Display options in 10.5.8 missing

I am runnung os 10.5.8 wiith cinema display. My power and brightness buttons have somehow become diabled. I read that they can be disabled in the system preferences display options. My problems is that the options button is nowhere to be found. Where has it been moved to and how can I enable the power and brightness buttons?

What size display?
Look at these links.
http://support.apple.com/kb/HT2810
http://docs.info.apple.com/article.html?path=Mac/10.6/en/8848.html
https://discussions.apple.com/thread/2649213?start=0&tstart=0
 Cheers, Tom

Similar Messages

Presenter Display Options Are Missing in Keynote 6?

I upgraded to Mavericks / Keynote 6 yesterday.
I have a dual monitor setup on my iMac27, and today when I'm trying to play a keynote presentation, it displays on the wrong monitor.
I seem to be unable to switch it to my primary monitor, because the "Presenter Display Options" tab (under preferences) that was present in the previous version is alltogether missing.
Anyone else have this issue, and a work-around?
Where are the "Presenter Display Options"?
Thanks, JB

Hi, everyone.
I, too, have encountered the same problem the first time I fired up Keynote to an external projector. After trying out all the suggestions posted here, I stumbled upon a simple remedy.
1. Ensure that the "Enable Presenter Display" checkbox is ticked under the "Slideshow" preferences tab of Keynote. I believe this is enabled by default.
2. Then right click the "Keynote" icon at the dock, and under "Options," assign to "None" or "All Desktops."
I found that this enabled Keynote to present my slides in the exact same way as the previous Keynote version did. Whether assigning it to "None" or "All Desktops" makes any difference or not, I cannot tell, but both options work. I hope this helps.

Full screen view missing from display options in b...

I've been trying to find out to switch off full screen on the browser on my 5230, it annoys the heck out me. According to the browser help there should be an option for full screen view in the display options of the browser, it's not there though and that makes me feel sad and angry and a little horny :-). Any help very much appreciated.

Look at this;
/t5/Nseries-Devices-and-S60/I-ve-lost-the-ability-to-turn-off-Full-Screen/m-p/695076#M210741
i think same is with 5230.
Previous Phones: 6600, 7610, 6230, 6230i, 1100, 1112, N70, N73, N95, N95 8GB, 5800XM, 5230, C5, iPhone 3GS, SE Xperia X10, N900, N8, SE Xperia Arc
Current Phones: Nokia N9, iPhone 4

Options - Text Editor - C/C++ missing intellisense entry. Intellisense not working

Options -> Text Editor -> C/C++ missing intellisense entry. Intellisense not working. Solutions to turn options for the editor off and on are not working. The intellisense entry is present for other languages,
such as C#, but not C/C++.
By not working, I mean the intellisense right click menu items are grayed out, and intellisense files are not produced.

Hi JerroldBrody,
Thank you for posting in MSDN forum.
>>I mean the intellisense right click menu items are grayed out, and intellisense files are not produced.
Based on your issue, could you please share me a screen shot about the intellisense right click menu items are grayed out?
Generally, I know that it is default that we can enable the intellisense for C/C++ by going to the TOOLS->Options -> Text Editor -> C/C++ ->Advanced-> IntelliSense like the following screen shot.
So please try to check if you set Disable Intellisense property as False in the VS IDE.
Best Regards,
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

Rich text box used in Infopath Form not displaying option to get images from Computer

Hello,
We have used "Rich text box" in Infopath Form which is not displaying option to get images from Computer.
Options available are : From Address, From SharePoint
But if we Rich text box in list, then it works fine with "From Computer" option.
can you please help me out to get this option.
Thanks in advance.
REgards,
Jayashri

Hi,
From your description, there is no “From Computer” option to get images with rich text box in InfoPath form.
Per my knowledge, by design there are “From Address” and “From SharePoint” options without “From Computer” option in rich text box in InfoPath form. As a workaround, you can develop a custom InfoPath Rich Text box to do it.
About developing a custom InfoPath control, I suggest you create a new thread on the forum “Visual Studio Tools for Office”, more experts will assist you with InfoPath development.
Visual Studio Tools for Office:
https://social.msdn.microsoft.com/Forums/office/en-US/home?forum=vsto&filter=alltypes&sort=lastpostdesc
Thanks,
Dean Wang

No Mirroring in Ipad 2? I have IPAD2 and Apple Tv 4.3. I can airplay videos/music from Ipad2 to my HDTV via ATV, but I cant mirror it. When I select airplay to switch from Ipad2 to Apple TV, Mirroring does not show as an option. What am I missing?

No Mirroring in Ipad 2?
I have IPAD2 and Apple Tv 4.3. I can airplay videos/music from Ipad2 to my HDTV via ATV, but I cant mirror it. When I select airplay to switch from Ipad2 to Apple TV, Mirroring does not show as an option. What am I missing?

That feature is not yet available, it is coming with IOS 5
http://www.apple.com/ca/ios/ios5/features.html

Calendar display options

How can I change the display options for iCal on an iPad Mini? I hate to always having to scroll in weekly view and would like to see the whole day without scrolling.

angelwoman,
Apple has not made that a feature of the iOS Calendar App.
You may want to consider providing Apple - iPad - Feedback.

I have a macbook air and and hdmi that i have used many times, but not all of a sudden the tv won't recognize the hdmi. The computer flashes when it is plugged into the hdmi but the tv says "no signal" and the airplay displays option says "no device"

I have a macbook air and and hdmi that i have used many times, but not all of a sudden the tv won't recognize the hdmi. The computer flashes when it is plugged into the hdmi but the tv says "no signal" and the airplay displays option says "no device detected" and the drop down bar is grey and locked.

I have a macbook air and and hdmi that i have used many times, but not all of a sudden the tv won't recognize the hdmi. The computer flashes when it is plugged into the hdmi but the tv says "no signal" and the airplay displays option says "no device detected" and the drop down bar is grey and locked.

Grouping to display null values for all the missing dates

Hi SAP,
I am trying to display '0.00' value for all the missing dates in my crystal reports as follows:
17-Jan-14     40.00
18-Jan-14       0.00
19-Jan-14       0.00
20-Jan-14     80.00
However, my crystal report is showing as follows:
17-Jan-14     40.00
18-Jan-14       0.00
19-Jan-14
20-Jan-14     80.00
The missing dates with no data are group together and my '0.00' value is not. Kindly advise me the solution. The formula is shown as per attached.
Thank you.
Regards.

Hi,
Thanks for your reply.
Fyi, I am using a formula field in crystal report to display "0.00" for days in between as follows:
whileprintingrecords;
if Days_Between({Command.DocDate},next({Command.DocDate}),'dd-MMM-yy') = "" then "" else "0.00"
There is another formula field in crystal report to display the missing dates in between as follows:
whileprintingrecords;
Days_Between({Command.DocDate},next({Command.DocDate}),'dd-MMM-yy')
Below is my report custom functions:
Function Days_Between (datefield as datetime, nextdatefield as datetime, format as string)
' This function is only used to display what data is missing within a specified date range...output type is text
dim thisdate as date
dim nextdate as date
dim output as string 'output is the text display
dim daysbetween as number
dim looptimes as number
looptimes = 0
daysbetween = 0
output = ""
thisdate = datevalue(datefield) + 1
nextdate = datevalue(nextdatefield)
if nextdate - thisdate > 1 then daysbetween = nextdate - thisdate else daysbetween = 1
do
if nextdate - thisdate > 1 _
then output = output + totext(thisdate, format) + chr(10) _
else _
if nextdate - thisdate > 0 _
then output = output + totext(thisdate, format)
looptimes = looptimes + 1
thisdate = thisdate + 1
loop until looptimes = daysbetween
    Days_Between = output
End Function
The issue arise when when there is more than one missing dates in between but the null values ("0.00") displayed is only for the first missing dates and not for all the missing dates.
Regards,
Ting Wei

ITunes 7.0.1.8 Freezes Windows when Cover Browser display option selected.

When I select the Cover Browser display option for Music Library the entire operating system freezes within 3 seconds after the button is selected. After rebooting and deleting all music and selecting the option the freeze did not occur. I reimported a CD and tried again and the freeze occured again. ITunes works fine otherwise.
Compaq Presario 2100 Windows XP Pro
Compaq Presario 2100 Windows XP Pro
Compaq Presario 2100 Windows XP Pro

I setup a new user on the computer. The problem does not happen under new user.

Document type wise PO with display & optional purchasing group.

Dear All,
we have six document type from NB1 to NB6 every document type has separate no ranges, & having three field selection as Me21n, fof, NBF,
in Spro MM Define screen layout at document level, in that we assign document type NB5 & attach field selection FOF in that purcahsing group is optional.
same other dovcument types we assign field selection Me21n & we assign purchasing group is Display option.
our requirement is that when i select documenyt type NB5, purchasing group will optional not in display.
But system shows display & we cant do PO.
Please guide me or any other config.
Thanks
Shital

Hi,
System is giving first preference to Field Selection Key ME21N, so you have to reverse the condition.
Maintain ME21N as optional and assign document type NB5 to it and
For other dovcument types Create another Field Selection Key with purchasing group as Display option and
assign that field selection key for purchasing group is Display option.
Regards

Document Display Options from portlet

How do I gain access to the user setting for the "Document Display Options" from a portlet? I want my portlet to honor this setting when creating links for the user to click on such that they open in a new window or in the main browser window as specified by this setting.
This option is set on the Display Options page of the My Account editor.
thanx!

Instead of using
<f:selectItem> use
<f:selectItems>.
Pass list to this componenet. is this your question?
Message was edited by:
KrishnaS

NO-DISPLAY option for Radio buttons

Hi All,
I want to hide the 2 radio buttons on the selection screen using the NO-DISPLAY option. when i worked with that its giving an error like 'no-display and radio button group can be specified together'.
my question was is it possible to use NO-DISPLAY option with radio buttons?
Thanks
Kumar.

See this sample code
SELECTION-SCREEN BEGIN OF BLOCK b3 WITH FRAME TITLE text-h01.
*Radio button for Process PO invoice
PARAMETERS : rb_po RADIOBUTTON GROUP inv USER-COMMAND rad.
" PO Invoice
*Radio button for FI Invoice
PARAMETERS : rb_fi RADIOBUTTON GROUP inv.
" FI Invoice
*Radio button for Process PO & FI Invoice
PARAMETERS : rb_pofi RADIOBUTTON GROUP inv.
" PO & FI Invoice
SELECTION-SCREEN END OF BLOCK b3.
SELECTION-SCREEN BEGIN OF BLOCK b1 WITH FRAME TITLE text-001.
SELECTION-SCREEN SKIP.
SELECT-OPTIONS:
 s_bukrs FOR rbkp-bukrs, "Company Code
 s_ekorg FOR ekko-ekorg NO INTERVALS MODIF ID md2,
 "Purchasing Org.
 s_ekgrp FOR ekko-ekgrp NO INTERVALS MODIF ID md2,
 "Purchasing Group
 s_werks FOR rseg-werks NO INTERVALS MODIF ID md2,
 "Plant
 s_lifnr FOR rbkp-lifnr NO INTERVALS,
 "Vendor
 s_matkl FOR ekpo-matkl NO INTERVALS
 MODIF ID md1,
 "Material Group
 s_belnr FOR rbkp-belnr NO INTERVALS,
 "Invoice Number
 s_ebeln FOR rseg-ebeln NO INTERVALS MODIF ID md2,
 "Purchasing Document No
 s_gjahr FOR rbkp-gjahr NO INTERVALS,
 "Fiscal year
 s_budat FOR rbkp-budat NO INTERVALS,
 "Posting date
 s_blart FOR bkpf-blart NO INTERVALS,
 " Document Type
 s_bldat FOR bkpf-bldat NO INTERVALS,
 " Invoice Date
 s_usnam FOR rbkp-usnam NO INTERVALS.
"User
*Report type
SELECTION-SCREEN BEGIN OF BLOCK b2 WITH FRAME TITLE text-002.
SELECTION-SCREEN BEGIN OF LINE.
*Radio button for User Report
PARAMETERS : rb_user RADIOBUTTON GROUP za DEFAULT 'X' USER-COMMAND rad MODIF ID md2."User report
SELECTION-SCREEN COMMENT 3(20) text-003 FOR FIELD rb_user MODIF ID md2.
SELECTION-SCREEN END OF LINE.
SELECTION-SCREEN BEGIN OF LINE.
*Radio button for Managing Report
PARAMETERS : rb_man RADIOBUTTON GROUP za
 MODIF ID md2.
"Management Report
SELECTION-SCREEN COMMENT 3(20) text-004 FOR FIELD rb_man
 MODIF ID md2.
SELECTION-SCREEN END OF LINE.
SELECTION-SCREEN END OF BLOCK b2.
SELECTION-SCREEN END OF BLOCK b1.
AT SELECTION-SCREEN OUTPUT.
* Checking Radiobuttons and modifing Material Group field .
PERFORM f13000_check_radio.
FORM f13000_check_radio.
* When the FI button is selected hide the fields under group md1 and MD2
LOOP AT SCREEN.
 IF screen-group1 = 'MD2'
 OR screen-group1 = 'MD1'.
 IF rb_fi = c_x
 OR rb_pofi = c_x.
 screen-active = 0.
 ELSE.
 screen-active = 1.
 ENDIF.
 MODIFY SCREEN.
 ENDIF.
ENDLOOP.
* If the user output radiobutton is checked then make the screen
* input of Material Group off
 LOOP AT SCREEN.
 IF screen-group1 = 'MD1'.
 IF rb_user = 'X'.
 screen-active = 0.
 ELSE.
 screen-active = 1.
 ENDIF.
 MODIFY SCREEN.
 ENDIF.
ENDLOOP.
IF rb_user = 'X'.
* When display for material group is off
* then refresh the select option for material
* group
 REFRESH s_matkl.
ENDIF.
ENDFORM. " f13000_check_radio
hope this helps.

ERROR ITMS-9000: "Unable to parse apple display options file: com.apple.ibooks.display-options.xml" at Book (MZItmspBookPackage)

Hi, I'm En32, now trying to publish my first iBooks (epub).
The package I created is always rejected to deliver with following error.
Does anyone who can provide me a solution ?
=== error ===
Package Summary:
1 package(s) were not uploaded because they had problems:
 /Users/En32/Music/iTunes Producer/Playlists/10000448204.itmsp - Error Messages:
 Apple's web service operation was not successful
 Unable to authenticate the package: 10000448204.itmsp
 ERROR ITMS-9000: "Unable to parse apple display options file: com.apple.ibooks.display-options.xml" at Book (MZItmspBookPackage)
===
$ cat META-INF/com.apple.ibooks.display-options.xml
<?xml version=”1.0″ encoding=”UTF-8″?>
<display_options>
<platform name=”*”>
<option name=”fixed-layout”>true</option>
</platform>
</display_options>
===
Actually, I'd like to use fixed layout so I use com.apple.ibooks.display-options.xml.
This ePub file looks good because I can open it with my iPad - iBooks, however iTunes publisher always rejects this.
Any solutions ?

I was getting that error when I used OSX's default compress feature. I found a little utility called ePub Zip and used it to compress (zip) my ePubs and that did the trick. They then passed the validation. I got it here:
http://www.mobileread.com/forums/showthread.php?t=55681

Display Options in Acrobat X

Hi,
I'm looking to find the Display Option tab in Acrobat PDF Maker X but can't find it, specifically I want to be able to set Document Open Options. In Acrobat 5, there was a Display Option tab which allowed you to set Bookmarks and Page using a radio button and the Open Magnification from a drop down.
Are these options in Acrobat PDF Maker X?
Any information is appreciated.
Thanks

Hi,
Thanks for the reply. I was hoping that you could specify these options before you generate the PDF, you could do this in Acrobat PDF Maker 5.0
Date: Wed, 20 Apr 2011 13:34:37 -0600
From: [email protected]
To: [email protected]
Subject: Display Options in Acrobat X
You can set this options in Acrobat X. Look at the properties of the document.
>

Display options in 10.5.8 missing

Similar Messages

Maybe you are looking for