Display Option For Previous 15" Unibody??

To start, I am not asking for advice on glossy vs matte. However, I prefer matte and would like to purchase the new 15" unibody MBP. I can decide to wait it out and see if Apple announces a matte option for the 15" MBP within the next few months or bite the bullet and get the glossy display.
*I could not find this information but did the previous 15" MBP Unibody have an option for matte finish (model previous to the WWDC update)?*
My thinking is that if there was an option, there is a chance they will introduce a matte option with the new 15" MBP unibody. If they did not have an option, I do not see them introducing a matte finish anytime in the near future.
Thanks

The previous unibody 15" MacBook Pro, launched in October 2008, didn't have a matte option. It had a glossy glass screen.
The new 15" MacBook Pros, launched in June 2009, still don't have a matte screen option.

Similar Messages

Is there a key on the MacBook Pro to toggle display options for a projector

I have had some difficulty getting my InFocus projector to consistently work correctly with my MacBook Pro. Is there a key on the MacBook Pro that toggles the options for projector display? There was one on my last MacBook and my previous PowerBook.
Thanks -
Dudley Warner

No, there is no longer a key to control external display modes (it's F7 on my 1st gen MBP, but the option was removed along with the embedded numeric keypad in the Early 2008 models). There's not a substitute keyboard shortcut (with the exception of installing a macro player like Keyboard Maestro). Your main option is System Preferences > Displays (as stated, ticking the box to show Displays in the menu bar provides a helpful shortcut).

NO-DISPLAY option for Radio buttons

Hi All,
I want to hide the 2 radio buttons on the selection screen using the NO-DISPLAY option. when i worked with that its giving an error like 'no-display and radio button group can be specified together'.
my question was is it possible to use NO-DISPLAY option with radio buttons?
Thanks
Kumar.

See this sample code
SELECTION-SCREEN BEGIN OF BLOCK b3 WITH FRAME TITLE text-h01.
*Radio button for Process PO invoice
PARAMETERS : rb_po RADIOBUTTON GROUP inv USER-COMMAND rad.
" PO Invoice
*Radio button for FI Invoice
PARAMETERS : rb_fi RADIOBUTTON GROUP inv.
" FI Invoice
*Radio button for Process PO & FI Invoice
PARAMETERS : rb_pofi RADIOBUTTON GROUP inv.
" PO & FI Invoice
SELECTION-SCREEN END OF BLOCK b3.
SELECTION-SCREEN BEGIN OF BLOCK b1 WITH FRAME TITLE text-001.
SELECTION-SCREEN SKIP.
SELECT-OPTIONS:
 s_bukrs FOR rbkp-bukrs, "Company Code
 s_ekorg FOR ekko-ekorg NO INTERVALS MODIF ID md2,
 "Purchasing Org.
 s_ekgrp FOR ekko-ekgrp NO INTERVALS MODIF ID md2,
 "Purchasing Group
 s_werks FOR rseg-werks NO INTERVALS MODIF ID md2,
 "Plant
 s_lifnr FOR rbkp-lifnr NO INTERVALS,
 "Vendor
 s_matkl FOR ekpo-matkl NO INTERVALS
 MODIF ID md1,
 "Material Group
 s_belnr FOR rbkp-belnr NO INTERVALS,
 "Invoice Number
 s_ebeln FOR rseg-ebeln NO INTERVALS MODIF ID md2,
 "Purchasing Document No
 s_gjahr FOR rbkp-gjahr NO INTERVALS,
 "Fiscal year
 s_budat FOR rbkp-budat NO INTERVALS,
 "Posting date
 s_blart FOR bkpf-blart NO INTERVALS,
 " Document Type
 s_bldat FOR bkpf-bldat NO INTERVALS,
 " Invoice Date
 s_usnam FOR rbkp-usnam NO INTERVALS.
"User
*Report type
SELECTION-SCREEN BEGIN OF BLOCK b2 WITH FRAME TITLE text-002.
SELECTION-SCREEN BEGIN OF LINE.
*Radio button for User Report
PARAMETERS : rb_user RADIOBUTTON GROUP za DEFAULT 'X' USER-COMMAND rad MODIF ID md2."User report
SELECTION-SCREEN COMMENT 3(20) text-003 FOR FIELD rb_user MODIF ID md2.
SELECTION-SCREEN END OF LINE.
SELECTION-SCREEN BEGIN OF LINE.
*Radio button for Managing Report
PARAMETERS : rb_man RADIOBUTTON GROUP za
 MODIF ID md2.
"Management Report
SELECTION-SCREEN COMMENT 3(20) text-004 FOR FIELD rb_man
 MODIF ID md2.
SELECTION-SCREEN END OF LINE.
SELECTION-SCREEN END OF BLOCK b2.
SELECTION-SCREEN END OF BLOCK b1.
AT SELECTION-SCREEN OUTPUT.
* Checking Radiobuttons and modifing Material Group field .
PERFORM f13000_check_radio.
FORM f13000_check_radio.
* When the FI button is selected hide the fields under group md1 and MD2
LOOP AT SCREEN.
 IF screen-group1 = 'MD2'
 OR screen-group1 = 'MD1'.
 IF rb_fi = c_x
 OR rb_pofi = c_x.
 screen-active = 0.
 ELSE.
 screen-active = 1.
 ENDIF.
 MODIFY SCREEN.
 ENDIF.
ENDLOOP.
* If the user output radiobutton is checked then make the screen
* input of Material Group off
 LOOP AT SCREEN.
 IF screen-group1 = 'MD1'.
 IF rb_user = 'X'.
 screen-active = 0.
 ELSE.
 screen-active = 1.
 ENDIF.
 MODIFY SCREEN.
 ENDIF.
ENDLOOP.
IF rb_user = 'X'.
* When display for material group is off
* then refresh the select option for material
* group
 REFRESH s_matkl.
ENDIF.
ENDFORM. " f13000_check_radio
hope this helps.

Multi display options for MBP using USB - Diamond BVU195 vs Sewell Minideck

I have narrowed my search for a multidisplay option for my MBP down to 2 devices;
Diamond BVU195
http://www.diamondmm.com/BVU195.php
http://www.amazon.com/Diamond-BVU195-Display-Adapter-included/dp/B002GHBW4S
and
Sewell Mindeck
http://sewelldirect.com/Sewell-Minideck-USB-to-DVI-Display-Adapter.asp
Has anyone had a chance to check out both of these?
There is no easy comparison, any opinions? thanks!

The obvious drawback of USB video adapters like these is that they tie up USB ports you may need for other purposes. If you intend to connect one or more such adapters to a USB hub instead of directly to the computer, be sure to use a hub that has its own AC power supply, and check with the adapter's manufacturer to make sure it has been tested with hubs and found to work that way.
The less obvious disadvantage of USB video adapters is slowness. If you don't use your multiple displays for gaming or other high-speed, demanding video applications, you may not be disappointed. If you do, you probably will be.

Is there a way you can select a display option for Safari pages on the OS5?

The tabbed version of Safari for the ipad2 is nice but the old one is better. Is there a way we can select a display option that lets a user toggle between the two?

No, Safari on the iPad in iOS 5 uses tabbed browsing. You can try leaving feedback for Apple : http://www.apple.com/feedback/ipad.html

Enabling / disabling / positioning Display options for EP 5.0 Header

Hello,
Does any one has an idea about changing (Hide/Show/change position) the display options(e.g:- Personalize: Page | Portal Log Off Add To Favorites, search bar....etc) in portal Header Area in case of EP 5.0.
Regards
Sunil Kulkarni
Note:- I would like to know, it for EP 5.0 SP 5.

Now,you have to press volume down or up to change sound settings.
All we have to decide is what to do with the time that is given to us - J.R.R. Tolkien

In 'Desktop' the display options for the chosen image have vanished.

I have an iMac with Snow Leopard.
Using the option 'Desktop' in 'Desktop and Screen Saver', on choosing an image, under the name ofm the image chosen, there is usually a list of options for how the image is displayed :-
Tile
Fuil screen
Fit to screen
These are no longer displayed. Where is the option for switching the list back on?
I have tried restarting.
Thanks in advance
David

Disconnect all devices from the computer then do the following:
Boot up from your Snow Leopard Install DVD while holding down the "c" key.
Select the language you wish to use, and then choose "Disk Utility" from the menu bar.
Your HD should appear in a panel on the left hand side of the window which opens. Select it and then click on the "repair disk" button in the right hand section of the window.
Once this process has been completed restart your computer and repair permissions directly from Disk Utility.
If Disk Utility is unable to complete the repair, you will need to use a stronger 3rd party utility like DiskWarrior, Techtool PRO (not Deluxe) or Drive Genius.
Please post back the results.

SAP XI runtime workbench doesnot display data for previous months

Hi,
We are experiencing an issue in our XI system. When we try to extract messages from the Integration engine we recieve data only for two months including the present month and not for previous months.
Can you pleaes suggest which SAP job or any set parameter is creating such a scenario.
Thanks in advance and suggestion are welcome.
Regards,
Subhram

You should check the archiving/deletion jobs in the PI Admin Check guide..
Kind regards,
Mark

Other display option for larger fonts?Is now1920 x 1200 on Imac 24

HI,
I have an IMac 24, the matte display, however I always had this resolution set to 1920 x 1200...
I wear glasses, always had probles with teh small type...
what is the next larger resolution, that I can set the display at,
without distorting the screen???
thanks

FYI, this is the discussion area for the much older iMac G4.
Since your iMac is an Intel-based iMac you should post your future questions in the Intel-based iMac discussion area.

Strange display issues for previously healthy SWFs

Many months ago I published SWFs via Xcelsius 2008 that were carefully tested and worked well. This week, it came to my attention that these SWFs are now displaying strangely under a variety of browsers and Flash Player versions (latest version tested was FP 9).
Symptoms of the problem include, as far as I can tell from just looking at the SWF, dynamic visibility not being respected and transparent objects losing their transparency. Hence, objects that are supposed to be hidden behind other objects, or objects that are not supposed to display, are doing the opposite.
The SWFs worked exactly as designed from last September up until this month, at some point. Has anyone else noticed anything like this?
I'm still trying to work out how I should go about root-causing this issue.

Hi,
I have this sort of issue not with swf but With XLF i have lost Complete Data in my XLF .The data tabs that were used to map the components were completly lost.So i always mantain backups at multiple locations which saved Me.
My suggestion would be here is Generate a new swf which was wokrking propelry last time.I think this will be fine..But the Symptons you are talking about it Quite strange and needs to look at it...
Can really understand what would be the reason for this.

Global display options for equal columns of different tables

Hi,
is it possible to create some kind of templates for tables which are nearly the same! I mean different table names, different content and some columns are equal.
e.g. I've got a a lot of Error tables, in every table there is a column named Reload Flag, which should be displayed as a List of value, can i set this by default. Or for example I've got a column named Error message and i display it as a standard report column, but i always have to edit the column formatting, because the column is very broad. I have to change the CSS Style ( {width:30em;} )!
THX Mat

Hi,
Yes, It must be working using rowid since its not mention anywhere, I could not post it. But I too think so.
check the below block
SQL> Declare
2 v_mydept1 emp.deptno%TYPE;
3 v_mydept2 dept.loc%TYPE;
4 CURSOR C1 IS SELECT e.deptno,d.loc
5 FROM emp e,dept d
6 WHERE e.deptno = d.deptno
7 and empno=7900
8 FOR UPDATE of e.sal;
9 Begin
10 OPEN C1;
11 LOOP
12 FETCH C1 INTO v_mydept1,v_mydept2;
13 Dbms_output.put_line(v_mydept2);
14 Dbms_output.put_line(v_mydept1);
15 EXIT WHEN C1%NOTFOUND;
16 UPDATE dept SET loc = 'NY' WHERE CURRENT OF C1;
17 select loc into v_mydept2 from dept where deptno=v_mydept1;
18 Dbms_output.put_line('Record updated '||v_mydept2);
19 End loop;
20 COMMIT;
21 End;
22 /
Declare
ERROR at line 1:
ORA-01410: invalid ROWID
ORA-06512: at line 16The logic doesnot make sense, but if you can notice the error speaks about rowid.
For update locks the specific rows listed in the cursor and Where Current Of Clause must be taking in account the rows as per thier ROWID.
Twinkle
Edited by: Twinkle on Apr 8, 2010 4:28 PM

Mobile data- not displaying option for email in settings - how do I get it to work?

Hi
In my settings I don't have the option under mobile data to add email, the only options are FaceTime and passbook- so I'm unable
To use 3G to access mail- does anyone know how I can fix this? Many thanks

You add your email accounts under Mail, Contacts, Calendars.

How many display options for Web Apps are there?

I know this is going to sound stupid,
But are there only 2 ways to show web apps?
Basically - I want to get links to auto populate on one web app, pulling just links to another web page (this web page is one of the fields in another web app), but automatically updated when the category of the "linked to" web app has another product linked to it.
I know what that reads like!
The only thing is - these are separate web apps.
The alternate/backup view of the first web app looks like this:
Currently - the user has to manually add the links like this:
Which is not ideal - I just want them to dynamically populate on the fly.
Is this possible?
Cheers, Dave

Funny you say that - as the most obvious things appear in your brain immediately after posting a question... Will see how that works...

Calendar display options

How can I change the display options for iCal on an iPad Mini? I hate to always having to scroll in weekly view and would like to see the whole day without scrolling.

angelwoman,
Apple has not made that a feature of the iOS Calendar App.
You may want to consider providing Apple - iPad - Feedback.

ITunes 7.0.1.8 Freezes Windows when Cover Browser display option selected.

When I select the Cover Browser display option for Music Library the entire operating system freezes within 3 seconds after the button is selected. After rebooting and deleting all music and selecting the option the freeze did not occur. I reimported a CD and tried again and the freeze occured again. ITunes works fine otherwise.
Compaq Presario 2100 Windows XP Pro
Compaq Presario 2100 Windows XP Pro
Compaq Presario 2100 Windows XP Pro

I setup a new user on the computer. The problem does not happen under new user.

Display Option For Previous 15" Unibody??

Similar Messages

Maybe you are looking for