DISPLAY PODs OK - locked for input - internet explorer not responding

Dear all,
After installation of SAP ME 6.0 we verified if we could acces the POD.
The POD was displayed all right, but seems to allow no input;
EXAMPLE:
POD-OPERATION
Display Screen: OK but
No possibility to enter operation and workcenter
The screen seems to get in a locked mode - internet explorer does not respond anymore....
Internet Explorer version 8.0.6001.18702
We get the same problem with all users defined in site 1000 (own site)
Has anyone experienced this problem??
Regards,
Rudi

Hi,
Possible culprit can be your Antivirus, McAfee has an script scan option which scans every Java script, this is known to slow down the SAP ME POD.
Also try accessing SAP ME using from the no add-ons IE (can be found in your system tools). Might help with the performance.
However we have found that the performance of the pod is better if we use an "IE Plugin" in firefox and access SAP ME.
You can try that.

Similar Messages

Won't go to selected websites, says "Internet Explores not responding"

At different times of the day, almost always early in the morning when I try to get to my home page or to my e-mail account it will say "(Internet Expolorer is not responding.)" My computer is pretty slow quite often. It's about 7 years old and I run Vista.

Minnwa,
Welcome to the HP Forum!
Preparation!
Before you make any changes to your computer, make sure you have all your backups current AND a means to recover the system should it be necessary.
HP and Compaq Desktop PCs -- Backing Up Your Files (Windows Vista)
Desktop Computers: Performing an HP System Recovery (Windows Vista)
Restore Points - "going back in time"
Even if you have current backups, you should have a Restore Point ready in case you need to take the computer back to a particluar date / time:
Desktop Computers – Using Microsoft Restore – Vista
When you create a Restore Point manually, be sure to first close all extra programs (email, Facebook, games, all browsers).
==========================================================================================
To Help with Slowness and IE not responding...
Assuming the hardware is still chunking along OK, your system may need some good maintenance:
HP and Compaq Desktop PCs - Increasing System Performance Without Adding Memory (Windows Vista)
Restart the Home Network Router
After you complete the maintenance procedures that can be done on your computer, you might consider:
Shut down the computer
Restart your Router -- not a Reset, just switch off the router, wait a few seconds and then switch it back on.
Boot the computer and log in
System Protection
Make sure you have some kick-strong Anti-Virus software running and complete a full scan to make sure there are not any virus bits or malware on the computer. If you need a good, free Anti-Virus software that plays well with others and does a good job, you might take a look at: Avast Anti-Virus . Select the free version unless you want or need the extra security provided by Avast Internet Security (purchased version).
===========================================================================================
Good Luck!
Click the Kudos Star!
It is a great “Thank You” for the HP Experts who are here to help!
Kind Regards,
Dragon-Fur

I suddenly cannot startup Captivate 4 for reason Flash Player for Internet Explorer not installed or older version, but I have verified that Flash Player 16,0,0,235 is installed. Please help.

Hi,
I haven't used my Adobe Captivate 4 for a bit, but when I try to start it up, I get the following message:
"The Flash Player for Microsoft Internet Explorer, is not installed or its an older version.
You will automatically be redirected to the Adobe website to download the latest Flash Player.
Please note that the Adobe Captivate cannot be used until the Flash Player is installed."
Even if I click the OK button and reinstall the Flash Player, I still get the same message, when I try to startup Captivate.
I have verified that I'm running Flash player 16,0,0,235, which is supposed to be the latest version.
I'm running Windows 7 and Internet Explorer 11.
Please help.

The problem is that your version of Captivate 4 needs to be updated with a patch that Adobe used to supply. (I don't have a link anymore to it.)
Captivate 4 was unable to recognise Flash Player versions beyond a certain number. It gives you a misleading error message that makes it look like you have the wrong version of Flash Player. But the real problem is that Captivate needs to be patched to recognise the latest FP versions.
I'm hoping that someone from the Adobe Captivate team will chime in here and give us another link to download the patch. Otherwise, you really might be forced to upgrade to a newer version of Cp. However, if your current projects are being built in Cp4, your next issue will be that if you purchase Cp8 it will NOT be able to upgrade your Cp4 projects. You'd need to download a trial version of Cp5 or 5.5, and do a two-step upgrade.

Internet Explorer not recording scores for SCORMS

I am having a problem with Internet Explorer not recording the scores for SCORMS developped in Captivate 7. A Forum in Moodle suggested that the problem is that Internet Explorer always has an error with the instruction DoBeforeUnload. I can see that this is always causing a problem. Do you have any suggestions or work arounds for this?

I am using Captivate 7 to produce the SCORMS, and the courses are hosted in MOODLE 2.5. The scores are recorded well in google Chrome but not in Internet Explorer. I have been trying out the courses with Internet Explorer 10 and 11 and both produce the same error:
A moodle forum suggested that IE10 and IE11 do not like the command DoBeforeUnload, and need the command BeforeUnload. (I have checked the Moodle SCORM API and the commands and scores are being sent.)

FDF file opening in Internet Explorer--not in Adobe Acrobat Professional XI

Good morning!
I have created a form in Acrobat Professional XI and have a submit button that emails that data back as an .fdf file. This is working as it should.
However, on some of the returned emails, the .fdf file is opening in Internet Explorer--not in the associated file in Acrobat Professional XI.
Is this the default? Is there a way that I can specify that it always opens in Acrobat?
I looked on line, and found where you have to associate that type of file with Acrobat
I have Windows XP
in My Computer--in Tools, Folder Options, File Types, I have where FDF files are associated with Adobe Acrobat.
Are there other changes that need to be made?
We have a work-around--we can import the file data into the form--just takes a little longer.
I tested this before I posted the form online, and it worked perfect. Now that it is online, we are seeing some snags...
As always--Thank you for your help!

Thank you for your quick response!
no--it is an fdf file. Has an .fdf extension.
One difference that I have noticed that the file that is opening correctly (in acrobat) was sent from a gmail account. The file that is opening in internet explorer was filled out in Adobe Reader XI from an outlook email.
This is the window that appears when the file is opened.
On the Tools--the only items that are accessible from this screen is the AddOnTools--not all the tools sets.
Any assistance would be greatly appreciated!

When viewing outlook emails in firefox, links open in internet explorer, not in firefox

when viewing my outlook emails in firefox, when I click on a link the new webpage is opened in internet explorer not in firefox

Thank you - that has solved the problem - links simply open in a new tab in firefox.
Marvellous.

I cant open many website with firefox, there say filter not let open this site, but when i open they with internet explorer not have any problem.

i cant open many website with firefox, there say filter not let open this site, but when i open they with internet explorer not have any problem.

Could you post an example of the filter message?
This article has more information on the filters built in to Firefox: [http://www.mozilla.org/en-US/firefox/phishing-protection/ Firefox Phishing and Malware Protection].
It's possible that you also have a Firefox add-on, or external software, that is filtering what you see. However, we don't have enough information to help identify it yet. If you want to review a list of your add-ons, you can find them under: Help > Troubleshooting Information.

I have photoshop element 11.0 but it's no possible installation (after change pc) because message internet explorer not 4.0. I have IE 11.0 ??? If enregistrement my N° on CD are not valid ???

I have photoshop element 11.0 but it's no possible installation (after change pc) because message internet explorer not > 4.0. I have IE 11.0 ??? If enregistrement my N° on CD are not valid ???

I have photoshop element 11.0 but it's no possible installation (after change pc) because message internet explorer not > 4.0. I have IE 11.0 ??? If enregistrement my N° on CD are not valid ???

HT201270 My ipad is displaying the carrier settings update box but does not respond to either the "update now" button or the "not now" button and has totally frozen. The ipad cannot switch off as I need to clear this box before I can "slide to shut down".

Can anyone help me with carrier settings??? My ipad is displaying the carrier settings update box but will not respond when I press "update" or "not now". I have tried to switch the ipad off, but cannot "slide to shut down" as I need to clear the carrier settings box first!! HELP PLEASE!!!!

Have you tried a reboot? Hold down the power and home buttons simultaneously. Ignore the Slide to Power Off prompt if it pops up. The display should go dark, and the Apple logo should appear as it begins a reboot. This is a soft reboot - it does not erase data.

I need to know what to look for on the toolbar when I am looking for a "secure site icon" such as the locked padlock on Internet Explorer

We are unable to identify when we are on a secure site as we can when using Internet Explorer.

Firefox 3 stil has the padlock in the right corner of the Status Bar (View > Status Bar).<br />
Firefox 4 won't have the Status Bar anymore, so there you only have the site favicon on the location bar showing the domain if there is a secure connection and the website is identified.<br />
Be aware that the presence of a padlock is no guarantee that you are connected to the expected website and that is the main reason for removal of the padlock.
See also [http://www.dria.org/wordpress/archives/2008/05/06/635/ dria.org » Blog Archive » Firefox 3: Site Identification button]

How can i get lock image in internet explorer which is getting in mozilla

hi ,
iam getting the lock image in mozilla for the login page and iam not getting the lock image for the same page which is accessing from internet explorer 6.0 can any one help me out.........thanku

you don't. full screen image is no longer availab.e.

One of the pages in my website will not display the Amazon links to books I sell. Only one book, wiich is not on Amazon displays on the page. On Internet Explorer, all my books display. why?

Ever since converting my website to WordPress the "Recommended Reading" page doesn't display the book I listed that link to Amazon. Only one book linked to another website displays, but not of the Amazon Books.
This does not happen on Internet Explorer. I have asked this question last week but have not received a response.
Can you help? Go to: www.transitionexecs.com and click on "recommended reading" to see what I mean.

Do you have any ad-blocking software?
Those links have ad in the url that might trigger such software.
See:
*http://kb.mozillazine.org/Images_or_animations_do_not_load
Start Firefox in <u>[[Safe Mode]]</u> to check if one of the extensions is causing the problem (switch to the DEFAULT theme: Firefox (Tools) > Add-ons > Appearance/Themes).
*Don't make any changes on the Safe mode start window.
*https://support.mozilla.com/kb/Safe+Mode

What Java to download for my Internet Explorer browser?

Hi,
When I hear that I need Java for my Interner Explorer
browser, which Java package/installer do I need to install:
the Java Runtime Environment ?Java Virtual machine?
I have Internet Explorer 6.0.2.
I want to discard the Microsoft Java Virtual machine
and use the Java from Sun.

usually, you want to install the latest release..and that would be Java 1.5 JRE.
Having the lastest JRE means that you can run the most updated application written in 1.5 and compiled in 1.5.
however, i noticed that after installation of the Tiger JRE, Java applet seems to load much slower (take twice to three times longer than using 1.4.2)...so, for me..i removed 1.5 and reinstalled 1.4.2 on my computer
PIII 733 mhz, 384 MB SDRAM, 30 GB HD
Window XP Pro (SP2 installed)

Internet Explorer stops responding while using CodedUI test builder to record a test

Hi,
Here is my problem description:
Internet explorer (9, 10, 11) stops responding while using CodedUI Test Builder to record a test scenario in IE. I am not able to input any values or click any buttons or perform any action on IE while recording a test on a remote desktop (visual studio
and IE are both on remote machine). Also tried by directly accessing the machine but no luck. The test builder says 'could not record the last action...'
A hand-coded script plays back fine without any problem.
System Details:
OS: Window 7 Professional with SP1 64-bit
Browser: IE 11 (tried with IE 9/10 also with no luck)
Visual Studio 2013 Ultimate Edition
I have tried the following from my past similar experiences.
1. Checked that I am recording on 32 bit IE
2. Tried with IE 9/10/11
3. Reset IE to factory settings
I will appreciate if someone can share some thoughts on the likely problem(s) and any recommended solution.
Regards,
Pankaj

Hi Pankaj,
>>'could not record the last action...'.
Actually it means that the coded UI test builder doesn't record the actions, I met this issue before when my machine is so busy, so I will get this issue if I record the steps so quickly.
I'm not very sure that how you connect to your remote desktop and record the actions, but like the above actions, we have to make sure that the steps were recorded in the Recorded Action window like A.
If not, please delete the steps from the no-recorded steps and re-record them again, maybe you could record the steps slowly.
I doubt that the remote connection impacts the recorded actions performance.
Best Regards,
Jack
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

Internet Explorer not connecting off mobile hotspot

I have had my phone for a year. I have not had any problems with my hotspot until recently. Internet Explorer gives an error message that website can not be displayed. I have tried to go to different websites and get the same error. At first I thought it was my desktop computer. However, when I attempt to connect on my netbook I get the same error, along with my Nook. The issue appears to be coming from the droid device. I have checked my connection and the test comes back connected and I have full bars. Any suggestions on how to fix would be great. Otherwise I am paying for service I can't use. The only recent change that has occurred is my area finally got 4G.

Hi Tbuice!
That's not good! I know how important it is to have a properly working device at tall times. Let's get this fixed. Have you made an recent changes to the device like new applications, or a software update? Any recent monthly voice or data plan changes? Does the web browser on the device work? Keep me posted.
Thanks,
Pamelaf_vzw
Tweet us@vzwsupport

DISPLAY PODs OK - locked for input - internet explorer not responding

Similar Messages

Maybe you are looking for