Display only one variable in the header and not column in WAD

Hi All,
my requirement is to be able to display only one variable in the report output header and hide the others. I am able to display all by using the INFO FIELD ITEM and saying variable display ON - but the requirement is very specific for only one variable display.
how can i achieve this ?
Thanks,
Shweta

Hi,
You can insert a text item and Turn off the others or Hide these from Filter pane I have done that and then use that query for your WAD.
Steps:
1. Uncheck all the variables from your Design item in Analyzer.
2. Insert a New Text Item and check the Variable you want to display.
3. Go back and run the Query.
Even you can change the position in the Query and Save as a workbook.Let me know ,if this works.
~AK

Similar Messages

HT201272 wait just to be sure i am not the only one who has the "term and conditions" problem

wait just to be sure i am not the only one who has the "term and conditions" problem

Go to Crucial.com and use one of their two methods to determine what upgrades are available for your Mac:
I would purchase the modules from Crucial as they are very reliable and wiill work with you if you have problems.
OT

Why can one mac access the internet and not the other?

Hi I have just installed a 2nd generation Airport Express base station. I have setup a network and I can connect to it to access the web. Here's the rub, only my Macbook Pro can connect. My Macbook Air cannot connect? A weird error message says (translated from Swedish): Airport has the selfapplied/selfselected IP adress 169.254.67.130 and will not be able to connect to the internet.
Why can one mac access the internet and not the other? Is there something simple that I can do to get more macs to be able to use my Airport Express to access the internet?
Tech details:
Airport Express 2nd generation (just purchased) model 1392
Macbook Pro running 10.8.2
MacBook Air running 10.6.8

It seems the Airbook assigns a dummy IP address so somehow it doesn't reach and receive an IP from the Express. I deleted the previous Express setting restarted the Air connected again, restarted the modem, restarted the Express nothing....
I spoke to the internet provider and the cable modem does not require any username or pw. from the modem to the cable it's one public ip, pure internet is flowing from the modem to the Express but the express doesn't seem to assign any IP address apart from the one assigned to the Macbook Pro.
Do you need a screendump of the settings on the functioning Mac or the faulty one? What settings are you interested in i.e. which tab should it shot?

My email is only displaying the header and not opening

When I get my emails from the server(Comcast) it only shows an unopened header. I have to double click on the email to open it then it opens to a page that states that "only the headers for this message has been downloaded from the server" and I need to double click on "Download the rest of the message" in blue.
Is there a setting to fix this?

IMAP mail accounts download headers and then when you select an email it will download a copy of the folder to a temp folder to make it quicker to get emails.
If you sychronise the folder then it will download a copy of the folder into Thunderbird profile. This folder will keep synchronizing to update the Thunderbird with what is on the server. When you move, delete etc any emails they will be moved/deleted off the server as the folders are one and the same and they synchronise to reflect changes.
* https://support.mozilla.org/en-US/kb/imap-synchronization#w_synchronization
then scroll down to section:
'Configuring synchronization and disk space usage'

My Display Only Works Part of the Time and Apple Care Won't Help Me (Long)

I bought my computer at a discounted price because it was a restocked item, but was it really worth it? I'm beginning to think not. I saw that it had one stuck pixel, but saving that much money on such an expensive computer, the pixel hardly seemed like a travesty. However, I think I've discovered the real reason why the last owner gave up such a seemingly exceptional piece of hardware...
After about a month of flawless operation my "new" computer started to act a little strangely. It wouldn't always go to sleep when it was scheduled, the screen saver wouldn't always come on by itself...things that I though a simple PRAM reset, SMC reset, or disk permission repair would fix. After countless attempts at all three "fixes" I was still having problems...a few days after these problems started occuring something even more drastic happened: My computer would turn on (the little light would come on, I'd hear the fans start running and the start up tone) but the screen would remain black. I tried several PRAM and SMC resets as suggested on this forum, but the screen continued to come up black for about an hour. That's when I called Apple.
The Apple Care specialist on the phone asked me for the serial in which I had to lift the computer up to get (since I obviously couldn't read it off the screen). She suggested an SMC reset which, I explained to her, I had tried already but it hadn't worked, however, I was willing to give it another shot. Oddly (and rather annoyingly) enough it worked, and for a short amount of time I was happy...until it happened again...another call to Apple...and again...and about 3 or 4 calls to Apple Care later, they suggested that I go in to an Apple Store to have it looked at.
The Apple Specialist made an appointment with me to meet with an Apple Genius the next day at 4:30PM at a store about a mile away from my house. The next day I lugged my 24" iMac through the local mall (I'm female, 5'2", and I weigh about 108 so it wasn't too easy of a feat) to discover the apple store was CLOSED for the next few days so that they could "make the store better." I called Apple Care on my cell phone right there in the mall and asked them what was going on. Didn't they know that this Apple Store was closed? The man I was talking to said that they knew and he wasn't sure how the person I had talked to just the day before had signed me up for an appointment when he hadn't even asked for my e-mail address. It was most bizarre. This man made an appointment with me for later that same day at an Apple Store about 45 minutes away from where I live. I didn't want to go, but I'm a college student and I was a desperate for my computer to work again.
Shaking around in that box must have brought it out of it's strange seized-up state because as I brought it out for the Mac Genius to look at it turned on for him no problem. Quite a frustrating problem because it's so spontainious that it keeps making me look like either a liar or a fool. He said he'd run an 8-hour diagnostic check on it and I could pick it up the next day. So the next day I waited for their call but I got none. I called them and they said that they were still running tests and it'd be ready the next day. The day after, about an hour and a half before I had to go to work, they called me and told me my computer was ready. They said they had ran a 24-hour diagnostic and everything was working fine but they said they'd run more tests if I wanted them to. I'm a full-time college student and I need my computer for just about all of my classes, so I declined more tests and told them I'd pick it up right away. I dashed over there to pick it up and dashed back as fast as I could (and I even made it to work on time...but just barely). Later that night I found that they had accidentally left their diagnostics CD in my computer (I called them about it and they said that would like it if I would bring it back...I still haven't mailed it).
All was fine and good (well, just okay...it still had problems with its sleeping and screen-savering) with my computer until yesterday. I got that black screen again upon start up....but this time my "fixes" worked after a few tries. There were no more problems for the rest of yesterday.
However, today I came home from school and go to start up my computer and the screen turned on and I saw the little mac symbol and that little circle of bars...but then it froze. I held in the little button to force a shutdown and when I started it back up again I was greeted by my good old friend, Mr. Black Screen. Just wonderful. I tried my "fixes" but today I didn't get lucky. So while I was holding in the button to start up my computer (again) and give it another go, I held it longer than I was supposed to and the little on light began flickering. Then I heard this unpleasant tone that lasted a few seconds before stopping and treating me to the startup sound. This time the screen turned on. Yay! I go to call Apple to find out what I had just done, and I find out that my 90 days are up and unless I wanted to pay $50 for them to be puzzled by my issue once more or give them $300 for not quite 3 more years of service, I'd have to lug my computer to an Apple Store or post here to get help. Thanks a lot Apple Care.
My "new" computer cost me almost $3,000. It should work the way it's supposed to. I need it to last me no less than 6 more years, but with the problems I've had with it in the first 3 months (which seem only to be getting worse and more frequent), I don't know if I'm expecting WAY too much out of it. I've been a loyal Apple user for 13 years and out of the 5 computers I've had in that time I've never had so many problems (actually I've never had any problems, at least nothing really serious; I'd never even called Apple Care before this). I'm a fairly experienced user (I'm not a Mac Genius or anything, but I know the ropes) and I am sure this is not normal behavior for an Apple computer (or any computer of that matter).
I'm so frusterated I'm not sure what to do. What's wrong with my computer? How can I get Apple to help me? How can I get Apple to even believe me? Any advice would be greatly appreciated and thank you so much for reading my very long (and rather dramatic) story.

Thanks for reading and thanks for the advice. Perhaps I'll ask them about it next time this problem occurs, although carrying the thing through a mall that is only about a mile away is the least of my worries. I'll do if it is both free (I don't make enough at my job to pay for such a service) and relatively speedy, although I'd hate for them to come over and for the computer to work properly (as bad as that sounds). It'd be a wasted trip and nothing would get fixed.
I'm contemplating videotaping myself performing my "fixes" on it the next time I have this problem.

My incoming emails only show the header and not the content

My incoming emails on my ipad only show the header when I open them, not the content or any attachments. This has not always been the case - I used to receive them normally. In the list of incoming emails, the first few words of the text appear, but when I open them, they are blank. Any suggestions?

Try a reset:
1. Hold the Sleep and Home button down (together)
2. For about 10 seconds
3. Until you see the Apple logo (very important)
4. Ignore the red slider

How do I get iTunes Match to upload my music library from my external hard drive? It only got some of the music and not a lot of it at that.

I'm trying iTunes Match and not having a great time of it so far. It only got a fraction of my music from my music library. I contacted support and they told me that it would recognize my external hard drive and take all of the music. My collection is all from CDs with the exception of a few from iTunes. I just want more of my collection to be available.
Can anyone help with that

The issue is not related to the external drive. iTunes Match has difficulties matching tracks ripped fom CDs because they may differ slightly from the versions on sale in iTunes. You can try the match again. Otherwise do a search of this forum. There are already many discussions on this subject here that may help you.

How do you set the remote only to work with the MacBook and not the Hi-Fi.

I have a Hi-Fi Apple stereo hooked up to my Macbook but when I use the Apple remote, it controls both things.
So if I am scrolling through my music in Frontrow then the volume on the Hi-Fi stereo is turning down or up depending on which way I am scrolling.
My question is:
How do I make the remote work with only my MacBook?

Pair the remote with your macbook by isolating it point the remote at it while holding down the menu and next buttons. You see like a chain appear and that will mean the remote is paired. Now only the macbook will only respond to the macbooks remote. Do the same with the Hi-Fi remote and now the hi-fi will only work with the hi-fi remote.

Orchestrator Console: Only use windows security promt one time for the console and not for the webservice

Hi there,
I have read the topics about the 2 windows Security Prompts. When I add the Console Website to my trusted internet sites, and use automatic logon to my intranet. Both prompts are gone. But that is not exactly what I want to achieve.
Is it possible to retain the first prompt (Authenticate Orchestration Console) but to disable the second prompt (Web service). I have tried to change the IIS Authentication Settings of 'Microsoft System Center Web Service Home' or 'Microsoft System Center
Web Service Home/Orchestrator2012 Home' from 'Windows Authentication' to 'Anonymous' authentication using the application pool Identity. This gives me the following error:
Does someone have been able to only preserve the fist prompt? Looking forward to you reply.

Hi there,
I have read the topics about the 2 windows Security Prompts. When I add the Console Website to my trusted internet sites, and use automatic logon to my intranet. Both prompts are gone. But that is not exactly what I want to achieve.
Is it possible to retain the first prompt (Authenticate Orchestration Console) but to disable the second prompt (Web service). I have tried to change the IIS Authentication Settings of 'Microsoft System Center Web Service Home' or 'Microsoft System Center
Web Service Home/Orchestrator2012 Home' from 'Windows Authentication' to 'Anonymous' authentication using the application pool Identity. This gives me the following error:
Does someone have been able to only preserve the fist prompt? Looking forward to you reply.

How can you display only one artboard in the Navigation Panel?

I would like to be able take advantage of the Navigation Panel as a thumbnail view of the artwork I am illustrating. The Adobe Illustrator file has 5 art boards. Is there an option in the Navigation Panel to view the art board I am working with, alone?

> That could work if all of the group items were the same size.
Why would that matter? Each GroupItem has its own controlBounds, height, width, position properties. Each Document has its own height, width, pageOrigin properties. The script would reference those properties to position the Group in the center of the document.
JET

I use i-tunes for backing tracks with an acoustic band...how can I get a playlist to play one song at a time and not go to the next one until I manually select it?

I use i-tunes for backing tracks. How can I set up a play list to play only one song at a time and not go to the next one until I manually select it?
Thanks

Uncheck all the songs in the playlist. iTunes will then play one song and stop.
Regards.

Need to remove the header and footer regions on one page

Hi,
I have a requirement to remove the header and footer regions on one page only. The regions I'm referring to contain the following:
Header:
Company logo, Home link, Logout link, Preferences link
Footer:
Copyright info, Privacy Statement, Home link, Logout link, Preferences link
These are the standard Oracle header and footer regions/page items, so I am not specifying a particular page name, although it would be the create time cards page we want to modify.
Also, we only want to remove these regions/items from ONE page, not an entire responsibility.
Any help is greatly appreciated.
Thanks!
Suzanne

Hi,
In order to hide,
Home link, Logout link, Preferences link
Use this code in the processrequest of the controller on the page on which you want tohide these
OAPageLayoutBean page = pageContext.getPageLayoutBean();
page.prepareForRendering(pageContext);
page.setGlobalButtons((oracle.cabo.ui.UINode)null);
And for hiding the Copyright info, Privacy Statement:
Click on Personalise page link
then Click on Choose Context
Choose "OAFooter" as Scope
and click "Apply"
and then Personalise the Copyright and Privay Statememnt icon and set rendered as False.
Thanks,
Gaurav
Edited by: Gauravv on Aug 25, 2009 8:36 PM

I want to display a url link in only one tab of the tabstrip in webdynpro ?

I want to display a url link in only one tab of the tabstrip in webdynpro view? How do we do this?

so in that tab of the tabstrip use LinkToUrl UI
The LinkToURL UI element is a hypertext link. When you choose this link, you are directed to a user-defined Web resource (URL).
The LinkToUrl is used to exclusively to open URLs in a separate window. To leave the Web Dynpro application and display a new URL use an exit plug.
1.in ur UI create tabs as u desire
2. In each TAB , add ViewContainer . ViewContainer you would be able to add inside tab.
3. Now create as many views as you have created Tabs.
4. Embed views into the corresponding ViewContainers , in ur first view embed link to URL
refer SAP online help for tabstrip :
http://help.sap.com/saphelp_erp2005/helpdata/EN/e8/ac884118aa1709e10000000a155106/content.htm

I can only hear sound from one side of the head phone

I've plug in my bass guitar through a cord and a converter in the line in port on my PC. Then checked 'listen to this device' (head phone) which is connected properly as it worked perfectly when I play any sound in ma PC. But when I play my guitar, I can
only hear it from one side of the head phone. How to fix it!?

Is that compatible to give output from both sides (R + L) ? Can you check same thing on other system ?
Arnav Sharma | http://arnavsharma.net/ Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading
the thread.

Hi, I have apple account/password on laptop but can't use the same ID etc on new Ipad. On my account it says ID is only for 1 system. I really want only one ID for both Ipad and laptop. Thanks

Hi,
I have apple account/password on laptop but can't use the same ID etc on new Ipad. On my account it says ID is only for 1 system. I really want only one ID for both Ipad and laptop.
Thanks

It seems that you have used the AppleIDs to "Purchase" your devices, which marries the two for all time and eternity.
For info - Using your Apple ID for Apple services
For Account security issues - Apple ID: Contacting Apple for help with Apple ID account security
regards
CCC

Display only one variable in the header and not column in WAD

Similar Messages

Maybe you are looking for