Display Only Screen design
Hi,
I have created a screen layout wherein all fields are marked for display only. I assigned this screen layout in a functional authorization for buyers. When I checked, there are still fields left editable such as:
1. Purch Org
2. Company Code
3. Conditions
4. Line Item number
5. All fields in account assignment tab of line item
I want all fields to be display only. How will I do it?
Hi Jackie,
If you need all the fields to be in display mode assigned to the buyer. Remove the Authorization of ME21N from the user using the T Code SU01.
Regards,
Bijoy Kumar
Similar Messages
-
Display Html screen, design view and CSS screen at the same time ?
Hello everyone !
Well this is my problem :
I am on a Dual Screen monitor, in one screen i have the ''code inspector'' to view my html code and the second screen i have the Design view.
Problem is, i hate switching always my tabs when I need to work on my Html and my CSS.
I was wondering if anyone found a way to display, i don't know maybe 2 code inspector or simply find a way to split the screen so I can see html and css at the same time ?
Thanks a lot !
NickIf you're using Dreamweaver CS4, this is very easy. View the HTML in the Code Inspector, and have Vertical Split view in the main Document window. In the Related Files toolbar, select the stylesheet.
-
Battery , time , signal strength bar is not getting displayed in home screen , these will be displayed only when i click on any app. Can u let me know the setting change ?
Did you check the Zoom setting?
Have you tried a reset (reboot)? Hold HOME and SLEEP until an Apple logo appears.
If it isn't Zoom and a reboot doesn't help try Settings/General/Reset - Reset all settings -
Cannot display the screen of my macbook on TV. OS is Lion 10.7.2. The Macbook is connected to the TV is over HDMI cable. TV shows only the backgroud picture of the Lion OS and reacts even to mission control. Do you have any suggestions for help ?
You have the display set in Extended Desktop mode. In System Preferences>Display on the MacBook screen there should be an Arrangement tab when you have the MacBook hooked up to the TV and both screens working. When you click the Arrangement tab do you see two monitors side by side? One of them will have a Menu Bar at the top. Just click on the Menu Bar and drag it to the second monitor. That will make the second monitor your main screen. You can now use your MacBook in Clamshell Mode with a wired or Bluetooth keyboard and mouse. http://support.apple.com/kb/HT3131 When you disconnect from the TV your Menu Bar will automatically change back to the MacBook.
Or if you want to work on the MacBook screen while showing it on a TV you can check the Mirror Display box on the lower left hand side of the Arrangement tab under the two monitors box. -
I have attached an image of the sheet to show the areas that are shaded. The building is supposed to be shaded, however the two squares within are not. These squares are not in the file converted to pdf and do not display on screen when viewing the pdf. Also there are several sheets in the set with shaded buildings and only two of the buildings have this issue. Any help with this would be greatly appreciated.
I'm seeing this same problem happen on multiple platforms here in the office. Every time this happens, the screen view does not show these shapes. I have been seeing the same problem except linework will be missing in one of these square shapes as well. Please give feedback if anyone knows what causes this problem. One thing to note - these squares are the size and placement of a selection box within acrobat. For example, if i use the selection tool and click near where the problem printed out, the shaded area that gets selected is in the exact same spot and is the exact size.@
-
Hi,
I try to create 2013 FY in "Setting for Each FY" in OKEQ - Maintain Versions unfortunately I have created Null FY, try to delete Null FY on the time it will ask Job schedule, I have cancelled the job & reopen Maintain Versions (OKEQ) screen on the time system populated the msg "Background Job still running - Data can be displayed only"
In Settings for Each FY screen there is no New Entries button, all FY are blocked status, changes was not allowed.
How can I resolve it.
Waiting for your valuable suggestions.
Regards,
Nageswar.Dear Rajneesh Saxena
Thanks for your prompt reply.
Yes you are correct, on the time of deletion it will ask Background Job Process, for immediate deletion must & should select "NO".
While "Settings for Each FY" screen populates message "Background Job Still Running - Data Can Be Displayed Only" open screen in display mode enter the command "=KILL" in command bar press enter, then you will allow to changes get New Entries button also.
Problem is solved
Regards,
Nageswar. -
Ship-to Address" screen in SRM browser need to change to display only
Hi Freinds,
Ship-To Address" screen in SRM browser needs to change to "Display" only. The users shouldn´t have the possibility to change the delivery address in the screen to their own private address.
Is it possbile to do any changes in SRM itself or else its purely JAVA HTML work.
Kindly i need you guys help to resolve the above development.
Regards
VivekHello Vivek,
Solution given by Suneel should be OK.
Nevertheless, if Ship-To must be only in display mode for all users (independently of their role) and only for particular document types, you can manage it with partner schema:
SAP Implementation Guide > SAP Supplier Relationship Management > SRM Server > Cross-Application Basic Settings > Define Partner Schema
Then maintain this partner schema ID to your concerned document type:
SAP Implementation Guide > SAP Supplier Relationship Management > SRM Server > Cross-Application Basic Settings > Define Transaction Types
Regards.
Laurent. -
ECM - Display only certain employees on Comp Planning Screen
Hi,
I'm trying to find a way to display only salaried non-production employees in the Salary Planning screen. Currently I get both salaried and hourly production employees.
Does anyone know of a way to omit the hourly production employees from the iView?
Also, is there a way to omit ineligible employees from the iView?
Many thanks
TonyHi,
Even we have the same issue. But we cannot modify standard FM due to business requirements.
Is it possible to filter from portal side?
Also, how did u achieved it by moifying the standard FM? Any details around it?
Any help greatly appreciated.
Thanks,
Santosh. -
TV Out Issue- No display of screen but only the audio sound can be heard
I have alway being using my iPhone 4 to watch my video/ mirroring by connected to TV (Sony) through 30-pin digital AV adapter, but after the upgrade of software to version 6.1.3 (10B329). During TV out, showing no display at screen but only the audio sound can be heard at background. Appreciated if there could be a update to fix this issue.
Thank you
Regards,
Devil38Thanks you. Problem is solved. The cable wasn't plugged in properly.
In spite of video rendering smoothly, audio started coming only when I disconnected the cable and plugged it in hard.
Perhaps I was pampering my phone too much
-3310
-N80
-N8 -
I am having major problems with Firefox. About 3 weeks ago I started experiencing the display only when on Firefox for all web site, that the display would be shifted right about half a screen. It only happens on Firefox and happens for all web sites.
This issue can be caused by the Babylon Toolbar 1.1.8 extension
Start Firefox in <u>[[Safe Mode]]</u> to check if one of the extensions is causing the problem (switch to the DEFAULT theme: Firefox (Tools) > Add-ons > Appearance/Themes).
*Don't make any changes on the Safe mode start window.
*https://support.mozilla.com/kb/Safe+Mode
*https://support.mozilla.com/kb/Troubleshooting+extensions+and+themes -
BEx Query Designer - Display only Resultrows
Hi,
I have a Question, is it possible only to display the yellow result rows of a query ?
My key figures are dependent from 3 Characteristics, like Partner, Treaty a.o. but I want to see only the Partner and the result row.
Thanks for help,
KarinHi,
If you want to display only result values without key figure values, choose properties of the keyfigure and give 'Suppress Result' in the place of "Calculate Single Value As" then you can suppress the keyfigure values.
If you want to display only results with out showing the characteristics, right click the char and give display as 'No Display'.
Vivek.V -
MuVo N200 screen displays only the Creative l
I have owned my Creative MuVo N200 for 3 years. Recently, it will display only the Creative logo. Although I know that music is loaded on there, the songs are neither displayed nor are they played. Is it time for a new MP3? What is the life expectancy anyways?
kungfookiller,
Try downloading the latest firmware update from website and use it to update and format the player. Remember to check the option 'Format Data Area'. Backup your player data first though.
Jason -
How to display a screen in selection-screen?
hi friends,
I have a requirement. I have one PNP database SELECTION-SCREEN in my report program. And i have created one more screen using screen painter.
Now i hae to display that screen which i created using screen painter under PNP SELECTION-SCREEN.
For ex:
PNP SELECTION-SCREE.
Pernr Number _______________
Employe Name _______________
Company Code _______________
Payroll Area ________________
Now after this i have to display my screen which i designed using screen painter.
As shown below.
O In rupees
O In Percentage
Variance______
Here i specified some fields only. some more fields also there.
For this i did as....
I created a BUTTON in SELECTION-SCREEN. And when the user clicked on this then screen will appear as window.
It's working fine.
It's look like this.
|More Selections...| -
> Button
But,my client required that screen also wants to display directly under PNP SELECTION-SCREEN but not as window and clicking button.
If Any Help.. Plz....
Thanks & Regards,
Shree.hi prakash,
thanks for ur solution.
but it's not working properly. while changing 1000 screen and activating, it's showing syntax error like this.
while changing:
==> Element PNPS$MCD touches or overlaps other element
==> Selection screen: Report generation makes screen changes ineffective
==> Element PNPS$MCD touches or overlaps other element
While Activating:
Syntax Error in Screen.
Program <myprogram name>
Screen 1000
Position Flow Logic Line 95
The include block has been used twice.
But, Here i clicked the button "Activate".
Then It's showing messages as this.
==> Selection screen: Report generation makes screen changes ineffective
==> Element PNPS$MCD touches or overlaps other element.
I checked out that Line 95.
There i am specifying my suscreen as this.
CALL SUBSCREEN subscreen1 INCLUDING sy-repid 106.
at end of PBO.
And in PAI.
CALL SUBSCREEN subscreen1.
Finally when i tried to execute it's giving DUMP.
Any solutions..
Thanks & Regards,
Shree. -
hi, I have lightswitch project that is growing up every day. Now it has 200 database table and about 450 default screens. When I first started the lightswitch project with few tables
(about 50 tables), it responses very fast. Gradually when I created the screens, the response takes 10 seconds for any changes I made in the screens or on the tables (*.lsml). Now, it takes 20 seconds (-+2 sec) to be able to do the next change!. For example,
changing the group name, entity input type, width, table summary property ,arrange fields in the groups, change display name (which I change the most),,etc. Just imaging that I can change 3 things on a minute! I am using lightswitch with VB coding , but no
programing codes (yet), I uses only HTML screens, no extensions, connected with SQL express 2012 (but I think that has nothing to do with the slowness since the problem is on the screens design time), I have created the project from scratch three times, with
visual studio 2013 ultimate update 3, update 4, and now with Update 5 CTP 1 !! Yet, the same result. Strange that the freezing time is always about 20 seconds!! Any idea why this is happening? Any resolution?! Regards, HasanHi Michael
again i appreciate your answer ...
i was trying to implement your suggested workaround of my problem, unfortunately, it won't work with me ! i cannot split the
project to smaller modules because of:
all screens are connected to each other's with buttons and clicks (view selected)
i have changed all the "display names" of tables fields (translation). i would have problem in translation whenever i
need to add tables or fields in the database, then i need to repeat that for all modules. i know that i can use other translation method, but i have already translated thousands of words !
i have spent 2 months in 2013 to learn MVC, but i did not like it. it is somehow complex for me. i am a volunteer developer (actually i
am network designer ).
i may lose the authentication , as i need to log-in to each module separately.
is there any root solution to this problem ; the VS Lightswitch (or IDE) slowness when there
is a lot of screens? maybe in VS2015?
i had great hopes for the lightswitch, and still it is the only IDE that i can use for the "Charity
ERP" project.
regards,
Hasan -
How to display only one row in report when...
Hi,
I've a report display in which i've 3 fields EBELN, LIFNR , MENGE. EBELN, LIFNR are from EKKO table and MENGE id from EKPO table .
On clicking the EBELN there will be getting another report in which we get EBELN,EBELP and MATNR and MENGE from EKPO table .
The problem is while displaying 1st report if the purchase order has two items in EKPO table then its displaying two times. How can i get only one time and the MENGE should be sum of those two item prices.hi use the statement not to get the multiple items..
sort itab by ebeln.
delete adjacent duplicates from itab comparing vbeln.
i will give u an example to get the total and subtotal ....
*& Report ZR_A1
REPORT ZR_A1
NO STANDARD PAGE HEADING.
Tables declarations
TABLES: VBAK, VBAP.
Variable declarations
DATA: C1 TYPE C.
Internal Table declarations*
DATA: BEGIN OF IT_VBAK OCCURS 0,
VBELN LIKE VBAK-VBELN,
VKORG LIKE VBAK-VKORG,
VTWEG LIKE VBAK-VTWEG,
SPART LIKE VBAK-SPART,
END OF IT_VBAK.
DATA: BEGIN OF IT_VBAP OCCURS 0,
VBELN LIKE VBAP-VBELN,
POSNR LIKE VBAP-POSNR,
MATNR LIKE VBAP-MATNR,
NETWR LIKE VBAP-NETWR,
BRGEW LIKE VBAP-BRGEW,
NTGEW LIKE VBAP-NTGEW,
END OF IT_VBAP.
DATA: BEGIN OF IT_FINAL OCCURS 0,
VBELN LIKE VBAK-VBELN,
VKORG LIKE VBAK-VKORG,
VTWEG LIKE VBAK-VTWEG,
SPART LIKE VBAK-SPART,
POSNR LIKE VBAP-POSNR,
MATNR LIKE VBAP-MATNR,
NETWR LIKE VBAP-NETWR,
BRGEW LIKE VBAP-BRGEW,
NTGEW LIKE VBAP-NTGEW,
END OF IT_FINAL.
Selection-screen design
SELECTION-SCREEN: BEGIN OF BLOCK B1 WITH FRAME TITLE TEXT-R01.
SELECT-OPTIONS: S_VBELN FOR VBAK-VBELN.
SELECTION-SCREEN: END OF BLOCK B1.
TOP-OF-PAGE.
FORMAT INTENSIFIED ON COLOR 5.
WRITE:/7 'LIST TO DISPLAY SALES ITEM INFO'.
START-OF-SELECTION.
Populating it_vbak table
SELECT VBELN
VKORG
VTWEG
SPART
FROM VBAK
INTO TABLE IT_VBAK
WHERE VBELN IN S_VBELN.
populating it_vbap table
IF NOT IT_VBAK[] IS INITIAL.
SELECT VBELN
POSNR
MATNR
NETWR
BRGEW
NTGEW
FROM VBAP
INTO TABLE IT_VBAP
FOR ALL ENTRIES IN IT_VBAK
WHERE VBELN = IT_VBAK-VBELN.
ENDIF.
populating the final list
LOOP AT IT_VBAP.
READ TABLE IT_VBAK WITH KEY VBELN = IT_VBAP-VBELN.
IF SY-SUBRC = 0.
MOVE: IT_VBAK-VBELN TO IT_FINAL-VBELN,
IT_VBAK-VKORG TO IT_FINAL-VKORG,
IT_VBAK-VTWEG TO IT_FINAL-VTWEG,
IT_VBAK-SPART TO IT_FINAL-SPART,
IT_VBAP-POSNR TO IT_FINAL-POSNR,
IT_VBAP-MATNR TO IT_FINAL-MATNR,
IT_VBAP-NETWR TO IT_FINAL-NETWR,
IT_VBAP-BRGEW TO IT_FINAL-BRGEW,
IT_VBAP-NTGEW TO IT_FINAL-NTGEW.
APPEND IT_FINAL.
ENDIF.
ENDLOOP.
SORT IT_FINAL BY VBELN.
LOOP AT IT_FINAL.
AT FIRST.
FORMAT INTENSIFIED ON COLOR 1.
WRITE:/35 'SALES DOCUMENT ITEM LIST'.
ULINE AT (100).
*endat.
FORMAT INTENSIFIED ON COLOR 5.
WRITE:/ SY-VLINE,
2 'SALES.DOCU.NO',
13 'ITEM',
21 'MATERIAL',
50 'NET-VAL',
65 'GROSS-WT',
82 'NET-WT',
100 SY-VLINE.
ENDAT.
FORMAT INTENSIFIED ON COLOR 2.
WRITE:/ SY-VLINE,
2 C1 AS CHECKBOX,
5 IT_FINAL-VBELN,
13 IT_FINAL-POSNR,
21 IT_FINAL-MATNR,
41 IT_FINAL-NETWR,
56 IT_FINAL-BRGEW,
71 IT_FINAL-NTGEW,
100 SY-VLINE.
AT END OF VBELN.
SUM.
FORMAT INTENSIFIED ON COLOR 3.
WRITE:/ SY-VLINE,
30 'SUB-TOTAL:',
41 IT_FINAL-NETWR,
56 IT_FINAL-BRGEW,
71 IT_FINAL-NTGEW.
WRITE:/100 SY-VLINE.
ENDAT.
AT LAST.
SUM.
FORMAT INTENSIFIED ON COLOR 6.
WRITE:/ SY-VLINE,
30 'GRAND-TOTAL:',
41 IT_FINAL-NETWR,
56 IT_FINAL-BRGEW,
71 IT_FINAL-NTGEW.
WRITE:/100 SY-VLINE.
ENDAT.
ENDLOOP.
regards,
venkat .
Maybe you are looking for
-
I have bough MSI B75A-G43 motherboard and four AMD AE34G1609U2-U memory modules (built by Patriot). In BIOS each of modules frequency shown as 1600, but memory frequency set to 1333, and no option 1600 provided in menu. I have updated BIOS to latest
-
Iwork'09 crashes after deletion of caches
I deleted my whole user caches folder by mistake and now iwork won't load. I tried re-installing it, then I tried reinstalling OS Lion, then checked software update and it still gives me the following error: Process: Pages [2688] Path:
-
I am curious to know whether we can do the following requirements using BW. These requirements are based on Scorecards. Below you can see the definition of scorecard. These requirements can be fulfilled by Business Objects but by any way we can do th
-
Xerox Accounting in an Open Directory
Hi there, I have a small network running with about 30 Workstations ( iMac 10.8.3 ) connecting to an Open Directory ( OSX 10.8.2 - Server 2.2.1 ) and I'm completely stumped trying to get accounting working on our Xerox Workstation ( 5775 ).. I previo
-
HR Appraisal Validation Customization for MAFinalRatingsPG, MAFRatingsRevPG
I am new to OA Framework customization. I have a requirement to ensure that all "Additional Details" for each "Objectives" are populated prior to allowing the appraisal to continue past the final Submit button at "Give Final Ratings: Review" page for