Display only turns on if the computer is shut while starting
My MBA is the best laptop i have ever had but when i turn it on the display wont turn on at all not even the apple icon on the back but if the computer is shut before the start up chime the the icon lights up and if i wait for it to turn off and the sleep button to come on and i open it the display lights up help please thanks
"Side Note" when i first got my MBA the display worked like a charm this only happened a few days after i installed my first apple updates
Battery Information:
Model Information:
Serial Number: DP-ASMB016-3889-210
Manufacturer: DP
Device name: ASMB016
Pack Lot Code: 0002
PCB Lot Code: 0000
Firmware Version: 0110
Hardware Revision: 0500
Cell Revision: 0102
Charge Information:
Charge remaining (mAh): 0
Fully charged: No
Charging: No
Full charge capacity (mAh): 0
Health Information:
Cycle count: 752
Condition: Check Battery
Battery Installed: Yes
Amperage (mA): 0
Voltage (mV): 9727
System Power Settings:
AC Power:
System Sleep Timer (Minutes): 10
Disk Sleep Timer (Minutes): 10
Display Sleep Timer (Minutes): 10
Automatic Restart On Power Loss: No
Wake On AC Change: No
Wake On Clamshell Open: Yes
Wake On LAN: Yes
Display Sleep Uses Dim: Yes
Battery Power:
System Sleep Timer (Minutes): 60
Disk Sleep Timer (Minutes): 10
Display Sleep Timer (Minutes): 60
Wake On AC Change: No
Wake On Clamshell Open: Yes
Display Sleep Uses Dim: Yes
Reduce Brightness: Yes
Hardware Configuration:
UPS Installed: No
AC Charger Information:
Connected: Yes
Charging: No
Similar Messages
-
Im traveling abroad and while I have refused the IOS7 upgrade my iPad is now lock. The display only reflecting iTunes and the USB cable images. Now I can not access my photos and or my email. Anyway I can reset without connecting to my computer?
penny175 wrote:
Anyway I can reset without connecting to my computer?
No. Not without access to a computer running iTunes. You do want to use your own computer so that you can restore from your backup and sync your own content back from iTunes. -
When turning on Macbook pro laptop I receive a blank screen for a few seconds, then a folder with a ? is displayed and remains as if the computer is now Frozen. Mac book Pro leopard operating system. What can I do to get past the freeze?
Could the disk have failed?
Can you hear it?
Boot from the install DVD and see what Disk Utility says. -
Display only one variable in the header and not column in WAD
Hi All,
my requirement is to be able to display only one variable in the report output header and hide the others. I am able to display all by using the INFO FIELD ITEM and saying variable display ON - but the requirement is very specific for only one variable display.
how can i achieve this ?
Thanks,
ShwetaHi,
You can insert a text item and Turn off the others or Hide these from Filter pane I have done that and then use that query for your WAD.
Steps:
1. Uncheck all the variables from your Design item in Analyzer.
2. Insert a New Text Item and check the Variable you want to display.
3. Go back and run the Query.
Even you can change the position in the Query and Save as a workbook.Let me know ,if this works.
~AK -
I have bought itunes songs on an ipad with my daughter apple id. i would like to back them up on the same computer I sync my iphone with using my apple id but they will not transfer. Both iphone and ipad have only been synced on the computer mentioned since they were purchased. Is there any way to get the ipad music transferred to the computer?
And they were definitely purchased from the iTunes store, they show on the account's purchase history (Store > View Account on a computer's iTunes, or you can view the last 90 days purchases via http://reportaproblem.apple.com) ?
You could potentially log into the account on that computer's iTunes (Store > Sign Out to log out of your account, that will then change to a Store > Sign In option) and redownload them by clicking on the id towards the top right of the iTunes screen and Purchased on the popup :
But that will potentially tie that computer to that account for 90 days : Manage your associated devices in iTunes - Apple Support
Or do you have a different computer that you could redownload them on and then copy them over to that computer via a flash drive or memory card, and then add them to its iTunes via File > Add To Library ? -
My daughter disconnected her iPod nano from the lead before ejecting the device. It no longer syncs and we have re-set the device, but it now only occasionally appears on the computer screen any suggestions please?
Restoring the iPod will do nothing to his iPhone.
When you restore it wipes the iPod clean no matter what computer you use.
The only plus to doing it form your home computer is if you have a backup stored there, then you can restore from the backup once it's done wiping.
If you are away form your home computer, go ahead and use the computer you have to restore it, then when you get home, you can restore form any backup you may find. You can use this to help you do that when you get there: http://support.apple.com/kb/ht1766 -
My mac wont turn on. It is charging and the on light is on when the computer is shut but once I open it the light turns off and the screen is black. I turn it off and then on again and the start up noise goes but it is still black - Help!?
Claire, please post your machine specs as requested. There are some variants of the MBP with specific hardware issues. Example: the older "silver key" MBPs with 2.2Ghz and faster processors can have a defective video chipset that produces a black screen or distorted video. That problem is covered under an Apple program that will fix this at no cost to you if you computer is that model.
Do "About this Mac" from your Apple menu and, in the resulting window, click the "More Info..." button. That launches System Profiler for you. The first screen looks like this:
The second line, "Model Identifier" (or "Machine Model" if you are running OS10.4) precisely identifies your MBP variant. Post that, and include it in your equipment info in your profile for future posts. That means people don't have to ask, and you get faster help that is targeted to your specific model. Saves everybody a bunch of keystrokes and you get better advice. -
i have an unknown message on my iMac telling me to turn it off, the computer has also frozen apart from that massage?
Sounds like a kernel panic.
What is a Kernel Panic?
http://support.apple.com/kb/TS3742
and http://support.apple.com/kb/TS1892?viewlocale=en_US
http://developer.apple.com/mac/library/technotes/tn2002/tn2063.html
More details here:
http://www.thexlab.com/faqs/kernelpanics.html
Useful articles on how to avoid and eliminate kernel panics here:
http://reviews.cnet.com/8301-13727_7-10344626-263.html?tag=mfiredir
http://www.macworld.com/article/2027201/how-to-troubleshoot-a-kernel-panic.html# tk.nl_mwhelp -
Is there any way to get an ipod to display only complete albums in the albums list?
is there any way to get an ipod to display only complete albums in the albums list (rather than every album represented by every song on the ipod)?
Sounds like there is some discrepancies in the tagging in iTunes. See this page for more information.
Grouping Tracks Into Albums
B-rock -
my iPhone fell in the pool, I tried the whole rice thing. & It seems to only turn on show the black screen with the apple & some white lettering on top of the apple. What else can I do to get my iPhone to work again?
Time to take it to Apple and pay for an out of warranty replacement.
Allan -
i have a 32G ipod touch and it doesnt want to charge, turn on, and the computer doesnt even recognize it, how do i fix this?!
- Seee if resetting the iPod will make it work or make it visiable in iTunes so you can restore it.
Reset iPod touch: Press and hold the On/Off Sleep/Wake button and the Home
button at the same time for at least ten seconds, until the Apple logo appears.
- Next see if placing the iPOd n recovery mode will make it visible in iTunes. For recovery mode see:
iPhone and iPod touch: Unable to update or restore -
I only get sound from the computer's speakers even though I put in headphones
I have for a while now had the problem that I only get sound from the computer's speakers even though i plug in the headphones, I have rebooted the computer but still the same problem occurs. So i thought there might be someting wrong in the settings, when i open the soundsettings and plug in my headphones nothing happens, usually I believe there should be a text appearing that says that the sound is now going to headphones, am I right? any how, it still just sends the sound out to the speakers and there is no option to send it else where then "soundflower 2ch and soundflower 16ch".
I do have an external sound card, for music recording, that goes through USB, and when i plug that in i get the option to send the sound to that device and also to recive sound and i can also choose if i want to sent it to the computer's speakers. So could it be someting wrong with the headphone jack?Good day!
Thank you for writing to the Dell Community Forum.
Boot into the System Bios and make sure that Onboard Devices- Integrated Audio is On. Then exit the System Bios saving the change. Once back into Windows, open the Device Manager and make sure that ADI1983 HDA appears under Sound devices. Then re-test the rear green audio jack #4 using headphones. Also, reply to this post with the service tag of the system sent via private message so that I can look into the details of the system and assist you better.
Have a great day ahead. -
my mail will not open after I click on mail.when I try to shut down my laptop ,it wouldn't telling that mail is preventing the computer from shutting down,asking to quit Mail and when I do mail dose not quit
Mail is open but it is frozen, being this the reason why you cannot open the Mail window. Press Alt, Command and Esc keys or go to > Force Quit, select Mail and force quit it. Finally, you will be able to turn off or restart the MacBook
-
Should the fan in my MacBook Air be running when the computer is shut and asleep?
Mine is, and this seems like a waste of battery life. I feel like the fan used to shut off when the computer was shut. But now, even when I close the MacBook, the fan still runs as fast as it did when the computer was open. Anyone know what the heck is going on here?
Yeah I think it is a Mavericks thing. Mine actually wasn't too bad. I closed the lid at night when my power was at about 52% and the fan kept going. I just went to bed, and in the morning, the fan had stopped, and my power was still around 51%, so it didn't eat any of my power like I thought it was going to. Mavericks must have the ability to cool your computer when needed even after you close it. It actually turned out to be not that big a deal.
-
My volume automatically turns itself all the way down whenever I start my ipod (even when I'm not playing music). As soon as I slide my ipod into opening the volume goes all the way down. Even if it's already completely off, the audio icon comes on the screen, which tells me the ipod is still trying to lower the volume. As I said, I don't even have to be listening to music. I can be on the opening screen. When I turn the volume back up, it immediatley turns it back down. It only doesn't go down if I physically hold my finger to volume bar on the touch screen.
And yes, I've updated all my software (on my ipod and laptop). I've also entirely reset my ipod twice.
Tell me, is it time to ditch the ipod and find some other sort of mp3 player (this is one problem at the end of a long list of less debilitating but equally annoying issues I've had with my 2 ipod touches)Yeah, I probably mean restore. Multiple times though!
Also, I forgot to mention that this issue persists regardless of whether or not my headphones are plugged in.
Maybe you are looking for
-
Error While Creating Namespace
Hi Experts, I Imported .TPZ File In to Our Newly Installed PI 7.0 server. when I am Trying to Create a New Name space Under this Imported Objects. It's Giving the Error Like <b>You cannot create new objects since the system is not the original system
-
X200: CPU frequency scaling not working in Windows 7 x64
Hi there, this is first posting here. Trust this issue has not been addressed before--if it has please redirect me to the post where this discussion happening. Here is my hardware: X200, P8700, 2.53GHz, 4GB RAM, 7454-32U I have just upgraded my RAM f
-
Fabricated ID numbers keep showing up
OK, in my long, very long quest to understand networking and it's quirks, I am again asking what do these entries mean. Below are outputs of a Terminal request to list all network activity. The only machine code identy that's mine is"00:14:51:ec:e9:0
-
[python] setting a variable in a loaded module from the main script
Hi, I have have two python scripts, one generally controlling my desktop wallpaper, the other downloads the APOD picture from the net and sets it as my wallpaper. At the moment I can get the wallpaper script to load the apod script as a module to use
-
Sending iOS camera stream to FMS
I'm currently developing an app that requires video conferencing for iOS. I've used a fairly basic approach with Flex that streams the camera and microphone on H.264 with Speex to FMS. It does actually produce a stream but I pressume the quality is s