Display outside hard to use

When it is light out it is hard to use. Its hardly useable. Are there any options in improving the display? I have the Macbook Black unit.

I too have trouble with this. Anyone have a solution? Like a screen cover or something?

Similar Messages

  • Currently i am outside country and using my family person sim but my iphone display shows unknown call it become difficult when i missed call please help me out

    currently i am outside country and using my family person sim but my iphone incoming call display shows unknown call it become difficult when i missed call please help me out

    We are all users here
    what exactly do want any one to do ?

  • Why is iCal so much harder to use????

    Is it just me...but why does it seem like iCal is way harder to use in Leopard?!?!?! Just look at the number of steps/clicks it takes just to enter an entry.
    In month view, you double click on the day, but you can only enter in a title. you have to double click on the new event before you can enter in any details or even a time. And the box that pop-up is a tiny little box. In the old version of ical you could enter in everything in the right hand panel right away.
    Then there is viewing events you have to double the event to get a little pop-up in order to see the details of the event. All you had to do before was click on an event and it would display in the side panel. Much much easier and less work.
    Does the new ical bother anyone else? or is it just me? it just seems like they rushed it. there's lots of other little annoyances and inconsistencies in it too.

    Why is it that I seem to be unable to reply to this post? Well, here goes another try:
    I agree: iCal is harder to use. In addition, there seems to have been little or no super-improvement in iCal (etc.) as we move to Leopard. It looks to me as if Apple must have hired tired, clueless (typical) Microsoft programmers to "help" them in this latest development.
    I sincerely hope that Steve Jobs gets his broom out and cleans house. The "improvements" in Leopard seem to be salted with Windows-like stupidity and productivity reductions. Is Bill Gates now working in the Apple Human Resources Department?

  • Every time I try to back up my Macbook Pro with an external hard drive using Time Machine, I receive the error of "the disk does not have enough space". I have a 500GB hard drive and only 120GB Macbook. It worked fine before the latest Maverick's

    Every time I try to back up my Macbook Pro with an external hard drive using Time Machine, I receive the error of "the disk does not have enough space". I have a 500GB external hard drive and only 120GB Macbook. It worked fine before the latest Maverick's update. Any help would be greatly appreciated.

    My guess would be it has created an entirely new backup of your drive when you upgraded to Mavericks.
    See Here: http://pondini.org/TM/1.html
    And here: http://pondini.org/TM/9.html
    Peruse the whole site. There is a lot of information there.

  • I just backed up my mac to an external hard drive using Time Machine. What would happen if I turn Time Machine off and then plug the external hard drive back into my computer?

    I just backed up my mac to an external hard drive using Time Machine. What would happen if I turn Time Machine off and then plug the external hard drive back into my computer?
    What I am ultimately wanting to do is make more room on my computer by backing up all of my files onto the external hard drive and then deleting them off of my computer. However, neededing to be able to retrieve them from the external hard drive later down the road.
    From what I have read and am trying to understand, is that I probably shouldn't have used time machine. I need to use the external hard drive like a basic flash drive where I can put things on and get things off without having it automatically update through time machine everytime I connect it to my computer.
    Not tech savvy at all and barely understand basics. I need very simple and easy to understand explanations.

    sydababy wrote:
    and then deleting them off of my computer.
    BIG BIG MISTAKE ..... youre making a linchpin deathtrap for your data trying to shove everything on a single fragile HD.
    Dont suffer the tragedy other people make, buy another or 2 more HD, theyre cheap as dust.
    The number of people who have experienced terror by having a single external HD backup is enormous.  One failure that WILL HAPPEN, and kaput,......all gone!
    Dont do it, its all about redundancy, redundancy, redundancy.
    follow here:
    Methodology to protect your data. Backups vs. Archives. Long-term data protection
    Deleting them off your computer is fine....having only ONE copy is extremely BAD.
    The Tragedy that will be, the tragedy that never should be
    Always presume correctly that your data is priceless and takes a very long time to create and often is irreplaceable. Always presume accurately that hard drives are extremely cheap, and you have no excuse not to have multiple redundant copies of your data copied on hard drives and squirreled away several places, lockboxes, safes, fireboxes, offsite and otherwise.
    Hard drives aren't prone to failure…hard drives are guaranteed to fail (the very same is true of SSD). Hard drives dont die when aged, hard drives die at any age, and peak in death when young and slowly increase in risk as they age.
    Never practice at any time for any reason the false premise and unreal sense of security in thinking your data is safe on any single external hard drive. This is never the case and has proven to be the single most common horrible tragedy of data loss that exists.
    Many 100s of millions of hours of lost work and data are lost each year due to this single common false security. This is an unnatural disaster that can avoid by making all data redundant and then redundant again. If you let a $60 additional redundant hard drive and 3 hours of copying stand between you and years of work, then you've made a fundamental mistake countless 1000s of people each year have come to regret.

  • Greeting,  I want to reformat my external hard drive using Mac OS Extended (Journaled, Encrypted ) but before formatting it, I want to make sure that if I loose the hard drive or the hard drive get stolen, no one will be able to retrieve or recover the in

    Greeting,
    I want to reformat my external hard drive using Mac OS Extended (Journaled, Encrypted ) but before formatting it, I want to make sure that if I loose the hard drive or the hard drive get stolen, no one will be able to retrieve or recover the information on it so could you tell me what kind of encryption will be used or is there any way to recover the information?
    Thanks!

    I think FileVault is used to encryp internal hard drive but I wanna encrypt an external hard drive with Mac OS Extended Journaled Encrypted which is completely different!

  • I am trying to re load Lightroom 5.7 frommy outside hard drive to my new hard drive . I am able to reach a certain point in the download and I am then asked for the access code which I do not have. I had upgraded on line from Lightroom3.

    Hello,
    I just had the hard drive on my computer replaced, and the Lightroom5.7 and Photoshop cannot be sent over from the outside hard drive without an access code!! Now what do I do? Will Adobe have a record of my Lightroom3 download and my 5.7 upgrade?

    If you took the time to register your software on the Adobe web site, then you can log on and retrieve your serial numbers.
    Find your serial number quickly
    You ought to be able to retrieve the serial numbers from your first hard drive ... that requires knowing what your operating system is and if the first hard drive actually is readable.
    And if none of that works ... well then I think you're way out of luck.
    Might I suggest you adopt a new method of keeping track of your serial numbers, not just for Lightroom but all of your software? I suggest you create a computer text file named serialnumbers.txt, containing all of your serial numbers, stored on your computer and in a cloud backup service (like DropBox which is free) so that you will never lose it.

  • Display reports from BW using WAD on blackberry

    Hi All,
    I have to display reports from BW using WAD on blackberry
    can any one please guide me how to do it?
    awaiting Reply
    Thanks & Regards
    Prasad

    you have to integrate SAP Mobile infrastrcture with BW system to achive this.

  • Column Heading are not displayed in ALV Report using CL_SALV_DISPLAY?

    Hi,
       I am using CL_SALV_DISPLAY class to display data. I Created an Internal Table Dynamically based fieldcatalog which was prepared based data at run time. When i displayed data using CL_SALC_DISPALY data is display in output but column headings are not displayed.
    can anyone suggest me how to display heading in ALV using CL_SALV_DISPLAY class, My code is
          CLASS lcl_report DEFINITION
    CLASS lcl_report DEFINITION.
      PUBLIC SECTION.
        METHODS:
          display  IMPORTING l_table  TYPE string
                             l_fcat   TYPE string.
    ENDCLASS.                    "lcl_report DEFINITION
          CLASS lcl_report IMPLEMENTATION
    CLASS lcl_report IMPLEMENTATION.
      METHOD display.
        DATA: gr_table   TYPE REF TO cl_salv_table.
        DATA: gr_columns TYPE REF TO cl_salv_columns_table,
              gr_column  TYPE REF TO cl_salv_column_table,
              ls_fcat    TYPE slis_fieldcat_alv.
        DATA: gr_display TYPE REF TO cl_salv_display_settings.
        DATA: l_o_functions TYPE REF TO cl_salv_functions_list,
              l_field    TYPE string.
        FIELD-SYMBOLS : <fs_table>    TYPE STANDARD TABLE,
                        <ft_fcat>     TYPE STANDARD TABLE.
    Get the ALV object refering to the output table
        ASSIGN (l_table) TO <fs_table>.
        ASSIGN (l_fcat)  TO <ft_fcat>.
        TRY.
            cl_salv_table=>factory(
              IMPORTING
                r_salv_table = gr_table
              CHANGING
                t_table      = <fs_table> ).
          CATCH cx_salv_msg.                                "#EC NO_HANDLER
        ENDTRY.
    Add basic default functionality in the ALV report
    Functions
        l_o_functions = gr_table->get_functions( ).
        l_o_functions->set_all( abap_true ).
        gr_columns = gr_table->get_columns( ).
        gr_columns->set_headers_visible( abap_true ).
    Display the list
        gr_table->display( ).
      ENDMETHOD.                    "extract
    ENDCLASS.                    "lcl_report IMPLEMENTATION
    *& start-of-selection declaration
    START-OF-SELECTION.
      PERFORM :
      get store codes
        get_storecodes    USING      p_stfile
                          CHANGING   it_t001w,
      fetching mard data
        read_mard_data,
      preparing fieldcatalog for Final Data
        create_filedcat   USING      it_t001w
                                     it_site
                          CHANGING   it_fieldcat,
      preparing structure & internal table for Final Data
        create_final_table_structure  USING  it_fieldcat,
      prepare output data
        prepare_final_data.
    *& end-of-selection declaration
    END-OF-SELECTION.
      PERFORM :
      display data
        display_data    USING l_table
                              l_fcat.
    *&      Form  get_storecodes
    FORM get_storecodes  USING    p_p_stfile
                         CHANGING p_it_t001w  LIKE it_t001w[].
      DATA  :
    internal table for RAW
      lt_raw    TYPE truxs_t_text_data,
      rs_site   LIKE LINE OF rt_site,
      l_index   LIKE sy-tabix.
      FIELD-SYMBOLS :
    field symbol for it_t001w
      <fs_t001w>   LIKE LINE OF p_it_t001w.
    calling function module to get Stores Data from File
      CALL FUNCTION 'TEXT_CONVERT_XLS_TO_SAP'
        EXPORTING
          i_line_header        = 'X'
          i_tab_raw_data       = lt_raw
          i_filename           = p_p_stfile
        TABLES
          i_tab_converted_data = p_it_t001w[]
        EXCEPTIONS
          conversion_failed    = 1
          OTHERS               = 2.
      IF sy-subrc <> 0.
        EXIT.
      ENDIF.
      SORT p_it_t001w BY werks.
      CLEAR rs_site.
      rs_site-sign   = 'I'.
      rs_site-option = 'EQ'.
      rs_site-low    = p_dccode.
      APPEND rs_site TO rt_site.
      IF it_t001w[] IS NOT INITIAL.
        LOOP AT p_it_t001w ASSIGNING <fs_t001w>.
          l_index   = sy-tabix.
          CALL FUNCTION 'CONVERSION_EXIT_ALPHA_INPUT'
            EXPORTING
              input  = <fs_t001w>-werks
            IMPORTING
              output = <fs_t001w>-werks.
          MODIFY p_it_t001w FROM <fs_t001w> INDEX l_index.
          IF <fs_t001w>-werks GE s_site-low AND <fs_t001w>-werks LE s_site-high.
          append site to ranges
            CLEAR rs_site.
            rs_site-sign   = 'I'.
            rs_site-option = 'EQ'.
            rs_site-low    = <fs_t001w>-werks.
            APPEND rs_site TO rt_site.
            CONTINUE.
          ENDIF.
        ENDLOOP.
        SORT p_it_t001w BY werks.
        SORT rt_site.
      ENDIF.
    ENDFORM.                    " get_storecodes
    *&      Form  create_final_table_structure
    FORM create_filedcat   USING    p_it_t001w      LIKE it_t001w[]
                                    p_it_site       LIKE it_site[]
                           CHANGING p_it_fieldcat   LIKE it_fieldcat[].
      FIELD-SYMBOLS :
    field symbol for p_it_t001w
      <fs_t001w>     LIKE LINE OF p_it_t001w,
    field symbol for p_it_site
      <fs_site>      LIKE LINE OF p_it_site.
      DATA :
    fieldname
      l_fieldname    TYPE slis_fieldname,
    workarea for site ranges
      rs_site        LIKE LINE OF rt_site.
      CLEAR : l_fieldname, rs_site.
      l_fieldname    = p_dccode.
      PERFORM
    prepare fieldcatalog
      build_fieldcatalog USING :   'MTART'      'CHAR'        '5'  ,
                                   'MTBEZ'      'CHAR'        '25' ,
                                   'MATKL'      'CHAR'        '6'  ,
                                   'WGBEZ'      'CHAR'        '20' ,
                                   'MATNR'      'CHAR'        '18' ,
                                   'MAKTX'      'CHAR'        '30' ,
                                    l_fieldname 'CHAR'        '17' .
    create header for excel
      PERFORM create_excel_header USING  : 'Division',
                                           'Divsion Description',
                                           'MC Code',
                                           'MC Description',
                                           'Article',
                                           'Article Description',
                                            l_fieldname.
    loop for creating fieldcatalog
      LOOP AT it_site ASSIGNING <fs_site>.
        READ TABLE it_t001w ASSIGNING <fs_t001w> WITH KEY werks = <fs_site>-werks
                                                                  BINARY SEARCH.
        IF sy-subrc = 0           AND <fs_t001w> IS ASSIGNED AND
           <fs_site> IS ASSIGNED  AND <fs_site>-stock GT 0.
          CLEAR : l_fieldname, rs_site.
          l_fieldname    = <fs_site>-werks.
        prepare fieldcatalog
          PERFORM build_fieldcatalog USING : l_fieldname    'CHAR'   '17'.
        create header for excel
          PERFORM create_excel_header USING  l_fieldname  .
          CONTINUE.
        ENDIF.
      ENDLOOP.
      l_fcat  = 'it_fieldcat[]'.
    ENDFORM.                    " create_final_table_structure
    *&      Form  build_fieldcatalog
    FORM build_fieldcatalog  USING    p_fieldname      TYPE slis_fieldname
                                      p_datatype       TYPE datatype_d
                                      p_length         TYPE intlen.
      DATA : ls_fieldcat    LIKE LINE OF it_fieldcat.
      CLEAR  : ls_fieldcat.
      ls_fieldcat-fieldname   = p_fieldname.
      ls_fieldcat-datatype    = p_datatype.
      ls_fieldcat-intlen      = p_length.
      APPEND ls_fieldcat TO it_fieldcat.
    ENDFORM.                    " build_fieldcatalog
    *&      Form  create_final_table_structure
    FORM create_final_table_structure  USING    p_it_fieldcat.
    Create dynamic internal table and assign to FS
      CALL METHOD cl_alv_table_create=>create_dynamic_table
        EXPORTING
          it_fieldcatalog = it_fieldcat
        IMPORTING
          ep_table        = t_table.
      ASSIGN t_table->*  TO <ft_final>.
    ENDFORM.                    " create_final_table_structure
    *&      Form  create_excel_header
    FORM create_excel_header  USING    p_p_fieldname.
      DATA : ls_header  LIKE LINE OF it_header.
      CLEAR ls_header.
      ls_header-col_name  = p_p_fieldname.
      APPEND ls_header TO it_header.
    ENDFORM.                    " create_excel_header
    *&      Form  prepare_final_data
    FORM prepare_final_data .
      DATA          : l_matnr       LIKE g_matnr,
                      l_werks       LIKE g_werks,
                      l_index       LIKE sy-tabix.
      FIELD-SYMBOLS : <fs_mard>     LIKE LINE OF it_mard.
    Getting No. of Lines in IT_MARD internal table
      DESCRIBE TABLE it_mard LINES g_lines.
      LOOP AT it_mard ASSIGNING <fs_mard>.
        l_index    = sy-tabix.
        IF l_matnr IS INITIAL.
          l_matnr  = <fs_mard>-matnr.
          CLEAR : l_werks.
          l_werks    = <fs_mard>-werks.
          UNASSIGN : <fs_value>, <fs_final>.
        Create dynamic work area and assign to FS
          CREATE DATA t_line LIKE LINE OF <ft_final>.
          ASSIGN t_line->*   TO <fs_final>.
          ASSIGN COMPONENT 'MATNR'  OF STRUCTURE <fs_final> TO <fs_value>.
          <fs_value>        = <fs_mard>-matnr.
          ASSIGN COMPONENT l_werks  OF STRUCTURE <fs_final> TO <fs_value>.
          <fs_value>        = <fs_value> + <fs_mard>-labst.
        getting Article Type,MC & its Descriptions
          PERFORM get_other_data    USING     l_matnr
                                              l_werks.
        ELSEIF l_matnr <> <fs_mard>-matnr.
          APPEND <fs_final> TO <ft_final>.
          CLEAR l_matnr.
          l_matnr  = <fs_mard>-matnr.
          CLEAR : l_werks.
          l_werks    = <fs_mard>-werks.
          UNASSIGN : <fs_value>, <fs_final>.
        Create dynamic work area and assign to FS
          CREATE DATA t_line LIKE LINE OF <ft_final>.
          ASSIGN t_line->*   TO <fs_final>.
          ASSIGN COMPONENT 'MATNR'  OF STRUCTURE <fs_final> TO <fs_value>.
          <fs_value>        = <fs_mard>-matnr.
          ASSIGN COMPONENT l_werks  OF STRUCTURE <fs_final> TO <fs_value>.
          <fs_value>        = <fs_value> + <fs_mard>-labst.
        getting Article Type,MC & its Descriptions
          PERFORM get_other_data    USING     l_matnr
                                             l_werks.
        ELSE.
          CLEAR : l_werks.
          l_werks    = <fs_mard>-werks.
          ASSIGN COMPONENT l_werks  OF STRUCTURE <fs_final> TO <fs_value>.
          <fs_value>        = <fs_value> + <fs_mard>-labst.
        ENDIF.
        IF l_index = g_lines.
          APPEND <fs_final> TO <ft_final>.
        ENDIF.
      ENDLOOP.
      l_table  = '<ft_final>[]'.
    ENDFORM.                    " prepare_final_data
    *&      Form  get_other_data
    FORM get_other_data  USING    p_l_matnr
                                  p_l_werks.
      FIELD-SYMBOLS : <fs_mara>     LIKE LINE OF it_mara,
                      <fs_t023t>    LIKE LINE OF it_t023t,
                      <fs_t134t>    LIKE LINE OF it_t134t,
                      <fs_makt>     LIKE LINE OF it_makt.
      READ TABLE it_mara ASSIGNING <fs_mara> WITH KEY matnr = p_l_matnr.   " BINARY SEARCH.
      IF sy-subrc = 0 AND <fs_mara> IS ASSIGNED.
        ASSIGN COMPONENT 'MTART'  OF STRUCTURE <fs_final> TO <fs_value>.
        <fs_value>        = <fs_mara>-mtart.
        ASSIGN COMPONENT 'MATKL'  OF STRUCTURE <fs_final> TO <fs_value>.
        <fs_value>        = <fs_mara>-matkl.
        READ TABLE it_makt  ASSIGNING <fs_makt>  WITH KEY matnr =  <fs_mara>-matnr   BINARY SEARCH.
        IF sy-subrc = 0 AND <fs_makt> IS ASSIGNED.
          ASSIGN COMPONENT 'MAKTX'  OF STRUCTURE <fs_final> TO <fs_value>.
          <fs_value>        = <fs_makt>-maktx.
        ENDIF.
        READ TABLE it_t023t ASSIGNING <fs_t023t> WITH KEY matkl = <fs_mara>-matkl  BINARY SEARCH.
        IF sy-subrc = 0 AND <fs_t023t> IS ASSIGNED.
          ASSIGN COMPONENT 'WGBEZ'  OF STRUCTURE <fs_final> TO <fs_value>.
          <fs_value>      = <fs_t023t>-wgbez.
        ENDIF.
        READ TABLE it_t134t ASSIGNING <fs_t134t> WITH KEY mtart = <fs_mara>-mtart  BINARY SEARCH.
        IF sy-subrc = 0 AND <fs_t134t> IS ASSIGNED.
          ASSIGN COMPONENT 'MTBEZ'  OF STRUCTURE <fs_final> TO <fs_value>.
          <fs_value>      = <fs_t134t>-mtbez.
        ENDIF.
      ENDIF.
    ENDFORM.                    " get_other_data
    *&      Form  display_data
          text
    FORM display_data  USING    p_l_table
                                p_l_fcat.
      DATA:
    Variable for Object Creation
      o_report TYPE REF TO lcl_report.
      CREATE OBJECT o_report.
      o_report->display( EXPORTING l_table = p_l_table
                                   l_fcat  = p_l_fcat ).
    ENDFORM.                    " display_data

    I don't know how to read the code you pasted or I would have checked this myself.
    Do your fields in the internal table reference dictionary objects or elementary types? If not using dictionary types, the column names will be blank by default. If you can't change your fields to be dictionary types, you can try this to change the column names:
    I made a method inside my local class to add the names:
            call method set_colname
              EXPORTING iv_tab = alv_tab
                        iv_colid = 'xxxx'  "fieldname from the table
                        iv_stxt = text-t54
                        iv_mtxt = text-t55
                        iv_ltxt = text-t55.
    METHOD set_colname .
      data:
              alv_cols type REF TO cl_salv_columns_table,
              alv_col type REF TO cl_salv_column.
      TRY .
    *... Change fieldnames
            call METHOD iv_tab->get_columns RECEIVING value = alv_cols.
            call method alv_cols->get_column EXPORTING columnname = iv_colid RECEIVING value = alv_col.
            IF iv_stxt <> ''.
              CALL METHOD alv_col->set_short_text EXPORTING value = iv_stxt.
            ENDIF.
            IF iv_mtxt <> ''.
              CALL METHOD alv_col->set_medium_text EXPORTING value = iv_mtxt.
            ENDIF.
            IF iv_ltxt <> ''.
              CALL METHOD alv_col->set_long_text EXPORTING value = iv_ltxt.
            ENDIF.
       CATCH cx_salv_not_found.
      ENDTRY.
    ENDMETHOD. "set_colname

  • Display data in smartforms using report

    hi,
    i want to display data from smartform using report.
    i have a preview buttons in report when i select preview buttons displays in smarts
    regards
    amit

    design the smartform as per ur need and get  the function module generated by smartform and pass it to ur report programas below..
    case sy-ucomm.
    when 'smartform'.
    pass the f.m that is generated by system in smartforms
           CALL FUNCTION '/1BCDWB/SF00000265'
        EXPORTING
        ARCHIVE_INDEX              =
        ARCHIVE_INDEX_TAB          =
        ARCHIVE_PARAMETERS         =
        CONTROL_PARAMETERS         =
        MAIL_APPL_OBJ              =
        MAIL_RECIPIENT             =
        MAIL_SENDER                =
        OUTPUT_OPTIONS             =
        USER_SETTINGS              = 'X'
          DATE_L                     = s_fkdat-low
          DATE_H                     = s_fkdat-high
          PLANT_L                    = s_werks-low
          PLANT_H                    = s_werks-high
      IMPORTING
        DOCUMENT_OUTPUT_INFO       =
        JOB_OUTPUT_INFO            =
        JOB_OUTPUT_OPTIONS         =
        TABLES
          IFINAL                     = ifinal1[]
      EXCEPTIONS
        FORMATTING_ERROR           = 1
        INTERNAL_ERROR             = 2
        SEND_ERROR                 = 3
        USER_CANCELED              = 4
        OTHERS                     = 5
      IF SY-SUBRC <> 0.
    MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
            WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
      ENDIF.
    endcase.

  • Putting iMac display to sleep, when using TV as a screen.

    I have just connected my iMac to my 42" Panasonic 1080p TV, the connection was easy and is working fine. My questions relates to putting the iMac display to sleep when using the TV as a monitor, if I am watching You Tube, Sky Player or a DVD, I intend to use my TV as the monitor. Is it possible for the iMac to puts its display to sleep, whilst leaving the TV on. I played around with this today, however was unable to manage this.
    Regards Craig

    Hi Craig
    There is no way to independently sleep either the iMac's Display or an attached Display/TV. However if in the Display Arrangement Preferences you set the attached Display or TV to be the Main Display and turn Mirroring Off, then FrontRow and the Full Screen Mode app's like, DVD player, QuickTimePlayer, etc. will black out the unused iMac display.
    Dennis

  • Urgent: Issue while displaying the PDF Reports Using XDO Common region

    Hi all,
    In our product code we are trying to display the PDF Reports, using the xdo common region.
    Previously we were writing the pdf reports direclty onto the response direclty.
    This displays the report onto the browser but if navigate throw browser back button, it doesn't displays the report as the response stream is empty while navigating through back button.
    So to solve this issue, i tried to write the report using the OAHTMLWebBean and xdo common region. Here is the code:
    ByteArrayOutputStream xdoOutput = new ByteArrayOutputStream();
    XDOUtility.retrieveReport(xdoOutput,
    parameters,
    prop,
    appMod
    BlobDomain bxdoOutput = new BlobDomain();
    bxdoOutput.setBytes(xdoOutput.toByteArray());
    String redirectURL = DocumentHelper.getOutputURL(pageContext,
    bxdoOutput,
    "Report",
    "PDF");
    OAHTMLWebBean outRegion = (OAHTMLWebBean)createWebBean (pageContext, OAWebBeanConstants.HTML_WEB_BEAN, null, "IFRAME");
    outRegion.setHTMLAttributeValue("src", redirectURL);
    outRegion.setHTMLAttributeValue("width", "100%");
    outRegion.setHTMLAttributeValue("height", "100%");
    outRegion.setHTMLAttributeValue("title","Report");
    outRegion.setHTMLAttributeValue("name","Report");
    pageContext.getPageLayoutBean().addIndexedChild(outRegion);
    This successfully displays the report in the XDO Common region. But now the issue is that there are hyperlinks in the Report displayed where from where the user can navigate to other detail pages.
    When we click on these links, a new session starts in the xdo common region.
    Is it possible that when the user click the links in the report displayed, instead of starting a new session in the xdo region, the detail pages is displayed with in the older session.
    Regards
    Sandeep

    Hi all,
    In our product code we are trying to display the PDF Reports, using the xdo common region.
    Previously we were writing the pdf reports direclty onto the response direclty.
    This displays the report onto the browser but if navigate throw browser back button, it doesn't displays the report as the response stream is empty while navigating through back button.
    So to solve this issue, i tried to write the report using the OAHTMLWebBean and xdo common region. Here is the code:
    ByteArrayOutputStream xdoOutput = new ByteArrayOutputStream();
    XDOUtility.retrieveReport(xdoOutput,
    parameters,
    prop,
    appMod
    BlobDomain bxdoOutput = new BlobDomain();
    bxdoOutput.setBytes(xdoOutput.toByteArray());
    String redirectURL = DocumentHelper.getOutputURL(pageContext,
    bxdoOutput,
    "Report",
    "PDF");
    OAHTMLWebBean outRegion = (OAHTMLWebBean)createWebBean (pageContext, OAWebBeanConstants.HTML_WEB_BEAN, null, "IFRAME");
    outRegion.setHTMLAttributeValue("src", redirectURL);
    outRegion.setHTMLAttributeValue("width", "100%");
    outRegion.setHTMLAttributeValue("height", "100%");
    outRegion.setHTMLAttributeValue("title","Report");
    outRegion.setHTMLAttributeValue("name","Report");
    pageContext.getPageLayoutBean().addIndexedChild(outRegion);
    This successfully displays the report in the XDO Common region. But now the issue is that there are hyperlinks in the Report displayed where from where the user can navigate to other detail pages.
    When we click on these links, a new session starts in the xdo common region.
    Is it possible that when the user click the links in the report displayed, instead of starting a new session in the xdo region, the detail pages is displayed with in the older session.
    Regards
    Sandeep

  • How do I connect airport extreme to seagate hard drive using windows

    How do I connect airport extreme to seagate hard drive using windows?

    First the AirPort Extreme Base Station (AEBS) cannot share out an external HDD attached to its USB port unless it is formatted in either HFS+ or FAT16/32. It will not work if the HDD is formatted in either NTFS or ExFAT.
    If the HDD is formatted properly, when you access the AEBS with the AirPort Utility, does the HDD show up properly on the Disks tab of the utility?
    If it does, then you would access the HDD as any other network share, using the following format: //servername/sharename. In the case of the AirPort Disk (a HDD attached to the USB port of either an Extreme or Time Capsule), the "servername" would be the Extreme's Base Station Name, and the "sharename" would be the volumename of the HDD.

  • Why is itunes so hard to use - and why can't apple fix it?

    why is itunes so hard to use - and why can't apple fix it
    I dont know anybody who likes the way itunes works.'
    This last version is beyond awful. It took an already hard to use program - but one that I had at least figured out and made it even harder.

    Wendy,
    If you are experiencing a particular problem, please post specifics, and most likely someone here will be able to help.

  • After updating my iPad recently, I can no longer use it to present PPTs using a TV monitor that always previously worked. The display mentions something about using AirPlay which I am not using or trying to. Suggestions please?

    After updating my iPad recently, I can no longer use it to present PPTs using a TV monitor that always previously worked. The display mentions something about using AirPlay which I am not using or trying to. Suggestions please? I am currently using iOs 7.0 on this iPad and I never had a lick of trouble until aetr this update. Anything would help. Thanks.

    I'm adding screen shots taken from this afternoon showing connection that varied from non-existent to 1X.

Maybe you are looking for