Display problem in the portal: Interesting!

Hi,
I am facing an interesting problem in my portal.
In the content area, when an iview is getting displayed, sometimes I dont find the blue background and proper arrangements of the tabs present in the iview.It becomes plane white and the texts and tabs that are to appear in the content area are seen in a random fashion.
This problem it doesnt occur always. Sometimes it works fine and sometimes it gives this problem. Please get me a solution.
Regards,
Pawan.

Hi,
  There may be some problem in installation itself. Not sure. May be u can try updating the latest patch and see if the probelm gets resolved.
Regards,
Harini S

Similar Messages

  • Hierarchy variable inpu help not displayed correctly in the portal

    Hi ,
    I have a problem when trying to select Hierarchy in the variable selection screen hierarchy  is not being displayed
    correctly in the portal/browser  . When running the same report in BEX Analyser  and in RSRT with HTML option the
    hierarchy displays correctly in the variable selection screen .
    In Portal Var selection screen Hierarchy is displayed side by side ie horizontally not level by level.
    Please help.

    Thanks Venkat, Problem is solved with the note u mentined

  • Translation problem in the portal screen

    Hi Experts,
    We are facing problem in the portal screen where some texts are displaying in-correct languages.
    Basically all the text should come in Chinese if we login in Chinese language, but it is coming in English
    For e.g. In Follow on Documents screen u2013 Value (filed label) is coming in English instead of Chinese,
    Similarly some Chinese text is wrongly translated.
    Help us how to do the translation or should we need to apply any OSS notes for this?
    Should we need to use translation SOTR_EDIT to do the translation?if then how to do it?
    Regards
    Paul

    Hi,
    What is the SRM version ? Please also check the language setting in your browser.
    For wrong translation, you can correct it in the translation tools like SE63.
    Regards,
    Masa

  • How to solve the image display problem in the iTunes Store

    Hi guys!
    I just want to give a work-around for all of you having the image display problem in the iTunes Store. In my case only the square images in the slider sections won't load:
    I had this in my last W7-installation and got it again in W8 after the first few weeks.
    There are a lot of reports about this problem out there and adhoc solutions like 'clear the cache' or 'reinstall and drink ice tea' that do not work. It is obviously a file request error. It is all about finding out which server addresses get blocked by your computer.
    Solution: Go to your firewall and your Anti-virus-program. There must be a whitelist option. In Kaspersky, check the web-options, the banner-options and the firewall-options, because the all have whitelists. The following addresses have to be whitelisted:
    *.apple
    *.mzstatic.apple.com.akadns.net
    *.mzstatic.com.edgesuite.net
    *.da1.akamai.net
    *.itunes.apple.com
    se.itunes.apple.com
    upp.itunes.apple.com
    ax.init.itunes.apple.com
    xp.apple.com
    *.mzstatic.com
    client-api.itunes.apple.com
    www.apple.com.edgekey.net
    www.isg-apple.com.akadns.net
    Press Ctrl + R in the iTunes Shop then and browse throught the music sections. All images should be displayed correctly now.
    If not, there might be more Apple servers involved in your case. You can find them by running a DNS sniffing tool like the DNS query sniffer by Nirsoft or Wireshark.

    Phone restarting randomly could be loose battery. Tighten by putting a small strip of electrical tape on the back edge.
    THE BITTERNESS OF POOR QUALITY, LINGERS LONG AFTER THE CHEAPNESS OF PRICE, IS SOON FORGOTTEN.

  • Leave not displaying correctly on the Portal.

    Hi,
    The leave displayed in IT 2006 and PT50 are more than what is displayed on the Portal.

    Hi
    pls check if your portal is pointing to the correct backed system, also check if you refresh the ivew does it change.
    Regards
    sameer

  • Can MDAC installation cause navigation problems within the portal?

    Hello,
    I have a client who having problems loading page links in our second level navigation.  Evertime time she clicks on node to expand the tree of links, she gets a "loading" message.  I see this all the time but this message doesn't go away. She also gets a javascript error on the page stating it cannot find the specify module.  She notice the problem around the time of her MDAC file installation.  Do anyone know if this can cause a problem for navigation on the portal?
    Thank you,
    Francis

    You made this bed by over complicating your site. Simple solution, take your pages out of sub-folders.  Nobody but you cares about the .html extensions. IMO, it's a very poor reason for using sub-folders.
    About linking & navigation:
    http://help.adobe.com/en_US/dreamweaver/cs/using/WScbb6b82af5544594822510a94ae8d65-7c44a.h tml
    Presently, you must be using document relative link paths.  Either switch to Site Root Relative links which will likely work on your remote server but fail to test locally.  Or use absolute URLs (http://).  The downside with this is that DW won't be able to manage links for you.
    Nancy O.

  • General Key Figure Monitor doesn't display data in the portal

    Hi...
    I have configured the general key figure monitor in SPRO.  I executed the program KFM_VALUE_DET_SCHEDULE.  When I execute the portal iview using the context id, the  key figure data does't display.  The context id is set to the key figure category. 
    Any ideas?

    Hi
    Thanks, that was just what I was looking for.
    I have verified that it is the right task, but unfortunately I still have an issue.
    If I add tasks like “uwl.task.webflow.default.TS92000077” or “uwl.task.webflow.TS92000077” in a view under Support Itemtypes, then these tasks are still not shown in my list.
    If I add another task that exist in the default configuration file (under system registration) then it works fine.
    Please look at the two screendumps under “item Type”. In the screendump that works the complete name is shown under Item Type and in the other case only a prefix call “default” is displayed.
    http://webdata.dk/uwl/works.jpg
    http://webdata.dk/uwl/fails.jpg
    Am I missing some configuration in the backed or does anyone have any idea where this information is received from?
    Thanks in advance
    Cheers
    John Stubbe

  • Display Problem with the Key Figures

    Hi,
    I working on the query where i need to display three Key Figures. I have no problem with the first two Key Figures , but the third Key figure values need to be display by day wise. (0Calday). i.e., the third key figure value should be displayed  based no of days 0Calday has.
    For Example if 0Calday is holding 4 days... then third keyfigure  Value should be display as 4 columns with their respective values by dividing into day wise, remaining first two key figures should not be changed.
    When i am trying to call the 0Calday into the Column, all the three Key Figures values are displaying as many as no of days 0calday has.
    For Example if 0Calday has 2 day....the three Key Figures are values are breaking into two days values and displaying, so totally we can see 6 Key figure values.  But i need first two values should not break but the last key figure should be divide into two days as values and display.
    Thanks & Regards
    Agama.

    Hi Venkat
    This can be achieved by supressing 0 values.
    1) In the Query Designer: Go toquery properties
    2) Select Suppress Zeros
    3) Select option Active
    4) Under Effect On : try with Column or row o (Not infront of system , so cannot exactly remember)
    This will allow you to get the  exact result as per your requirement. We had the same issue and we could resolve this by following this.
    Hope it helps.
    Cheers

  • Problem into the portal content Studio

    Dear Expert.
    Thanks for helping me.
    When i enter to the Portal Content Studio  as administrator
    All the options are enabled sucha as: Create JCO Destination,  Maint JCO Destinations, Start assigned SLD buttons.
    Thanks everyone.
    Edited by: jtovar77 on Oct 14, 2011 7:07 PM

    Hi jtovar77,
    this forum is about SAP NetWeaver Gateway problems (which is an ABAP based solution).
    I assume that one of the forums listed on the follwoing page [SAP NetWeaverPortal in SDN|http://www.sdn.sap.com/irj/sdn/nw-portalandcollaboration] is better suited for your problem.
    Best Regards,
    Andre

  • Bandwith problems within the Portal

    Hi SAP Experts,
    I have the following problem:
    We have Portal users which go online with the modem and we have users which access the internet through a dial-up connection. I would like to have the "modem users" to work on a standard framework page and the "dial-up users" to work on a light framework page.
    I would like to integrate this within the Master Rule Collection. It should sound like the following:
    If the user has a high bandwith => go with the standard framwork page
    If the user has a low bandwith => go with the light framework page.
    Do you guys know if this is possible? If yes, how does the Portal know if the user has high- or low bandwith?
    Thanks in advance and best regards
    I will give u good points because I have really troubles solving that problem.
    Alex

    Hi,
    Please check these links:
    https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.highlightedcontent?documenturi=%2fhelp%2fsdn_help_nw04s%2fsaphelp_nw04s%2fhelpdata%2fen%2fed%2ff794f201654cc8bdd6968e350800d9%2fcontent.htm
    MastHead Change & Portal Desktop
    Master Rule Collection
    https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/8d9d9c90-0201-0010-e9a4-ed82031e1908
    Hope it helps.
    Regards,
    Mona

  • Problem with the portal on 64bit computer(s)

    None of the replies fixed the issue but after doing more troubleshooting I am starting to narrow the issue down.  I am going to start a new post with my new findings.
    Hello
    Wondering if this is a known issue or not.  I am having troubles with windows 7 x64 machines getting a blank page when getting to the portal.
    I can get to it just fine on my 32bit machine but when I login on a 64bit machine the silver light part does not load. I have tried adding the site to both trusted and/or local intranet zones with no change.
    If this a known issue is there a work around?

    You would need Silverlight for the 64bit browser, which I am not sure even exists. You probably have Silverlight for 32bit browser installed and working fine.
    Cheers,
    Anders Spælling
    Senior Consultant
    Blog:  
    Twitter:   LinkedIn:
    Please remember to 'Propose as answer' if you find a reply helpful

  • Spry Menu Bar display problem on the MAC

    Hello!
    I'm having issues with spry menu bar not displaying properly
    on the mac browser.
    i474.photobucket.com/albums/rr104/nastasia_20/DSC02618.jpg
    it should look like this
    s3.amazonaws.com/sitevista/c356ba1e-7f66-4cec-9b41-bc90b86455ee1773886_IE7.png
    You can find the page here : www.
    siia-design.com/eco_totes/modern_mums.html
    Any ideas what is wrong?
    Thank you

    Not an issue any more. I re-loaded the site w/o the menu bar
    after I made the original post (as you saw) because of the
    incompatibility issue I was having between Spry and IE6 & 7.
    Before that, I first updated Spry, re-loaded the page with Spry
    menu and still had the same IE 6 & 7 issue. Frankly, I simply
    gave up on Spry, due to time constraints in getting a new site
    layout operational (today was my deadline). From what I've read on
    these and and other forums, Spry does not play well with IE,
    especially IE7. Unfortunately for me, I don't use IE at all, so
    rely on Dreamweaver's compatibility check to tell me if all is
    well. Why Spry works so well on Safari, Firefox and Netscape, and
    not on IE, is beyond me. Thanks, anyway for your comment. Much
    appreciated.

  • Problems wit the portal in ias release 2

    Hi.
    My NEW ias release2 installation seems to be working fine but I can't make my portal work. I can log into Login Server, but when I click on my portal link I get a WWC-00000 error. My httpd.conf file has my machine name in lower case, so there shouldn't be any problem there.
    The strange thing is:
    SQL> select count(*) from WWSEC_ENABLER_CONFIG_INFO$;
    COUNT(*)
    0
    Can this have anything to do with it? How can I solve this???????
    Thanx a lot, Mere.

    Hi,
    I am assuming that you have installed 9iAS v2 (from information give by you). To solve this problem, you need to
    run opca ( you can find it in $ORACLE_HOME/portal/plsql/admin directory). Run the opca in SSOPARTNERCONFIG
    mode. You might need to run it in MIDTIER mode also if the problem doesn't go away.
    To see the examples to run opca in different modes, execute opca without any parameters.
    Hope it helps.
    Ved

  • Strange display problem on the Internet with jpgs

    Hi,
    For some time now I have problems with jpgs on some Internet sites. They don't show up properly. But only on this MAC, every other computer is ok. Here is a screencap of what I see:
    http://www.renderosity.com/mod/forumpro/showthread.php?thread_id=2690530
    It happens only on specific websites but now it also happens on MY OWN website (http://www.patrickeischen.com)! I didn't change a thing on this page, it was ok 'til now.
    I use Firefox & Safari. Can anybody please help me?
    Message was edited by: Danielle Kamp

    Hi Danielle:
    Cant use the link to your screencap, -wants login info.
    What do the jpgs look like? Sometimes I get a small square and question mark on some webpages where images should show but I just fault the webpage, or internet. Sometimes a reload works.
    Sounds like a software glitch on your PM G5, Have you repaired permissions recently?
    -Robert

  • Another Safari display problem - not the same as others

    Hello,
    Has anyone seen this happen and know what is going on? This affects both Safari and Explorer but doesn't affect Camino or other browsers.
    Thanks.
    Powerbook G4   Mac OS X (10.4.4)  

    Unfortunately it does not solve the problem. Anyway, this can't be just related to Safari cache as it seems to affect IE too. (Not that I'm using IE). On top of that, if I create a brand new user and go try it, it still looks the same. I doubt a brand new user would have a cache problem since there is no cache for that user yet!!
    Is this exactly the kind of thing you saw with your problem? I wish your solution worked. For now, I've switched to using FireFox instead, but I'm nervous that this Safari behavior is just a pre-amble of something else that is wrong with my system.
    Thanks ... anyone else?
    Powerbook G4   Mac OS X (10.4.3)  

Maybe you are looking for