line of text below to select it. Copy the selected text to the Clipboard (command-C). Then click anywhere in the Terminal window and paste (command-V).
find /Sy*/L*/Ex* -type f -name Info.plist -exec sh -c '/usr/libexec/PlistBuddy -c "Print :CFBundleIdentifier" "$1" 2> /dev/null | egrep -qv "apple|Accusys|ArcMSR|ATTO|CalDigit|HighPoint|hp-fax|JMicron|print|SoftRAID|stex" && echo ${1%*.kext/*}.kext' {} {} \;
Post the lines of output (if any) that appear below what you just entered (the text, please, not a screenshot.) You can omit the final line ending in “$”.
Step 2
Repeat with this line:
ls -1A /e*/mach* {,/}L*/{Ad,Compon,Ex,Fram,In,Keyb,La,Mail/Bu,P*P,Priv,Qu,Scripti,Servi,Spo,Sta}* L*/Fonts 2> /dev/null
Important: If you formerly synchronized with a MobileMe account, your me.com email address may appear in the output of the above command. If so, anonymize it before posting.
Step 3
osascript -e 'tell application "System Events" to get name of every login item' 2> /dev/null
Remember, these steps are all copy-and-paste — no typing. Also remember to post the output.
You can then quit Terminal. -
Powerbook G4 will not boot normally, only in safe mode.
So...about a month ago I updated my powerbook with all the updates that were available, one of the updates was 10.5.8. I came back after the update had run for a while, and found my computer with a black screen, and a faint white bar towards the bottom of the screen. The computer wouldn't respond, and I was forced to do a manual shutdown. The computer would then not boot, instead finally resting on a light blue screen with an active mouse pointer after passing the gray apple screen.
In safe mode, I downloaded and installed the combo 10.5.8 update, but it made no difference.
I assumed it to obviously be a software issue, and so I backed up my info, and reinstalled Leopard. I then updated to 10.5.8 using the combo update. My computer functioned normally for about a week, and then froze, mouse responsive, but nothing else. After manual shutdown, same problem, computer started to blue screen with pointer.
Since that time I've reset the PRAM, run disk utility a million times (no errors), repaired permissions, all to no avail. I've run the Techtool diagnostics on it, and it found no hardware failures. The computer will not boot from an external hard drive, ruling out the HD.
I've replaced the RAM with different RAM, again will not boot. The computer boots without fail every time in safe mode.
History on my computer, one of my memory slots failed to recognize memory any longer, and my logic board was replaced a little less than 2 years ago while I still had applecare.
So to sum up:
Powerbook boots only in safe mode
Stays at blue screen with mouse pointer when booting
May work properly for a few days after erase and install of OS, but then fails again with same systems shortly thereafter
Any ideas???Have you tried running the Apple Hardware Test from DVD?
-
Powerbook G4 only start safe mode
Hello i have powerbook g4 with cpu 1.25ghz. I use to have mac os4.1.1 installed. Lately had freexing problem and as it was a very old install i tried a fresch install. I downloed os as i lost my original dvd. Tried 10.4.3. Install go fine but never start when it finish. Only in safe mode will start. What could i check?please help
When there is a problem with an OS X, such as those usually installed from DVD system media
you would need to use the boot-able install-restore DVD (or later retail DVD, if not original grey
color label discs) to see about repairing the problem. You cannot update or upgrade to make a
problem go away. And an offer/download of a complete OS X system (torrent?) is not legal.
With an older computer, there is a fair chance the original hard disk drive may be failing; so that
is something to think about when you have an internal hard disk drive that spins thousands of
rotations per minute and gets written to & read from millions/billions of times a year....
The download update is only a minor step, and if you chose to download that from somewhere
other than the Software Update (via computer access to Apple Server) the actual one to seek
if everything was in great shape with your computer, would be the Combo 10.4.11 last update.
These steps are considered updates & not upgrades. The distinction is more than a word deep.
You will have to locate the correct DVD install media since a download from the internet of a
complete OS X Tiger 10.4 system is not available online; anything you may find very likely is
an illegal download and may be full of bogus content, such as malware or missing files, etc.
Apple no longer sells these discs, you may contact Apple sales support and have your product
serial number (PowerBook G4) available to ask an OS X specialist, if it is possible to get some
kind of operating system install DVD for that old a computer. The newest it could run would be
Leopard 10.5 (install from DVD, then download update to 10.5.8) however the Tiger 10.4 DVD
may be an expensive item if you look at Amazon or eBay sites online. Expect to pay...
You may have some luck if there happens to be an Apple User Group in your locality or if a
school or university has a computer lab and has not cleaned out their archive of old OS X.
School rummage sales, second hand shops, and other local finds are random luck events.
Good luck & happy computing! -
Boots only in Safe Mode - Macbook mid 2007
My Macbook mid 2007 with Snow Leopard will not boot correctly. The only successful means is Safe Mode (key S during boot).
All measures published in various postings have been conducted without any peripheral devices. These are:
verify harddisc
verify RAM
resetting PRAM and NVRAM
A detailled overview can be found under here.
The existing original RAM and harddisc were successfully tested using a second identical Macbook. A new installation of Snow Leopard on the harddisc using the second Macbook was successful and started in this second Macbook as expected. This harddisc was then inserted into my Macbook, but it would not boot. Hence it is safe to exclude problems with RAM and the harddisc.
Attempts to boot with the Snow Leopard DVD (either via C plus boot or Option during boot and select Install DVD) are not successful. Attempts to boot from an external drive are also not successful. The boot process (regular, DVD, external) progresses to different states including grey screen with Apple and frozen wheel. There is no consistency.
From the various postings I have found and studied along with my numerous tests, I have deduced the following possibilities:
There is a problem with the GPU.
There is a problem with the keyboard (maybe someone spilled something).
I have found numerous solutions for "boots only in Safe Mode". All include booting via Install DVD, but this does not work in my case.
I have exhausted all my possibilities. Hopefully someone can provide more insight.lruetimann wrote:
What I am not able to test is booting with an external CD/DVD drive. However, there is no indication that the built-in drive is malfunctioning.
If you have a second MacBook (#2 working OK), you could use its CD/DVD drive loaded with the 10.6 DVD as the target disk to boot into, as the first Macbook (#1 the troubled one) reportedly cannot see a 10.6 DVD normally.
How to use and troubleshoot FireWire target disk mode
In your case this would be:
With the MacBook(1) on (Host), the MacBook(2) off (Target) connect the firewire cable.
Start the MacBook(2), hold T key to make it the boot drive. It will appear on the MacBook's(1) Desktop.
Insert the 10.6 Install DVD into the MacBook(2).
It too will appear on the MacBook's(1) Desktop.
From the MacBook(1), select Restart and hold down the Option key to select Start-up Manager.
From Start-up Manager, select the 10.6 Install DVD which will take you into the installation.
If this occurs, then you have booted into the install 10.6 DVD, From there you could try and install it, see what happens.
However, if it does not see the DVD disk, then this would indicate a defect in the logicboard (motherboard), though which component I would not guess.
If it does see the DVD, in Macbook (2) and can boot into it,… I'd be surprised! -
Hey, I just installed ML on my OCZ Octane SSD, everything went ok, However, it got stuck while rebooting and now I can only see flashing question mark icon and ML won't boot at all. Only in safe mode...
It looks like ocz is aware of the issue and trying to address it via firmware:
http://www.ocztechnologyforum.com/forum/showthread.php?103700-Mountain-Lion-and- OCZ-Octane-Petrol-and-Octane-S2-SSD-s
It's a shame because apple is clearly the party that changed something. -
MacBook Pro will not boot, only in safe mode. Tried Everything!
My MacBook Pro was working fine yesterday. Went to boot it up today, and it freezes on the Apple grey boot screen, will not progress further.
It does however start in safe mode, but will not start normally.
I've tried everything I can find, reset the PRAM, reinstalled OS X, ran the Apple Hardware test which came back clear, I don't know what else to try and why it's not working. It's been fine until now. Please help! Thank youPlease read this whole message before doing anything.
This procedure is a diagnostic test. It won’t solve your problem. Don’t be disappointed when you find that nothing has changed after you complete it.
Third-party system modifications are a common cause of usability problems. By a “system modification,” I mean software that affects the operation of other software — potentially for the worse. The following procedure will help identify which such modifications you've installed. Don’t be alarmed by the complexity of these instructions — they’re easy to carry out and won’t change anything on your Mac.
These steps are to be taken while booted in safe mode.
Below are instructions to enter some UNIX shell commands. The commands are harmless, but they must be entered exactly as given in order to work. If you have doubts about the safety of the procedure suggested here, search this site for other discussions in which it’s been followed without any report of ill effects.
Some of the commands will line-wrap or scroll in your browser, but each one is really just a single line, all of which must be selected. You can accomplish this easily by triple-clicking anywhere in the line. The whole line will highlight, and you can then copy it. The headings “Step 1” and so on are not part of the commands.
Note: If you have more than one user account, Step 2 must be taken as an administrator. Ordinarily that would be the user created automatically when you booted the system for the first time. The other steps should be taken as the user who has the problem, if different. Most personal Macs have only one user, and in that case this paragraph doesn’t apply.
Launch the Terminal application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
When you launch Terminal, a text window will open with a line already in it, ending either in a dollar sign (“$”) or a percent sign (“%”). If you get the percent sign, enter “sh” and press return. You should then get a new line ending in a dollar sign.
Step 1
Triple-click the line of text below to select it:
for k in /Sy*/L*/Ex*/{,.?}*.kext; do test -f "$k/Contents/Info.plist" && /usr/libexec/PlistBuddy -c "Print :CFBundleIdentifier" "$_" | egrep -qv "apple|Accusys|ArcMSR|ATTO|CalDigit|HighPoint|hp-fax|JMicron|print|SoftRAID|stex" && echo $k; done | open -f -a TextEdit
Copy the selected text to the Clipboard by pressing the key combination command-C. Then click anywhere in the Terminal window and paste (command-V). A TextEdit window will open with the output of the command. Post the contents of that window, if any — the text, please, not a screenshot. You can then close the TextEdit window. The title of the window doesn't matter, and you don't need to post that. No typing is involved in this step.
Step 2
Repeat with this line:
sudo defaults read com.apple.loginwindow LoginHook | open -f -a TextEdit
This time you'll be prompted for your login password, which you do have to type. Nothing will be displayed when you type it. Type it carefully and then press return. You may get a one-time warning to be careful. Heed that warning, but don't post it. If you see a message that your username "is not in the sudoers file," then you're not logged in as an administrator.
Note: If you don’t have a login password, you’ll need to set one before taking this step. If that’s not possible, skip to the next step.
Step 3
Repeat with this line:
ls -1A /e*/mach* {,/}L*/{Ad,Compon,Ex,Fram,In,Keyb,La,Mail/Bu,P*P,Priv,Qu,Scripti,Servi,Spo,Sta}* L*/Fonts 2> /dev/null | open -f -a TextEdit
Important: If you formerly synchronized with a MobileMe account, your me.com email address may appear in the output of the above command. If so, anonymize it before posting.
Step 4
osascript -e 'tell application "System Events" to get name of every login item' 2> /dev/null | open -f -a TextEdit
Remember, Steps 1-4 are all copy-and-paste — no typing, except your password. Also remember to post the output.
You can then quit Terminal. -
No Internet, only in Safe Mode
Hello,
I have following Problem with my Mid 2011 iMac on Moutain Lion.
When i start at the normal Mode, Safari says it can't for i.e. connet to www.google.at ( this is for every webpage), non of my other programms can connect to the internet.
When i start the assisstant and a diagnostic, it says that everything is fine, "pc is connected to the internet", when i ping at www.google.at, it works everything is transmitted and received.
When i pull-out the ethernet or wifi and want to use safari, it recognizes, that there is no network and suggests my a diagnose, so my os recignizes a difference between "cant connect to internet" and "really isnt connected to internet".
I have the same settings since i bought my mac and everything was the same since then and started going insane since yesterday 4 pm.
At this moment i left my mac, but didnt shut down, before that i have done 2 things, my iphone was synced but went in auto-lock so wifi was deactivated and my itunes on mac didnt find it, so i released it inside of itunes and before that, got some error that my itunes cant find my iphone.
And i deleted my icloud account in mail.app because imap and smtp dindnt work since 22. Sept., i cant activate Mail in my iCloud Controlpannel, it says i have to setup mail in my mailapp, when i start add it in maillapp, it says imap and smtp server doesnt respond. But this is another problem, maybe?
So when i came back after i left my mac, since then osx cant connect to the internet, but has a connection, so it must be blocket, because pinging works.
So i tryed to delete Little Snitch 3, with Appcleaner but i still have the icon in my menubar, so some files maybe still are on my system maybe some of those which cause this error, i also deleted avast.
Another programm i have installed is GlimmerBlocker, the AppleSupport told my i have to try a clean delete of those 3 programms with maccleaner os x Firewall is not activated.
My question is, could there be another know issue cause this, where can i else look for the couse of that problem, could it be a malware?
Thank youPlease read this whole message before doing anything.
This procedure is a diagnostic test. It won’t solve your problem. Don’t be disappointed when you find that nothing has changed after you complete it.
Third-party system modifications are a common cause of usability problems. By a “system modification,” I mean software that affects the operation of other software — potentially for the worse. The following procedure will help identify which such modifications you've installed. Don’t be alarmed by the complexity of these instructions — they’re easy to carry out and won’t change anything on your Mac.
These steps are to be taken while booted in “normal” mode, not in safe mode. If you’re now running in safe mode, reboot as usual before continuing.
Below are instructions to enter some UNIX shell commands. The commands are harmless, but they must be entered exactly as given in order to work. If you have doubts about the safety of the procedure suggested here, search this site for other discussions in which it’s been followed without any report of ill effects.
Some of the commands will line-wrap or scroll in your browser, but each one is really just a single line, all of which must be selected. You can accomplish this easily by triple-clicking anywhere in the line. The whole line will highlight, and you can then either copy or drag it. The headings “Step 1” and so on are not part of the commands.
Note: If you have more than one user account, Step 2 must be taken as an administrator. Ordinarily that would be the user created automatically when you booted the system for the first time. The other steps should be taken as the user who has the problem, if different. Most personal Macs have only one user, and in that case this paragraph doesn’t apply.
Launch the Terminal application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
When you launch Terminal, a text window will open with a line already in it, ending either in a dollar sign (“$”) or a percent sign (“%”). If you get the percent sign, enter “sh” and press return. You should then get a new line ending in a dollar sign.
Step 1
Copy or drag — do not type — the line below into the Terminal window, then press return:
kextstat -kl | awk '!/com\.apple/{printf "%s %s\n", $6, $7}'
Post the lines of output (if any) that appear below what you just entered (the text, please, not a screenshot.) You can omit the final line ending in “$”.
Step 2
Repeat with this line:
sudo launchctl list | sed 1d | awk '!/0x|com\.(apple|openssh|vix)|edu\.mit|org\.(amavis|apache|cups|isc|ntp|postfix|x)/{print $3}'
This time, you'll be prompted for your login password, which won't be displayed when you type it. You may get a one-time warning not to screw up. You don't need to post the warning.
Note: If you don’t have a login password, you’ll need to set one before taking this step. If that’s not possible, skip to the next step.
Step 3
launchctl list | sed 1d | awk '!/0x|com\.apple|edu\.mit|org\.(x|openbsd)/{print $3}'
Step 4
ls -1A /e*/mach* {,/}L*/{Ad,Compon,Ex,Fram,In,Keyb,La,Mail/Bu,P*P,Priv,Qu,Scripti,Servi,Spo,Sta}* L*/Fonts 2> /dev/null
Important: If you formerly synchronized with a MobileMe account, your me.com email address may appear in the output of the above command. If so, anonymize it before posting.
Step 5
osascript -e 'tell application "System Events" to get name of every login item' 2> /dev/null
Remember, steps 1-5 are all drag-and-drop or copy-and-paste, whichever you prefer — no typing, except your password. Also remember to post the output.
You can then quit Terminal. -
OSX Lion running, but video display frozen. Safe mode hangs
When I started my Mac Pro (early 2008) this A.M. the video display froze (pin wheel stopped spinning), but OSX booted successfully (I could access shared drives from another computer on the network). I also noted a small black rectangle at the top left of the screen. I tried booting into safe mode, but it hung at about the 25% point as shown on the progress bar. The pinwheel was still spinning however. Power cycled the computer, but the results were the same. Did all of the above several times with the same results. I booted to a known good Super Duper clone, but it also failed. I'm guessing the video card has failed, but no way to verify this. Anything else I can try?
Referring again to the article, only Macs that shipped with 10.7 can run the AHT from the Internet. A 2008 Mac Pro would have shipped with 10.5. If you have a 10.4 disc, it came with an older Mac and won't work. If you can't find the Applications disc that came with the MP, then you can't run the AHT.
In that case, I suggest you try booting from the recovery partition. If you can do that, run Disk Utility, repair the startup volume, and reinstall Lion. Probably this won't help, but you will then have ruled out everything except a hardware failure, which is what I think you have. -
My MacBook Pro can be used only in Safe Mode
Dear gurus and hackers
My computer was working just fine before the last upgrades. Then in the last days something happened and now when I use my MacBook pro in normal mode the spinning beach ball cursor keep spinning and nothing I can do about it.
In safe mode the computer is slow but I can use it. The audio doesn't work and some things (like the background automatic change thing) are very slow.
but at least I can use the computer.
I have 100GB of free space
4Gb of RAM
lot of kernel panic
last interesting one (HFS: VOL Google Chrome very low disk
What to do? I would like to fix it...I tried to do somethings but this is the first time my Mac let me down and I am basically unable to do any work since a week. it was fine before of Christmas (that I spent trying to fix it) but now...I really need to find a solution.
I installed OnyX
Checked for permissions
deleted extra kext
Any idea?
Some kernel panic logs
Dec 27 17:57:01 Claudio kernel[0]: memorystatus_thread: idle exiting pid 926 [SleepServicesD]
Dec 27 17:57:10 Claudio com.apple.launchd[1] (com.apple.cfprefsd.xpc.daemon[717]): Exited: Killed: 9
Dec 27 17:57:10 Claudio kernel[0]: memorystatus_thread: idle exiting pid 717 [cfprefsd]
Dec 27 17:57:12 Claudio com.apple.launchd[1] (com.apple.sleepservicesd[931]): Exited: Killed: 9
Dec 27 17:57:12 Claudio kernel[0]: memorystatus_thread: idle exiting pid 931 [SleepServicesD]
Dec 27 17:52:24 Claudio.local WindowServer[87]: reenable_update_for_connection: UI updates were finally reenabled by application "Terminal" after 1.34 seconds (server forcibly re-enabled them after 1.00 seconds)
Dec 27 17:54:03 Claudio.local Google Chrome[835]: Cannot find function pointer pluginFactory for factory 053918F4-2869-11D7-A671-000A27E2DB90 in CFBundle/CFPlugIn 0x7b608e50 </Users/clapple/Library/Contextual Menu Items/ToastIt.plugin> (not loaded)
Dec 27 17:54:03 Claudio.local Google Chrome[835]: Cannot find function pointer ParallelsCMFactory for factory D92E055E-35BC-4A79-8DAE-9D77EE29DB70 in CFBundle/CFPlugIn 0x82462000 </Library/Contextual Menu Items/ParallelsCM.plugin> (not loaded)
Dec 27 17:54:06 Claudio.local Google Chrome[835]: Cannot find function pointer pluginFactory for factory 053918F4-2869-11D7-A671-000A27E2DB90 in CFBundle/CFPlugIn 0x7b608e50 </Users/clapple/Library/Contextual Menu Items/ToastIt.plugin> (not loaded)
Dec 27 17:54:06 Claudio.local Google Chrome[835]: Cannot find function pointer ParallelsCMFactory for factory D92E055E-35BC-4A79-8DAE-9D77EE29DB70 in CFBundle/CFPlugIn 0x82462000 </Library/Contextual Menu Items/ParallelsCM.plugin> (not loaded)
Dec 27 17:54:19 Claudio com.apple.launchd.peruser.501[121] (com.apple.pbs[914]): Exited: Killed: 9
Dec 27 17:54:19 Claudio kernel[0]: memorystatus_thread: idle exiting pid 914 [pbs]
Dec 27 17:54:23 Claudio.local Google Chrome[835]: Cannot find function pointer pluginFactory for factory 053918F4-2869-11D7-A671-000A27E2DB90 in CFBundle/CFPlugIn 0x7b608e50 </Users/clapple/Library/Contextual Menu Items/ToastIt.plugin> (not loaded)
Dec 27 17:54:23 Claudio.local Google Chrome[835]: Cannot find function pointer ParallelsCMFactory for factory D92E055E-35BC-4A79-8DAE-9D77EE29DB70 in CFBundle/CFPlugIn 0x82462000 </Library/Contextual Menu Items/ParallelsCM.plugin> (not loaded)
Dec 27 17:41:29 Claudio.local com.apple.SecurityServer[15]: UID 501 authenticated as user clapple (UID 501) for right 'com.apple.desktopservices'
Dec 27 17:41:29 Claudio.local com.apple.SecurityServer[15]: Succeeded authorizing right 'com.apple.desktopservices' by client '/System/Library/PrivateFrameworks/DesktopServicesPriv.framework/Versions/A/Res ources/Locum' [824] for authorization created by '/System/Library/CoreServices/Finder.app' [154] (100003,0)
Dec 27 17:41:29 Claudio.local coreservicesd[60]: Application App:"Finder" [ 0x0/0xd00d] @ 0x0x7f9a414cf280 tried to be brought forward, but isn't in fPermittedFrontASNs ( ( ASN:0x0-0x140140:) ), so denying.
Dec 27 17:41:29 Claudio.local WindowServer[87]: [cps/setfront] Failed setting the front application to Finder, psn 0x0-0xd00d, securitySessionID=0x186a2, err=-13066
Dec 27 17:41:39 Claudio kernel[0]: (default pager): [KERNEL]: default_pager_backing_store_monitor - send LO_WAT_ALERT
Dec 27 17:41:57 Claudio.local Dock[150]: no information back from LS about running process
Dec 27 17:42:07 Claudio kernel[0]: CODE SIGNING: cs_invalid_page(0x1000): p=839[ksadmin] clearing CS_VALID
Dec 27 17:42:12 Claudio kernel[0]: CODE SIGNING: cs_invalid_page(0x1000): p=844[ksadmin] clearing CS_VALID
Dec 27 17:42:38 Claudio kernel[0]: macx_swapoff SUCCESS
Dec 27 17:42:39 Claudio kernel[0]: (default pager): [KERNEL]: default_pager_backing_store_monitor - send LO_WAT_ALERT
Dec 27 17:43:28 Claudio kernel[0]: macx_swapoff SUCCESS
Dec 27 17:44:37 Claudio.local GoogleTalkPlugin[874]: objc[874]: Class MacCocoaSocketServerHelper is implemented in both /Library/Application Support/Google/GoogleTalkPlugin.app/Contents/MacOS/GoogleTalkPlugin and /Library/Application Support/Google/GoogleTalkPlugin.app/Contents/Frameworks/libgoogletalkremoting.d ylib. One of the two will be used. Which one is undefined.
Dec 27 17:44:38 Claudio.local VDCAssistant[876]: AVF encoder error: fail to create accelerator instance
Dec 27 17:44:39 Claudio.local GoogleTalkPlugin[874]: QuickTimeUSBVDCDigitizer: Found a camera (0x24400000) , but was not able to start it up (0xe00002c5)
Dec 27 17:45:04 Claudio.local Google Chrome[835]: invalid drawable
Dec 27 17:45:34 --- last message repeated 4 times ---
Dec 27 17:49:29 Claudio.local Google Chrome[835]: Cannot find function pointer pluginFactory for factory 053918F4-2869-11D7-A671-000A27E2DB90 in CFBundle/CFPlugIn 0x7b608e50 </Users/clapple/Library/Contextual Menu Items/ToastIt.plugin> (not loaded)
Dec 27 17:49:29 Claudio.local Google Chrome[835]: Cannot find function pointer ParallelsCMFactory for factory D92E055E-35BC-4A79-8DAE-9D77EE29DB70 in CFBundle/CFPlugIn 0x82462000 </Library/Contextual Menu Items/ParallelsCM.plugin> (not loaded)
Dec 27 17:22:20 Claudio.local WindowServer[87]: reenable_update_for_connection: UI updates were finally reenabled by application "Google Chrome" after 1.47 seconds (server forcibly re-enabled them after 1.00 seconds)
Dec 27 17:22:33 Claudio com.apple.launchd[1] (com.apple.sleepservicesd[751]): Exited: Killed: 9
Dec 27 17:22:33 Claudio kernel[0]: memorystatus_thread: idle exiting pid 751 [SleepServicesD]
Dec 27 17:33:01 Claudio kernel[0]: HFS: Vol: Google Chrome Very Low Disk: freeblks: 0, dangerlimit: 743
Dec 27 17:33:02 Claudio.local DiskImages UI Agent[782]: *** -[NSMachPort handlePortMessage:]: dropping incoming DO message because the connection is invalid
Dec 27 17:39:17 Claudio.local Google Chrome[199]: Cannot find function pointer pluginFactory for factory 053918F4-2869-11D7-A671-000A27E2DB90 in CFBundle/CFPlugIn 0x80dc84a0 </Users/clapple/Library/Contextual Menu Items/ToastIt.plugin> (not loaded)
Dec 27 17:39:17 Claudio.local Google Chrome[199]: Cannot find function pointer ParallelsCMFactory for factory D92E055E-35BC-4A79-8DAE-9D77EE29DB70 in CFBundle/CFPlugIn 0x810dd850 </Library/Contextual Menu Items/ParallelsCM.plugin> (not loaded)
Dec 27 17:40:56 Claudio.local Finder[154]: --ImageKit Error: setImageBrowserContext: bad context
Dec 27 17:40:57 Claudio.local Locum[820]: Connection with distnoted server was invalidated
Dec 27 17:12:07 Claudio.local Dock[150]: CGSSetWindowListGlobalClipShape: Invalid window 0x0
Dec 27 17:12:07 Claudio.local Dock[150]: Unable to open IOHIDSystem (e00002bd)
Dec 27 17:12:07 Claudio.local Dock[150]: CGSSetWindowListGlobalClipShape: Invalid window 0x0
Dec 27 17:12:07 Claudio kernel[0]: virtual bool IOHIDEventSystemUserClient::initWithTask(task_t, void *, UInt32): Client task not privileged to open IOHIDSystem for mapping memory (e00002c1)Normal Login
long spinning cursor before I could login
opened firefox / chrome / itunes
shut down
PS: I was offline
28/12/12 10:21:07.000 AM bootlog[0]: BOOT_TIME 1356682867 0
28/12/12 10:21:32.000 AM kernel[0]: Darwin Kernel Version 12.2.0: Sat Aug 25 00:48:52 PDT 2012; root:xnu-2050.18.24~1/RELEASE_X86_64
28/12/12 10:21:32.000 AM kernel[0]: vm_page_bootstrap: 920842 free pages and 54006 wired pages
28/12/12 10:21:32.000 AM kernel[0]: kext submap [0xffffff7f80741000 - 0xffffff8000000000], kernel text [0xffffff8000200000 - 0xffffff8000741000]
28/12/12 10:21:32.000 AM kernel[0]: zone leak detection enabled
28/12/12 10:21:32.000 AM kernel[0]: standard timeslicing quantum is 10000 us
28/12/12 10:21:32.000 AM kernel[0]: standard background quantum is 2500 us
28/12/12 10:21:32.000 AM kernel[0]: mig_table_max_displ = 74
28/12/12 10:21:32.000 AM kernel[0]: corecrypto kext started!
28/12/12 10:21:32.000 AM kernel[0]: Running kernel space in FIPS MODE
28/12/12 10:21:32.000 AM kernel[0]: Plist hmac value is 735d392b68241ef173d81097b1c8ce9ba283521626d1c973ac376838c466757d
28/12/12 10:21:32.000 AM kernel[0]: Computed hmac value is 735d392b68241ef173d81097b1c8ce9ba283521626d1c973ac376838c466757d
28/12/12 10:21:32.000 AM kernel[0]: corecrypto.kext FIPS integrity POST test passed!
28/12/12 10:21:32.000 AM kernel[0]: corecrypto.kext FIPS AES CBC POST test passed!
28/12/12 10:21:32.000 AM kernel[0]: corecrypto.kext FIPS TDES CBC POST test passed!
28/12/12 10:21:32.000 AM kernel[0]: corecrypto.kext FIPS SHA POST test passed!
28/12/12 10:21:32.000 AM kernel[0]: corecrypto.kext FIPS HMAC POST test passed!
28/12/12 10:21:32.000 AM kernel[0]: corecrypto.kext FIPS ECDSA POST test passed!
28/12/12 10:21:32.000 AM kernel[0]: corecrypto.kext FIPS DRBG POST test passed!
28/12/12 10:21:32.000 AM kernel[0]: corecrypto.kext FIPS POST passed!
28/12/12 10:21:32.000 AM kernel[0]: AppleACPICPU: ProcessorId=0 LocalApicId=0 Enabled
28/12/12 10:21:32.000 AM kernel[0]: AppleACPICPU: ProcessorId=1 LocalApicId=1 Enabled
28/12/12 10:21:32.000 AM kernel[0]: calling mpo_policy_init for TMSafetyNet
28/12/12 10:21:32.000 AM kernel[0]: Security policy loaded: Safety net for Time Machine (TMSafetyNet)
28/12/12 10:21:32.000 AM kernel[0]: calling mpo_policy_init for Sandbox
28/12/12 10:21:32.000 AM kernel[0]: Security policy loaded: Seatbelt sandbox policy (Sandbox)
28/12/12 10:21:32.000 AM kernel[0]: calling mpo_policy_init for Quarantine
28/12/12 10:21:32.000 AM kernel[0]: Security policy loaded: Quarantine policy (Quarantine)
28/12/12 10:21:32.000 AM kernel[0]: Copyright (c) 1982, 1986, 1989, 1991, 1993
28/12/12 10:21:32.000 AM kernel[0]: The Regents of the University of California. All rights reserved.
28/12/12 10:21:32.000 AM kernel[0]: MAC Framework successfully initialized
28/12/12 10:21:32.000 AM kernel[0]: using 16384 buffer headers and 10240 cluster IO buffer headers
28/12/12 10:21:32.000 AM kernel[0]: IOAPIC: Version 0x11 Vectors 64:87
28/12/12 10:21:32.000 AM kernel[0]: ACPI: System State [S0 S3 S4 S5]
28/12/12 10:21:32.000 AM kernel[0]: AppleIntelCPUPowerManagement: (built 23:03:24 Jun 24 2012) initialization complete
28/12/12 10:21:32.000 AM kernel[0]: PFM64 (36 cpu) 0xf80000000, 0x80000000
28/12/12 10:21:32.000 AM kernel[0]: [ PCI configuration begin ]
28/12/12 10:21:32.000 AM kernel[0]: console relocated to 0xf80010000
28/12/12 10:21:32.000 AM kernel[0]: PCI configuration changed (bridge=6 device=3 cardbus=0)
28/12/12 10:21:32.000 AM kernel[0]: [ PCI configuration end, bridges 7 devices 19 ]
28/12/12 10:21:32.000 AM kernel[0]: NVEthernet::start - Built Aug 25 2012 00:55:57
28/12/12 10:21:32.000 AM kernel[0]: FireWire (OHCI) Lucent ID 5901 built-in now active, GUID 002500fffea34384; max speed s800.
28/12/12 10:21:32.000 AM kernel[0]: mbinit: done [64 MB total pool size, (42/21) split]
28/12/12 10:21:32.000 AM kernel[0]: Pthread support ABORTS when sync kernel primitives misused
28/12/12 10:21:32.000 AM kernel[0]: rooting via boot-uuid from /chosen: 70E2B923-028F-3877-9451-C47E287C9B86
28/12/12 10:21:32.000 AM kernel[0]: Waiting on <dict ID="0"><key>IOProviderClass</key><string ID="1">IOResources</string><key>IOResourceMatch</key><string ID="2">boot-uuid-media</string></dict>
28/12/12 10:21:32.000 AM kernel[0]: com.apple.AppleFSCompressionTypeZlib kmod start
28/12/12 10:21:32.000 AM kernel[0]: com.apple.AppleFSCompressionTypeDataless kmod start
28/12/12 10:21:32.000 AM kernel[0]: com.apple.AppleFSCompressionTypeZlib load succeeded
28/12/12 10:21:32.000 AM kernel[0]: com.apple.AppleFSCompressionTypeDataless load succeeded
28/12/12 10:21:32.000 AM kernel[0]: AppleIntelCPUPowerManagementClient: ready
28/12/12 10:21:32.000 AM kernel[0]: BTCOEXIST off
28/12/12 10:21:32.000 AM kernel[0]: BRCM tunables:
28/12/12 10:21:32.000 AM kernel[0]: pullmode[1] txringsize[ 256] reapmin[ 32] reapcount[ 128]
28/12/12 10:21:32.000 AM kernel[0]: highWaterMark: VO[ 192] VI[ 192] BE[ 192] BK[ 192]
28/12/12 10:21:32.000 AM kernel[0]: Got boot device = IOService:/AppleACPIPlatformExpert/PCI0@0/AppleACPIPCI/SATA@B/AppleMCP79AHCI/PR T0@0/IOAHCIDevice@0/AppleAHCIDiskDriver/IOAHCIBlockStorageDevice/IOBlockStorageD river/Hitachi HTS543232L9SA02 Media/IOGUIDPartitionScheme/Customer@2
28/12/12 10:21:32.000 AM kernel[0]: BSD root: disk0s2, major 1, minor 2
28/12/12 10:21:32.000 AM kernel[0]: Kernel is LP64
28/12/12 10:21:08.737 AM com.apple.launchd[1]: *** launchd[1] has started up. ***
28/12/12 10:21:08.737 AM com.apple.launchd[1]: *** Shutdown logging is enabled. ***
28/12/12 10:21:29.460 AM com.apple.launchd[1]: (com.apple.automountd) Unknown key for boolean: NSSupportsSuddenTermination
28/12/12 10:21:35.000 AM kernel[0]: NVEthernet: Ethernet address 00:25:00:a3:43:84
28/12/12 10:21:35.000 AM kernel[0]: AirPort_Brcm4331: Ethernet address 00:25:00:3f:78:54
28/12/12 10:21:35.000 AM kernel[0]: IO80211Controller::dataLinkLayerAttachComplete(): adding AppleEFINVRAM notification
28/12/12 10:21:38.000 AM kernel[0]: macx_swapon SUCCESS
28/12/12 10:21:38.001 AM hidd[47]: Posting 'com.apple.iokit.hid.displayStatus' notifyState=1
28/12/12 10:21:48.000 AM kernel[0]: Waiting for DSMOS...
28/12/12 10:21:48.141 AM kdc[45]: label: default
28/12/12 10:21:48.142 AM kdc[45]: dbname: od:/Local/Default
28/12/12 10:21:48.142 AM kdc[45]: mkey_file: /var/db/krb5kdc/m-key
28/12/12 10:21:48.142 AM kdc[45]: acl_file: /var/db/krb5kdc/kadmind.acl
28/12/12 10:21:49.337 AM hidd[47]: void __IOHIDLoadBundles(): Loaded 0 HID plugins
28/12/12 10:21:49.000 AM kernel[0]: [IOBluetoothHCIController][start] -- completed
28/12/12 10:21:49.000 AM kernel[0]: AGC: 3.2.11, HW version=1.7.3, flags:0, features:4
28/12/12 10:21:49.000 AM kernel[0]: NVDANV50HAL loaded and registered.
28/12/12 10:21:49.000 AM kernel[0]: IOBluetoothUSBDFU::probe
28/12/12 10:21:49.000 AM kernel[0]: IOBluetoothUSBDFU::probe ProductID - 0x8213 FirmwareVersion - 0x0201
28/12/12 10:21:49.000 AM kernel[0]: [BroadcomBluetoothHCIControllerUSBTransport][start] -- completed
28/12/12 10:21:49.000 AM kernel[0]: [IOBluetoothHCIController][staticBluetoothHCIControllerTransportShowsUp] -- Received Bluetooth Controller register service notification
28/12/12 10:21:49.000 AM kernel[0]: NVDANV50HAL loaded and registered.
28/12/12 10:21:49.000 AM kernel[0]: Previous Shutdown Cause: 5
28/12/12 10:21:49.600 AM mDNSResponder[39]: mDNSResponder mDNSResponder-379.32.1 (Aug 31 2012 19:05:06) starting OSXVers 12
28/12/12 10:21:49.651 AM coreservicesd[62]: FindBestLSSession(), no match for inSessionID 0xfffffffffffffffc auditTokenInfo( uid=0 euid=0 auSessionID=100000 create=false
28/12/12 10:21:49.973 AM airportd[64]: _processDLILEvent: en1 attached (down)
28/12/12 10:21:50.000 AM kernel[0]: [IOBluetoothHCIController::setConfigState] calling registerService
28/12/12 10:21:50.000 AM kernel[0]: createVirtIf(): ifRole = 1
28/12/12 10:21:50.000 AM kernel[0]: in func createVirtualInterface ifRole = 1
28/12/12 10:21:50.000 AM kernel[0]: AirPort_Brcm4331_P2PInterface::init name <p2p0> role 1 this 0xffffff8011b1a000
28/12/12 10:21:50.000 AM kernel[0]: AirPort_Brcm4331_P2PInterface::init() <p2p> role 1
28/12/12 10:21:50.000 AM kernel[0]: Created virtif 0xffffff8011b1a000 p2p0
28/12/12 10:21:50.346 AM com.apple.SecurityServer[17]: Session 100000 created
28/12/12 10:21:50.407 AM appleeventsd[53]: main: Starting up
28/12/12 10:21:50.000 AM kernel[0]: DSMOS has arrived
28/12/12 10:21:51.000 AM kernel[0]: 00000000 00000020 NVEthernet::setLinkStatus - not Active
28/12/12 10:21:51.000 AM kernel[0]: AirPort: Link Down on en1. Reason 1 (Unspecified).
28/12/12 10:21:51.000 AM kernel[0]: en1::IO80211Interface::postMessage bssid changed
28/12/12 10:21:51.655 AM configd[16]: network changed.
28/12/12 10:21:52.224 AM configd[16]: setting hostname to "Claudio.local"
28/12/12 10:21:52.853 AM com.apple.usbmuxd[27]: usbmuxd-296.3 on Jul 25 2012 at 00:28:37, running 64 bit
28/12/12 10:21:55.087 AM com.apple.SecurityServer[17]: Entering service
28/12/12 10:21:56.012 AM kdc[45]: WARNING Found KDC certificate (O=System Identity,CN=com.apple.kerberos.kdc)is missing the PK-INIT KDC EKU, this is bad for interoperability.
28/12/12 10:21:55.906 AM systemkeychain[68]: done file: /var/run/systemkeychaincheck.done
28/12/12 10:21:56.749 AM configd[16]: network changed: DNS*
28/12/12 10:21:58.808 AM mDNSResponder[39]: D2D_IPC: Loaded
28/12/12 10:21:58.808 AM mDNSResponder[39]: D2DInitialize succeeded
28/12/12 10:21:59.113 AM stackshot[30]: Timed out waiting for IOKit to finish matching.
28/12/12 10:21:59.618 AM kdc[45]: KDC started
28/12/12 10:21:59.870 AM apsd[59]: CGSLookupServerRootPort: Failed to look up the port for "com.apple.windowserver.active" (1102)
28/12/12 10:22:00.008 AM apsd[59]: CGSLookupServerRootPort: Failed to look up the port for "com.apple.windowserver.active" (1102)
28/12/12 10:22:03.327 AM UserEventAgent[11]: Captive: [HandleNetworkInformationChanged:2435] nwi_state_copy returned NULL
28/12/12 10:22:03.590 AM loginwindow[42]: Login Window Application Started
28/12/12 10:22:03.617 AM locationd[43]: NOTICE,Location icon should now be in state 0
28/12/12 10:22:06.074 AM netbiosd[69]: Unable to start NetBIOS name service:
28/12/12 10:22:08.055 AM awacsd[57]: Starting awacsd connectivity-78 (Jul 26 2012 14:37:46)
28/12/12 10:22:08.242 AM awacsd[57]: InnerStore CopyAllZones: no info in Dynamic Store
28/12/12 10:22:09.088 AM mds[38]: (Normal) FMW: FMW 0 0
28/12/12 10:22:10.010 AM apsd[59]: CGSLookupServerRootPort: Failed to look up the port for "com.apple.windowserver.active" (1102)
28/12/12 10:22:15.727 AM digest-service[92]: label: default
28/12/12 10:22:15.727 AM digest-service[92]: dbname: od:/Local/Default
28/12/12 10:22:15.727 AM digest-service[92]: mkey_file: /var/db/krb5kdc/m-key
28/12/12 10:22:15.727 AM digest-service[92]: acl_file: /var/db/krb5kdc/kadmind.acl
28/12/12 10:22:15.730 AM digest-service[92]: digest-request: uid=0
28/12/12 10:22:16.870 AM rpcsvchost[93]: sandbox_init: com.apple.msrpc.netlogon.sb succeeded
28/12/12 10:22:16.971 AM digest-service[92]: digest-request: init request
28/12/12 10:22:17.135 AM digest-service[92]: digest-request: init return domain: BUILTIN server: CLAUDIO
28/12/12 10:22:23.244 AM awacsd[57]: Exiting
28/12/12 10:22:24.582 AM WindowServer[88]: Server is starting up
28/12/12 10:22:28.277 AM WindowServer[88]: Session 256 retained (2 references)
28/12/12 10:22:28.277 AM WindowServer[88]: Session 256 released (1 references)
28/12/12 10:22:28.440 AM WindowServer[88]: Session 256 retained (2 references)
28/12/12 10:22:28.441 AM WindowServer[88]: init_page_flip: page flip mode is on
28/12/12 10:22:29.533 AM WindowServer[88]: mux_initialize: Mode is logout
28/12/12 10:22:29.622 AM WindowServer[88]: GLCompositor enabled for tile size [256 x 256]
28/12/12 10:22:29.622 AM WindowServer[88]: CGXGLInitMipMap: mip map mode is on
28/12/12 10:22:29.691 AM WindowServer[88]: WSMachineUsesNewStyleMirroring: false
28/12/12 10:22:29.691 AM WindowServer[88]: Display 0x04272140: GL mask 0x5; bounds (0, 0)[1440 x 900], 39 modes available
Main, Active, on-line, enabled, built-in, boot, Vendor 610, Model 9c85, S/N 0, Unit 0, Rotation 0
UUID 0x0000061000009c850000000004272140
28/12/12 10:22:29.691 AM WindowServer[88]: Display 0x003f003d: GL mask 0xa; bounds (0, 0)[0 x 0], 1 modes available
off-line, enabled, Vendor ffffffff, Model ffffffff, S/N ffffffff, Unit 1, Rotation 0
UUID 0xffffffffffffffffffffffff003f003d
28/12/12 10:22:29.695 AM WindowServer[88]: Created shield window 0x5 for display 0x04272140
28/12/12 10:22:29.695 AM WindowServer[88]: Created shield window 0x6 for display 0x003f003d
28/12/12 10:22:29.698 AM WindowServer[88]: Display 0x04272140: GL mask 0x5; bounds (0, 0)[1440 x 900], 39 modes available
Main, Active, on-line, enabled, built-in, boot, Vendor 610, Model 9c85, S/N 0, Unit 0, Rotation 0
UUID 0x0000061000009c850000000004272140
28/12/12 10:22:29.698 AM WindowServer[88]: Display 0x003f003d: GL mask 0xa; bounds (2464, 0)[1 x 1], 1 modes available
off-line, enabled, Vendor ffffffff, Model ffffffff, S/N ffffffff, Unit 1, Rotation 0
UUID 0xffffffffffffffffffffffff003f003d
28/12/12 10:22:29.698 AM WindowServer[88]: CGXPerformInitialDisplayConfiguration
28/12/12 10:22:29.698 AM WindowServer[88]: Display 0x04272140: MappedDisplay Unit 0; Alias(0, 0x5); Vendor 0x610 Model 0x9c85 S/N 0 Dimensions 13.39 x 8.66; online enabled built-in, Bounds (0,0)[1440 x 900], Rotation 0, Resolution 1
28/12/12 10:22:29.698 AM WindowServer[88]: Display 0x003f003d: MappedDisplay Unit 1; Alias(1, 0xa); Vendor 0xffffffff Model 0xffffffff S/N -1 Dimensions 0.00 x 0.00; offline enabled, Bounds (2464,0)[1 x 1], Rotation 0, Resolution 1
28/12/12 10:22:29.699 AM WindowServer[88]: CGXMuxBoot: Boot normal
28/12/12 10:22:31.407 AM WindowServer[88]: GLCompositor: GL renderer id 0x0102260e, GL mask 0x00000003, accelerator 0x0000453f, unit 0, caps QEX|QGL|MIPMAP, vram 256 MB
28/12/12 10:22:31.427 AM WindowServer[88]: GLCompositor: GL renderer id 0x0102260e, GL mask 0x00000003, texture units 8, texture max 8192, viewport max {8192, 8192}, extensions FPRG|NPOT|GLSL|FLOAT
28/12/12 10:22:31.427 AM WindowServer[88]: GLCompositor: GL renderer id 0x0202260c, GL mask 0x0000000c, accelerator 0x00004823, unit 2, caps QEX|QGL|MIPMAP, vram 512 MB
28/12/12 10:22:31.440 AM WindowServer[88]: GLCompositor: GL renderer id 0x0202260c, GL mask 0x0000000c, texture units 8, texture max 8192, viewport max {8192, 8192}, extensions FPRG|NPOT|GLSL|FLOAT
28/12/12 10:22:31.481 AM loginwindow[42]: **DMPROXY** Found `/System/Library/CoreServices/DMProxy'.
28/12/12 10:22:31.493 AM WindowServer[88]: Unable to open IOHIDSystem (e00002bd)
28/12/12 10:22:31.696 AM WindowServer[88]: **DMPROXY** (2) Found `/System/Library/CoreServices/DMProxy'.
28/12/12 10:22:31.000 AM kernel[0]: virtual bool IOHIDEventSystemUserClient::initWithTask(task_t, void *, UInt32): Client task not privileged to open IOHIDSystem for mapping memory (e00002c1)
28/12/12 10:22:32.404 AM WindowServer[88]: Created shield window 0x7 for display 0x04272140
28/12/12 10:22:32.405 AM WindowServer[88]: Display 0x04272140: MappedDisplay Unit 0; ColorProfile { 2, "Color LCD"}; TransferTable (256, 3)
28/12/12 10:22:32.405 AM WindowServer[88]: Display 0x04272140: MappedDisplay Unit 0; ColorProfile { 2, "Color LCD"}; TransferTable (256, 3)
28/12/12 10:22:32.472 AM launchctl[106]: com.apple.findmymacmessenger: Already loaded
28/12/12 10:22:33.223 AM WindowServer[88]: Display 0x04272140: MappedDisplay Unit 0; ColorProfile { 2, "Color LCD"}; TransferTable (256, 3)
28/12/12 10:22:33.317 AM com.apple.SecurityServer[17]: Session 100004 created
28/12/12 10:22:34.412 AM locationd[114]: NOTICE,Location icon should now be in state 0
28/12/12 10:22:34.706 AM UserEventAgent[107]: cannot find useragent 1102
28/12/12 10:22:37.599 AM hidd[47]: CGSShutdownServerConnections: Detaching application from window server
28/12/12 10:22:37.599 AM hidd[47]: CGSDisplayServerShutdown: Detaching display subsystem from window server
28/12/12 10:22:37.814 AM loginwindow[42]: Login Window Started Security Agent
28/12/12 10:22:38.479 AM SecurityAgent[117]: This is the first run
28/12/12 10:22:38.479 AM SecurityAgent[117]: MacBuddy was run = 0
28/12/12 10:22:55.779 AM warmd[26]: [___bootcachectl_filter_out_sharedio_from_history_block_invoke_0:2244] Unable to open i386 shared cache: 2 No such file or directory
28/12/12 10:24:01.000 AM kernel[0]: considerRebuildOfPrelinkedKernel com.apple.driver.AppleMikeyDriver triggered rebuild
28/12/12 10:24:42.000 AM kernel[0]: disk0s2: I/O error.
28/12/12 10:26:30.000 AM kernel[0]: disk0s2: I/O error.
28/12/12 10:28:18.000 AM kernel[0]: disk0s2: I/O error.
28/12/12 10:28:19.349 AM com.apple.launchd[1]: (com.apple.xprotectupdater[25]) Exited with code: 255
28/12/12 10:29:37.000 AM kernel[0]: disk0s2: I/O error.
28/12/12 10:30:29.418 AM WindowServer[88]: Created shield window 0xa for display 0x04272140
28/12/12 10:30:29.418 AM WindowServer[88]: device_generate_desktop_screenshot: authw 0x0(0), shield 0x0(0)
28/12/12 10:30:30.459 AM WindowServer[88]: device_generate_lock_screen_screenshot: authw 0x0(0), shield 0x0(0)
28/12/12 10:30:54.000 AM kernel[0]: disk0s2: I/O error.
28/12/12 10:32:12.000 AM kernel[0]: disk0s2: I/O error.
28/12/12 10:32:47.757 AM WindowServer[88]: handle_will_sleep_auth_and_shield_windows: no lock state data
28/12/12 10:33:30.000 AM kernel[0]: disk0s2: I/O error.
28/12/12 10:34:48.000 AM kernel[0]: disk0s2: I/O error.
28/12/12 10:36:06.000 AM kernel[0]: disk0s2: I/O error.
28/12/12 10:37:23.000 AM kernel[0]: disk0s2: I/O error.
28/12/12 10:37:50.526 AM WindowServer[88]: Created shield window 0xb for display 0x04272140
28/12/12 10:37:50.526 AM WindowServer[88]: device_generate_desktop_screenshot: authw 0x0(0), shield 0x0(0)
28/12/12 10:37:51.567 AM WindowServer[88]: device_generate_lock_screen_screenshot: authw 0x0(0), shield 0x0(0)
28/12/12 10:38:42.000 AM kernel[0]: disk0s2: I/O error.
28/12/12 10:40:29.000 AM kernel[0]: disk0s2: I/O error.
28/12/12 10:40:35.690 AM WindowServer[88]: handle_will_sleep_auth_and_shield_windows: no lock state data
28/12/12 10:41:48.000 AM kernel[0]: disk0s2: I/O error.
28/12/12 10:43:05.000 AM kernel[0]: disk0s2: I/O error.
28/12/12 10:43:06.485 AM SecurityAgent[117]: User info context values set for clapple
28/12/12 10:43:06.639 AM CVMServer[97]: Check-in to the service com.apple.cvmsCompAgent_x86_64 failed. This is likely because you have either unloaded the job or the MachService has the ResetAtClose attribute specified in the launchd.plist. If present, this attribute should be removed.
28/12/12 10:43:07.919 AM SecurityAgent[117]: Login Window login proceeding
28/12/12 10:43:08.368 AM CVMServer[97]: Check-in to the service com.apple.cvmsCompAgent_x86_64 failed. This is likely because you have either unloaded the job or the MachService has the ResetAtClose attribute specified in the launchd.plist. If present, this attribute should be removed.
28/12/12 10:43:08.378 AM loginwindow[42]: Login Window - Returned from Security Agent
28/12/12 10:43:08.416 AM loginwindow[42]: ERROR | ScreensharingLoginNotification | Failed sending message to screen sharing GetScreensharingPort, err: 1102
28/12/12 10:43:08.437 AM CVMServer[97]: Check-in to the service com.apple.cvmsCompAgent_x86_64 failed. This is likely because you have either unloaded the job or the MachService has the ResetAtClose attribute specified in the launchd.plist. If present, this attribute should be removed.
28/12/12 10:43:08.597 AM loginwindow[42]: USER_PROCESS: 42 console
28/12/12 10:43:08.723 AM com.apple.launchd.peruser.501[136]: (com.apple.gamed) Ignored this key: UserName
28/12/12 10:43:08.723 AM com.apple.launchd.peruser.501[136]: (com.apple.gamed) Ignored this key: GroupName
28/12/12 10:43:08.724 AM com.apple.launchd.peruser.501[136]: (com.apple.ReportCrash) Falling back to default Mach exception handler. Could not find: com.apple.ReportCrash.Self
28/12/12 10:43:08.731 AM loginwindow[42]: Connection with distnoted server was invalidated
28/12/12 10:43:08.808 AM distnoted[142]: # distnote server agent absolute time: 1322.674891224 civil time: Fri Dec 28 10:43:08 2012 pid: 142 uid: 501 root: no
28/12/12 10:43:10.172 AM blued[149]: kBTXPCUpdateUserPreferences gConsoleUserUID = 501
28/12/12 10:43:10.249 AM locationd[150]: NOTICE,Location icon should now be in state 0
28/12/12 10:43:10.427 AM UserEventAgent[139]: cannot find fw daemon port 1102
28/12/12 10:43:13.046 AM com.apple.SecurityServer[17]: Session 100006 created
28/12/12 10:43:17.205 AM WindowServer[88]: **DMPROXY** (2) Found `/System/Library/CoreServices/DMProxy'.
28/12/12 10:43:17.564 AM WindowServer[88]: Display 0x04272140: MappedDisplay Unit 0; ColorProfile { 2, "Color LCD"}; TransferTable (256, 3)
28/12/12 10:43:17.880 AM talagent[165]: _LSSetApplicationInformationItem(kLSDefaultSessionID, asn, _kLSApplicationIsHiddenKey, hidden ? kCFBooleanTrue : kCFBooleanFalse, NULL) produced OSStatus -50 on line 623 in TCApplication.m
28/12/12 10:43:17.880 AM talagent[165]: _LSSetApplicationInformationItem(kLSDefaultSessionID, asn, TAL_kLSIsProxiedForTALKey, kCFBooleanTrue, NULL) produced OSStatus -50 on line 626 in TCApplication.m
28/12/12 10:43:17.889 AM WindowServer[88]: kCGErrorNotImplemented: receive_notification: CPXSetEventFilter failed
28/12/12 10:43:17.891 AM coreservicesd[62]: Can't change an application into stopped state for app App:"Activity Monitor" [ 0x0/0x9009] @ 0x0x7fb8b2c4b230 because it's already been started.
28/12/12 10:43:18.376 AM NetworkBrowserAgent[174]: Starting NetworkBrowserAgent
28/12/12 10:43:19.065 AM WindowServer[88]: CGXDisableUpdate: UI updates were forcibly disabled by application "SystemUIServer" for over 1.00 seconds. Server has re-enabled them.
28/12/12 10:43:19.406 AM WindowServer[88]: reenable_update_for_connection: UI updates were finally reenabled by application "SystemUIServer" after 1.34 seconds (server forcibly re-enabled them after 1.00 seconds)
28/12/12 10:43:20.425 AM coreaudiod[168]: 2012-12-28 10:43:20.424308 AM [AirPlay] Started browsing for _airplay._tcp.
28/12/12 10:43:20.425 AM coreaudiod[168]: 2012-12-28 10:43:20.424941 AM [AirPlay] Started browsing for _raop._tcp.
28/12/12 10:43:22.259 AM AirPlayUIAgent[176]: Bug: 12C60: liblaunch.dylib + 23849 [2F71CAF8-6524-329E-AC56-C506658B4C0C]: 0x25
28/12/12 10:43:25.062 AM com.apple.launchd.peruser.501[136]: (com.apple.afpstat-qfa[191]) Job failed to exec(3). Setting up event to tell us when to try again: 2: No such file or directory
28/12/12 10:43:25.062 AM com.apple.launchd.peruser.501[136]: (com.apple.afpstat-qfa[191]) Job failed to exec(3) for weird reason: 2
28/12/12 10:43:25.000 AM kernel[0]: CODE SIGNING: cs_invalid_page(0x1000): p=193[GoogleSoftwareUp] clearing CS_VALID
28/12/12 10:43:25.601 AM SystemUIServer[166]: *** WARNING: -[NSImage compositeToPoint:operation:fraction:] is deprecated in MacOSX 10.8 and later. Please use -[NSImage drawAtPoint:fromRect:operation:fraction:] instead.
28/12/12 10:43:25.603 AM SystemUIServer[166]: *** WARNING: -[NSImage compositeToPoint:fromRect:operation:fraction:] is deprecated in MacOSX 10.8 and later. Please use -[NSImage drawAtPoint:fromRect:operation:fraction:] instead.
28/12/12 10:43:32.659 AM genatsdb[211]: ########## genatsdb Sandboxed. ##########
28/12/12 10:43:35.286 AM Google Drive[201]: PyObjCPointer created: at 0x700cf8 of type {__CFBoolean=}
28/12/12 10:43:35.287 AM Google Drive[201]: PyObjCPointer created: at 0x700cf0 of type {__CFBoolean=}
28/12/12 10:43:35.289 AM Google Drive[201]: PyObjCPointer created: at 0x700d00 of type {__CFNumber=}
28/12/12 10:43:35.289 AM Google Drive[201]: PyObjCPointer created: at 0x700d10 of type {__CFNumber=}
28/12/12 10:43:35.290 AM Google Drive[201]: PyObjCPointer created: at 0x700d20 of type {__CFNumber=}
28/12/12 10:43:37.120 AM WindowServer[88]: CGXDisableUpdate: UI updates were forcibly disabled by application "Activity Monitor" for over 1.00 seconds. Server has re-enabled them.
28/12/12 10:43:39.738 AM WindowServer[88]: reenable_update_for_connection: UI updates were finally reenabled by application "Activity Monitor" after 3.62 seconds (server forcibly re-enabled them after 1.00 seconds)
28/12/12 10:43:52.694 AM GoogleSoftwareUpdateDaemon[218]: -[KeystoneDaemon logServiceState] GoogleSoftwareUpdate daemon (1.1.0.3659) vending:
com.google.Keystone.Daemon.UpdateEngine: 2 connection(s)
com.google.Keystone.Daemon.Administration: 0 connection(s)
28/12/12 10:43:52.995 AM GoogleSoftwareUpdateDaemon[218]: -[KSUpdateEngine updateProductID:] KSUpdateEngine updating product ID: "com.google.Keystone"
28/12/12 10:43:53.307 AM GoogleSoftwareUpdateDaemon[218]: -[KSCheckAction performAction] KSCheckAction checking 1 ticket(s).
28/12/12 10:43:54.997 AM GoogleSoftwareUpdateDaemon[218]: -[KSUpdateCheckAction performAction] KSUpdateCheckAction starting update check for ticket(s): {(
<KSTicket:0x5c2f710
productID=com.google.Keystone
version=1.1.0.3659
xc=<KSPathExistenceChecker:0x5c2b3b0 path=/Library/Google/GoogleSoftwareUpdate/GoogleSoftwareUpdate.bundle/>
serverType=Omaha
url=https://tools.google.com/service/update2
creationDate=2010-06-26 08:33:37
>
Using server: <KSOmahaServer:0x5c32e00
engine=<KSDaemonUpdateEngine:0x69177e0>
params={
EngineVersion = "1.1.0.3659";
ActivesInfo = {
"com.google.picasa" = {
LastActivePingDate = 2012-11-15 08:03:41 +0000;
LastActiveDate = 2012-11-14 23:16:12 +0000;
LastRollCallPingDate = 2012-12-27 08:04:57 +0000;
"com.google.macphotouploader" = {
LastRollCallPingDate = 2012-12-26 08:04:55 +0000;
"com.google.Chrome" = {
LastActiveDate = 2012-12-27 19:58:03 +0000;
LastActivePingDate = 2012-12-27 08:04:57 +0000;
LastRollCallPingDate = 2012-12-27 08:04:57 +0000;
"com.google.GoogleDrive" = {
LastActiveDate = 2012-12-27 20:39:13 +0000;
LastActivePingDate = 2012-12-26 08:04:56 +0000;
LastRollCallPingDate = 2012-12-27 08:04:57 +0000;
"com.google.Keystone" = {
LastRollCallPingDate = 2012-12-27 08:04:58 +0000;
LastActivePingDate = 2012-12-27 08:04:58 +0000;
LastActiveDate = 2012-12-28 08:43:46 +0000;
"com.Google.GoogleEarthPlugin.intel" = {
LastRollCallPingDate = 2012-12-27 08:04:57 +0000;
"com.Google.GoogleEarthPlus" = {
LastRollCallPingDate = 2012-12-20 08:04:44 +0000;
"com.google.talkplugin" = {
LastRollCallPingDate = 2012-12-27 08:04:57 +0000;
LastActiveDate = 2012-12-06 17:20:01 +0000;
LastActivePingDate = 2012-12-07 08:04:20 +0000;
"com.Google.GoogleEarthPlus.intel" = {
LastRollCallPingDate = 2012-12-20 08:04:44 +0000;
UserInitiated = 0;
IsSystem = 1;
OmahaOSVersion = "10.8.2_i486";
Identity = KeystoneDaemon;
AllowedSubdomains = (
".omaha.sandbox.google.com",
".tools.google.com",
".www.google.com",
".corp.google.com"
>
28/12/12 10:43:55.859 AM GoogleSoftwareUpdateDaemon[218]: -[KSUpdateCheckAction performAction] KSUpdateCheckAction running KSServerUpdateRequest: <KSOmahaServerUpdateRequest:0x691fd30
server=<KSOmahaServer:0x5c32e00>
url="https://tools.google.com/service/update2"
runningFetchers=0
tickets=1
activeTickets=1
rollCallTickets=1
body=
<?xml version="1.0" encoding="UTF-8" standalone="yes"?>
<o:gupdate xmlns:o="http://www.google.com/update2/request" protocol="2.0" version="KeystoneDaemon-1.1.0.3659" ismachine="1">
<o:os platform="mac" version="MacOSX" sp="10.8.2_i486"></o:os>
<o:app appid="com.google.Keystone" version="1.1.0.3659" lang="en-us" installage="916" brand="GGLG">
<o:ping r="1" a="1"></o:ping>
<o:updatecheck></o:updatecheck>
</o:app>
</o:gupdate>
>
28/12/12 10:44:02.416 AM SystemUIServer[166]: [0x7fbeba09efd0] |Server|Warning| failed to connect to the server: NSPortTimeoutException connection timeout: did not receive reply
28/12/12 10:44:02.638 AM GoogleSoftwareUpdateDaemon[218]: -[KSOutOfProcessFetcher(PrivateMethods) helperDidTerminate:] The Internet connection appears to be offline. [NSURLErrorDomain:-1009]
28/12/12 10:44:02.638 AM GoogleSoftwareUpdateDaemon[218]: -[KSServerUpdateRequest(PrivateMethods) fetcher:failedWithError:] KSServerUpdateRequest fetch failed. (productIDs: com.google.Keystone) [com.google.UpdateEngine.CoreErrorDomain:702 - 'https://tools.google.com/service/update2'] (The Internet connection appears to be offline. [NSURLErrorDomain:-1009])
28/12/12 10:44:02.640 AM GoogleSoftwareUpdateDaemon[218]: -[KSUpdateCheckAction(PrivateMethods) finishAction] KSUpdateCheckAction found updates: {( )}
28/12/12 10:44:03.846 AM GoogleSoftwareUpdateDaemon[218]: -[KSPrefetchAction performAction] KSPrefetchAction no updates to prefetch.
28/12/12 10:44:03.847 AM GoogleSoftwareUpdateDaemon[218]: -[KSMultiUpdateAction performAction] KSSilentUpdateAction had no updates to apply.
28/12/12 10:44:03.849 AM GoogleSoftwareUpdateDaemon[218]: -[KSMultiUpdateAction performAction] KSPromptAction had no updates to apply.
28/12/12 10:44:03.904 AM GoogleSoftwareUpdateDaemon[218]: -[KSUpdateEngine(PrivateMethods) updateFinish] KSUpdateEngine update processing complete.
28/12/12 10:44:03.914 AM GoogleSoftwareUpdateDaemon[218]: -[KSUpdateEngine updateAllProducts] KSUpdateEngine updating all installed products.
28/12/12 10:44:03.917 AM GoogleSoftwareUpdateDaemon[218]: -[KSCheckAction performAction] KSCheckAction checking 4 ticket(s).
28/12/12 10:44:04.932 AM GoogleSoftwareUpdateDaemon[218]: -[KSCheckAction performAction] KSCheckAction ignored these tickets for products that were not installed: {(
<KSTicket:0x691fa80
productID=com.google.macphotouploader
version=1.5.0.1425
xc=<KSLaunchServicesExistenceChecker:0x691e030 bundle=com.google.macphotouploader>
url=https://tools.google.com/service/update2
creationDate=2009-10-04 07:19:18
>
28/12/12 10:44:04.939 AM GoogleSoftwareUpdateDaemon[218]: -[KSUpdateCheckAction performAction] KSUpdateCheckAction starting update check for ticket(s): {(
<KSTicket:0x691dc20
productID=com.google.Keystone
version=1.1.0.3659
xc=<KSPathExistenceChecker:0x69244a0 path=/Library/Google/GoogleSoftwareUpdate/GoogleSoftwareUpdate.bundle/>
serverType=Omaha
url=https://tools.google.com/service/update2
creationDate=2010-06-26 08:33:37
>,
<KSTicket:0x691f010
productID=com.google.talkplugin
version=3.10.2.10212
xc=<KSPathExistenceChecker:0x6920280 path=/Library/Application Support/Google/GoogleTalkPlugin.app>
serverType=Omaha
url=https://tools.google.com/service/update2
creationDate=2009-04-20 08:20:22
>,
<KSTicket:0x69224b0
productID=com.google.Chrome
version=23.0.1271.101
xc=<KSPathExistenceChecker:0x69242a0 path=/Applications/Google Chrome.app>
serverType=Omaha
url=https://tools.google.com/service/update2
creationDate=2010-01-26 23:56:53
tagPath=/Applications/Google Chrome.app/Contents/Info.plist
tagKey=KSChannelID
versionPath=/Applications/Google Chrome.app/Contents/Info.plist
versionKey=KSVersion
>
Using server: <KSOmahaServer:0x6920010
engine=<KSDaemonUpdateEngine:0x69177e0>
params={
EngineVersion = "1.1.0.3659";
ActivesInfo = {
"com.google.picasa" = {
LastActivePingDate = 2012-11-15 08:03:41 +0000;
LastActiveDate = 2012-11-14 23:16:12 +0000;
LastRollCallPingDate = 2012-12-27 08:04:57 +0000;
"com.google.macphotouploader" = {
LastRollCallPingDate = 2012-12-26 08:04:55 +0000;
"com.google.Chrome" = {
LastActiveDate = 2012-12-27 19:58:03 +0000;
LastActivePingDate = 2012-12-27 08:04:57 +0000;
LastRollCallPingDate = 2012-12-27 08:04:57 +0000;
"com.google.GoogleDrive" = {
LastActiveDate = 2012-12-27 20:39:13 +0000;
LastActivePingDate = 2012-12-26 08:04:56 +0000;
LastRollCallPingDate = 2012-12-27 08:04:57 +0000;
"com.google.Keystone" = {
LastRollCallPingDate = 2012-12-27 08:04:58 +0000;
LastActivePingDate = 2012-12-27 08:04:58 +0000;
LastActiveDate = 2012-12-28 08:43:46 +0000;
"com.Google.GoogleEarthPlugin.intel" = {
LastRollCallPingDate = 2012-12-27 08:04:57 +0000;
"com.Google.GoogleEarthPlus" = {
LastRollCallPingDate = 2012-12-20 08:04:44 +0000;
"com.google.talkplugin" = {
LastRollCallPingDate = 2012-12-27 08:04:57 +0000;
LastActiveDate = 2012-12-06 17:20:01 +0000;
LastActivePingDate = 2012-12-07 08:04:20 +0000;
"com.Google.GoogleEarthPlus.intel" = {
LastRollCallPingDate = 2012-12-20 08:04:44 +0000;
UserInitiated = 0;
IsSystem = 1;
OmahaOSVersion = "10.8.2_i486";
Identity = KeystoneDaemon;
AllowedSubdomains = (
".omaha.sandbox.google.com",
".tools.google.com",
".www.google.com",
".corp.google.com"
>
28/12/12 10:44:05.237 AM GoogleSoftwareUpdateDaemon[218]: -[KSUpdateCheckAction performAction] KSUpdateCheckAction running KSServerUpdateRequest: <KSOmahaServerUpdateRequest:0x6928b40
server=<KSOmahaServer:0x6920010>
url="https://tools.google.com/service/update2"
runningFetchers=0
tickets=3
activeTickets=2
rollCallTickets=3
body=
<?xml version="1.0" encoding="UTF-8" standalone="yes"?>
<o:gupdate xmlns:o="http://www.google.com/update2/request" protocol="2.0" version="KeystoneDaemon-1.1.0.3659" ismachine="1">
<o:os platform="mac" version="MacOSX" sp="10.8.2_i486"></o:os>
<o:app appid="com.google.Keystone" version="1.1.0.3659" lang="en-us" installage="916" brand="GGLG">
<o:ping r="1" a="1"></o:ping>
<o:updatecheck></o:updatecheck>
</o:app>
<o:app appid="com.google.talkplugin" version="3.10.2.10212" lang="en-us" installage="1348" brand="GGLG">
<o:ping r="1"></o:ping>
<o:updatecheck></o:updatecheck>
</o:app>
<o:app appid="com.google.Chrome" version="23.0.1271.101" lang="en-us" installage="1066" brand="GGLG">
<o:ping r="1" a="1"></o:ping>
<o:updatecheck></o:updatecheck>
</o:app>
</o:gupdate>
>
28/12/12 10:44:05.682 AM SyncServer[212]: [0x7fae82c1b980] |DataManager|Warning| Client com.apple.Mail sync alert tool path /System/Library/Frameworks/Message.framework/Resources/MailSync does not exist.
28/12/12 10:44:06.594 AM GoogleSoftwareUpdateDaemon[218]: -[KSOutOfProcessFetcher(PrivateMethods) helperDidTerminate:] The Internet connection appears to be offline. [NSURLErrorDomain:-1009]
28/12/12 10:44:06.595 AM GoogleSoftwareUpdateDaemon[218]: -[KSServerUpdateRequest(PrivateMethods) fetcher:failedWithError:] KSServerUpdateRequest fetch failed. (productIDs: com.google.Chrome, ... (3)) [com.google.UpdateEngine.CoreErrorDomain:702 - 'https://tools.google.com/service/update2'] (The Internet connection appears to be offline. [NSURLErrorDomain:-1009])
28/12/12 10:44:06.608 AM GoogleSoftwareUpdateDaemon[218]: -[KSUpdateCheckAction(PrivateMethods) finishAction] KSUpdateCheckAction found updates: {( )}
28/12/12 10:44:07.101 AM GoogleSoftwareUpdateDaemon[218]: -[KSPrefetchAction performAction] KSPrefetchAction no updates to prefetch.
28/12/12 10:44:07.107 AM GoogleSoftwareUpdateDaemon[218]: -[KSMultiUpdateAction performAction] KSSilentUpdateAction had no updates to apply.
28/12/12 10:44:07.109 AM GoogleSoftwareUpdateDaemon[218]: -[KSMultiUpdateAction performAction] KSPromptAction had no updates to apply.
28/12/12 10:44:07.112 AM GoogleSoftwareUpdateDaemon[218]: -[KSUpdateEngine(PrivateMethods) updateFinish] KSUpdateEngine update processing complete.
28/12/12 10:45:58.000 AM kernel[0]: disk0s2: I/O error.
28/12/12 10:46:07.387 AM GoogleSoftwareUpdateDaemon[218]: -[KeystoneDaemon logServiceState] GoogleSoftwareUpdate daemon (1.1.0.3659) vending:
com.google.Keystone.Daemon.UpdateEngine: 1 connection(s)
com.google.Keystone.Daemon.Administration: 0 connection(s)
28/12/12 10:46:14.000 AM kernel[0]: CODE SIGNING: cs_invalid_page(0x1000): p=236[ksadmin] clearing CS_VALID
28/12/12 10:46:20.000 AM kernel[0]: CODE SIGNING: cs_invalid_page(0x1000): p=238[ksadmin] clearing CS_VALID
28/12/12 10:46:22.789 AM GoogleSoftwareUpdateDaemon[218]: -[KeystoneDaemon main] GoogleSoftwareUpdateDaemon inactive, shutdown.
28/12/12 10:46:30.419 AM genatsdb[211]: *GENATSDB* FontObjects generated = 600
28/12/12 10:47:03.481 AM com.apple.kextcache[126]: Kernel file /mach_kernel does not contain requested arch: i386
28/12/12 10:47:51.480 AM com.apple.kextcache[126]: Created prelinked kernel /System/Library/Caches/com.apple.kext.caches/Startup/kernelcache.
28/12/12 10:48:08.049 AM mdwrite[250]: [ERROR] [0.000s] com.apple. UBItemStatusNotification.c:805 _do_UBItemStatusNotificationRegisterURLs() can't find realpath for "/Users/clapple/Library/Mobile Documents/com~apple~system~spotlight/mdlabels", was blocked at "/Users/clapple/Library/Mobile Documents": 2 (No such file or directory)
28/12/12 10:48:08.049 AM mdwrite[250]: [ERROR] [0.001s] com.apple. UBItemStatusNotification.c:805 _do_UBItemStatusNotificationRegisterURLs() can't find realpath for "/Users/clapple/Library/Mobile Documents/com~apple~system~spotlight/mdlabels", was blocked at "/Users/clapple/Library/Mobile Documents": 2 (No such file or directory)
28/12/12 10:49:03.752 AM CVMServer[97]: cvmsReadServiceCache:5787: Data file checksum mismatch for file /System/Library/Caches/com.apple.CVMS/OpenCLCPU.i386.501.data!
28/12/12 10:49:17.388 AM Dock[164]: no information back from LS about running process
28/12/12 10:49:17.000 AM kernel[0]: CODE SIGNING: cs_invalid_page(0x1000): p=267[ksadmin] clearing CS_VALID
28/12/12 10:49:20.000 AM kernel[0]: CODE SIGNING: cs_invalid_page(0x1000): p=273[ksadmin] clearing CS_VALID
28/12/12 10:50:16.511 AM mDNSResponder[39]: ERROR: handle_resolve_request bad interfaceIndex 2
28/12/12 10:50:16.516 AM mDNSResponder[39]: ERROR: handle_resolve_request bad interfaceIndex 3
28/12/12 10:50:16.521 AM mDNSResponder[39]: ERROR: handle_resolve_request bad interfaceIndex 4
28/12/12 10:50:16.525 AM mDNSResponder[39]: ERROR: handle_resolve_request bad interfaceIndex 5
28/12/12 10:50:16.529 AM mDNSResponder[39]: ERROR: handle_resolve_request bad interfaceIndex 6
28/12/12 10:50:16.532 AM mDNSResponder[39]: ERROR: handle_resolve_request bad interfaceIndex 7
28/12/12 10:50:16.536 AM mDNSResponder[39]: ERROR: handle_resolve_request bad interfaceIndex 8
28/12/12 10:50:16.539 AM mDNSResponder[39]: ERROR: handle_resolve_request bad interfaceIndex 9
28/12/12 10:50:16.541 AM mDNSResponder[39]: ERROR: handle_resolve_request bad interfaceIndex 10
28/12/12 10:50:16.544 AM mDNSResponder[39]: ERROR: handle_resolve_request bad interfaceIndex 11
28/12/12 10:50:16.547 AM mDNSResponder[39]: ERROR: handle_resolve_request bad interfaceIndex 12
28/12/12 10:50:16.550 AM mDNSResponder[39]: ERROR: handle_resolve_request bad interfaceIndex 13
28/12/12 10:50:16.553 AM mDNSResponder[39]: ERROR: handle_resolve_request bad interfaceIndex 14
28/12/12 10:50:16.556 AM mDNSResponder[39]: ERROR: handle_resolve_request bad interfaceIndex 15
28/12/12 10:50:16.559 AM mDNSResponder[39]: ERROR: handle_resolve_request bad interfaceIndex 16
28/12/12 10:50:16.561 AM mDNSResponder[39]: ERROR: handle_resolve_request bad interfaceIndex 17
28/12/12 10:50:16.565 AM mDNSResponder[39]: ERROR: handle_resolve_request bad interfaceIndex 18
28/12/12 10:50:16.568 AM mDNSResponder[39]: ERROR: handle_resolve_request bad interfaceIndex 19
28/12/12 10:50:16.571 AM mDNSResponder[39]: ERROR: handle_resolve_request bad interfaceIndex 20
28/12/12 10:50:16.574 AM mDNSResponder[39]: ERROR: handle_resolve_request bad interfaceIndex 21
28/12/12 10:50:16.576 AM mDNSResponder[39]: ERROR: handle_resolve_request bad interfaceIndex 22
28/12/12 10:50:16.579 AM mDNSResponder[39]: ERROR: handle_resolve_request bad interfaceIndex 23
28/12/12 10:50:16.582 AM mDNSResponder[39]: ERROR: handle_resolve_request bad interfaceIndex 24
28/12/12 10:51:07.386 AM iTunes[285]: 2012-12-28 10:51:07.385678 AM [AVSystemController] Stopping AirPlay
28/12/12 10:51:15.626 AM com.apple.launchd.peruser.501[136]: (com.apple.PackageKit.InstallStatus) Throttling respawn: Will start in 8 seconds
28/12/12 10:51:19.217 AM coreservicesd[62]: SendFlattenedData, got error #268435460 (ipc/send) timed out from ::mach_msg(), sending notification kLSNotifyChildDeath to notificationID=189
28/12/12 10:51:19.319 AM WindowServer[88]: dict count after removing entry for window 0x23 is 0
28/12/12 10:51:19.336 AM WindowServer[88]: CGXGetConnectionProperty: Invalid connection 43779
28/12/12 10:51:19.336 AM WindowServer[88]: CGXGetConnectionProperty: Invalid connection 43779
28/12/12 10:51:19.336 AM WindowServer[88]: CGXGetConnectionProperty: Invalid connection 43779
28/12/12 10:51:19.337 AM WindowServer[88]: CGXGetConnectionProperty: Invalid connection 43779
28/12/12 10:51:19.337 AM WindowServer[88]: CGXGetConnectionProperty: Invalid connection 43779
28/12/12 10:51:19.360 AM com.apple.launchd.peruser.501[136]: (com.apple.AirPlayUIAgent[176]) Exited: Killed: 9
28/12/12 10:51:19.377 AM WindowServer[88]: CGXGetConnectionProperty: Invalid connection 43779
28/12/12 10:51:19.377 AM WindowServer[88]: CGXGetConnectionProperty: Invalid connection 43779
28/12/12 10:51:19.377 AM WindowServer[88]: CGXGetConnectionProperty: Invalid connection 43779
28/12/12 10:51:19.377 AM WindowServer[88]: CGXGetConnectionProperty: Invalid connection 43779
28/12/12 10:51:19.377 AM WindowServer[88]: CGXGetConnectionProperty: Invalid connection 43779
28/12/12 10:51:19.387 AM UserEventAgent[11]: Captive: [UserAgentDied:139] User Agent @port=41991 Died
28/12/12 10:51:19.394 AM coreservicesd[62]: SendFlattenedData, got error #268435459 (ipc/send) invalid destination port from ::mach_msg(), sending notification kLSNotifyApplicationDeath to notificationID=116
28/12/12 10:51:19.394 AM coreservicesd[62]: SendFlattenedData, got error #268435459 (ipc/send) invalid destination port from ::mach_msg(), sending notification kLSNotifyApplicationDeath to notificationID=134
28/12/12 10:51:19.395 AM coreservicesd[62]: SendFlattenedData, got error #268435460 (ipc/send) timed out from ::mach_msg(), sending notification kLSNotifyApplicationDeath to notificationID=170
28/12/12 10:51:19.395 AM coreservicesd[62]: SendFlattenedData, got error #268435460 (ipc/send) timed out from ::mach_msg(), sending notification kLSNotifyApplicationDeath to notificationID=217
28/12/12 10:51:19.396 AM coreservicesd[62]: SendFlattenedData, got error #268435460 (ipc/send) timed out from ::mach_msg(), sending notification kLSNotifyApplicationDeath to notificationID=100
28/12/12 10:51:19.387 AM com.apple.launchd.peruser.501[136]: ([0x0-0x1c01c].com.apple.AppleSpell[251]) Exited: Terminated: 15
28/12/12 10:51:19.387 AM com.apple.launchd.peruser.501[136]: ([0x0-0x30030].com.apple.iTunesHelper[290]) Exited with code: 1
28/12/12 10:51:19.412 AM com.apple.launchd[1]: (com.apple.metadata.mds.scan[125]) Exited: Terminated: 15
28/12/12 10:51:19.415 AM com.apple.launchd.peruser.501[136]: (com.apple.mdworker.bundles[259]) Exited: Terminated: 15
28/12/12 10:51:19.423 AM com.apple.launchd.peruser.501[136]: (com.apple.UserEventAgent-Aqua[139]) Exited: Killed: 9
28/12/12 10:51:19.433 AM loginwindow[42]: DEAD_PROCESS: 42 console
28/12/12 10:51:21.612 AM shutdown[295]: halt by clapple:
28/12/12 10:51:21.612 AM shutdown[295]: SHUTDOWN_TIME: 1356684681 612198
28/12/12 10:51:21.000 AM kernel[0]: Kext loading now disabled.
28/12/12 10:51:21.000 AM kernel[0]: Kext unloading now disabled.
28/12/12 10:51:21.000 AM kernel[0]: Kext autounloading now disabled.
28/12/12 10:51:21.000 AM kernel[0]: Kernel requests now disabled.
28/12/12 10:59:13.000 AM bootlog[0]: BOOT_TIME 1356685153 0 -
Imac 27 Intel will not boot normally only in Safe Mode
I posted previously but the answer to the question was did it wake up in safe mode, i did not give it a chance and I restored from back up to 10.10, upgraded to 10.10.1 and it worked for 1 week and returned to the previous problem.
I ran AHT - Passed, reset PRAM, verified disc - Passed, repaired permissions and removed each RAM module and still will only boot in safe mode. The crash report is below.
It locked up while on Safari, and wake up. When booting it loads the first 25% then goes to grey screen and stays there with spinning beach ball or just pointer never goes to log in screen.
In Ten (10) Crash logs it gives me the following reason:
Process: fontd [337]
Path: /System/Library/Frameworks/ApplicationServices.framework/Versions/A/Frameworks/ ATS.framework/Versions/A/Support/fontd
Identifier: fontd
Version: 375
Code Type: X86-64 (Native)
Parent Process: ??? [1]
Responsible: fontd [337]
User ID: 501
Date/Time: 2014-12-26 12:21:45.036 -0500
OS Version: Mac OS X 10.10.1 (14B25)
Report Version: 11
Anonymous UUID: 3D86DE4D-DF6F-C140-16F8-4F80DBCD6634
Time Awake Since Boot: 250 seconds
Crashed Thread: 2 Dispatch queue: Scanner Queue
Exception Type: EXC_BAD_ACCESS (SIGSEGV)
Exception Codes: EXC_I386_GPFLTEtreCheck version: 2.1.5 (108)
Report generated December 28, 2014 at 2:44:03 PM EST
Click the [Support] links for help with non-Apple products.
Click the [Details] links for more information about that line.
Click the [Adware] links for help removing adware.
Hardware Information: ℹ️
iMac (27-inch, Late 2009) (Verified)
iMac - model: iMac11,1
1 2.66 GHz Intel Core i5 CPU: 4-core
12 GB RAM Upgradeable
BANK 0/DIMM0
2 GB DDR3 1067 MHz ok
BANK 1/DIMM0
2 GB DDR3 1067 MHz ok
BANK 0/DIMM1
4 GB DDR3 1067 MHz ok
BANK 1/DIMM1
4 GB DDR3 1067 MHz ok
Bluetooth: Old - Handoff/Airdrop2 not supported
Wireless: en1: 802.11 a/b/g/n
Video Information: ℹ️
ATI Radeon HD 4850 - VRAM: 512 MB
iMac 2560 x 1440
System Software: ℹ️
OS X 10.10.1 (14B25) - Uptime: 2:13:47
Disk Information: ℹ️
ST31000528ASQ disk0 : (1 TB)
EFI (disk0s1) <not mounted> : 210 MB
Macintosh HD (disk0s2) / : 999.35 GB (528.66 GB free)
Recovery HD (disk0s3) <not mounted> [Recovery]: 650 MB
OPTIARC DVD RW AD-5680H
USB Information: ℹ️
HP Officejet 6500 E709n
Apple Internal Memory Card Reader
Apple Inc. BRCM2046 Hub
Apple Inc. Bluetooth USB Host Controller
Alcor Micro Corp USB Card Reader
Apple Computer, Inc. IR Receiver
Apple Inc. Built-in iSight
Firewire Information: ℹ️
LaCie d2 DVDRW FW/USB 400mbit - 400mbit max
LaCie d2 Quadra v3C 800mbit - 800mbit max
EFI (disk1s1) <not mounted> : 210 MB
Time Machine (disk1s2) /Volumes/Time Machine : 2.00 TB (251.43 GB free)
LaCie d2 quadra (button) 800mbit - 800mbit max
EFI (disk2s1) <not mounted> : 210 MB
2T Photo's & Video (disk2s2) /Volumes/2T Photo's & Video : 2.00 TB (944.02 GB free)
Gatekeeper: ℹ️
Mac App Store and identified developers
Kernel Extensions: ℹ️
/Applications/Toast 10 Titanium/Toast Titanium.app
[not loaded] com.roxio.BluRaySupport (1.1.6) [Support]
/Library/Extensions
[not loaded] com.microsoft.VirtualPC.Networking.1028 (7.0.3) [Support]
[not loaded] com.microsoft.VirtualPC.Networking.1040 (7.0.3) [Support]
[not loaded] com.microsoft.VirtualPC.OSServices (7.0.3) [Support]
/System/Library/Extensions
[not loaded] com.Belcarra.iokit.USBLAN_netpart (2.0.2) [Support]
[not loaded] com.Belcarra.iokit.USBLAN_usbpart (2.0.2) [Support]
[not loaded] com.Logitech.Control Center.HID Driver (2.6.0) [Support]
[not loaded] com.RemoteControl.USBLAN.usbpart (2.0.6) [Support]
[not loaded] com.aliph.driver.jstub (1.1.2) [Support]
[not loaded] com.elgato.driver.DontMatchAfaTech (1.1) [Support]
[not loaded] com.elgato.driver.DontMatchCinergy450 (1.1) [Support]
[not loaded] com.elgato.driver.DontMatchCinergyXS (1.1) [Support]
[not loaded] com.elgato.driver.DontMatchEmpia (1.1) [Support]
[not loaded] com.elgato.driver.DontMatchVoyager (1.1) [Support]
[not loaded] com.wacom.kext.wacomtablet (6.1.1) [Support]
[not loaded] com.wdc.driver.1394HP (1.0.8) [Support]
[not loaded] com.wdc.driver.USBHP (1.0.10) [Support]
/System/Library/Extensions/Belcarra.USBLAN_netpart.kext/Contents/PlugIns
[not loaded] com.belcarra.iokit.netpart.panther (1.6.1) [Support]
/System/Library/Extensions/Belcarra.USBLAN_usbpart.kext/Contents/PlugIns
[not loaded] com.belcarra.iokit.usbpart.panther (1.6.1) [Support]
/System/Library/Extensions/RemoteControl.USBLAN_usbpart.kext/Contents/PlugIns
[not loaded] com.RemoteControl.USBLAN.panther (1.6.1) [Support]
/Users/[redacted]/Desktop Pictures/Icons/ /WD Firmware Updater v2.1.9.0.app
[not loaded] com.wdc.driver.WdDeviceType00 (1.1) [Support]
/Users/[redacted]/Library/Services/ToastIt.service/Contents/MacOS
[not loaded] com.roxio.TDIXController (2.0) [Support]
Launch Agents: ℹ️
[invalid?] com.wacom.wacomtablet.plist [Support]
Launch Daemons: ℹ️
[loaded] com.adobe.fpsaud.plist [Support]
[loaded] com.microsoft.office.licensing.helper.plist [Support]
User Launch Agents: ℹ️
[loaded] com.adobe.ARM.[...].plist [Support]
[loaded] com.google.keystone.agent.plist [Support]
[running] com.mlbam.nexdef.plist [Support]
[running] com.netputing.airprintactivator.plist [Support]
[invalid?] com.swarmcast.mlbnexdefautobahn.plist [Support]
User Login Items: ℹ️
SoundTouch music server Application (/Applications/SoundTouch/SoundTouch.app/Contents/MacOS/SoundTouchMusicServer/S oundTouch music server.app)
EarthDesk Core Application (/Users/[redacted]/Library/PreferencePanes/EarthDesk.prefPane/Contents/Resource s/EarthDesk Core.app)
EarthDesk Core Application (/Users/[redacted]/Library/PreferencePanes/EarthDesk.prefPane/Contents/Resource s/EarthDesk Core.app)
Internet Plug-ins: ℹ️
WacomNetscape: Version: 1.1.0-5 [Support]
Default Browser: Version: 600 - SDK 10.10
Flip4Mac WMV Plugin: Version: 2.4.2.4 [Support]
WacomSafari: Version: 1.0.1 [Support]
RealPlayer Plugin: Version: Unknown [Support]
Silverlight: Version: 5.1.10411.0 - SDK 10.6 [Support]
FlashPlayer-10.6: Version: 16.0.0.235 - SDK 10.6 [Support]
Flash Player: Version: 16.0.0.235 - SDK 10.6 [Support]
QuickTime Plugin: Version: 7.7.3
iPhotoPhotocast: Version: 7.0 - SDK 10.8
SharePointBrowserPlugin: Version: 14.4.3 - SDK 10.6 [Support]
AdobePDFViewer: Version: 9.5.5 [Support]
CouponPrinter-FireFox_v2: Version: Version 1.1.6
GarminGpsControl: Version: 4.0.3.0 Release - SDK 10.6 [Support]
JavaAppletPlugin: Version: 15.0.0 - SDK 10.10 Check version
User internet Plug-ins: ℹ️
WebEx: Version: 1.0 [Support]
WebEx64: Version: 1.0 - SDK 10.5 [Support]
Google Earth Web Plug-in: Version: 7.1 [Support]
Safari Extensions: ℹ️
Keeper - Password and Data Vault [Installed]
Add To Amazon Wish List [Installed]
3rd Party Preference Panes: ℹ️
EarthDesk [Support]
Flash Player [Support]
Flip4Mac WMV [Support]
Logitech Control Center [Support]
MacFUSE [Support]
TiVo Desktop [Support]
Time Machine: ℹ️
Skip System Files: NO
Auto backup: YES
Volumes being backed up:
2T Photo's & Video: Disk size: 2.00 TB Disk used: 1.06 TB
Macintosh HD: Disk size: 999.35 GB Disk used: 470.68 GB
Destinations:
Time Machine [Local]
Total size: 2.00 TB
Total number of backups: 68
Oldest backup: 2014-03-22 15:08:16 +0000
Last backup: 2014-12-28 16:37:12 +0000
Size of backup disk: Too small
Backup size 2.00 TB < (Disk used 1.53 TB X 3)
Top Processes by CPU: ℹ️
15% backupd
8% com.apple.WebKit.Networking
2% coreservicesd
2% WindowServer
1% AddressBookSourceSync
Top Processes by Memory: ℹ️
296 MB mds_stores
296 MB Safari
245 MB EarthDesk Core
142 MB Mail
90 MB WindowServer
Virtual Memory Information: ℹ️
3.99 GB Free RAM
4.45 GB Active RAM
3.37 GB Inactive RAM
1.07 GB Wired RAM
7.92 GB Page-ins
2 MB Page-outs
Diagnostics Information: ℹ️
Dec 28, 2014, 01:48:01 PM /Library/Logs/DiagnosticReports/Aperture_2014-12-28-134801_[redacted].hang
Dec 28, 2014, 12:30:56 PM Self test - passed
Dec 27, 2014, 03:32:39 PM /Library/Logs/DiagnosticReports/backupd_2014-12-27-153239_[redacted].cpu_resour ce.diag [Details]
Dec 27, 2014, 03:29:58 PM /Users/[redacted]/Library/Logs/DiagnosticReports/fontd_2014-12-27-152958_[redac ted].crash
Dec 27, 2014, 03:29:55 PM /Users/[redacted]/Library/Logs/DiagnosticReports/fontd_2014-12-27-152955_[redac ted].crash
Dec 27, 2014, 03:17:56 PM /Library/Logs/DiagnosticReports/Kernel_2014-12-27-151756_[redacted].panic [Details]
Dec 26, 2014, 12:21:45 PM /Users/[redacted]/Library/Logs/DiagnosticReports/fontd_2014-12-26-122145_[redac ted].crash
Dec 26, 2014, 12:21:43 PM /Users/[redacted]/Library/Logs/DiagnosticReports/fontd_2014-12-26-122143_[redac ted].crash -
MSI K8n NEO4F (ver 1) bios 7125ncg
ENERMAX Whisper EG465P-VE FMA(24)
nVidia 7600GS 256MB
OCZ EB DDR PC-4000 /500MHz
Win XP Pro w/SP2
AMD 3700+ (939)
The video will work, correctly, in safe mode only. Using latest nVidia drivers.
Boots fine till we hit the log on screen then monitor goes black with no signal.
Can boot to safe mode fine. Removed drivers, ran driver cleaner, rebooted to safe mode and ran driver cleaner again.
Booted to safe mode again to install driver package to same result in normal windows (blank screen)
Wondering if card may be faulty as the screen does not look quite right when booting using only windows native drivers. I can pull an identical card from rig in sig to test. Just looking for suggestions here.
Thanks
lbiel
Quote from: BOSSKILLER on 18-November-07, 06:06:42
hit "F8" after bios post, and choise "Enable VGA Mode". boot normally and setup correct refresh rates.
check dual view & TV out settings too.
I had tried that once and resolution was VERY low and only 4 colors. Just 2 options each to change and the slider and drop down menu would not except the change and or move. Windows tried to adjust on it's own and the screen had a greenish tint to it. Still looked better in safe mode and booting normally was OK except for low res and color.(Still greenish)
I'm gonna swap the card out tomorrow morning
Maybe you are looking for
-
Contacts NOT in Address Book Syncing to iPhone
Long story short, I created a distribution list for my father in law with 800 addresses in it. Then deleted all the cards and distribution list. They still show up in my iPhone, no matter what I do. I have tried the following: #1 Confirmed they are n
-
IPad won't print to hp with AirPrint, was working fine earlier!
My hp printer worth AirPrint isn't printing from my iPad and iPhone. Has been working fine until tonight. I have rebooted the router, printers, ipad2 and the iPhone. Still won't print.
-
Source system in Virtual Info provider
Hi!! I am creating an application which is based on virtual infoprovider and which read data from website and produce data for reporting but i am confused about logical system name as cube is not executing in listcube transaction.!!! Regds, Pooja
-
I need help im trying to use free trial of Photoshop
Ok so... I let something load, and now on my desktop there is a icon that says "Start Download" and "Adobe CS4" and I double clicked the Adobe CS4 and I clicked on photoshop, then clicked on Adobe CS4, then it came up with a list of things and I clic
-
ITunes 10.4 looks awful... is it meant to?
Hi, Just installed the iTunes 10.4 update and it has caused to to revert to that ugly ugly itunes 8 look... the battleship grey window background has come back and the close/minimalize/zoom buttons have migrated back to the horizontal position at the