Display problem in reports

Hi,
i am running TEST and development instance on same hardware(one server)
OS is hp ux 11.11
EBS on TEST is 11.5.10.2
Database on test is 10.2.0.3
EBS on Development is 11.5.10
database on development is 9.2.0.5
i having trouble in viewing out put of reports on devlpment instance, it errrors out by giving this error
REP-3000: INTERNAL ERROR STARTING ORACLE TOOLKIT
but the same report runs on test without any problem
i have checked DISPLAY PARAMeter on both instances
for test it is
$ echo $DISPLAY
192.168.0.93:0.0
for devlop.
its
$ echo $DISPLAY
192.168.0.93:0.0
can any one tell me the problem as i am unbale to figure out

Re: xhost + unable to Open Display......
Check the last posting.Follow the same and update if you still have issues.
For Detailed study on it.
How to configure, manage and secure user access to the Linux X server : Doc ID: Note:459029.1
Edited by: bobcatalog aka 637332 on Oct 3, 2008 9:02 AM

Similar Messages

Currency display problem in Report using WBS Element

Hi Experts,
PCS report displying different values aginest same WBS elements, in different currency.
Report painter tool has been used.
Requirement is to display entered currency in the report.
i.e the currency which is entered in selection screen.
Regards,
Oamkar

Hi Experts,
PCS report displying different values aginest same WBS elements, in different currency.
Report painter tool has been used.
Requirement is to display entered currency in the report.
i.e the currency which is entered in selection screen.
Regards,
Oamkar

Display problem - report /w break formatting

Hi everyone,
I'm having a display problem in a standard report with break formatting on first column and repeat headings on break. Whenever I start a new page and a new group of data starts, the heading for the break is displayed 2 times. If the new page doesn't start with a new group, there's no problem.
I've made an exemple there : http://apex.oracle.com/pls/apex/f?p=25160:9
You can see the group #1 on the first page, no problem there.
On the second page, the group #2 begins and the header is repeated.
On the last page, the header for group #3 is not repeated because it was started on the previous page.
Why is the header for group #2 repeated ? How can I correct this ?
Thanks,
Patrick

Hi all,
I think it is a BUG, that was not fixed in 4.2.
Is it possible to workaround it????
Probably dynamic action with something like this javascript $("#my_table_id").find("tbody tr:(:eq(0))").remove(); With "On-Change" Event on the Region?
But this javascript should be execute only on the pages greather than 1. How can I check in javascript which page of report is actually shown???
Ideas, please!

Problem with Report Result Display.

Hi Experts,
In one of my reports , i need one key figure length of service in years which is report execution date (system date ) - entry date / 365.
Entry date is characteristic and it is in the report display.
I have made a formula and in that i created a formaula variable using replacement path for entry date and got entry date value.
Similarly for system date i got it into another formula using customer exit.
I have made antoher formula length of service in years calculation .Calcualtion every thing is fine.
My output required is show the result value only and hide the single values for the length of service. ....
Here My problem is in the result row for this formula lenght of service it is showing as X instead of the value.
SIngle values are fine .Result row values are coming as X.
I read that if it is formual varaivble using replacement path result values wont be proper.
I treid using calcualte result as ...but i have hierarchy display in my report as a result i am getting warning as
Calculating result as was not executed...
I tried using exception aggregattion even then result is coming as X.
So how i should i get my values displayed in the result row...
Thanks
vamsi
Edited by: vamsi talluri on Oct 13, 2009 4:55 PM

Hi Experts,
Any inputs on this...
Thanks
vamsi

Reporting display problems to Apple

If you are having display problems, you should not be waiting for others to complain or just sit there stewing in your juices. Call AppleCare and tell them what's going on. People in IT have told me that one of the most frustrating things that they encounter are customers who do not complain about real problems. If they don't complain, no one knows that there's a problem, and the customer just gets depressed or hostile for mysterious reasons. You may discover that someone has been doing some kind of awkward work-around for a software problem or bug, and when you ask then how long that has been going on, they may say 5 years!
I just called AppleCare earlier today and carefully explained the symptoms of my screen and why it bothered me. I tried to explain that the gradient problem is triggering alarm bells in my brain that there must be some kind of vision problem. The guy on the other end was very patient, asked questions, and really seemed to listen. He admitted to me that they need to know this stuff. I finally had to get off the phone because of a lightning storm, but I got a case number to continue the conversation later this weekend.

Let us know what happens! I've also been on the phone with Apple -- three times in the past week -- and I've gotten two different people to actually admit, in a sort of weak way, that they're actually aware of the problem. They want my machine to go to "repair", since I'm past the 14 days, first suggesting that I bring it to the Apple Store far from my neighborhood, and then telling me that I can get a site visit after complaining that I hardly have time to get there (totally true) and I'm small and the thing is difficult for me to carry (totally true), although I have to wait for my extended AppleCare, which I purchased yesterday, to arrive in the mail. One of them told me that she thought she's heard of some of these problems actually being fixed. We'll see.
Two of them have suggested that I try an archive/reinstall, just to confirm that it's not a software problem, although both admitted that it was probably a hardware problem anyway. Has anyone tried that? Has anyone wondered what that original iMac update 1.0 actually did?
I've been trying to emphasize my theory about a DC offset on the LCD inverter output, and supposedly they are taking notes, but I wonder if any of that actually makes it up to the engineers. I'm hardly a crank. I have science, very advanced math, and IT backgrounds, and did a lot of tinkering with electronics as a kid. I really wish I could talk directly to the engineers.
And speaking from a long IT background, I can say that one of the most dangerous customer relations things you can do is deny that a real problem exists. That tactic always backfires with a vengeance.

Problem displaying HTML in reports...

Post Author: redwing19
CA Forum: General
I'm new to Crystal Reports and I can't get a report to print/display html.I
have a column in my database that holds the HTML, and I want the data
in this column to be in the detail of the report keeping the HTML
format.So far, I've got the IFieldObject for the column dragged
onto the report, and set the "TextFormat" option to "crHTMLText". I've
also right-clicked the object, went to the paragraph tab, and set the
"Text Interpretation" option to "HTML Text".But when I preview
the report, it looks like it is actually stripping out the HTML. It
does apply simple HTML formatting for things like bolding, italicizing,
and underlining. But HTML tables and bulleted lists lose all their
formatting.What's going on? Can I not do this?The HTML from the database that I'm attempting to display is simple and looks like this:Here's some text formatting:This
should be bold, This should be underlined,
This should be italicized. Here's a table:<table border="1" cellpadding="2" cellspacing="0"> <tr> <td>column 1</td> <td>column 2</td> <td>column 3</td> </tr> <tr> <td>value 1</td> <td>value 2</td> <td>value 3</td> </tr> <tr> <td>value 1</td> <td>value 2</td> <td>value 3</td> </tr></table> Here's an ordered list:<ol> <li>Item in list</li> <li>Item in list</li> <li>Item in list</li> <li>Item in list</li></ol>When the above HTML is displayed in the report, only the bolding,
underlining, and italicizing are applied. It's like the rest of the
HTML tags are stripped out. The content inside the HTML table and
ordered list are still displayed, but it's all jumbled together with no
alignment, borders, indenting, bullet points, numbering etc. So the
output of the report using the above html looks like this:Here's some text formatting:This should be bold, This should be underlined, This should be
italicized.Here's a table:column 1column 2column 3value 1value 2value 3value 1value 2value 3Here's an ordered list:Item in listItem in listItem in listItem in list Anyone know if what I'm attempting is possible or why the HTML isn't displayed properly?

Post Author: IdoMillet
CA Forum: General
For a description of HTML rendering limitations in Crystal Reports, see:http://support.businessobjects.com/library/kbase/articles/c2014842.asp- Ido

Wierd lines on my display and frequent lock-ups w/ and w/o display problems

When booting I sometimes get weird lines and blocks on my display (the GRAY Apple screen) and then it hangs, other times the computer will boot and run fine for 20-30 minutes and then the display goes wonkers with blocks and lines and the computer does not respond. The only way I can get it to boot is to reset the PRAM by letting it CHIME 3x and then occasionally it will boot without issue and run, while other times I still get the blocks and lines on the display.
When I am able to get it to recover and re-boot after the lock-up and display problems and occasionally the box in the middle asking me to re-boot similar to a kernel panic the OPS gives me the option to REPORT the error and here is the error for others who would know more...
Thank you in advance,
Darren
Interval Since Last Panic Report: 104960 sec
Panics Since Last Report: 5
Anonymous UUID: 7D1AEF43-7E19-4F58-A1E0-48FA992A2814
Wed Nov 18 15:49:50 2009
panic(cpu 0 caller 0x9cdb10): NVRM[0/1:0:0]: Read Error 0x00009410: CFG 0xffffffff 0xffffffff 0xd2000000, BAR0 0xd2000000 0x5d3e2000 0x084700a2, D0, P1/4
Backtrace (CPU 0), Frame : Return Address (4 potential args on stack)
0x5c99b7d8 : 0x21b2bd (0x5cf868 0x5c99b80c 0x223719 0x0)
0x5c99b828 : 0x9cdb10 (0xbb7fec 0xc209c0 0xbc3660 0x0)
0x5c99b8c8 : 0x147690d (0x8b5ac04 0x7edf004 0x9410 0xabd962)
0x5c99b908 : 0x1534e6a (0x7edf004 0x9410 0x5c99b968 0x9)
0x5c99b948 : 0xb51ca5 (0x7edf004 0x91ed004 0x0 0x0)
0x5c99b968 : 0xac155b (0x91ed004 0x5c99baa4 0x0 0x0)
0x5c99b9b8 : 0x145f290 (0x7edf004 0x3d0900 0x5c99baa4 0x0)
0x5c99bad8 : 0xab2821 (0x7edf004 0x91cf004 0x815200c 0x200)
0x5c99bb18 : 0xb1f172 (0x7edf004 0x91cf004 0xeb9bcc0 0xeb9bc04)
0x5c99bbc8 : 0xb202db (0x7edf004 0x91f0404 0x0 0x0)
0x5c99bc58 : 0x14bb7a3 (0x7edf004 0x91f0404 0x9 0x2)
0x5c99bd68 : 0x14ed407 (0x7edf004 0x91cf404 0x0 0x0)
0x5c99be98 : 0xad3934 (0x7edf004 0x91ca404 0x0 0x0)
0x5c99bec8 : 0x9d61fb (0x7edf004 0x91ca404 0x0 0x0)
0x5c99bf08 : 0x5491b5 (0x0 0x9499680 0x1 0x29c50a)
0x5c99bf58 : 0x5481e6 (0x9499680 0x1 0x5c99bf88 0x547d9d)
0x5c99bf88 : 0x548640 (0x8abaf00 0x7e9ecc0 0xe780850c 0x2a6e5f)
0x5c99bfc8 : 0x29d68c (0x8abaf00 0x0 0x10 0x88bbfc4)
Kernel Extensions in backtrace (with dependencies):
com.apple.nvidia.nv50hal(6.0.6)@0x136b000->0x17f1fff
dependency: com.apple.NVDAResman(6.0.6)@0x96f000
com.apple.NVDAResman(6.0.6)@0x96f000->0xc21fff
dependency: com.apple.iokit.IOPCIFamily(2.6)@0x932000
dependency: com.apple.iokit.IONDRVSupport(2.0)@0x961000
dependency: com.apple.iokit.IOGraphicsFamily(2.0)@0x943000
BSD process name corresponding to current thread: kernel_task
Mac OS version:
10C540
Kernel version:
Darwin Kernel Version 10.2.0: Tue Nov 3 10:37:10 PST 2009; root:xnu-1486.2.11~1/RELEASE_I386
System model name: MacBookPro3,1 (Mac-F4238BC8)
System uptime in nanoseconds: 3788331456483
unloaded kexts:
com.apple.driver.AppleFileSystemDriver 2.0 (addr 0xf02000, size 0x12288) - last unloaded 94521475551
loaded kexts:
org.virtualbox.kext.VBoxNetAdp 2.2.2
org.virtualbox.kext.VBoxNetFlt 2.2.2
org.virtualbox.kext.VBoxUSB 2.2.2
org.virtualbox.kext.VBoxDrv 2.2.2
com.bresink.driver.BRESINKx86Monitoring 5.0
com.pctools.iantivirus.kfs 1.0.1
com.apple.driver.AppleHWSensor 1.9.2d0 - last loaded 31800108689
com.apple.filesystems.ntfs 3.1
com.apple.filesystems.autofs 2.1.0
com.apple.driver.AppleHDA 1.7.9a4
com.apple.driver.AirPort.Atheros 412.19.4
com.apple.kext.AppleSMCLMU 1.4.5d1
com.apple.driver.SMCMotionSensor 3.0.0d4
com.apple.DontSteal_Mac_OSX 7.0.0
com.apple.driver.AudioIPCDriver 1.1.2
com.apple.driver.AppleIntelMeromProfile 19
com.apple.driver.ACPISMCPlatformPlugin 4.0.1d0
com.apple.driver.AppleLPC 1.4.9
com.apple.driver.AppleBacklight 170.0.14
com.apple.driver.AppleUpstreamUserClient 3.1.0
com.apple.GeForce 6.0.6
com.apple.driver.AppleUSBTrackpad 1.8.0b4
com.apple.driver.AppleUSBTCKeyEventDriver 1.8.0b4
com.apple.driver.AppleUSBTCKeyboard 1.8.0b4
com.apple.iokit.SCSITaskUserClient 2.6.0
com.apple.BootCache 31
com.apple.AppleFSCompression.AppleFSCompressionTypeZlib 1.0.0d1
com.apple.iokit.IOAHCIBlockStorage 1.6.0
com.apple.iokit.AppleYukon2 3.1.14b1
com.apple.driver.AppleAHCIPort 2.0.1
com.apple.driver.AppleSmartBatteryManager 160.0.0
com.apple.driver.AppleIntelPIIXATA 2.5.0
com.apple.driver.AppleUSBHub 3.8.4
com.apple.driver.AppleFWOHCI 4.4.0
com.apple.driver.AppleUSBEHCI 3.7.5
com.apple.driver.AppleUSBUHCI 3.7.5
com.apple.driver.AppleEFINVRAM 1.3.0
com.apple.driver.AppleRTC 1.3
com.apple.driver.AppleHPET 1.4
com.apple.driver.AppleACPIButtons 1.3
com.apple.driver.AppleSMBIOS 1.4
com.apple.driver.AppleACPIEC 1.3
com.apple.driver.AppleAPIC 1.4
com.apple.security.sandbox 0
com.apple.security.quarantine 0
com.apple.nke.applicationfirewall 2.1.11
com.apple.driver.AppleIntelCPUPowerManagementClient 96.0.0
com.apple.driver.AppleIntelCPUPowerManagement 96.0.0
com.apple.driver.DspFuncLib 1.7.9a4
com.apple.driver.AppleProfileReadCounterAction 17
com.apple.driver.AppleProfileTimestampAction 10
com.apple.driver.AppleProfileThreadInfoAction 14
com.apple.driver.AppleProfileRegisterStateAction 10
com.apple.driver.AppleProfileKEventAction 10
com.apple.driver.AppleProfileCallstackAction 20
com.apple.iokit.IOFireWireIP 2.0.3
com.apple.iokit.IO80211Family 310.6
com.apple.iokit.IOSurface 73.0
com.apple.iokit.IOBluetoothSerialManager 2.2.4f3
com.apple.iokit.IOSerialFamily 10.0.3
com.apple.iokit.IOAudioFamily 1.7.2fc1
com.apple.kext.OSvKernDSPLib 1.3
com.apple.driver.AppleHDAController 1.7.9a4
com.apple.iokit.IOHDAFamily 1.7.9a4
com.apple.iokit.AppleProfileFamily 41
com.apple.driver.AppleSMC 3.0.1d2
com.apple.driver.IOPlatformPluginFamily 4.0.1d0
com.apple.nvidia.nv50hal 6.0.6
com.apple.NVDAResman 6.0.6
com.apple.iokit.IONDRVSupport 2.0
com.apple.iokit.IOGraphicsFamily 2.0
com.apple.driver.CSRUSBBluetoothHCIController 2.2.4f3
com.apple.driver.AppleUSBBluetoothHCIController 2.2.4f3
com.apple.iokit.IOBluetoothFamily 2.2.4f3
com.apple.iokit.IOUSBHIDDriver 3.8.4
com.apple.driver.AppleUSBMergeNub 3.8.5
com.apple.driver.AppleUSBComposite 3.7.5
com.apple.iokit.IOSCSIMultimediaCommandsDevice 2.6.0
com.apple.iokit.IOBDStorageFamily 1.6
com.apple.iokit.IODVDStorageFamily 1.6
com.apple.iokit.IOCDStorageFamily 1.6
com.apple.driver.XsanFilter 402.1
com.apple.iokit.IONetworkingFamily 1.9
com.apple.iokit.IOATAPIProtocolTransport 2.5.0
com.apple.iokit.IOSCSIArchitectureModelFamily 2.6.0
com.apple.iokit.IOAHCIFamily 2.0.2
com.apple.iokit.IOATAFamily 2.5.0
com.apple.iokit.IOUSBUserClient 3.8.5
com.apple.iokit.IOFireWireFamily 4.1.7
com.apple.iokit.IOUSBFamily 3.8.5
com.apple.driver.AppleEFIRuntime 1.3.0
com.apple.iokit.IOHIDFamily 1.6.1
com.apple.iokit.IOSMBusFamily 1.1
com.apple.kext.AppleMatch 1.0.0d1
com.apple.security.TMSafetyNet 6
com.apple.driver.DiskImages 281
com.apple.iokit.IOStorageFamily 1.6
com.apple.driver.AppleACPIPlatform 1.3
com.apple.iokit.IOPCIFamily 2.6
com.apple.iokit.IOACPIFamily 1.3.0
Model: MacBookPro3,1, BootROM MBP31.0070.B07, 2 processors, Intel Core 2 Duo, 2.2 GHz, 4 GB, SMC 1.16f11
Graphics: NVIDIA GeForce 8600M GT, GeForce 8600M GT, PCIe, 128 MB
Memory Module: global_name
AirPort: spairportwireless_card_type_airportextreme (0x168C, 0x87), Atheros 5416: 2.0.19.4
Bluetooth: Version 2.2.4f3, 2 service, 0 devices, 1 incoming serial ports
Network Service: AirPort, AirPort, en1
PCI Card: pci168c,24, sppci_othernetwork, PCI Slot 5
Serial ATA Device: ST9320421ASG, 298.09 GB
Parallel ATA Device: MATSHITADVD-R UJ-857E
USB Device: Built-in iSight, 0x05ac (Apple Inc.), 0x8502, 0xfd400000
USB Device: Apple Internal Keyboard / Trackpad, 0x05ac (Apple Inc.), 0x021a, 0x5d200000
USB Device: Bluetooth USB Host Controller, 0x05ac (Apple Inc.), 0x8205, 0x1a100000
Anyone know what is causing my problems? I thought it was heat so I downloaded a CPU and FAN temperature monitor and the CPU was getting VERY HOT at first so I then ramped-up the CPU FAN SPEED to maximum - it turns out the CPU FAN was not rotating well at low speed - since then I have cleaned and checked the fans and they all work as they should and blow on high(er) when the CPU temperature is above a certain level.

S.U.
Is there a kb article or something that would illuminate what to look for in these logs, or is it a matter of learning by osmosis?
Both. I am not skilled in reading logs. It is a very technical and time consuming task for the uninitiated (me!) In scanning a log I look for the backtrace and loading dependencies. The first item in the backtrace is usually the roadblock.
Beyond that you can look at the Technical Note TN2063: Understanding and Debugging Kernel Panics
Should make for good bedtime reading. Puts you right to sleep.
c

Discoverer viewer displaying all the reports instead of one report

Hi Team,
I have created one menu and attached 4 reports to that.after that that menu is attached to the main menu.This menu is attached to the one xyz responsibility.
Now i am facing the problem is : After logging to the responsibility,i clicked on individual report ,but it is not displaying only one report.It is showing all the reports in the discoverer viewer.
Can you please help me in this issue..

Please post the details of the application release, database version and OS.
I have created one menu and attached 4 reports to that.after that that menu is attached to the main menu.This menu is attached to the one xyz responsibility.
Now i am facing the problem is : After logging to the responsibility,i clicked on individual report ,but it is not displaying only one report.It is showing all the reports in the discoverer viewer.Please review these docs and verify that you have completed all the steps.
How to Create a Link to a Discoverer Workbook in Apps R12 [ID 471303.1]
How to Create a Link to a Discoverer Workbook in Apps11i [ID 278095.1]
Thanks,
Hussein

Error when trying to display a Webi report through the Folder iView

Hi all
I am getting the following error when Im trying to display a Webi report through the SAP Portal. We have installed the SAP Integration Kit and are able to see the content of the Infoview. However when we click on a Webi report, we receive the following error:
Could not get page number. (Error: RWI 00223) (Error: INF)
Have anyone else encountered this problem? Please assist! Any help will be rewarded.
(We are running XI Rel 2).
Addition from trace file (tomcat):
com.businessobjects.rebean.wi.CommunicationException: Could not get page number. (Error: RWI 00223)
     at com.businessobjects.rebean.wi.occa.OccaReportComAdapter.setBlobKey(OccaReportComAdapter.java:542)
     at com.businessobjects.rebean.wi.occa.OccaReportComAdapter.getView(OccaReportComAdapter.java:376)
     at com.businessobjects.rebean.wi.occa.OccaReportComAdapter.getView(OccaReportComAdapter.java:297)
     at com.businessobjects.rebean.wi.ReportImpl.getView(ReportImpl.java:384)
     at com.businessobjects.rebean.wi.ReportImpl.getView(ReportImpl.java:407)
     at org.apache.jsp.viewers.cdz_005fadv.viewReport_jsp._jspService(viewReport_jsp.java:1182)
     at org.apache.jasper.runtime.HttpJspBase.service(HttpJspBase.java:94)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:802)
     at org.apache.jasper.servlet.JspServletWrapper.service(JspServletWrapper.java:324)
     at org.apache.jasper.servlet.JspServlet.serviceJspFile(JspServlet.java:292)
     at org.apache.jasper.servlet.JspServlet.service(JspServlet.java:236)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:802)
     at org.apache.catalina.core.ApplicationFilterChain.internalDoFilter(ApplicationFilterChain.java:237)
     at org.apache.catalina.core.ApplicationFilterChain.doFilter(ApplicationFilterChain.java:157)
     at org.apache.catalina.core.ApplicationDispatcher.invoke(ApplicationDispatcher.java:704)
     at org.apache.catalina.core.ApplicationDispatcher.processRequest(ApplicationDispatcher.java:474)
     at org.apache.catalina.core.ApplicationDispatcher.doForward(ApplicationDispatcher.java:409)
     at org.apache.catalina.core.ApplicationDispatcher.forward(ApplicationDispatcher.java:312)
     at org.apache.jasper.runtime.PageContextImpl.doForward(PageContextImpl.java:670)
     at org.apache.jasper.runtime.PageContextImpl.forward(PageContextImpl.java:637)
     at org.apache.jsp.viewers.cdz_005fadv.report_jsp._jspService(report_jsp.java:325)
     at org.apache.jasper.runtime.HttpJspBase.service(HttpJspBase.java:94)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:802)
     at org.apache.jasper.servlet.JspServletWrapper.service(JspServletWrapper.java:324)
     at org.apache.jasper.servlet.JspServlet.serviceJspFile(JspServlet.java:292)
     at org.apache.jasper.servlet.JspServlet.service(JspServlet.java:236)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:802)
     at org.apache.catalina.core.ApplicationFilterChain.internalDoFilter(ApplicationFilterChain.java:237)
     at org.apache.catalina.core.ApplicationFilterChain.doFilter(ApplicationFilterChain.java:157)
     at org.apache.catalina.core.StandardWrapperValve.invoke(StandardWrapperValve.java:214)
     at org.apache.catalina.core.StandardValveContext.invokeNext(StandardValveContext.java:104)
     at org.apache.catalina.core.StandardPipeline.invoke(StandardPipeline.java:520)
     at org.apache.catalina.core.StandardContextValve.invokeInternal(StandardContextValve.java:198)
     at org.apache.catalina.core.StandardContextValve.invoke(StandardContextValve.java:152)
     at org.apache.catalina.core.StandardValveContext.invokeNext(StandardValveContext.java:104)
     at org.apache.catalina.core.StandardPipeline.invoke(StandardPipeline.java:520)
     at org.apache.catalina.core.StandardHostValve.invoke(StandardHostValve.java:137)
     at org.apache.catalina.core.StandardValveContext.invokeNext(StandardValveContext.java:104)
     at org.apache.catalina.valves.ErrorReportValve.invoke(ErrorReportValve.java:117)
     at org.apache.catalina.core.StandardValveContext.invokeNext(StandardValveContext.java:102)
     at org.apache.catalina.core.StandardPipeline.invoke(StandardPipeline.java:520)
     at org.apache.catalina.core.StandardEngineValve.invoke(StandardEngineValve.java:109)
     at org.apache.catalina.core.StandardValveContext.invokeNext(StandardValveContext.java:104)
     at org.apache.catalina.core.StandardPipeline.invoke(StandardPipeline.java:520)
     at org.apache.catalina.core.ContainerBase.invoke(ContainerBase.java:929)
     at org.apache.coyote.tomcat5.CoyoteAdapter.service(CoyoteAdapter.java:160)
     at org.apache.coyote.http11.Http11Processor.process(Http11Processor.java:799)
     at org.apache.coyote.http11.Http11Protocol$Http11ConnectionHandler.processConnection(Http11Protocol.java:705)
     at org.apache.tomcat.util.net.TcpWorkerThread.runIt(PoolTcpEndpoint.java:577)
     at org.apache.tomcat.util.threads.ThreadPool$ControlRunnable.run(ThreadPool.java:683)
     at java.lang.Thread.run(Thread.java:534)
Furthermore I'd like to see an example of the cms_name entry. The documentation states: In addition, specify the Application Parameter for each iView. For this property, enter cms_name=[cms] for the fully qualified server name., but I have doubts as to what format to use.
Kind regards,
Martin Søgaard

Hi Jim Ji
The report can be displayed from the java infoview, no doubt, so the report itself works.
But the report cannot be seen from the "SAP Infoview" (:/businessobjects/enterprise115/sap) which is the infoview, I reference from the Folder iView (through the system in the SAP portal). And since the SAP Portal Integration Kit seems very old - the Folder iView was created 12-08-2004 by Ingo Hilgefort - there might be an old version of the jar-files somewhere in the installation.
I guess I should check the version of the jar-files in WEB-INF/lib of our web application (Tomcat) folder, and see if they have been overwritten by the SAP Portal Integration Installation or are an older version of the files in Program FilesBusiness Objectscommon3.5javalib? And also check if somewhere in the .../sap installation there are some old jar-files?
Kind regards,
Martin Søgaard

Display Image on report through Field Definitions Only File.

Hi all,
I have a report where I work with Field Definitions Only files (ttx).
These files are mapped to classes in code behind (csharp).
In code behind I make lists of these classes. Each list is set as the datasource of a subreport.
This works great!
My new goal:
Now I tried adding a picture to my report.
In the TTX file I added a BLOB field.
In the code-behind class I added a System.Drawing.Image.
My actual problem:
The class gets filled with the image, but the image is NOT displayed on the report
Does anyone know why this is happening?
How can I fix this? (should I use another Type in my class for the picture?) (should I format the picture in the report? ....)
Kind regards,
Wim

Hi AG,
Thanks for your response.
This is my TTX field:
Signature BLOB
I can't see the image in the report because I create the image in code-behind.
I think the problem doesn't occur in CrystalReports but in the conversion from my StrokeCollection (I use an InkCanvas [WPF] to capture a signature) to a ByteArray.
I am already one step closer to the solution. You can't just assign an object of type Image to the BLOB field of the report but it has to be a Byte-Array.
The problem I am facing now is that the picture is black after a conversion. (I see this when I export to disk and open the file in MSPaint).
The good thing is that CR shows me a black image so I guess CR is doing its job!
Kind regards,
Wim

Page cannot be displayed while running report in OAS (10.1.2.3)form/report

Hi All,
I have a report which take 4 hrs time to execute the report
If i run this 4 hrs report,the report runs sucessfully when we see in particular
report server in application server.
But, we wont get any pop up to open report after executing sucessfully
at user end, A error message is displayed in only report param page like,
"The page cannot be displayed"
I Think only param page is expired but not form session.
We have also set the parameters like in report/conf/repsername.conf
engineResponseTimeout=30 and <connection maxConnect="200" idleTimeOut="300">
Also,In httpd.conf timeout is 3600 and MaxBlockTimeout in web.xml file
we have set "maxBlockTime" for long running report (4h)
<init-param>
<param-name>maxBlockTime</param-name>
<param-value>12600000</param-value>
</init-param>
Please help me out to solve this issue.
Regards
Kirana

I am facing a similar problem. Did you find a solution to this problem?
Thanks
Karnail

Amounts not displayed correctly in reporting

Hello,
We are facing a problem with data displayed in a created workbook. Amounts are multiplied by 100000.
We have loaded via file into BPC NW, and the information that is stored in the cube is 1.00000 (with 5 decimals), but what is displayed in the report 10,000.00 u2013 so it is reading the information as it is in the cube and putting two decimal places, which is not correct.
We have been checking in the Application Set and the Application parameters, but could not any related parameter to set this property.
I have been looking note 1231909, but does not apply to our case; our flat file does not contain thousands separators.
Could someone help with this issue?
Thanks&Kind regards,
Begonia

HI,
Not sure if I got your query correctly. But in general when you load an amount lets say 1500 from a flat file, the format in which this 1500 gets store in the cube is 1.500 (in the cube the decimal digits appear after a 'comma' ) ... And in your report in BPC this same value appears as 1,500 ... I think the decimal places can be removed from the workbook by formating the cell to not show the decimal values.
Hope this helps.
Thanks,
Prasanth.

Placing buttons in a region displaying an Interactive Report

Hi,
I have a page on which I am displaying an interactive report.I would like to place buttons on this region where the report is displayed-
- The first button right of the search bar of the interactive report
- The second button right of the first button.
- The third (exactly ) below the second button (still right of the search bar)
I am aware that if this where an HTML region,then I would have had the flexibility to place the third button in a new line without a problem,but can I achieve this in a region displaying an interactive report?
Is there any way to do this?
Regards,
Priya Jetley

Create the buttons as region buttons in the IR region, with the following properties:
Button Position: Right of Interactive Report Search Bar
Button Alignment: Left Right
Enter *style="display: block; float: right;"* in the Button Attributes of the third button.
Edited by: fac586 on Nov 11, 2008 8:04 AM
Changed to fix slight layout glitch in Firefox 2.
Edited by: fac586 on Nov 11, 2008 9:06 AM
Changed back as the slight glitch in FF2 is preferable to not working in FF3 and Safari

Image not displaying in pdf report using XSL-FO and using Oracle 11g databa

Good Afternoon,
I have created over 15 reports using XSL-fo, with the following syntax to display an image on the pdf:
fo:block margin-left="0.24cm" margin-right="0.27cm" margin-top="0.0cm" ><fo:external-graphic content-width="scale-to-fit" content-height="scale-to-fit" width="1.73cm" height="1.57cm" >
<xsl:attribute name="src">'url("http://readiness:7780/i/marforcom_symbol_rpts.gif")'</xsl:attribute></fo:external-graphic>
</fo:block>
This syntax works fine when using Oracle 10g, now my database has been upgraded to 11g and my image no longer displays in the reports. I have already upload the image into the database as a workspace image.
I have tried to point the image @ the image by using url(#WORKSPACE_IMAGE#marforcom_symbol_rpts.gif)
or <img src ="#IMAGE_PREFIX#marforcom_symbol_rpts.gif")
and it still doesn't work.
I have searched this forum trying to come up with a solution that will fix my problem and am unable to.
Current config: Oracle 11g, using pl/sql gateway.
I need to know how to point the xsl-fo file to the database, where the image now resides.
Thanks,
Mary
Edited by: MaryM on Jul 25, 2012 3:15 PM
Edited by: MaryM on Jul 25, 2012 3:51 PM

Hi,
I think you need load images to database XDB virtual directory /i/ and then use #IMAGE_PREFIX# substitution.
This might help to access /i/
http://www.apex-blog.com/oracle-apex/accessing-i-using-ftp-170.html
Or use this to load images
http://oracleinsights.blogspot.fi/2012/05/loading-images-into-oracle-xdb.html
Regards,
Jari
My Blog: http://dbswh.webhop.net/dbswh/f?p=BLOG:HOME:0
Twitter: http://www.twitter.com/jariolai

Display Problem - Light Coming From Top

Hello,
So I recently purchased a 27" iMac, and have noticed a display problem when viewing in full screen mode. Its only an issue if there is black along the top of the screen (such as the black bars when watching a movie or trailer). When there is black along the top, you can see some white light kind of bleeding in from the top edge - kind of all the way along (very narrow), but more pronounced at certain spots. I browsed the forums, but couldn't find anything that seemed real similar (though there are a number of reports of a yellow tinge on the bottom).
I guess I"m just wondering if this is a common LED problem - or if my display may be defective, and I should take it back.
Thanks in advance.

Hi Pullo
There has been a few reports, but nothing wide spread.
http://discussions.apple.com/thread.jspa?messageID=3005885&#3005885
http://discussions.apple.com/thread.jspa?messageID=7722386&#7722386
If it's noticeable, then most definitely take it back.
Dennis

Display problem in reports

Similar Messages

Maybe you are looking for