Display problem in Xperia Z1 and water leak

Hello,
I am from india and i own a xperia Z1, last week i got my display changed under warranty because i had a display issue. got it back last friday(13/02/15).
Today i did a water proof test and its failed. I recorded the whole thing in video,the moment i submerged the phone in a mug of water the display started blinking then i took it out and pressed the power button thats it display totally out. i had all my side covers closed and i recorded that also. So its the fault of the service person who fixed it they didnt properly seal it. Now 36k phone's fate what is going to happen i dont know. Sony please i am a continous user of your brand and request you to fix a product again how it was while buying. within a year of buying i got display issue and now after fixing a new one this issue. anyway i am giving it again for a replacement my luck it should workout. if its not then will see the outcome of it. People or users who are reading this kindly request you to take a proof of what ever test you do with your phones.
Thanks
Koushik.

i have contacted and they have asked me to inform the service center where i changed my display. they said they will take photographs and send it to sony. but no reply from service center or sony either. Service center replies as we didnt get any reply from sony yet. i escalated the same to sony service heads, howlong will they take to reply? i am afraid whether they will take my issue into considration or they will leave just like that. I have evidence too for the water leak to show it is not my mistake.

Similar Messages

ITunes 11.1.3.8 on Windows 8.1 64 bit display problems with CD tracks and Internet Radio

Recently installed iTunes 11.1.3.8 on a Windows 8.1 64 bit machine and I have the following problems:
1) Inserting a CD in order to listen or import tracks I get no display of tracks when I click the CD drive in the side bar. The list has only white and gray lines where the tracks should have been listed and the top of the table contains some grabbed display from Music table (i.e. the first track that was displayed in Music but only 2/3 of the line. The status bar at the bottom of the iTunes window shows correct information about the number of tracks and total playing time.
2) Hitting the play button while on this CD Drive listing starts the playback but the tracks play in random sequence even though shuffle play is not selected (not blue to be precise). In the zone with track name, playback progress, elapsed and remaining time and other track options the indications are correct.
3) Importing the CD works but the tracks are imported in random order. Track information from CDDB providers is accurate eventhough nothing is displayed while selecting CD drive as per problem 1). Imported tracks in Music show in random order. This is also strange because when I was importing something from a CDDB indexed CD or even a non indexed one the tracks were always imported in the order they were written on disc.
4) Going to Music -> Internet I get the same white and gray lines with no stations displayed but this time the status bar reads Zero Stations. Obviously I can't select/listen anything
I'd say I'm quite experienced with iTunes, using it since 2005 but never had problems of this type. Some assistance would be helpful. I smell a bug that maybe shows up in my particular configuration. Searched everywhere, maybe not good enough, but couldn't find something even similar.

i have the same problem no radio stations at all bit shabby hate technolgy now adays

New iMac display problem(?) - weird colors and grain

Hello,
I'm a fresh mac user, made the switch this monday (August 27th) when my 24" iMac 2.4GHz C2D arrived. After using it for a while, I noticed a handful of dead pixels, and a semi-bright green stuck one. I thought I'd wait and see how disturbing I would find them before raising an issue about them.
Well, yesterday I decided to make my first backup of the whole system to my external 500GB Lacie drive (connected with FW800) using Super Duper!, which to my understanding is a reasonably sturdy and reliable backup application.
During the first backup iteration I started to notice some alterations in color in the top middle part of the display. I then returned to whatever I was doing (not on the mac, I had no other applications running, just Super Duper!), and after a while took another look at the display. The weird colored area had expanded, and the whole display had become somewhat grainy. Also, the backup process had slowed down quite a bit (from ~30MB/s to ~7-8MB/s).
So I cancelled the backup operation and logged out and back in again. No change. Then I restarted the whole system, which booted just fine, with none of the aforementioned problems. Even the second backup iteration went without problems.
Still, it's a new (and with my budget, quite expensive) computer, and if I get this kind of problem during the first week, I cannot continue using it happily in the fear of these problems reoccurring time and again.
I took a couple of pictures of this, one during and one after the problem. The quality of these are quite lousy, they're taken with my Nokia 9500 Communicator.
During the problem:
http://iki.fi/aita/imac/01notok.jpg
After rebooting:
http://iki.fi/aita/imac/02_ok.jpg
The images are taken in the same light conditions, but from slightly different viewing points. Note: The first image does not present reflections, it's how the screen looked (actually, in real life it looked somewhat worse)
What do you think?
Could this be a driver related issue or have I received bad hardware?
My drivers and Apple software should be up to date (at least OS X informs me that everything is, and I haven't found newer graphics drivers anywhere).
If anyone has had the same or related problems or know how I should proceed with this matter, I would be grateful.
Thank you in advance!
-Aidan from Finland

A few people, myself included, have experienced the same thing. Check these threads: http://discussions.apple.com/thread.jspa?threadID=1082181&tstart=15
http://discussions.apple.com/thread.jspa?threadID=1100912&tstart=30
http://discussions.apple.com/thread.jspa?threadID=1090395&tstart=60
So far the only fix suggested has been to call apple and get a replacement. I'm still.....still waiting for mine to make it slowly across the ocean from China, so I don't know how the new one is working. I'd call Apple and request a new one.

Display Problem--Lines around icons and mouse

My Dell monitor attached to the Mac Mini recently shows faint lines and hatchings around the mouse curser, moving along with the cursor, and also appears around the header of the desktop, dock and the icons for folders,etc. When the screen goes in sleep mode and the screen saver comes on the resolution is really bad with these same lines cutting through the images. Furthermore, the drop down menu displays the same hatchings and lines but appears all over the menu.
I've tried resetting the resolution and that did not change it. I thought the computer got too hot and put it on top of an external fan pad, but the lines and hatchings are still there. I connected the monitor to my lab top and the lines and hatchings are not there.
Could this be a problem with the video card or ram?
Thanks for any suggestions and help.

Welcome to Apple Discussions!
While this could be a hardware fault, specifically the ATI video subsystem and it's 32Mb VRAM, it could also be something simple such as a connection in the video cable.
First thing to try is to unplug the video cable (and adapter if used), and the cable at the display end, and then reconnect everything,making sure it is very tightly reconnected. Once the system is rebooted, if the problem still exists, as a double check that it isn't the cabling, gently press down and sideways on the connectors to see if there is any change or flickering in the image. If there is, then the connectors may not be making a solid connection.
If the cabling isn't the problem, there are two things to try next:
Firstly, perform a PMU reset to ensure the video subsystem is being correctly powered.
To reset the PMU
- Unplug all cables from the computer, including the power cord.
- Wait 10 seconds.
- Plug in the power cord while simultaneously pressing and holding the power button on the back of the computer.
- Let go of the power button.
- Press the power button once more to start up your Mac mini.
If that doesn't resolve it, download and run YASU (it's available at www.versiontracker.com), setting it to perform all tasks except deleting cookies. Leave it to run, without using the system for anything else while it does it. This will clear out system caches and perform a range of other spring cleaning type activities and then force the system to reboot when done. The reboot will be slower than usual and the first few minutes afterwards the system will also be a little slow as it rebuilds the cache files, but this can often resolve odd behavioral problems of this sort.
If the problem persists after that, please post back.

T61 display problem on both Internal and External monitors

Hi,
I have Lenovo T61 of Type 7662, Model CTO. One month back the right hinge of my laptop has broken. Now the display on the screen is not at all readable. If I reboot the laptop, it is getting loaded, but the display on the screen is not readable and also it is displaying 4 windows without any clear visibility.
I thought the problem may be with the LCD cable under Right hinge. So, I tried to check this with an external monitor. But, the same problem is occurring on the external monitor also. So, I couldn't find what exactly the problem is. If anybody has this kind of problem, please help me on fixing this issue.
Thanks,
RamPap.

well the GPU issue is fixable under free repair, but given that your hinge is broken, not sure whether the free warranty applies in this case.
Basically you need a new motherboard.
Also, can you post a picture of the condition of the hinge? (upload it to tinypic or flickr, then link it here).
Regards,
Jin Li
May this year, be the year of 'DO'!
I am a volunteer, and not a paid staff of Lenovo or Microsoft

N95 Display Problem. URGENT (Black and colorful mo...

Hey everyone,
I have been having a problem with the display of my N95. The Display goes BLACK and i cant see anything on the screen. Then when i hit the back or side of the phone, the display appears but turn Red/orange/blue at times and also moves all over the place.. I have seen the screen go from right to left..
I would like to mention that everything works fine with the phone EXCEPT the display... I can see the keypad lights and it also makes the key sound when i press the keys..
Anyone..? It's Urgent..

It's definitely a hardware problem with your phone. You need to take it to a nokia care point for repair. It will be free if your phone is under warranty and undamaged. If you are out of warranty you will have to pay. Only the care point can tell you the cost.
Care points/service centres and repair info:
UK • Europe • Asia-Pacific • USA •
Canada • Middle East and Africa
Elsewhere: Click here, select your country, go to the support section, then select repair.

Display problems with print commands and options

What fonts are required to be installed in windows for Reader X to display all of its component parts? My fonts were cleaned out and now the print selection screen only displays a blank image with no letters or buttons. It would be nice not to have to reinstall 1000 fonts just to find the right ones.

i have the same problem no radio stations at all bit shabby hate technolgy now adays

OS X Lion Server display problem with menu highlighting and button icons

I have attached Grab capture of my screen showing the problems with the window top bars and button icons. This happened after a routine security update.
Does anyone have an idea how to fix this?
Thanks
George Harrison

I have/had the same problem. Comparible setup running Lion Server GM. The natd service fires off the InternetSharing service from the prefspane instead of the regular natd service. This is verifiable by entries in the system log as well as the lack of the natd process running. Below are my findings from research/experimentation; please understand that this is what I have done to get it working, it is DEFINITELY not best practices and I'm sure not supported by Apple. I'm just conveying what I think is happening and how I dealt with it.
Natd - Executing the binary referenced in the launchctl job directly launches the InternetSharing service on Lion server. This does NOT act this way in SL server, where it works as expected. Replacing the Lion binaries with The SL ones results in natd working as expected: nat_start and nat_stop in /usr/libexec. In short, if you replace the Lion binaries with the ones from SL, it-s a drop-in fix. Natd isn't your only problem though...
Dns/named - It appears that Apple has limited named to binding on the loopback adapter only by default on Lion. Adding a listen-on clause to named.conf with the appropriate bindings will fix this. I'm assuming you're running natd, named and dhcpd on the same box...
Dhcpd - Works fine. It appears broken only because the InternetSharing service is replacing natd (why?!?) and it has a built-in dhcpd server (dumbed down 192.168.2.0 subnet). Once you fix natd, this runs as expected.
Firewall/ipfw - Gotta have this running so that natd will do translation. Remember to open the dhcp ports to allow the clients to get leases...
I hope this helps, I'm sticking with SL until these issues are worked out...

Problem with Xperia P and Sony Bridge for Mac

hi there,
I'm trying to update my Xperia P to ICS and, since I've not received any notification, I'm using Sony Bridge for Mac (my phone is not firmware branded).
So, i plug my phone at the mac, starting Bridge and wait for the download... until my phone turn off itself and Bridge advice me that no phone is connected. How can i solve?
Thanks

Unfortunately it's not possible to get back to Android 2.3 if you have updated to Android 4.0 I'm afraid.
To be able to sort it out and get the phone back to the way it should be - now slow or "laggy" - I'd recommend you to try performing a repair of your phone's software first of all.
Just follow the instruction above given by my colleague Samuel and you'll hopefully easily solve the issue. Fingers crossed!
What do you think about this forum? Let us know by doing this short survey.

Flex 4.5, destructionPolicy="never" and display problem

Hello,
in my firstView I have destructionPolicy="never", when in my secondView I click on the back hardware button, return in the firstView, if the orientation phone change, I have a display problem : the background appear and the spark component scroller doesn't work on my android phone.
Thanks.

Known bug. https://bugs.adobe.com/jira/browse/SDK-30126

My iPod randomly makes a noise, its like an air compressor and water dripping? \

So the other day i was playing my iPod and then a noise started like an aircompressor and water leaking. Its so random just happens, either when playing games, listening to music or just when not doing anything.
Have made sure there are no open apps, but lost as to what to do now.

Its so creepy, it's like its possessed... We havent had noise for 24hours since i rebooted, but my son is aware if it comes on again to come get me and going to record it. I was first heard when we were in the car the other day, and when he said air compressor, I thought it was the 4wd air compressor just too loud. Then he brought it to me yesterday and was really wierd. He wanted me to update the software on it but with the way i'm reading all this crashing happening, one problem is bad enough...lol

Wierd lines on my display and frequent lock-ups w/ and w/o display problems

When booting I sometimes get weird lines and blocks on my display (the GRAY Apple screen) and then it hangs, other times the computer will boot and run fine for 20-30 minutes and then the display goes wonkers with blocks and lines and the computer does not respond. The only way I can get it to boot is to reset the PRAM by letting it CHIME 3x and then occasionally it will boot without issue and run, while other times I still get the blocks and lines on the display.
When I am able to get it to recover and re-boot after the lock-up and display problems and occasionally the box in the middle asking me to re-boot similar to a kernel panic the OPS gives me the option to REPORT the error and here is the error for others who would know more...
Thank you in advance,
Darren
Interval Since Last Panic Report: 104960 sec
Panics Since Last Report: 5
Anonymous UUID: 7D1AEF43-7E19-4F58-A1E0-48FA992A2814
Wed Nov 18 15:49:50 2009
panic(cpu 0 caller 0x9cdb10): NVRM[0/1:0:0]: Read Error 0x00009410: CFG 0xffffffff 0xffffffff 0xd2000000, BAR0 0xd2000000 0x5d3e2000 0x084700a2, D0, P1/4
Backtrace (CPU 0), Frame : Return Address (4 potential args on stack)
0x5c99b7d8 : 0x21b2bd (0x5cf868 0x5c99b80c 0x223719 0x0)
0x5c99b828 : 0x9cdb10 (0xbb7fec 0xc209c0 0xbc3660 0x0)
0x5c99b8c8 : 0x147690d (0x8b5ac04 0x7edf004 0x9410 0xabd962)
0x5c99b908 : 0x1534e6a (0x7edf004 0x9410 0x5c99b968 0x9)
0x5c99b948 : 0xb51ca5 (0x7edf004 0x91ed004 0x0 0x0)
0x5c99b968 : 0xac155b (0x91ed004 0x5c99baa4 0x0 0x0)
0x5c99b9b8 : 0x145f290 (0x7edf004 0x3d0900 0x5c99baa4 0x0)
0x5c99bad8 : 0xab2821 (0x7edf004 0x91cf004 0x815200c 0x200)
0x5c99bb18 : 0xb1f172 (0x7edf004 0x91cf004 0xeb9bcc0 0xeb9bc04)
0x5c99bbc8 : 0xb202db (0x7edf004 0x91f0404 0x0 0x0)
0x5c99bc58 : 0x14bb7a3 (0x7edf004 0x91f0404 0x9 0x2)
0x5c99bd68 : 0x14ed407 (0x7edf004 0x91cf404 0x0 0x0)
0x5c99be98 : 0xad3934 (0x7edf004 0x91ca404 0x0 0x0)
0x5c99bec8 : 0x9d61fb (0x7edf004 0x91ca404 0x0 0x0)
0x5c99bf08 : 0x5491b5 (0x0 0x9499680 0x1 0x29c50a)
0x5c99bf58 : 0x5481e6 (0x9499680 0x1 0x5c99bf88 0x547d9d)
0x5c99bf88 : 0x548640 (0x8abaf00 0x7e9ecc0 0xe780850c 0x2a6e5f)
0x5c99bfc8 : 0x29d68c (0x8abaf00 0x0 0x10 0x88bbfc4)
Kernel Extensions in backtrace (with dependencies):
com.apple.nvidia.nv50hal(6.0.6)@0x136b000->0x17f1fff
dependency: com.apple.NVDAResman(6.0.6)@0x96f000
com.apple.NVDAResman(6.0.6)@0x96f000->0xc21fff
dependency: com.apple.iokit.IOPCIFamily(2.6)@0x932000
dependency: com.apple.iokit.IONDRVSupport(2.0)@0x961000
dependency: com.apple.iokit.IOGraphicsFamily(2.0)@0x943000
BSD process name corresponding to current thread: kernel_task
Mac OS version:
10C540
Kernel version:
Darwin Kernel Version 10.2.0: Tue Nov 3 10:37:10 PST 2009; root:xnu-1486.2.11~1/RELEASE_I386
System model name: MacBookPro3,1 (Mac-F4238BC8)
System uptime in nanoseconds: 3788331456483
unloaded kexts:
com.apple.driver.AppleFileSystemDriver 2.0 (addr 0xf02000, size 0x12288) - last unloaded 94521475551
loaded kexts:
org.virtualbox.kext.VBoxNetAdp 2.2.2
org.virtualbox.kext.VBoxNetFlt 2.2.2
org.virtualbox.kext.VBoxUSB 2.2.2
org.virtualbox.kext.VBoxDrv 2.2.2
com.bresink.driver.BRESINKx86Monitoring 5.0
com.pctools.iantivirus.kfs 1.0.1
com.apple.driver.AppleHWSensor 1.9.2d0 - last loaded 31800108689
com.apple.filesystems.ntfs 3.1
com.apple.filesystems.autofs 2.1.0
com.apple.driver.AppleHDA 1.7.9a4
com.apple.driver.AirPort.Atheros 412.19.4
com.apple.kext.AppleSMCLMU 1.4.5d1
com.apple.driver.SMCMotionSensor 3.0.0d4
com.apple.DontSteal_Mac_OSX 7.0.0
com.apple.driver.AudioIPCDriver 1.1.2
com.apple.driver.AppleIntelMeromProfile 19
com.apple.driver.ACPISMCPlatformPlugin 4.0.1d0
com.apple.driver.AppleLPC 1.4.9
com.apple.driver.AppleBacklight 170.0.14
com.apple.driver.AppleUpstreamUserClient 3.1.0
com.apple.GeForce 6.0.6
com.apple.driver.AppleUSBTrackpad 1.8.0b4
com.apple.driver.AppleUSBTCKeyEventDriver 1.8.0b4
com.apple.driver.AppleUSBTCKeyboard 1.8.0b4
com.apple.iokit.SCSITaskUserClient 2.6.0
com.apple.BootCache 31
com.apple.AppleFSCompression.AppleFSCompressionTypeZlib 1.0.0d1
com.apple.iokit.IOAHCIBlockStorage 1.6.0
com.apple.iokit.AppleYukon2 3.1.14b1
com.apple.driver.AppleAHCIPort 2.0.1
com.apple.driver.AppleSmartBatteryManager 160.0.0
com.apple.driver.AppleIntelPIIXATA 2.5.0
com.apple.driver.AppleUSBHub 3.8.4
com.apple.driver.AppleFWOHCI 4.4.0
com.apple.driver.AppleUSBEHCI 3.7.5
com.apple.driver.AppleUSBUHCI 3.7.5
com.apple.driver.AppleEFINVRAM 1.3.0
com.apple.driver.AppleRTC 1.3
com.apple.driver.AppleHPET 1.4
com.apple.driver.AppleACPIButtons 1.3
com.apple.driver.AppleSMBIOS 1.4
com.apple.driver.AppleACPIEC 1.3
com.apple.driver.AppleAPIC 1.4
com.apple.security.sandbox 0
com.apple.security.quarantine 0
com.apple.nke.applicationfirewall 2.1.11
com.apple.driver.AppleIntelCPUPowerManagementClient 96.0.0
com.apple.driver.AppleIntelCPUPowerManagement 96.0.0
com.apple.driver.DspFuncLib 1.7.9a4
com.apple.driver.AppleProfileReadCounterAction 17
com.apple.driver.AppleProfileTimestampAction 10
com.apple.driver.AppleProfileThreadInfoAction 14
com.apple.driver.AppleProfileRegisterStateAction 10
com.apple.driver.AppleProfileKEventAction 10
com.apple.driver.AppleProfileCallstackAction 20
com.apple.iokit.IOFireWireIP 2.0.3
com.apple.iokit.IO80211Family 310.6
com.apple.iokit.IOSurface 73.0
com.apple.iokit.IOBluetoothSerialManager 2.2.4f3
com.apple.iokit.IOSerialFamily 10.0.3
com.apple.iokit.IOAudioFamily 1.7.2fc1
com.apple.kext.OSvKernDSPLib 1.3
com.apple.driver.AppleHDAController 1.7.9a4
com.apple.iokit.IOHDAFamily 1.7.9a4
com.apple.iokit.AppleProfileFamily 41
com.apple.driver.AppleSMC 3.0.1d2
com.apple.driver.IOPlatformPluginFamily 4.0.1d0
com.apple.nvidia.nv50hal 6.0.6
com.apple.NVDAResman 6.0.6
com.apple.iokit.IONDRVSupport 2.0
com.apple.iokit.IOGraphicsFamily 2.0
com.apple.driver.CSRUSBBluetoothHCIController 2.2.4f3
com.apple.driver.AppleUSBBluetoothHCIController 2.2.4f3
com.apple.iokit.IOBluetoothFamily 2.2.4f3
com.apple.iokit.IOUSBHIDDriver 3.8.4
com.apple.driver.AppleUSBMergeNub 3.8.5
com.apple.driver.AppleUSBComposite 3.7.5
com.apple.iokit.IOSCSIMultimediaCommandsDevice 2.6.0
com.apple.iokit.IOBDStorageFamily 1.6
com.apple.iokit.IODVDStorageFamily 1.6
com.apple.iokit.IOCDStorageFamily 1.6
com.apple.driver.XsanFilter 402.1
com.apple.iokit.IONetworkingFamily 1.9
com.apple.iokit.IOATAPIProtocolTransport 2.5.0
com.apple.iokit.IOSCSIArchitectureModelFamily 2.6.0
com.apple.iokit.IOAHCIFamily 2.0.2
com.apple.iokit.IOATAFamily 2.5.0
com.apple.iokit.IOUSBUserClient 3.8.5
com.apple.iokit.IOFireWireFamily 4.1.7
com.apple.iokit.IOUSBFamily 3.8.5
com.apple.driver.AppleEFIRuntime 1.3.0
com.apple.iokit.IOHIDFamily 1.6.1
com.apple.iokit.IOSMBusFamily 1.1
com.apple.kext.AppleMatch 1.0.0d1
com.apple.security.TMSafetyNet 6
com.apple.driver.DiskImages 281
com.apple.iokit.IOStorageFamily 1.6
com.apple.driver.AppleACPIPlatform 1.3
com.apple.iokit.IOPCIFamily 2.6
com.apple.iokit.IOACPIFamily 1.3.0
Model: MacBookPro3,1, BootROM MBP31.0070.B07, 2 processors, Intel Core 2 Duo, 2.2 GHz, 4 GB, SMC 1.16f11
Graphics: NVIDIA GeForce 8600M GT, GeForce 8600M GT, PCIe, 128 MB
Memory Module: global_name
AirPort: spairportwireless_card_type_airportextreme (0x168C, 0x87), Atheros 5416: 2.0.19.4
Bluetooth: Version 2.2.4f3, 2 service, 0 devices, 1 incoming serial ports
Network Service: AirPort, AirPort, en1
PCI Card: pci168c,24, sppci_othernetwork, PCI Slot 5
Serial ATA Device: ST9320421ASG, 298.09 GB
Parallel ATA Device: MATSHITADVD-R UJ-857E
USB Device: Built-in iSight, 0x05ac (Apple Inc.), 0x8502, 0xfd400000
USB Device: Apple Internal Keyboard / Trackpad, 0x05ac (Apple Inc.), 0x021a, 0x5d200000
USB Device: Bluetooth USB Host Controller, 0x05ac (Apple Inc.), 0x8205, 0x1a100000
Anyone know what is causing my problems? I thought it was heat so I downloaded a CPU and FAN temperature monitor and the CPU was getting VERY HOT at first so I then ramped-up the CPU FAN SPEED to maximum - it turns out the CPU FAN was not rotating well at low speed - since then I have cleaned and checked the fans and they all work as they should and blow on high(er) when the CPU temperature is above a certain level.

S.U.
Is there a kb article or something that would illuminate what to look for in these logs, or is it a matter of learning by osmosis?
Both. I am not skilled in reading logs. It is a very technical and time consuming task for the uninitiated (me!) In scanning a log I look for the backtrace and loading dependencies. The first item in the backtrace is usually the roadblock.
Beyond that you can look at the Technical Note TN2063: Understanding and Debugging Kernel Panics
Should make for good bedtime reading. Puts you right to sleep.
c

Mid 2010 Macbook Pro sleep and external display problem

I recently upgraded to the new 2010 15 inch core i7 Macbook Pro. The problem i have is that it will not detect an external display (23inch Cinema) after waking from sleep. This happens after using the display to extend the desktop and also when using the Macbook in closed mode.
I've managed to get it to detect the display only after either restarting the Macbook completely or by going into energy saver and switching to dedicated graphics then going back to detect display.
It seems that when on integrated graphics it doesn't register that an external display is connected. If i leave a program open and running that causes the dedicated graphics to kick in then it works ok. If i close all programs, shut the macbook pros lid, computer sleeps and external display shuts off. If i click the mouse to wake with lid closed, apple logo lights, machine starts up few seconds later macbook returns to sleep. If i open the screen the machine wakes as normal but the external monitor doesn't.
Any help is much appreciated as its starting to frustrate me now...
Many thanks
oh and im running OSX 10.6.3

I thought it was intermittent to begin with until i started looking into it. By leaving programs open, like aperture, before i put the machine to sleep it appears to wake the external monitor up without a problem. If i shut all programs or leave basic things open like safari and mail which don't require the dedicated graphics, then upon wake it wont register an external screen is connected.
Manually detecting displays in settings doesn't work.
Disconnecting and reconnecting mini display port doesn't work.
Turning off power to cinema display and powering back up doesn't work.
To get the display going again its either 1) turn off macbook pro and re-boot or 2) re-start the machine then the display is automatically recognised. Or 3) launch a programme that kicks in dedicated graphics then manually go in and detect displays again..... like magic the display then springs to life.
No ideas anyone??

Macbook and HP 2510i monitor display problem - help

Hello,
I am having display problem with my Macbook (Intel) and my 25'' HP 2510i monitor via DVI.. Until last monday I do not have any problems and my monitor was working flawless with my macbook.. Last monday I used the monitor with my HP Notebook to try Windows 8 on large screen. And after that try when I connect the monitor back to Macbook there is no display.. I tried the steps below
- I connected Macbook to my Phillips Plasma TV and it worked (no error with display card of Macbook or the wire or the adaptor)
- I connected the monitor back to HP laptop it worked.. (so no error with the monitor)
- I unplugged monitor to cut electricity and tried.. nope not working
- I did several tricks with macbook no effect
- I reinstalled Mountain Lion .. no effect
- I formatted Macbook, reinstalled Snow Leopard.. Not working.. I installed back Mountain Lion .. not working
Whatever I tried the HP2510i is not displaying, mirroring my Macbook..
Any help will be appreciated
Thanks

My graphic card details;
NVIDIA GeForce 9400M:
Chipset Model:          NVIDIA GeForce 9400M
Type:          GPU
Bus:          PCI
VRAM (Total):          256 MB
Vendor:          NVIDIA (0x10de)
Device ID:          0x0863
Revision ID:          0x00b1
ROM Revision:          3462

Having problems connecting iMac(late 2006) running 10.7.5 to a Samsung Flat Screen TV using separate audio/speaker cable and HDMI standard cable, mini-DVI to HDMI video converter. TV displays generic Apple galaxy background and "some" windows (e.g. scree

Not sure that I have selected the correct forum. Hope my questions are clearly stated.
Having problems connecting iMac(late 2006) running 10.7.5 to a Samsung Flat Screen TV using separate audio/speaker cable and HDMI standard cable, mini-DVI to HDMI video converter. TV displays generic Apple galaxy background and "some" windows (e.g. screen resolution choices). It does not show Mail or Safari menus. System preferences' display "gathered" the Samsung and chose its resolution. I did not find a way to select the Samsung as my display.
In addition to having old hardware, we have Verizon FIOS providing internet and TV access. Is there any way to make this work for us? We would like to stream video (Netflix) and view shows from the Web. Do we need Apple TV to do this? Or is it not possible with our old iMac? My husband thinks that our Airport could be a factor.
Thank you

Lately, I have been seeing a lot of posts with users trying to use their Macs/iMacs to mirror their streaming video from their Macs to an HDTV.
There are, actually, many alternatives to choose from than just from a Mac.
You need to have or invest in a WiFi capable router for all of these examples.
Apple TV only integrates with WiFi and newer Mac hardware. So, if you want to have total integrated experience, if you have a 2011 Mac or newer, you might as well pay the $100 for the AppleTV box.
If you have a older Mac, like I have noticed many users do, then you have other options.
If you want to elimate long cable clutter and having your Mac at the mercy of your TV all of the time, you can still use the AppleTV box independently or purchase cheaper alternative media streaming boxes from Roku, Sony, Boxee or any number of electronics manufacturers that now have media streaming boxes and media streaming capability built into DVD/Blu-ray players.
These eliminate long cable clutter by being close to the HDTV where shorter, less expensive cables can be used.
Another alternative for iPad users is to use an iPad with the USB/HDMI video adapter and use your iPad as the streaming box. This ties up your iPad in much the same way as it does with your Mac, but again the iPad can be close to the TV and use minimal cables to the TV.
Another alternative to is to use a combination of an iPad and your Mac to stream content that is only available to stream online from a computer. In this case, you can use a desktop remote app on your iPad and Mac. A good and cheap Desktop Remote app is Splashtop Remote. This allows you to completely connect your iPad remotely, over Wifi, to your iMac desktop. The app streams both video and sound to the iPad which is still connected to your HDTV. The resultant stream video picture will be smaller than the size of your HDTV, but it will still be plenty large enough to watch. Again, if you own a iPad and an Intel Mac, this method also allows minimal cabling to the TV.

Display problem in Xperia Z1 and water leak

Similar Messages

Maybe you are looking for