Display problems in Data Quality for Data Integrator

Hello,
I have some problems when i try to "create join". When I click to add a filter, a window appears but nothing is displayed...
http://img255.imageshack.us/img255/1379/filterentitymo5.jpg
I have the same problem when I add "entity business rule", the right part of the window is empty.
http://img87.imageshack.us/img87/2735/businessrulezb8.jpg
Is somebody has a way to solve this problem ?

HI ^^
Where are you from?
I'm Korean.
My English is not good.
I suffered the same problem.
http://kr.forums.oracle.com/forums/thread.jspa?threadID=590681&tstart=0
regards
Seo

Similar Messages

Data integrator for HP-UX missing data quality and data profiling

Hi All,
I have installed ODI 10.1.3.40.0 from odi_unix_generic_10.1.3.4.0.zip in HP unix 11.23.
Data quality and data profiling is missing in that zip ? Could anyone please help me how to get installer of data quality and data profiling for Oracle data integrator in HP UX 11.23.
Any response will be highly appreciated.
Thanks in advance.
regards
Umapada
Edited by: user10612738 on Nov 28, 2008 1:54 AM

The integrated packaged( ODi, data quality and data profiling) for HP-UX wount available till 10.1.3.5.0 which will be released by this year end.

I have been a loyal customer for years and have a hot spot because internet options are very limited in our rural area. I have stayed with 10G since the beginning. Most months I don't use the 10G. Verizon has no problem with me paying for Data I don't

I have been a loyal customer for years and have a hot spot because internet options are very limited in our rural area. I have stayed with 10G since the beginning. Most months I don't use the 10G. Verizon has no problem with me paying for Data I don't use. This month my daughter comes home from College and she accidentally uses 24G.....14 over get blind sided with $140.00 in overages. I called Verizon today......stopped in to the store today......My neighbor told me they waved charges for her one time. Lots of charges.....But I'm am getting no help. Not even an offer of a payment plan to help me out. I went back just 6 months and I have over paid for 19G.....Seems like they would like to help out their loyal customers!!!! Does anybody have any suggestions on how to deal with them? We are not wealthy....or I would just pay this and walk away......

There is a big misconception in what customers believe a cell carrier is obligated to do.
You pay a set price to use up to that amount of xx data. It makes no difference if you use it to the paid limit or way under. Its like peace of mind when you don't have to worry about a data counter.
Your daughter used the data, your plan is quite clear of what overage charges are. Why should or would Verizon wireless just forgive the charges because you are a customer? Your daughter used the data, get the money from her. That is the responsible thing to do.
There is no "I have been a loyal customer so please remove the $120, or $250, or $2,000.00 since I did not mean to use it"
Your electric company, or gas company or any other company does not remove valid charges. Why should Verizon wireless?
Just pay the invoice and don't think you are being mistreated because Verizon is a business and not a charity.
Good Luck

Problem in Web adi for custom integrator.

Hi All,
I never used Web ADI. i read some document and feel that it is easy... but facing problem while developing.
The basic requirement as follows -
1. There is a custom database, say XXA.
2. A staging table (xxa_table) for upload data from csv files to base table.
3. Data upload using concurrent program from xxa_table to base table is working fine; but now I need to upload csv file from user desktop and load the csv data into staging table (xxa_table).
After applying below scripts I got some permission access error.
Please guide me to setup for upload csv data in to staging table using web adi.
So I run below scripts -
DECLARE
P_INTEGRATOR_CODE      VARCHAR2(30);
P_INTERFACE_CODE      VARCHAR2(30);
P_LAYOUT_CODE           VARCHAR2(30);
P_APPLICATION_ID      NUMBER(15);
P_OBJECT_CODE           VARCHAR2(20);
P_INTEGRATOR_USER_NAME      VARCHAR2(240);
P_LANGUAGE           VARCHAR2(4);
P_SOURCE_LANGUAGE      VARCHAR2(4);
P_USER_ID           NUMBER(15);
P_INTERFACE_TABLE_NAME      VARCHAR2(50);
P_INTERFACE_USER_NAME      VARCHAR2(240);
P_FORCE           BOOLEAN;
P_ALL_COLUMNS           BOOLEAN :=FALSE;
BEGIN
-- Define Constants
-- Application ID of the product that will own this Integrator
P_APPLICATION_ID      := 510;
P_LANGUAGE           := 'US';
P_SOURCE_LANGUAGE      := 'US';
-- Applications Database User ID that owns this Integrator
P_USER_ID           := 410;
P_OBJECT_CODE           := PLAN_607';
---ADI details
P_INTEGRATOR_USER_NAME      := 'Plan_7';
P_INTERFACE_TABLE_NAME      := 'xxa_table'; -- Name of the Database staging table.
P_INTERFACE_USER_NAME      := 'XXA_7 PLAN'; -- Name of the table that will be displayed in
P_FORCE           := FALSE;
P_ALL_COLUMNS           := FALSE;
BNE_INTEGRATOR_UTILS.CREATE_INTEGRATOR (P_APPLICATION_ID,
                         P_OBJECT_CODE,
                         P_INTEGRATOR_USER_NAME,
                         P_LANGUAGE,
                         P_SOURCE_LANGUAGE,
                         P_USER_ID,
                         P_INTEGRATOR_CODE);
BNE_INTEGRATOR_UTILS.CREATE_INTERFACE_FOR_TABLE (P_APPLICATION_ID,
                         P_OBJECT_CODE,
                              P_INTEGRATOR_CODE,
                              P_INTERFACE_TABLE_NAME,
                              P_INTERFACE_USER_NAME, P_LANGUAGE,
                              P_SOURCE_LANGUAGE, P_USER_ID,
                              P_INTERFACE_CODE);
BNE_INTEGRATOR_UTILS.CREATE_DEFAULT_LAYOUT(P_APPLICATION_ID,
                         P_OBJECT_CODE,
                         P_INTEGRATOR_CODE,
                         P_INTERFACE_CODE,
                    P_USER_ID,
                    P_FORCE,
                    P_ALL_COLUMNS,
                         P_LAYOUT_CODE);
COMMIT;
END;
--------------------

Duplicate thread (please post only once):
Problem in Web adi for custom integrator
Re: Problem in Web adi for custom integrator

Odi-data quality and data profiling

Would odi-ee license be sufficient to use,odi data quality and data profiling.
We plan to use odi to migrate data from legacy databases to oracle 11g data base.
Do we have to use odi data quality and profiling.

Hi after 11.1.1.3 version of ODI release, oracle no longer supports ODP/ODQ which is a trillium software product and this not owned by oracle. Oracle is recommending the usage OEDQ for quality purposes. It's better if you could spend time on OEDQ rather than trying to learn and implement ODP/ODQ in ODI

How to set a date range for date field ?

Dear Experts,
Scenario:
I have a query in validating the date field in my BSP application. My application is for maintain infotype 0023 Other/Previous Employers online by employees in the company.
As per our design we are maintaining the all employment details of the employee both ( with in the current company / previous employment outside the company) in the same infotype.
Every employee will have a hiring date within the SAP HR system. We consider this date as the cutoff date between current and previous employment in our application. When the employee updating the details wia BSP page I need to check the following.
Record inside current company: Validation that, the user should only able to enter BEGIN DATE (BEGDA) greater than or equal HIRING DATE and END DATE(ENDDA) should be greater than FROM DATE (BEGDA).
Record outside current Company: Validation that, the user should only able to enter BEGIN DATE (BEGDA) less than or equal HIRING DATE and END DATE (ENDDA) should be greater than FROM DATE (BEGDA) and less than HIRING DATE.
Technical Requirement:
How to set a date range for date field, i.e. how we can limit the date range in a HTMLB date field? Can this it be achieved via standard functionality of HTMLB?
Following is the code to describe date field in my application.
    <htmlb:inputField id= "ENDDA_NEW_IN"
                      type= "date"
                doValidate= "TRUE"
                  showHelp= "TRUE"
                  disabled= "FALSE"
                     width= "183"
                     style= "cssTextAreadate"
                     value= "<%='99991231'%>"/>
Thanks a lot in advance for your assistance and help.
Cibinu2026
Edited by: cibin kuruvilla on Nov 12, 2008 11:13 AM

Hi,
This functionality is known to be very important and is a key part of the next major release of the JRC planned for the first half of 2008.
Regards,
<p>Blair Wheadon</p>
<p>Product Manager, Crystal Reports</p>

Data validation for Date Field in Web Dynpro ABAP

Hi ,
In my WDA i want to perform data validation for date filed. (i.e. While creating a new record i have to check the Start Date should be always lesser than End Date.)
If u ll enter the wrong date it should validate the Date and throw an error message.
Please Reply soon its urgent.
Thanks,
Deepika

Hi,
First read the two attributes start date and end date.
Then write the following condition.
IF item_start_date > item_end_date.
Error message.
Endif.
For pop up error message you need to use Create_window method of the Interface if_wd_window.
Thanks.

Oracle Enterprise Data Quality for ODI

Hi,
1.     Can we install the below EDQ products on single machine
-Enterprise Data Quality Profiling for Oracle Data Integrator
-Enterprise Data Quality Batch Processing for Oracle Data Integrator
2.     How do we size EDQ ? and what is the preferred architecture ?
3.     Does “Enterprise Data Quality Profiling for Oracle Data Integrator” & “Enterprise Data Quality Batch Processing for Oracle Data Integrator” have same installation media ?
Thanks & Regards,
NC

You should find all you need in the Getting Started guide in the online help.
I recommend using the introductory wizard when first launching Director- this will take you through creating a project, connecting to some data, and creating a profiling process.

Just used Match consolidations & match comparison with data quality for add

I recently started to look for jobs on BODS and data quality i used data quality match consolidations.
Are there any ither impt elements which are widely used in the industry from data quality perspective?
Kind regards.
Edited by: cplusplus1 on Feb 8, 2012 7:08 AM

I am not entirely sure I understand your question. We do have Data Quality blueprints for use in Data Services available. You can find these on the SCN.
The SAP Community Network hosts several Data Quality blueprints which are available for download. Go to http://www.sdn.sap.com/irj/sdn/ds, and if necessary enter your user id and password or create an account.
Scroll down to Downloads and click the link in Samples Data Services Blueprints. There are several download packages that specialize in different areas and one that has all available samples contained in one download package.
Note: A "review" page displays after clicking the link of the blueprint to be downloaded. Click View this Code Sample to download the file.
Hope this is helpful.
Thanks,
Paula

Oracle enterprise data quality for product(PDQ)

Hi,
i am looking for tutorial or training material for oracle pdq(product data quality).
can anybody please suggest where can i find good material or hands on tutorials?
Thank you
Raghu.Vujjini

You should find all you need in the Getting Started guide in the online help.
I recommend using the introductory wizard when first launching Director- this will take you through creating a project, connecting to some data, and creating a profiling process.

Problems with F4 help for dates

Hi all.
In a redesign project we use a new structure for the bsp pages. Since the redesign every F4 help for dates is giving us a java script error.
Row:      689
Column: 3
Error:     'document.all.sapDate.style' is NULL or no object
Code:    0
URL:      http://<server>:<port>/wbw(bD1..)/main.do
In the first version it was a view with some page fragments included containing the F4 helps.
The new application is a main view containing a changing view over command <bsp:call comp_id="...
Does the difference in place used matter?
I also removed the attribute themeRoot from <htmlb:content ...
Thanks for every hint,
Timo.

I have exactly the same problem, someone can tell me how to fix it please ?
Here is my code for the "date" field :
CASE p_column_index.
        WHEN 1.
          DATA: tv_col1_inputfield TYPE REF TO cl_htmlb_inputfield.
          CREATE OBJECT tv_col1_inputfield.
          tv_col1_inputfield->id    = p_cell_id.
          tv_col1_inputfield->cellvalue = 'TRUE'.
          tv_col1_inputfield->value = '20000131'.
          tv_col1_inputfield->type = 'DATE'.
          tv_col1_inputfield->showhelp = 'TRUE'.
          tv_col1_inputfield->disabled = 'FALSE'.
          p_replacement_bee      = tv_col1_inputfield.
Edited by: BB.Fethi on Feb 8, 2010 2:10 PM
Ok sorry for this post, i haven't see the "remove tag htmlb:page"....
Edited by: BB.Fethi on Feb 8, 2010 2:13 PM

Data Quality for name and address

Hello,
We have OWB10G and would like to use Name and Address operator. It seesm to me that we need to buy some Data Quality library from some 3rd party ( FirstLogic etc). Our client is not ready to pay money to buy these 3rd party libraries. How would we go and still be able to use Name and address operator.
I was in the impression that OWB has some builtin Data Quality libraries. Do we have to write some PL/SQL to clean , parse , match and merge data or it can be done using OWB? Why OWB does not have these libraries built-in.
Is there some freely available Data Quality tool?
Thanks
Suhail Ahmad

bump again,
Oracle used to have pure extraxt and integrate, could we use these libraries with OWB10G?
Syed

Data length for Date is 7 in all_tabs_columns

I am fetching data_length, data_type from all_tabs_columns for a table in my schema. It is returning data_length=7 for data_type='date'. When i am fetching records based upon this information using SQL_EXECUTE package, the date record returned is of format DD-MON-YY. ie for date '01-JAN-1949', it is fetching '01-JAN-49'.
Please Suggest.

Dear Francois,
I might not be able to exlplain it properly but the problem is when i am executing the query in SQL*Plus, I can retrive the correct data(as'01-JAN-1949'). But when when the same query is executed using a EXEC_SQL package of forms 6i, the data returned is incorrect('01-JAN-2049'/'01-JAN-0049'depending upon the format mask-RRRR/YYYY).
I think there is some issue related to Dynamic SQL being used in EXEC_SQL package may be with EXEC_SQL.DEFINE_COLUMN or EXEC_SQL.COLUMN_VALUE or EXEC_SQL.EXECUTE???
Please Suggest.

Date Dimension for date pull up (Dimension to Dimension)

Need advise....
1. I have a person dimension table and sales fact table. Person_id is the foreign key in the fact. I want to be able to pull the date of birth. But the person dimension has only dob_sid that should point to the day dimension to get my the equivalent date. This is the problem...i cannot join person dimension to day dimension, i need to be able to do a join through fact, but the fact table is missing the dob_sid.
2. Second issue is, person dimension has other dates associated action_date, cancel_date, etc. more than one date field that i need to join to day dimension.
How will i be able to achieve this in BMM? Physcial layer?

The key here (no pun intended) is to alias your date dimension for as many date lookups you require, join these aliases directly to your person dimension off the appropriate keys.

Open data slice for data entry and close afterwards

Dear all,
I have created one data slice for a characteristic combination country xy in order to prevent the data entry within the data entry query for the user. But for some reason I have to run a planning function in order to summarize some values and write a total value in the characteristic e.g. country xy.
The planning function brings out an error message because this can not be executed due to the fact that this combination is protected.
Is there a way to open the data slice before the planning function is writing the data in the cube? I have tried to to this in the Data slice exit, but I do not have an idea how to open the DS, save the data and close the DS again.
We are running NW BI 7.0. Any ideas would be great.
Best regards,
Stefan from Munich/Germany

I did something like this by creating an FM and calling that FM from a FOX function. I think you will have to use three commands to execute three functions one after the other (and not combine them in one planning sequence) - first one will switch off the data slice, next will be your planning function containing the logic, and the last will switch it back on.
The FM would be something like below:
FUNCTION Z_SWITCH_DSLICE.
*"*"Local Interface:
*" IMPORTING
*"     REFERENCE(I_INFOPROV) TYPE RSINFOPROV
*"     REFERENCE(I_DSNR) TYPE RSPLS_DSNR
*"     REFERENCE(I_STATUS) TYPE I
*** This function imports the name of a real-time Infoprovider and a Data Slice number
***        and a parameter I_STATUS. If I_STATUS is 1, data slice is activated
***        If I_STATUS is -1, data slice is de-activated
data wa_ds type rspls_ds.
select single * from rspls_ds
        into wa_ds
        where infoprov = I_INFOPROV
          AND objvers = 'A'
          AND dsnr = I_DSNR.
if I_status = 1.
   wa_ds-used = 'X'.
elseif I_status = -1.
   wa_ds-used = ''.
endif.
update rspls_ds from wa_ds.
ENDFUNCTION.
The Fox code will be like below -
CALL FUNCTION Z_SWITCH_DSLICE
    EXPORTING
       I_INFOPROV = <infoprov name>
       I_DSNR = <Data Slice Number>
       I_STATUS = <0 or 1>.

Display problems in Data Quality for Data Integrator

Similar Messages

Maybe you are looking for