Display problem in my hp pavilion -15e015tx the screen blinks and get freeze for a second

i am using hp pavilion 15-e015tx running window 8 i had complained on 18 oct 2014 regarding the display problem. my case id is 4739018980. till now the issuse is not solved. the engineer came , checked the laptop and said quotation will be send within few days and tookaway his service charges Rs.1400. Still waiting for the quotation .every time i call in hp support service they tell they will send quotation the same day but there is no response. pls send the quotatiom as soon as possible. i am feedup calling hp support care now.
"very bad support service"
"3rd class customer service"

Hi @Poo0507 ,
I just sent you a private message. If you are not sure how to check your forum messages this post, has instructions.
Please click “Accept as Solution ” if you feel my post solved your issue.
Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
Thank you,
BHK6
I work on behalf of HP

Similar Messages

  • APPHANGB1 when browsing the web, or just keeping it open. Happens once in a 5 minutes, and it freezes for 30 seconds. I found many people who have this problem too ....

    APPHANGB1 when browsing the web, or just keeping it open. Happens once in a 5 minutes, and it freezes for 30 seconds. I found many people who have this problem too ....

    Odds are only someone that develops apps for iOS would have access to whatever this is and, even then, this information may still not be available.
    I would do a backup of your phone & then erase it and restore from the backup to see if the odd behavior goes away. If so, something went funny with your update the first time around. If not, there's something in your backup that's making the phone throw a fit.
    I resolved my battery issues (more or less) by disabling the "set date/time automatically" setting. I haven't re-enabled it yet but my battery life has been much better with it off.
    ~Lyssa

  • I hit the power button and it runs for a second then turns off but the power buttton stays lit

    i hit the power button and it runs for a second then turns off but the power buttton stays lit

    What machine?
    Mac Pro? Mac Pro what?
    If Mac Pro, wrong forum. Go here:
    Mac Pro

  • My Ipad (4?) screen went black but I can hear it. I tried hitting both the sstart button and sleep button for 10 seconds and the apple icon comes up, my screen saver shows for 1 second and it returns to black screen again. I can hear SIRI. How do I fix?

    I had been using the IPAD and all of a sudden it started talking back to me and when swiping apps to close them they would not close. She (the IPAD) kept talking back to me such as "use three fingers" etc. Then the screen went blank and if I touched it I could get it to beep at various touch points. SIRI would also communicate, but the screen stayed black.
    As was suggested here, I tried getting a reboot by holding the sleep key with the home key and after 10 seconds the apple logo shows and 5 seconds later my screen saver comes on for just one second, and then it goes back to a black screen. SIRI tells me shes not available and someone else, must be her sister, says things like 90%, 85%, 80% if I continually swipe the screen. Can anyone help me?

    Hello, Juniorjr2. 
    Thank you for visiting Apple Support Communities.
    This sounds like screen curtain may be enabled.  Screen curtain is a feature that allows display privacy.  To disable screen curtain while VoiceOver is enabled, you can three finger triple tap the screen to disable this feature.  You may need to press the home button once in order to process these steps.  If you wish to disable VoiceOver, see the link in the article below.
    iOS: Configuring accessibility features
    http://support.apple.com/kb/HT5018
    If the issue persists, try reaching out to us here. 
    Cheers,
    Jason H. 

  • Cant reset ipod touch... when i try to reset... the  screen blinks, and it makes a camera sound ???/ any ideas

    when i try to reset ipod by holding home button, and the lock button on top... my screen flashes and makes  a camera sound... but my touch doesnt have a camera ???

    hahaha what you're doing is taking a photo of your device screen..That's not actually a problem, That's Normal..
    here's what you should do.
    Try pressing the restart/off button only, wait for seconds until the "Slide to Power Off" appears. Do no press the home button. After you turned off your device, try pressing once the Power button again to turn your device On.

  • I have a problem with my new Apple Air. It usually takes few seconds for the laptop to be untouched in order to be locked. So sometimes when the screen starts to get dim in order to lock, I immediately touch the keypad to avoid locking the laptop

    I have a problem with my new Apple Air. It usually takes few seconds for the laptop to be untouched in order to be locked. So, sometimes when the screen starts to get dim in order to lock, I immediately touch the keypad to avoid locking the laptop, the result is a black screen appears with no responding to anything from pressing the keyboard to pressing the touchpad. It takes few minutes for the laptop to open again and then a message appears saying that there was a problem with the lock security.
    What is happening exactly?

    It sounds like your sleep timers are set to too low of a value.  Go to System Preferences -> Energy Saver and set both timers to longer times.  The computer sleep timer should be a longer time than the display sleep timer.

  • My Mozzilla crashed: "We're Sorry....Firefox had a problem..." I download the new version and it is still giving me the crash report.

    My Mozzilla crashed: "We're Sorry....Firefox had a problem..." I download the new version and it is still giving me the crash report.
    I tried to loading in "safe mode" but I still could not open Firefox.
    I never received a crash i.d.

    It is possible that there is a problem with the files [http://kb.mozillazine.org/sessionstore.js sessionstore.js] and sessionstore.bak in the [http://kb.mozillazine.org/Profile_folder_-_Firefox Profile Folder]
    Delete [http://kb.mozillazine.org/sessionstore.js sessionstore.js] and sessionstore.bak in the [http://kb.mozillazine.org/Profile_folder_-_Firefox Profile Folder]
    * Help > Troubleshooting Information > Profile Directory: Open Containing Folder
    If you see files sessionstore-##.js with a number in the left part of the name like sessionstore-1.js then delete those as well.
    Deleting sessionstore.js will cause App Tabs and Tab Groups to get lost, so you will have to create them again (make a note).
    See:
    * http://kb.mozillazine.org/Session_Restore

  • My Ipod touch recently fell into water, but once dried, it worked with seemingly little to no problems. Today, after working for at least an hour, the screen froze and is now not working, but the sounds are still functioning.

    I accidentally dropped my Ipod into the lake, at the beach yesterday, but i caught it early and it wasn't too soaked... i wiped it off for the most part, and most of the buttons and the screen worked fine! i was shocked, and there were a few glitches with the camera and the slide button on the lock screen, but otherwise it was greatly intact! so i gave it a rest, put it in my purse, and picked it up fifteen minutes later, and it was working 100% normally again! when i got home a few hours later, i put it in rice for a few hours, taking it out every once and a while to check my notifications... it still seemed to be working perfectly, so i just set it down out of the rice, assuming the moisture was gone. this morning, again, everything was working normally, no glitches, UNTIL, i opened my instagram app, and the screen froze, and it seemed like it had two separate screens, and i held the Sleep button down until the screen went black... then i tried turning it back on, etc. and it still didn't work, and so i plugged it into the computer, holding down the sleep and home buttons, and itunes identified it as in recovery mode, and started updating. i tried again to press the sleep and home butttons, maybe pressing only the home button, because I heard the Siri noise, as well as the charging sound, but the screen was still black.... i checked my iTunes, and lo and behold, it had identified my iPod, and synced it to the computer, as if it were normally functioning. However, the screen is still not working, and Siri is not working either. The sounds may be the only thing that's functioning. Should i send it in?

    - Restore from backup. See:                                 
    iOS: How to back up                             
    - Restore to factory settings/new iOS device.
    If still problem, make an appointment at the Genius Bar of an Apple store since it appears you have a hardware problem.
      Apple Retail Store - Genius Bar              
    Apple will exchange your iPod for a refurbished one for $199 for 64 GB 4G, $99 for the other 4Gs, $99 for the 16 GB 5G and $149 for the other 5Gs. They do not fix yours.
      Apple - iPod Repair price
    Sometime it takes a little while for the water to damage the iPod.

  • I have a problem with itunes when I sync the saved music and want to sync my iphone 5 ios 7.0.6 no longer passes the music thing is that just stays on "waiting for sync" and not worry please help are more than 400 songs that do not want to hear who are wi

    I have a problem with itunes when I sync the saved music and want to sync my iphone 5 ios 7.0.6 no longer passes the music thing is that just stays on "waiting for sync" and not worry please help are more than 400 songs that do not want to hear who are wi

    Plawexki wrote:
    ...  do you know if the contacts, photos, messages etc will be wiped?
    Yes... Everything will be Wiped and Replaced with what is currently on Your Mac.
    SYNCING with iTunes
    See here  >  http://support.apple.com/kb/HT1386
    From Here  >  http://www.apple.com/support/iphone/syncing/
    You may find this information of interest...
    Have a read here...
    https://discussions.apple.com/message/18409815?ac_cid=ha
    And See Here...
    How to Use Multiple iDevices with One Computer

  • Hi, I have a problem with my ipad, I want to restore it but I can not. When I plug the ipad (off) it is not recognized by itunes, I turn the ipad, There are apple and the apple after you see the usb cable and itunes logo for just 1 minute and turns off an

    Hi, I have a problem with my ipad, I want to restore it but I can not. When I plug the ipad (off) it is not recognized by itunes, I turn the ipad, There are apple and the apple after you see the usb cable and itunes logo for just 1 minute and turns off and is no longer recognized by itunes.
    thank you for your help.

    Hi there beni_m,
    You may find the troubleshooting steps in the articles below helpful.
    iOS: Not responding or does not turn on
    http://support.apple.com/kb/ts3281
    iOS: Device not recognized in iTunes for Mac OS X
    http://support.apple.com/kb/ts1591
    iOS: Device not recognized in iTunes for Windows
    http://support.apple.com/kb/ts1538
    -Griff W. 

  • When I connect my nano to my computer I receive the following message: There is a problem with this drive. Scan the drive now and fix it. My computer recognizes the ipod but the play lists saved in my itunes library are not the playlists that are on my na

    When I connect my nano to my computer I receive the following message: There is a problem with this drive. Scan the drive now and fix it.
    In addition, when I connect my nano, my computer does recognize but the library and playlists in my Itunes is not the same as the library/playlists on my ipod (on this ipod). If I purchase new songs from itunes, they go to the library on the computer but I cant get them to the ipod playlist.

    bump, I have same issue. thanks, MM

  • I''m new to Mac, how do I install Adobe CD? I put it in the CD drive and get a menu, everything I click on goes nowhere. In Microsoft, I installed many programs with no problem

    I''m new to Mac, how do I install Adobe CD? I put it in the CD drive and get a menu, everything I click on goes nowhere. In Microsoft, I installed many programs with no problem

    Is the Adobe CD a MAC app ?
    If it is a program for Windows you will not be able to install it.
    If you nedd that program you can either buy the equivalent for Mac or install a way to run Windows under Mac (may be a cheaper solution)

  • When I try to read a PDF file, the window opens and then disappears after a second or two. This began after the last Adobe update. I tried accepting the Adobe terms using Eula.exe but that disn't solve the problem. What do I do?

    I can no longer read PDF files. The window opens and then disappears after a second or two. This began after the last Adobe update. I tried accepting the Adobe terms using Eula.exe but that disn't solve the problem. What do I do?

    Can you open Adobe Reader by itself?  If so, try disabling Protected Mode [Edit | Preferences | Security (Enhanced)].

  • Sync Problem - "There is a problem with this drive. Scan the drive now and fix it".

    Have new desktop computer with Windows 8.When I connect my iPod to my computer to sync, I get the message – “There is a problem with this drive. Scan the drive now and fix it”. It is identifying the drive on the iPod as the problem. iPod works fine on my laptop computer and older desktop (both with Windows Vista). iTunes seems to momentarily recognize my iPod then it doesn't.  Any thoughts about a fix?

    bump, I have same issue. thanks, MM

  • I m having problems with my iPad 2 gestures.  The  screen enlarges and  will not respond to my attempts to restore it.

    I m having problems with my iPad 2 gestures.  The  screen enlarges and  will not respond to my attempts to restore it.   Is anyone else having this problem?  What is causing it and what  helps to restore normalcy?

    Try double-tapping the screen with 3 fingers and see if that zooms it back out - and if it does set Settings > General > Accessibility > Zoom 'off'. If it doesn't zoom you back then try triple-clicking the home button and see if that turns it off, and if it does you can then change what a triple-click does via Settings > General > Accessibility > Triple-Click Home.

Maybe you are looking for

  • Itunes 10.5 - windows 7 64bit error

    Hello, I'm having a problem with Itunes 10.5. When I try to connect my iphone 3GS with itunes on my pc it says I installed the wrong version. I need the 64bit version and not the 32bit version. But I just installed the 64bit version! I reïnstalled it

  • How to append in an encoder created file

    I'm using XMLEncoders and XMLDecoders for storage of java objects. Currently I've tried on simple data types only. But the problem is if I want to operate on the XMLEncoder created file from two different programs, then it is giving errors. In one pr

  • JVM crashing due to JNI call

    Hi All My application uses JNI to interact with other classes developed in C++. When I run the application ,which is comiled in java1.4, against java 1.5 ,it is crashing for any operation related to JNI. When I run the application with -Xint JVM opti

  • SES Standard report

    Hi All Is there any standard report for Service Entry Sheet Input   :   Account Assignment Category                  Cost Center (K)               Acceptance indicator                                   a) Not Accepted                                 

  • XI scenario configuration?

    We have a fairly complex XI configuration scenario that I would like to make a renamed copy of. For example, we have a configuration scenario called "TENANT001_SCENARIO" It contains a Business Service called "TENANT001" with 30+ communication channel