Display output

I have a Qosmio x305-q705, part number PQX32U-02F017, it came installed with Win Vista. the OS became unstable and would not run certain programs so I did a complete backup, and re-installed OS from recovery disks, no problem so far. Then I upgraded OS to Win 7, but not from Toshiba, bad decision. System now will not output to external monitors, TVs etc. No HDMI nor VGA output. When press FN+F5 to get external monitor, computer doesn't even flash to acknowlegde. What drivers do I need to restore these functions?
Solved!
Go to Solution.

Qosmio X305-Q705
Downloads here.
After a clean install of Windows 7 (I would use 32-bit Windows), this Toshiba program will add the necessary drivers and utilities.
Toshiba Software Installer for Windows 7
You don't need to get the installation DVD from Toshiba. You can even download it for free.
-Jerry

Similar Messages

To Display Output in Grid ALV with change of some field display total with

Hi Masters,
I m working on ALV in which i have to display output with the following format.
Header
"Some String"                                                             date/time
User:XYZ01       page 1
Line
1st field    2nd    3rd     4th       5th   6th    7th   8th   9th 10th field
x               y       z        A        B     C       D     E      F       G
BLANK..............................................................................
                      "total 3rd+4TH"           P        Q     R      S        T
same thing for every change of 4th field .
So the problem is with inserting the line with string "Total of 3rd+4th" in the output .
Can Anyone help me out?
Thanks ,
Varlani Amit

Hi,
Use control-break statement ON-CHANGE for the 4th field, and do the changes.
regards,
sri

How to Download displayed output to Excel Using Bsp Application

Hi Experts,
please give me some idea because I am New In BSP.
How to Download displayed output to Excel Using Bsp Application.
If any sample code please do send me.
In my condition I am getting data in 2-3 table view formats on one page and i want download that in Excel.
please help me.
Regards & Thanks,
Yogesh

Hi,
This is more a question for the BSP forum.
Anyway, as such it's realy easy since you can use HTML in order to import to Excel. All you need to do is add
runtime->server->response->set_header_field( name = 'Contnet-Type'
value = 'application/vnd.ms-excel' ).
runtime->server->response->delete_header_field( name = 'Cache-Control' ).
runtime->server->response->delete_header_field( name = 'Expires' ).
runtime->server->response->delete_header_field( name = 'Pragma' ).
Also check threads like
Download BSP data into Excel
export bsp-table to excel
Export BSP Table to Excel
Eddy
PS. Reward useful answers and earn points yourself

Plz help me, no display output during boot up of 715 workstation

now i have a HP 715 model workstation,today, conneted hp monitor..but can't display output during system boot up so i tried solve this problem,1)changed battery2)removed HDD after reboot system and press ESC key => now can't use Keyboard..not working key board3)Press Tap key.. Just i think, this problem is system configulation problem. not monitor problem..so i found internet website..but now i can not change configulation who know this problem.plz help me

one question in html submit the reslut stored jdbc that value shows barchartAll your base are belong to us!
You know, while I understand that English isn't your first language (neither is it mine) and there's no need to be perfect: if you can't write an understandable post yourself, consider asking someone to do it for you.

Turn off external display output?

I've bought a nice big LCD TV mainly for consoles. Because I have it next to my iMac i've also connected that to the TV using a mini-dvi adapter and a dvi-hdmi cable.
It works great but I only want to use it for playing downloaded video and the like on the big tv.
When I'm not using it I want my iMac to free up the resources it must be using to achieve screen spanning but I cannot figure out a way to tell the iMac to disable external display output.
I've tried display mirroring figuring that it won't be eating up video RAM, but it causes page tearing on my mac when dragging windows around for example.
Even when the TV is unplugged from the mains the mac seems to be outputting to the dvi out, the only way to stop it is the yank the mini-dvi connecter from the back.
Are there any hacks or utilities that can manually turn dvi support on and off?

Hello Mark
I'm using a 27" flat screen TV, mini DVI and 12' S-Video cable.
Mostly I watch DVD movies on that Display while working at the iMac's 17" it's also great for iPhoto Slideshows and PowerPoint.
Not to worry the TV supports it's own display and all you are doing is sending a signal to it's video card. Just turn it off or change the channel.
I tend to stay away from mirroring for the same reasons, but also because the TV's across the room.
Again not to worry the TV supports it's own display and all you are doing is sending a signal to it's video card. Just leave it connected up to prevent damage to DVI port, Adapter and cable. "yank not"
Just be sure to gather up all your windows back to the iMac Display befor shutting off or changing the channel.
Dennis
17" iMac Intel Core Duo 1.5GB Ram Mac OS X (10.4.9) Maxtor 300GB FireWire Creative Inspire 2.1 2G Nano

Display Output similar to SPRO (IMG)

Hi Experts,
Can we develop a display output similar to the view which we have in SPRO (IMG).
Any Function Module or Sample Program.
Regards,
Abhijit G. Borkar

Thanx David,
Can u help tell me the difference between the Transaction Code: SHI3 & SE43 & SE43N.
Since they look similar to what you have suggested.
Regards,
Abhijit G. Borkar

Thunderbolt Display output only 800 x 600!!?!?!?!

Just got the Mac Book Pro Quad Core, 15", 8 gig ram.
I'm using the display output adapter in the Tunderbolt port. It outputs and syncs to my Image Pro switcher, but the options for the display output for the external only go up to 800 x 600.
Anyone know anything about this?
My old MacBook Pro could go up to the full resolution with the same video switcher and the same mini display output adapter.

It's possible that the switcher isn't compatible. Safe to presume that without the switcher you can achieve the desired resolution?

When I unplug Apple headphones from my MacBook Pro sond from internal speakers not work, and system soud preferences displayed: Output: optical digital out port only

When I unplug Apple headphones from my MacBook Pro sond from internal speakers not work, and system soud preferences displayed: Output: optical digital out port only

If you see a red light in the audio output port, then the internal switch is stuck. Insert the earphone plug a few times and see if you can trip the switch. If that fails, insert a cocktail stirrer and the like and jiggle it around inside. If that fails, take it to an Apple store and have the technicians at the genius bar do it for you.
Ciao.

[GTX770]No display output HDMI/Displayport when booting

I've recently upgraded to an Haswell setup with a MSI Z97 pc mate and MSI GTX770. The card seems to work fine when I use DVI output. However, when i try to use either hdmi or displayport I only get display output once i'm in windows. The bios and booting process give no output on either connection.
Is there something wrong with the GFX card, is there some bios setting i can try?

Quote
Thanks for the quick reply. Will this GOP UEFI bios make Displayport work on boot?
don't know, maybe
Quote
I've never heard of GOP UEFI bios, so I don't have a clue what advantages I get with that.
its related to Win8 features, ultra fast boot and so on if you decide to use such

Help! one to many relationship table and display output as exists

I have two tables:
Table1: LOCATION with field locn_id
Table2: TRACKING with field from_locn and to_locn
Example
locn_id from_locn to_locn
26001A 26001A 26002A
26002A 26001A 26001B
26001B 26001A 26001C
26001C
I am linking locn_id to from_locn.
I want to display output as:
If locn_id exists in from_locn (I dont care how many records), display Y. If locn_id does not exist then display N.
So in above case, output should be
26001A Y
26002A N
26001B N
26001C N

Here is my try:
create table LOCATION(locn_id   VARCHAR2(10));
create table TRACKING(locn_id   VARCHAR2(10), from_locn VARCHAR2(10), to_locn VARCHAR2(10));
insert into LOCATION values('26001A');
insert into LOCATION values('26002A');
insert into LOCATION values('26001B');
insert into LOCATION values('26001C');
insert into TRACKING values('26001A', '26001A', '26002A');
insert into TRACKING values('26002A', '26001A', '26001B');
insert into TRACKING values('26001B', '26001A', '26001C');
insert into TRACKING values('26001C', '',       ''      );
select l.locn_id,
(select decode(count(*), 0, 'N', 'Y') from tracking t where l.locn_id = t.from_locn ) exists_flag
from   location l
LOCN_ID    E
26001A     Y
26002A     N
26001B     N
26001C     N
4 rows selected.Edited by: Thomas Morgan on May 31, 2013 3:43 PM

Rows to columns/Transpose the records Query and Display output

hi ,
can anyone help me query this and transpose it to this format?
i am still a beginner in sql.
thanks for help!
Rows to columns/Transpose the records Query and Display output
id     startdate     endate
1111     1/2/2001     11/3/2001
1111     2/5/2002     4/3/2002
1111     2/6/2000     2/5/2001
3333     5/2/2003     11/3/2003
3333     6/2/2003     12/3/2003
3333     2/6/2005     2/5/2005
desired output
id     startdate1     endate1     startdate2     endate2     startdate3     endate3
1111     1/2/2001     11/3/2001     2/5/2002     4/3/2002     2/6/2000     2/5/2001
3333     5/2/2003     11/3/2003     6/2/2003     12/3/2003     2/6/2005     2/5/2005

Have you only 3 dates for each id ?
So, try :
SQL> l
1 with tbl as
2 (select 1111 as id, to_date('01/02/2001','DD/MM/YYYY') startdate, to_date('11/03/2001','DD/MM/YYYY') enddate from dual union all
3 select 1111 as id, to_date('02/05/2002','DD/MM/YYYY') startdate, to_date('04/03/2002','DD/MM/YYYY') enddate from dual union all
4 select 1111 as id, to_date('02/06/2000','DD/MM/YYYY') startdate, to_date('02/05/2001','DD/MM/YYYY') enddate from dual union all
5 select 3333 as id, to_date('05/02/2003','DD/MM/YYYY') startdate, to_date('11/03/2003','DD/MM/YYYY') enddate from dual union all
6 select 3333 as id, to_date('06/02/2003','DD/MM/YYYY') startdate, to_date('12/03/2003','DD/MM/YYYY') enddate from dual union all
7 select 3333 as id, to_date('02/06/2005','DD/MM/YYYY') startdate, to_date('02/05/2005','DD/MM/YYYY') enddate from dual )
8 select id, max(decode(dr,1,startdate)) start1,
9             max(decode(dr,1,enddate)) end1,
10             max(decode(dr,2,startdate)) start2,
11             max(decode(dr,2,enddate)) end2,
12             max(decode(dr,3,startdate)) start3,
13             max(decode(dr,3,enddate)) end3
14 from (select id, startdate,enddate, dense_rank() over (partition by id order by startdate) dr from tbl)
15* group by id
SQL> /
                                                ID START1   END1     START2   END2     START3   END3
                                              1111 02/06/00 02/05/01 01/02/01 11/03/01 02/05/02 04/03/02
                                              3333 05/02/03 11/03/03 06/02/03 12/03/03 02/06/05 02/05/05
SQL> HTH,
Nicolas.

Display output page by page in ALV

HI all,
can anyone pls tell me how to display output page by page in ALV
this is urgent..
Thanks

Hi,
if your case is like there sales orders,items.
you want to prints all sales order+its items in one page
then
you need to build sort table.
    L_SPOS                 = L_SPOS + 1.
    IT_SORT_DATA-SPOS      = L_SPOS.
    IT_SORT_DATA-FIELDNAME = 'VBELN'.
    IT_SORT_DATA-TABNAME   = 'IT_DISPLAY'.
    IT_SORT_DATA-DOWN      = 'X'.
    IT_SORT_DATA-GROUP = '*'. "this is for page break
    APPEND IT_SORT_DATA.
    CLEAR IT_SORT_DATA.
pass this sort info to alv fm.
regards
vijay

WD Compoenent - Non -Interactive form- Not displaying output

Hi,
I am practicing this adobe form session [https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/media/uuid/a3e2f018-0b01-0010-c7a8-89deb6e63e97] from SDN.Unfortunately this session was not complete so I am trying to complete it.
In brief : this WD component accepts CARRID and displays output in PDF format.
I was able to capture selection and get respective entries for that selection in my internal table but my display is blank.Here is what I coded in Search Button..
method ONACTIONSEARCH .
    data: isflight type table of sflight.
    DATA lo_nd_adobe_data TYPE REF TO if_wd_context_node.
    DATA lo_el_adobe_data TYPE REF TO if_wd_context_element.
    DATA lo_nd_data_selections TYPE REF TO if_wd_context_node.
    DATA lo_el_data_selections TYPE REF TO if_wd_context_element.
    DATA ls_data_selections TYPE wd_this->element_data_selections.
* navigate from <CONTEXT> to <DATA_SELECTIONS> via lead selection
    lo_nd_data_selections = wd_context->get_child_node( name = wd_this->wdctx_data_selections ).
* get element via lead selection
    lo_el_data_selections = lo_nd_data_selections->get_element( ).
* get all declared attributes
    lo_el_data_selections->get_static_attributes(
      IMPORTING
        static_attributes = ls_data_selections ).
* Retrieve that data from the database. Normally it is suggested to
* encapsulate the data retrieval in a separate class.
* For simplicity, the SELECT statement has been implemented here.
    clear isflight. refresh isflight.
    select * into corresponding fields of table isflight from sflight
    where carrid = ls_data_selections.
* navigate from <CONTEXT> to <ADOBE_DATA> via lead selection
    lo_nd_adobe_data = wd_context->get_child_node( name = `ADOBE_DATA` ).
    lo_nd_adobe_data->bind_elements( isflight ).
endmethod.
endclass.
Anything wrong with my code..I am getting my data in isflight internal table.
FYI..I am throwing output as text field in adobe form.
rgds
vara
Edited by: Vara K on Jan 19, 2009 9:51 PM
Edited by: Vara K on Jan 19, 2009 10:02 PM

Hi Vara,
Try this:
method ONACTIONSEARCH .
    data: isflight type table of sflight.
    DATA lo_nd_adobe_data TYPE REF TO if_wd_context_node.
    DATA lo_el_adobe_data TYPE REF TO if_wd_context_element.
    DATA lo_nd_data_selections TYPE REF TO if_wd_context_node.
    DATA lo_el_data_selections TYPE REF TO if_wd_context_element.
    DATA ls_data_selections TYPE wd_this->element_data_selections.
* navigate from <CONTEXT> to <DATA_SELECTIONS> via lead selection
    lo_nd_data_selections = wd_context->get_child_node( name = wd_this->wdctx_data_selections ).
* get element via lead selection
    lo_el_data_selections = lo_nd_data_selections->get_element( ).
* get all declared attributes
    lo_el_data_selections->get_static_attributes(
      IMPORTING
        static_attributes = ls_data_selections ).
* Retrieve that data from the database. Normally it is suggested to
* encapsulate the data retrieval in a separate class.
* For simplicity, the SELECT statement has been implemented here.
*    clear isflight. refresh isflight.
    select * into corresponding fields of table isflight from sflight
    where carrid = ls_data_selections-carrid.
* navigate from <CONTEXT> to <ADOBE_DATA> via lead selection
    lo_nd_adobe_data = wd_context->get_child_node( name = `ADOBE_DATA` ).
    lo_nd_adobe_data->bind_elements( isflight ).
endmethod.
I hope it helps.
Regards
Arjun

WAD Report delaying to display output

Hello,
WAD report taking 6 min time to display the output but the same report displaying output
in 1 min 50 sec when I executed in BEx Analyzer
The Same BEx report I incorporated in WAD but it's delaying to display the output.
What might be the cause in delaying the output display.
Srujay

Hi,
Please to use the new cache mode as note:
1026944 - New cache mode for BI 7.0 without directory
As per the note:
To activate the new cache mode, run the report SAP_RSADMIN_MAINTAIN with
the following parameters and the option "INSERT":
OBJECT: RSR_CACHE_ACTIVATE_NEW
VALUE: X
After this procedure you can benefit from the new cache mode by
activating it for your query or queries. Go to RSRT -> enter query -> properties ->
cache mode: 5 Cluster Enhanced should be selected.
Or via mass maintenance to all queries (transaction RSRT -> menu "Environment" -> "Mass Maintenance").
It should resolved your issue.
Thanks,
Venkat

How to display output only sort format in alv

Hi Experts,
I have one problem in alv output display. I'm developing alv report for orders raised during the period.I want to display each order wise value(netwr) and order quatity (kwmeng) . i set 8 radio buttons one radio btn click then i want output ex.in grid display click on sort then each order wise calculate the value and quantity . that particular data to display when click on radio button.
ex:click on sort in grid display.
(branch) (order no)     (quantity)   (value)                        (BSTNK)
AMUM     0000003354     2             10                                    3,271
AMUM     0000003354     1              10                                    6,542
                                                   (above qty sum 2+1=3)
(SUM) =   AMUM       0000003354            3                       20            9,813
HIP2         0000003362     2           5     17,810
HIP2             0000003362     1          5     23,075
(sum) = HIP2          0000003362                 10           40,885
i display output in alv griddisplay.client asking one rb put in selection screen i want output like above only sum col.
when i click one radio button output is come like (sum) above.
Please help me.
Thanks & Regards,
Balakrishna Gajula

hi you need to use sortinfo for your requirement.
ie see the below code.
"declare sortinfo at data declaration
data:   wa_sort     type slis_sortinfo_alv,      "''' add this
            layout      type slis_layout_alv.          "add this
""make the below changes in your fieldcat
wa_fieldcat-tabname   = 'FINAL'.
wa_fieldcat-seltext_m = 'Td - Rvdt'.
wa_fieldcat-fieldname = 'QUANTITY'.
wa_fieldcat-do_sum    = 'X'.          """"""add this to your *QUANTITY field*
append wa_fieldcat to it_fieldcat.
clear wa_fieldcat.
wa_fieldcat-tabname   = 'FINAL'.
wa_fieldcat-seltext_m = 'temp''.
wa_fieldcat-fieldname = 'VALUE'.
wa_fieldcat-do_sum    = 'X'.             """"""add this to your *VALUE field*
append wa_fieldcat to it_fieldcat.
clear wa_fieldcat.
""""" you need to add this after workarea of fieldcat
wa_sort-fieldname = 'BRANCH'. " Here Branch indicates the fieldname
wa_sort-subtot    = 'X'.
append wa_sort to it_sort.
clear wa_sort.
wa_sort-fieldname = 'ORDERNO'.
append wa_sort to it_sort.
clear wa_sort.
" in your alv fm add sortinfo
call function 'REUSE_ALV_GRID_DISPLAY'
    exporting
      i_callback_program = sy-cprog
      is_layout          = layout
      it_fieldcat        = it_fieldcat
      it_sort            = it_sort                   """""""""add this
    tables
      t_outtab           = final                   " your internal table name
    exceptions
      program_error      = 1
      others             = 2.
if sy-subrc <> 0.
* MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
*         WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
endif.
This solves your purpose.
Regards,
koolspy.

Enhancing display output of QI06

I have been asked to see if it is possible to add and fill the field mara-labor to the display output of transaction QI06 (program RQBAAM10). I have not been able to locate a user exit or enhancement for this. If someone knows how this might be possible, I would appreciate your input.
Best regards,
Russ

>
Hi,
I use dbms_output statement in proceudre and run it in Toad, but there
should execute " set serveroutput on " to display output of dbms_output statement .
but how can I get this feature in Toad.At the bottom of your window, there are number of tabs. One of them is
DBMS_Output. There is a little red button on the left hand side. Click this.
It will turn green. Then your output is visible - you can click in it and scroll
up through your results.
In future, ask your Toad questions in a Toad forum.
HTH,
Paul...

Display output

Similar Messages

Maybe you are looking for