Display Problem in CDE (Sun Solarish 8 Intel Edition )

Hello friends ,
I am using Sun Solarish Intel Edition on my pc .
I am using Windows XP, Red Hat Linux and Solarish
on a single pc ( Dual Boot) .
My Probems are :-
( 1) .
In Windows and Linux it will shome me perfect Diaply (256 color ) 24 bit but in Solarish it only support me 16 color .I have Sis 6326 card and ViewSonic E653 Model
(2) . How do you connect with internet and configure modem
Please Give me proper sulution on below emails :-
1> [email protected]
2> [email protected]
thaknig you in Advance
Piyush Patel

hai ....I am very sorry to say that .... SIS CARD doesn`t upport solaris ... i practically faced soo many issues of these kinds.if possible use cirrus logic card will give you good performance.
regarding ......internet ... check your modem competiability and configure it first .. thaen go ahead..
good luck.
konda

Similar Messages

Older intel mac display problems (x1600)

My mom has an intel imac (the version before the black/aluminum kind) and it had very minor display issues with Tiger (very infrequent horizontal lines). They were all resolved with further point releases of Tiger.
After upgrading to Leopard she has had numerous problems, all revolving around frequent and numerous horizontal lines. They sometimes get so bad that the current window is almost completely obscured.
Here is a flickr set of images that show the problem and the display specs. I know that was happening to users with newer imacs and x1900s, is this happening to other x1600 users?
Any ideas on what is going on? I told her to call apple, but her warranty has run out and she feels uncomfortable calling because she is not a technical person (exactly why I told her to get a mac—I have egg on my face now). Should she downgrade? Can this be a hardware problem?

Hi everyone, i have bought an iMac 20 with a core 2 duo 1 GB ram and an ATI x1600 (a white one, because the screen quality is better than the new iMac 20 alu)
and i've some display problems. First i was on Tiger and i didn't noticed any problems but as leopard came out i rapidly upgraded to it and then came problems with the display.
To make short, the lower part of my screen is lagging anormaly. When i drag a window or even the dock's animations are slower. And it doesn't occur on the upper part of my screen, windows can be dragged smoothly, there is no lag even if the CPU is working at 100% (like on every normal mac...).
I've noticed there is a little bump when i'm dragging a windows from the top to the bottom of the screen, it's like the window enter another area.
I've of course checked a lot of boards on the www, so i've tried a lot of things, my card ATI X1600 128mo PCIe is fully working with core image and quartz extreme.
Some people said to wait that spotlight finished to index, but it's done and the problems are still there.
Time machine is off
I don't use coverflow and i've tried it, it doesn't change anything.
I've also re-installed Tiger and, wo-ow the problem is still there, especially when all is up to date.
It seems that, the problem come from the last firmware update, i don't know if this firmware update was done for improving compatibility with bootcamp or leopard but for me it has added this strange display behavior.
I've also tried to turn off quartz extreme, and it's even worst, worst on the lower part again but no changes on the upper, everything run smoothly.
As i didn't noticed it when i used my mac for the first days (on Tiger and without the firmware update) and on windows with bootcamp there is still no display problems at all, i keep thinking it's not an hardware problem but a software (firmware, display on Mac osX) problem.
It should be solved by a new firmware or Mac os upgrade until then i have to do with it.
By the way, does anyone knows if there's a way for downgrading the gpu firmware ? (when i try, it say that i didn't need it), it's the only thing that i havent tried.
Thanks in advance, and i beg your pardon for my pittyfull frenglish :s

Display problems with Kwin on intel hardware

Hi all,
Since the latest update of xorg and intel drivers, I have a display problem with kwin's expose-like feature. Before I file a bug,
- Is anyone experiencing the same problem? Do you have a workaround?
- Does anyone know what could be at fault?

lardon wrote:
panosk wrote:Indeed... If you want to fill a bug report right now go ahead, otherwise I have to get to my laptop in a few hours to check logs and post a report then. BTW, could you also try Ctrl+F11 and rotate the cube for a while? You should notice some flashes and very bad performance, even with direct rendering.
I will, and I hope you'll contribute your logs to the bug report! The question is where to submit it: I'm pretty sure the bug is upstream, but is it a kwin bug or an xorg/intel bug?
Ctrl+F11 works "fine" on my system, even though it crashed kwin the first time I tried it :-)
Well, that's a very tough question! I was thinking to fill a bug report in Arch's bugtracker, although I also think it is an upstream bug. Problem is, after reading this http://blog.martin-graesslin.com/blog/2 … paces-4-5/ and this http://www.itnewstoday.com/?p=1803, one can realize the absolute *Mes(s)a * that dominates the whole graphics stack....

Messages to /dev/sysmsg and /dev/console are displayed on the CDE Desktop

I noticed that after reboots any message sent to /dev/sysmsg or /dev/console is displayed to the CDE Desktop (wallpaper). After I log out then log back in the problem disappears. This happens in global zones only and not in a non-global (local) zone.
(the only service I see with "svcs -xv" is the Print Service)
To repeat the problem I have to do the following:
1. Reboot (init 6)
2. Login to the CDE as a user.
3. Open an Xterm window, and in the windows, "su" to root
4. Observe a "su on ..." message on the CDE desktop in big white "OBP" looking mono-spaced text.
5. Log out of the CDE
6. Login to the CDE as a user.
7. Open an Xterm window, and in the windows, "su" to root
8. Problem has disappeared, no more logging of console like messages to the CDE desktop.
As well, if I do something like this after I reboot, and on 1st log in:
echo "Hi there" > /dev/console
echo "Another Hello" > dev/sysmsg
I'll see both messages print to the Desktop of the CDE. If I log out and log back in, I will no longer see this kind of behavior.
My Hardware: Sun Netra CP3260
My Software: Sun Solaris 10 5/08 Update 5 with 137137-09
Additional info:
/etc/syslog.conf - does have a line that directs some output to /dev/sysmsg
/etc/default/su - does list: CONSOLE=/dev/console
I did comment out the above two lines in my syslog.conf and /etc/default/su, and the behavior goes away, however this is a workaround and not a fix of the issue.
Any ideas?
Brian Jester
Edited by: BrianJester on Apr 30, 2010 12:11 PM
Edited by: BrianJester on Apr 30, 2010 12:22 PM

Yes, I know this is an old post, but I’m trying to clean them up.
Without your PowerShell script is will be impossible for anyone to answer this.
Garth Jones | My blogs: Enhansoft and
Old Blog site | Twitter:
@GarthMJ

Wierd lines on my display and frequent lock-ups w/ and w/o display problems

When booting I sometimes get weird lines and blocks on my display (the GRAY Apple screen) and then it hangs, other times the computer will boot and run fine for 20-30 minutes and then the display goes wonkers with blocks and lines and the computer does not respond. The only way I can get it to boot is to reset the PRAM by letting it CHIME 3x and then occasionally it will boot without issue and run, while other times I still get the blocks and lines on the display.
When I am able to get it to recover and re-boot after the lock-up and display problems and occasionally the box in the middle asking me to re-boot similar to a kernel panic the OPS gives me the option to REPORT the error and here is the error for others who would know more...
Thank you in advance,
Darren
Interval Since Last Panic Report: 104960 sec
Panics Since Last Report: 5
Anonymous UUID: 7D1AEF43-7E19-4F58-A1E0-48FA992A2814
Wed Nov 18 15:49:50 2009
panic(cpu 0 caller 0x9cdb10): NVRM[0/1:0:0]: Read Error 0x00009410: CFG 0xffffffff 0xffffffff 0xd2000000, BAR0 0xd2000000 0x5d3e2000 0x084700a2, D0, P1/4
Backtrace (CPU 0), Frame : Return Address (4 potential args on stack)
0x5c99b7d8 : 0x21b2bd (0x5cf868 0x5c99b80c 0x223719 0x0)
0x5c99b828 : 0x9cdb10 (0xbb7fec 0xc209c0 0xbc3660 0x0)
0x5c99b8c8 : 0x147690d (0x8b5ac04 0x7edf004 0x9410 0xabd962)
0x5c99b908 : 0x1534e6a (0x7edf004 0x9410 0x5c99b968 0x9)
0x5c99b948 : 0xb51ca5 (0x7edf004 0x91ed004 0x0 0x0)
0x5c99b968 : 0xac155b (0x91ed004 0x5c99baa4 0x0 0x0)
0x5c99b9b8 : 0x145f290 (0x7edf004 0x3d0900 0x5c99baa4 0x0)
0x5c99bad8 : 0xab2821 (0x7edf004 0x91cf004 0x815200c 0x200)
0x5c99bb18 : 0xb1f172 (0x7edf004 0x91cf004 0xeb9bcc0 0xeb9bc04)
0x5c99bbc8 : 0xb202db (0x7edf004 0x91f0404 0x0 0x0)
0x5c99bc58 : 0x14bb7a3 (0x7edf004 0x91f0404 0x9 0x2)
0x5c99bd68 : 0x14ed407 (0x7edf004 0x91cf404 0x0 0x0)
0x5c99be98 : 0xad3934 (0x7edf004 0x91ca404 0x0 0x0)
0x5c99bec8 : 0x9d61fb (0x7edf004 0x91ca404 0x0 0x0)
0x5c99bf08 : 0x5491b5 (0x0 0x9499680 0x1 0x29c50a)
0x5c99bf58 : 0x5481e6 (0x9499680 0x1 0x5c99bf88 0x547d9d)
0x5c99bf88 : 0x548640 (0x8abaf00 0x7e9ecc0 0xe780850c 0x2a6e5f)
0x5c99bfc8 : 0x29d68c (0x8abaf00 0x0 0x10 0x88bbfc4)
Kernel Extensions in backtrace (with dependencies):
com.apple.nvidia.nv50hal(6.0.6)@0x136b000->0x17f1fff
dependency: com.apple.NVDAResman(6.0.6)@0x96f000
com.apple.NVDAResman(6.0.6)@0x96f000->0xc21fff
dependency: com.apple.iokit.IOPCIFamily(2.6)@0x932000
dependency: com.apple.iokit.IONDRVSupport(2.0)@0x961000
dependency: com.apple.iokit.IOGraphicsFamily(2.0)@0x943000
BSD process name corresponding to current thread: kernel_task
Mac OS version:
10C540
Kernel version:
Darwin Kernel Version 10.2.0: Tue Nov 3 10:37:10 PST 2009; root:xnu-1486.2.11~1/RELEASE_I386
System model name: MacBookPro3,1 (Mac-F4238BC8)
System uptime in nanoseconds: 3788331456483
unloaded kexts:
com.apple.driver.AppleFileSystemDriver 2.0 (addr 0xf02000, size 0x12288) - last unloaded 94521475551
loaded kexts:
org.virtualbox.kext.VBoxNetAdp 2.2.2
org.virtualbox.kext.VBoxNetFlt 2.2.2
org.virtualbox.kext.VBoxUSB 2.2.2
org.virtualbox.kext.VBoxDrv 2.2.2
com.bresink.driver.BRESINKx86Monitoring 5.0
com.pctools.iantivirus.kfs 1.0.1
com.apple.driver.AppleHWSensor 1.9.2d0 - last loaded 31800108689
com.apple.filesystems.ntfs 3.1
com.apple.filesystems.autofs 2.1.0
com.apple.driver.AppleHDA 1.7.9a4
com.apple.driver.AirPort.Atheros 412.19.4
com.apple.kext.AppleSMCLMU 1.4.5d1
com.apple.driver.SMCMotionSensor 3.0.0d4
com.apple.DontSteal_Mac_OSX 7.0.0
com.apple.driver.AudioIPCDriver 1.1.2
com.apple.driver.AppleIntelMeromProfile 19
com.apple.driver.ACPISMCPlatformPlugin 4.0.1d0
com.apple.driver.AppleLPC 1.4.9
com.apple.driver.AppleBacklight 170.0.14
com.apple.driver.AppleUpstreamUserClient 3.1.0
com.apple.GeForce 6.0.6
com.apple.driver.AppleUSBTrackpad 1.8.0b4
com.apple.driver.AppleUSBTCKeyEventDriver 1.8.0b4
com.apple.driver.AppleUSBTCKeyboard 1.8.0b4
com.apple.iokit.SCSITaskUserClient 2.6.0
com.apple.BootCache 31
com.apple.AppleFSCompression.AppleFSCompressionTypeZlib 1.0.0d1
com.apple.iokit.IOAHCIBlockStorage 1.6.0
com.apple.iokit.AppleYukon2 3.1.14b1
com.apple.driver.AppleAHCIPort 2.0.1
com.apple.driver.AppleSmartBatteryManager 160.0.0
com.apple.driver.AppleIntelPIIXATA 2.5.0
com.apple.driver.AppleUSBHub 3.8.4
com.apple.driver.AppleFWOHCI 4.4.0
com.apple.driver.AppleUSBEHCI 3.7.5
com.apple.driver.AppleUSBUHCI 3.7.5
com.apple.driver.AppleEFINVRAM 1.3.0
com.apple.driver.AppleRTC 1.3
com.apple.driver.AppleHPET 1.4
com.apple.driver.AppleACPIButtons 1.3
com.apple.driver.AppleSMBIOS 1.4
com.apple.driver.AppleACPIEC 1.3
com.apple.driver.AppleAPIC 1.4
com.apple.security.sandbox 0
com.apple.security.quarantine 0
com.apple.nke.applicationfirewall 2.1.11
com.apple.driver.AppleIntelCPUPowerManagementClient 96.0.0
com.apple.driver.AppleIntelCPUPowerManagement 96.0.0
com.apple.driver.DspFuncLib 1.7.9a4
com.apple.driver.AppleProfileReadCounterAction 17
com.apple.driver.AppleProfileTimestampAction 10
com.apple.driver.AppleProfileThreadInfoAction 14
com.apple.driver.AppleProfileRegisterStateAction 10
com.apple.driver.AppleProfileKEventAction 10
com.apple.driver.AppleProfileCallstackAction 20
com.apple.iokit.IOFireWireIP 2.0.3
com.apple.iokit.IO80211Family 310.6
com.apple.iokit.IOSurface 73.0
com.apple.iokit.IOBluetoothSerialManager 2.2.4f3
com.apple.iokit.IOSerialFamily 10.0.3
com.apple.iokit.IOAudioFamily 1.7.2fc1
com.apple.kext.OSvKernDSPLib 1.3
com.apple.driver.AppleHDAController 1.7.9a4
com.apple.iokit.IOHDAFamily 1.7.9a4
com.apple.iokit.AppleProfileFamily 41
com.apple.driver.AppleSMC 3.0.1d2
com.apple.driver.IOPlatformPluginFamily 4.0.1d0
com.apple.nvidia.nv50hal 6.0.6
com.apple.NVDAResman 6.0.6
com.apple.iokit.IONDRVSupport 2.0
com.apple.iokit.IOGraphicsFamily 2.0
com.apple.driver.CSRUSBBluetoothHCIController 2.2.4f3
com.apple.driver.AppleUSBBluetoothHCIController 2.2.4f3
com.apple.iokit.IOBluetoothFamily 2.2.4f3
com.apple.iokit.IOUSBHIDDriver 3.8.4
com.apple.driver.AppleUSBMergeNub 3.8.5
com.apple.driver.AppleUSBComposite 3.7.5
com.apple.iokit.IOSCSIMultimediaCommandsDevice 2.6.0
com.apple.iokit.IOBDStorageFamily 1.6
com.apple.iokit.IODVDStorageFamily 1.6
com.apple.iokit.IOCDStorageFamily 1.6
com.apple.driver.XsanFilter 402.1
com.apple.iokit.IONetworkingFamily 1.9
com.apple.iokit.IOATAPIProtocolTransport 2.5.0
com.apple.iokit.IOSCSIArchitectureModelFamily 2.6.0
com.apple.iokit.IOAHCIFamily 2.0.2
com.apple.iokit.IOATAFamily 2.5.0
com.apple.iokit.IOUSBUserClient 3.8.5
com.apple.iokit.IOFireWireFamily 4.1.7
com.apple.iokit.IOUSBFamily 3.8.5
com.apple.driver.AppleEFIRuntime 1.3.0
com.apple.iokit.IOHIDFamily 1.6.1
com.apple.iokit.IOSMBusFamily 1.1
com.apple.kext.AppleMatch 1.0.0d1
com.apple.security.TMSafetyNet 6
com.apple.driver.DiskImages 281
com.apple.iokit.IOStorageFamily 1.6
com.apple.driver.AppleACPIPlatform 1.3
com.apple.iokit.IOPCIFamily 2.6
com.apple.iokit.IOACPIFamily 1.3.0
Model: MacBookPro3,1, BootROM MBP31.0070.B07, 2 processors, Intel Core 2 Duo, 2.2 GHz, 4 GB, SMC 1.16f11
Graphics: NVIDIA GeForce 8600M GT, GeForce 8600M GT, PCIe, 128 MB
Memory Module: global_name
AirPort: spairportwireless_card_type_airportextreme (0x168C, 0x87), Atheros 5416: 2.0.19.4
Bluetooth: Version 2.2.4f3, 2 service, 0 devices, 1 incoming serial ports
Network Service: AirPort, AirPort, en1
PCI Card: pci168c,24, sppci_othernetwork, PCI Slot 5
Serial ATA Device: ST9320421ASG, 298.09 GB
Parallel ATA Device: MATSHITADVD-R UJ-857E
USB Device: Built-in iSight, 0x05ac (Apple Inc.), 0x8502, 0xfd400000
USB Device: Apple Internal Keyboard / Trackpad, 0x05ac (Apple Inc.), 0x021a, 0x5d200000
USB Device: Bluetooth USB Host Controller, 0x05ac (Apple Inc.), 0x8205, 0x1a100000
Anyone know what is causing my problems? I thought it was heat so I downloaded a CPU and FAN temperature monitor and the CPU was getting VERY HOT at first so I then ramped-up the CPU FAN SPEED to maximum - it turns out the CPU FAN was not rotating well at low speed - since then I have cleaned and checked the fans and they all work as they should and blow on high(er) when the CPU temperature is above a certain level.

S.U.
Is there a kb article or something that would illuminate what to look for in these logs, or is it a matter of learning by osmosis?
Both. I am not skilled in reading logs. It is a very technical and time consuming task for the uninitiated (me!) In scanning a log I look for the backtrace and loading dependencies. The first item in the backtrace is usually the roadblock.
Beyond that you can look at the Technical Note TN2063: Understanding and Debugging Kernel Panics
Should make for good bedtime reading. Puts you right to sleep.
c

Macbook and HP 2510i monitor display problem - help

Hello,
I am having display problem with my Macbook (Intel) and my 25'' HP 2510i monitor via DVI.. Until last monday I do not have any problems and my monitor was working flawless with my macbook.. Last monday I used the monitor with my HP Notebook to try Windows 8 on large screen. And after that try when I connect the monitor back to Macbook there is no display.. I tried the steps below
- I connected Macbook to my Phillips Plasma TV and it worked (no error with display card of Macbook or the wire or the adaptor)
- I connected the monitor back to HP laptop it worked.. (so no error with the monitor)
- I unplugged monitor to cut electricity and tried.. nope not working
- I did several tricks with macbook no effect
- I reinstalled Mountain Lion .. no effect
- I formatted Macbook, reinstalled Snow Leopard.. Not working.. I installed back Mountain Lion .. not working
Whatever I tried the HP2510i is not displaying, mirroring my Macbook..
Any help will be appreciated
Thanks

My graphic card details;
NVIDIA GeForce 9400M:
Chipset Model:          NVIDIA GeForce 9400M
Type:          GPU
Bus:          PCI
VRAM (Total):          256 MB
Vendor:          NVIDIA (0x10de)
Device ID:          0x0863
Revision ID:          0x00b1
ROM Revision:          3462

Display problem

Product name-15-p001TX
Operating systems-Windows 8.1
Respected to whom so ever is concern,
In my notebook pc i have an display problem, some times while working on it, it blinks automatically. sometimes it is bright and some times it is lite. The coustmer care had asked me to download intel high defination(HD) graphics driver and nvida graphics driver. i have downloaded intel high defination(HD) graphics driver but it had not insatlled on my laptop the error occured was that " the system does not meet the minimum requriements." now i am downloading nvida graphics driver which is of about 434 MB.
So i request you to please give me proper solution to my problems. i request you to provide my correct solutions as soon as possible. my mail id is [edited personally identifiable information] and my mob no is [edited personally identifiable information].
Thank you.

Hello @Ronny123 welcome to the HP Forums.
I see that you're having a display problem, that you've spoken to support and they were having you update the drivers. I will try to assist you with this.
The steps that you were provided are on the correct path, as you ran into an issue with this. Please trying installing the following drivers while in Safe Mode.
Intel High-Definition (HD) Graphics Driver
NVIDIA Graphics Driver
Please ensure that you install them in that order.
If you run into the same problem in Safe Mode, start the computer back up normally and try the steps provided in this document: Display Quality Issues.
If those both fail, do a system refresh: Refresh Your PC to Resolve Problems (Windows 8).
Let me know if any of the above was able to help you with this issue.
Thank you for posting on the HP Forums.
I worked on behalf of HP.

Display problem - blue tinge, low res

My first gen 20" intel imac has an odd display problem.
The screen has a light blue tinge to it which show up particularly clearly in finder windows which i have set to display white. I've played around with brightness/contrast settings as well as colour calibration but to no avail.
This problem started a few months ago when it would periodically flick between being normal and this blue tinge. For the last few weeks the blue tinge is all I get.
The other symptom seems to be a reduction in resolution in 'blue tinge mode' which is particularly noticeable when watching movies.
Does anyone out there have any ideas?

does this problem occur on external screen?
Regards,
Jin Li
May this year, be the year of 'DO'!
I am a volunteer, and not a paid staff of Lenovo or Microsoft

Display problem - horizontal stripes appear sometimes

I've got display problem. Horizontal stripes appear sometimes (randomly?) on movies or just desktop and stop when I change screen resolution to other and switch back to 1080p. It only happens with my iiyama xb2472hd via hdmi. Everything is fine using Windows. I've tried other monitor via hdmi and the problem doesn't occur.
Any ideas how to find source of problem?
Here is video:
http://youtu.be/dV2d44njQXg
My hardware:
Iiyama XB2472HD + Lenovo y580 which is using Intel HD Graphics 4000 as display device

After months of having this problem I realized that it occurs only with that monitor (Iiyama XB2472HD but probably others too) when I turn it off and than on (after some time) while Arch is still running...
Common situation: I lock the screen in KDE than turn off the display using capacitive button on the device. When I come back after few hours and turn it on the stripes appear. Switching to other screen resolution for a while makes it fix.
Could it be some synchronization problem or something like that?
Have someone any idea how to debug it ?
I believe that someone (kernel developers or Iiyama) made some bad assumptions while implementing HDMI standard...
Last edited by rstadmin (2013-09-04 21:24:41)

MacBook Pro and Cintiq 12UX display problems?

Hi,  
I'm not sure if this is the right place to post this so I'm sorry if it isn't - this is just the only place I could think of to ask about a display problem?
I’ve just got the new model Cintiq 21UX, and I’m running it off one of the newer model MacBook Pro’s (using Apples adapter to connect the two).
Everything seems to be working fine, although on the Cintiq’s screen I get flickering green pixels in darker areas of the screen? The confusing thing is it doesn’t happen all the time, it just seems to be the one particular ‘shade’ of dark grey/dark tones it happens on - an example is if I move an image around then its the same area of colour it has problems with across the screen, or if I zoom in the effected area gets bigger etc. I can also edit the colour to a slightly different shade and the problem stops so it can’t be a dead/frozen pixel. If I turn on the mirror display option it is still only the Cintiq display that is effected.
I currently run the MacBook using the Nvidia 9600M GT, I did try switching to the 9400M but it made the situation a lot worse and caused green pixels lines to flash horizontally across the screen.
I can save the image or drag the window that the problems happening on and drag it back to the MacBooks’ screen and there is no problem with the pixels there - it’s only on the Cintiq display.
I was just wondering if this is either a fault with the Cintiq tablet itself, or possibly a problem with the MacBook?
If it’s useful the spec of the MacBook is: 
Late 2008 unibody 15.4”
Mac OS X v10.6.3 Snow Leopard
2.8 GHz Intel Core 2 Duo
4 GB 1067 MHz DDR3
Nvidia GeForce 9600M GT & 9400M
I’m not sure what other spec would be of use but if theres more I can let you know.
Any help would be appreciated, as it works fine other than this occational green flicker, and it’ll cost me a lot to send of either the Cintiq or the MacBook off for a service or replacement in the UK?
Cheers!

It could just be bad. Do you have another computer to try it with?

Display problems Equium P200-1ED

My computer indicates that to show a screensaver I need a new video card or one that is compatible with Direct 3D. When I update my display to Mobile Intel (R) 965 Express Chipset Family on restart the screen splits in two and pixilates. I restart in safe mode and find that in the Device Manager it reports that the Display Adapter has two copies of Mobile Intel (R) 965 Express Chipset Family installed.
The only way I can get back to a stable screen is to uninstall this driver which is then reported as missing by Windows.
How can I install A display driver and video controller which gives me a stable display?

Sorry mistyped meant to write 'stable display'.
Windows update telld me to install Mobile Intel (R) 965 Express Chipset Family as a display driver, when I do this on restart my screen splits into 2 with what should be the left side on the right and vice versa. If i move the mouse the screen pixilates and it's impossible to work.
When I uninstall Mobile Intel (R) 965 Express Chipset Family the Device Manager shows no Display but it does show 'Other devices' called 'Unknown device' and ''Video controller'. If i allow Windows to update drivers for these devices it simply puts Mobile Intel (R) 965 Express Chipset Family back into the Display and I'm back with the same problem.
Thanks

Bootcamp display problems - aluminium iMac

Hi
I have an aluminium iMac and I have recently installed windows on it. Everything went fine but there seems to be a problem with the display driver?
What happens is that when I'm doing something, the computer seems to freeze (music lags) then the display goes black and the computer runs as normal (the music starts playing normally again.)
I thought it was only when I was playing Counter Strike Source but it happens when I'm not too. Is anyone else experiencing this? Any fixes/ suggestions?
I've tried repairing bootcamp drivers but to no avail.
Thanks

I was having Display Problems on my Intel 20" iMac- weird artifacts, lines, distortion of parts of the screen, weird color patterns, etc... all seemed to happen mostly during viewing video on the computer.
I worried that it was the card itself, and after about 4-5 years of use, was simply going bad-- and some articles and posts I found online seemed to confirm that this was possible--
I kept reading and eventually found posts about using smcFanControl to raise the fan rpm manually to try to keep things cooler in there... It seemed to work somewhat but not really, and the artifacts would continue and the computer itself was hot. The temp was usually constantly around 145F with lots of artifacts and distortion. When it wasn't running video or being used a lot, it would cool down and the artifacts would wane.
I found a step by step guide on ifixit.com to opening the iMac body to replace various components, etc. so I got the bright idea of opening it and blowing it out with compressed air.
It wasn't that hard to open and the guide was easy to follow, I went as far as removing the screen, which exposed one side of the guts and the fans. I blew it all out, it was dusty in there, and a lot of dust came out.
I put it all back and am running a netflix movie- temp is staying at about 125 +- and there are no artifacts...!!
I think I might have actually fixed it-- If you have a mac that is running hot and has weird screen artifacts, behavior, etc... I suggest dusting it and blowing out vents, fans, etc to allow it to run cooler....
Oh, My computer is way out of warranty, and I don't have AppleCare, and everything is backed up, etc... open at your own risk, knowing you will probably void any warranty.

Having some problems with t61 display problems..

i am using a intergrated graphic card for the t61...
but what i dont understand is when i install the latest drivers through lenovo download site for the graphic card, there will be some display problems when i set to screen resolution to 800x600 or 1024 the whole screen will tend to be very small and not stretch properly according the the screen..
however i uninstall the latest drivers and went to intel to install the older drivers for the intergrated gfx.. after that everyday work properly..
when i had the latest drivers when i play games like warcraft or counterstrike the screen will also go very small however after using the old graphic card, the problem did not occur... can anyone tell me how do i install the latest drivers because i believe the older driver is not really expanding the gfx to the max.. thanks..

random reboots are quite common
try updating the software before you do anything else.
If i have helped at all a click on the white star below would be nice thanks.
Now using the Lumia 1520

10.4.5 Update is out and fixes display problems.

For all who have not updated yet:
You can either on Apple.com/support/downloads get the Intel 10.4.5 update or the blue Apple in the left top corner of the screen click it and then software update.
This will list all available updates depending on what is on your MAC.
There is several Imac Intel users reporting fixes for their display problems ect. after installing the update + restarting.

This fixes the problems except maybe for the 20" 256mb vram ones ????
www.hardmac.com reports still some problems on one of theirs.

X230i display problem.

Hello! I've got a problem with imaging on му ThinkPad x230i (TN matrix, core i3 2370m, Intel HD 3000, Windows 7 x64). There are ripples when changing an angle and/or when moving the screen corresponding eyes. Besides, cursorial pixels appear around the Windows slot when moving. This problem is described here "http://forums.lenovo.com/t5/IdeaPad-Y-U-V-Z-and-P-series/Widespread-Y560-Display-Problem/td-p/238949..." in details. Also it is shown on this video "http://www.youtube.com/watch?v=Ikm9aaLcDHk". It is about different model (y560) on the video but I have the same challenge. In the y560 model, the problems had been decided by the BIOS updating.
Should I wait for the BIOS updating for the x230i or do I have to contact the Service?
Has anybody this problem?

Hi, Legate
What version of BIOS are you currently running? The latest version is 2.06 and was released earlier this month. If you haven't already, I would definitely recommend making sure your BIOS is up to date before contacting support, especially if it solved the error you are facing on another machine.
Best,
Adam
Did someone help you today? Press the star on the left to thank them with a Kudo!
If you find a post helpful and it answers your question, please mark it as an "Accepted Solution!" This will help the rest of the community with similar issues identify the verified solution and benefit from it.

Display Problem in CDE (Sun Solarish 8 Intel Edition )

Similar Messages

Maybe you are looking for