Display problems with NVIDIA K5000 card for Mac

I have recently switched cards in my Mac to the heavier NVIDIA K5000 card. While great for After Effects and Premiere, I get wild artifacting in Indesign CC 2014.
Is this a know issue and how can I (hopefully) solve this?
Albert

I've branched this issue to a new discussion as it was unrelated to the problem the other folks were seeing.
We continue to widen the number of video cards that we support GPU acceleration on. It sounds like this is what you're running into.
Since it's unrelated to Protected Mode, definitely go back and make sure that you've removed the line from your mms.cfg that you may have added while troubleshooting that problem. Disabling Protected Mode in general is a bad idea, and will leave you vulnerable to many modern classes of attacks over the long term.
If you haven't updated to the latest available drivers for your graphics hardware, please do that. It may eliminate the issue you're experiencing.
If that doesn't work, please check out our graphics troubleshooting guide:
http://helpx.adobe.com/flash-player/kb/video-playback-issues.html
If you're still stuck after this, please file a bug here: http://bugbase.adobe.com/
Please reply to the thread with the Bug ID, so that I can follow up on it.
Also, include the output of dxdiag.
To do that, click Start > Run
Type the following, then press [Enter]:
dxdiag
Click Save All Information

Similar Messages

How do you setup HDMI audio with "Nvidia Quadro 4000 for Mac"?

So I just purchased a new Mac Pro:
Mac Pro (5,1) 3.33 GHz 6-Core
8 GB Ram
ATI Radeon HD 5770
1TB HDD
OS 10.8.3
I also purchased a new Nvidia Quadro 4000 for Mac Graphics Card because the 3D animation software I'm using (Blender) requires this card to accelerate render times.
I have installed the card and all is working well as far as I can tell except for the HDMI audio. According to the specs on Nvidia for this card, it DOES support HDMI audio through the Display port. I have my HDMI cable plugged up and the video works great. However the audio option does not show up in the System Preferences. (Here is the page for the graphics card. Look under "specifications" at the bottom for the audio part. http://www.nvidia.com/object/product-quadro-4000-mac-us.html).
I did find a link for a kernel addition for HDMI audio but it stated "non-Apple Nvidia cards" and this one is specifically for Mac. Here is that link: http://forums.macrumors.com/showthread.php?t=1499797. (I also plan on posing the same question there.)
The reason I want the HDMI to work is I'm using a TV as my monitor.
Now I did try the HDMI with the ATI Card and both the audio and video work great.
What I did for a quick work around is install both cards and use the GPU processor on the Nvidia for the animation program and use the ATI for the actual port and this fixes the hdmi audio issue. However this takes up pretty much all of my PCI slots and seems like a waste of space and power.
Has anyone else run into this problem and found a solution?? Any guidance would be greatly appreciated.
Thanks!

I went ahead and tried that extension that I found. It worked!
I guess Mac just didn't include the audio support in the driver that it includes. Below is were I found the instructions and download. It includes a shell script that installs the kernal from the Terminal prompt. The instructions were clear and installed with out a hitch. There were also instructions to remove it if there were issues.
Here is the link:
http://forums.macrumors.com/showthread.php?t=1499797
Thanks again and hope this helps.

Problems with the new Pages for Mac

I'm starting to see countless problems running the new Pages for Mac (5.0.1) and I can't find a way to resolve them.
1. when I'm typing and want to delete word(s), I'll use the alt+delete function for ease, however this starts deleting words after the cursor, merging words together and changing my sentece. It comes from when I'm deleting as the new pages is giving me the dropdown menu for the autocorrect word.
2. grammar check is off. Namely, it picks a random point in a word and moves on from there. EX: "because of the" will have "use of the" underlined in green and give me recommendations to change to "because of the" or "cause of the". Using those recommendations, I'll end up with something like: "becabecause of the"
3. the find and replace function jumps around in the paper, and sometimes doesn't even display the word currently selected (leaving the user to scroll around looking for what is selected)
4. Autocorrect has vanished for some reason: no autocapitalization, no turning fractions such as 1/2 into a tidy and neat fraction with small numbers for numerators/denominators, etc.
I'm still using it, and these are what I have found, so there may be more later as I continue to use it. If anyone has found ways around these bugs, please let me know.
Thanks!

Semnani wrote:
4. Autocorrect has vanished for some reason: no autocapitalization, no turning fractions such as 1/2 into a tidy and neat fraction with small numbers for numerators/denominators, etc.
Pages 5 now uses the system autocorrect, which does not have as many features as the one inside Pages 4. Some things you can add manually there. Others you have to ask Apple to add via
http://www.apple.com/feedback
Or continue to use Pages 4 instead.

Tty display problems with nvidia and uvesafb

I'm trying to get my console to display correctly at 1080p; trying to do so through GRUB was always an absolute nightmare.
The console displays fine with nouveau, but nouveau causes the infamous pink line bug, which is simply too irritating to ignore; nouveau is not an option.
In the past, my console has run at low res and incorrect scale with nvidia, but I've ignored the problem since I prefer to use a virtual terminal in X.
Now, if possible, I need to use the actual console for the purposes of module development.
I installed v86d and uvesafb and configured the console for 1920x1080 and 32 bit depth.
The console is displaying with the correct resolution now, but is surrounded by a black border, making the font distorted and extremely difficult to read.
How can I get my console to scale correctly to fullscreen? Any ideas at all. I found nothing in the forums or wiki, and I'm out.
I'm fairly certain there are no vga or video settings in GRUB that are interfering.

Output of "pacman -Qi nvidia"
Name : nvidia
Version : 343.36-2
Description : NVIDIA drivers for linux
Architecture : x86_64
URL : http://www.nvidia.com/
Licenses : custom
Groups : None
Provides : None
Depends On : linux>=3.17 linux<3.18 nvidia-libgl nvidia-utils=343.36
Optional Deps : None
Required By : None
Optional For : None
Conflicts With : None
Replaces : None
Installed Size : 5.30 MiB
Packager : Felix Yan <[email protected]>
Build Date : Thu 11 Dec 2014 08:32:19 AM CST
Install Date : Fri 12 Dec 2014 12:10:32 AM CST
Install Reason : Explicitly installed
Install Script : Yes
Validated By : Signature
Output "cat /boot/grub/grub.cfg"
# DO NOT EDIT THIS FILE
# It is automatically generated by grub-mkconfig using templates
# from /etc/grub.d and settings from /etc/default/grub
### BEGIN /etc/grub.d/00_header ###
insmod part_gpt
insmod part_msdos
if [ -s $prefix/grubenv ]; then
load_env
fi
if [ "${next_entry}" ] ; then
set default="${next_entry}"
set next_entry=
save_env next_entry
set boot_once=true
else
set default="0"
fi
if [ x"${feature_menuentry_id}" = xy ]; then
menuentry_id_option="--id"
else
menuentry_id_option=""
fi
export menuentry_id_option
if [ "${prev_saved_entry}" ]; then
set saved_entry="${prev_saved_entry}"
save_env saved_entry
set prev_saved_entry=
save_env prev_saved_entry
set boot_once=true
fi
function savedefault {
if [ -z "${boot_once}" ]; then
saved_entry="${chosen}"
save_env saved_entry
fi
function load_video {
if [ x$feature_all_video_module = xy ]; then
insmod all_video
else
insmod efi_gop
insmod efi_uga
insmod ieee1275_fb
insmod vbe
insmod vga
insmod video_bochs
insmod video_cirrus
fi
set menu_color_normal=green/black
set menu_color_highlight=black/green
if [ x$feature_default_font_path = xy ] ; then
font=unicode
else
insmod part_msdos
insmod ext2
set root='hd0,msdos1'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd0,msdos1 --hint-efi=hd0,msdos1 --hint-baremetal=ahci0,msdos1 337acc84-0300-43b1-b426-79391d39e898
else
search --no-floppy --fs-uuid --set=root 337acc84-0300-43b1-b426-79391d39e898
fi
font="/usr/share/grub/unicode.pf2"
fi
if loadfont $font ; then
set gfxmode=auto
load_video
insmod gfxterm
set locale_dir=$prefix/locale
set lang=en_US
insmod gettext
fi
terminal_input console
terminal_output gfxterm
insmod part_msdos
insmod ext2
set root='hd0,msdos1'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd0,msdos1 --hint-efi=hd0,msdos1 --hint-baremetal=ahci0,msdos1 337acc84-0300-43b1-b426-79391d39e898
else
search --no-floppy --fs-uuid --set=root 337acc84-0300-43b1-b426-79391d39e898
fi
insmod png
background_image -m stretch /boot/grub/archgrub.png
if [ x$feature_timeout_style = xy ] ; then
set timeout_style=menu
set timeout=5
# Fallback normal timeout code in case the timeout_style feature is
# unavailable.
else
set timeout=5
fi
### END /etc/grub.d/00_header ###
### BEGIN /etc/grub.d/10_linux ###
menuentry 'Arch Linux' --class arch --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-simple-337acc84-0300-43b1-b426-79391d39e898' {
load_video
insmod gzio
insmod part_msdos
insmod ext2
set root='hd0,msdos1'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd0,msdos1 --hint-efi=hd0,msdos1 --hint-baremetal=ahci0,msdos1 337acc84-0300-43b1-b426-79391d39e898
else
search --no-floppy --fs-uuid --set=root 337acc84-0300-43b1-b426-79391d39e898
fi
echo 'Loading Linux linux ...'
linux /boot/vmlinuz-linux root=UUID=337acc84-0300-43b1-b426-79391d39e898 rw quiet
echo 'Loading initial ramdisk ...'
initrd /boot/initramfs-linux.img
submenu 'Advanced options for Arch Linux' $menuentry_id_option 'gnulinux-advanced-337acc84-0300-43b1-b426-79391d39e898' {
menuentry 'Arch Linux, with Linux linux' --class arch --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-linux-advanced-337acc84-0300-43b1-b426-79391d39e898' {
load_video
insmod gzio
insmod part_msdos
insmod ext2
set root='hd0,msdos1'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd0,msdos1 --hint-efi=hd0,msdos1 --hint-baremetal=ahci0,msdos1 337acc84-0300-43b1-b426-79391d39e898
else
search --no-floppy --fs-uuid --set=root 337acc84-0300-43b1-b426-79391d39e898
fi
echo 'Loading Linux linux ...'
linux /boot/vmlinuz-linux root=UUID=337acc84-0300-43b1-b426-79391d39e898 rw quiet
echo 'Loading initial ramdisk ...'
initrd /boot/initramfs-linux.img
menuentry 'Arch Linux, with Linux linux (fallback initramfs)' --class arch --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-linux-fallback-337acc84-0300-43b1-b426-79391d39e898' {
load_video
insmod gzio
insmod part_msdos
insmod ext2
set root='hd0,msdos1'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd0,msdos1 --hint-efi=hd0,msdos1 --hint-baremetal=ahci0,msdos1 337acc84-0300-43b1-b426-79391d39e898
else
search --no-floppy --fs-uuid --set=root 337acc84-0300-43b1-b426-79391d39e898
fi
echo 'Loading Linux linux ...'
linux /boot/vmlinuz-linux root=UUID=337acc84-0300-43b1-b426-79391d39e898 rw quiet
echo 'Loading initial ramdisk ...'
initrd /boot/initramfs-linux-fallback.img
### END /etc/grub.d/10_linux ###
### BEGIN /etc/grub.d/20_linux_xen ###
### END /etc/grub.d/20_linux_xen ###
### BEGIN /etc/grub.d/30_os-prober ###
### END /etc/grub.d/30_os-prober ###
### BEGIN /etc/grub.d/40_custom ###
# This file provides an easy way to add custom menu entries. Simply type the
# menu entries you want to add after this comment. Be careful not to change
# the 'exec tail' line above.
### END /etc/grub.d/40_custom ###
### BEGIN /etc/grub.d/41_custom ###
if [ -f ${config_directory}/custom.cfg ]; then
source ${config_directory}/custom.cfg
elif [ -z "${config_directory}" -a -f $prefix/custom.cfg ]; then
source $prefix/custom.cfg;
fi
### END /etc/grub.d/41_custom ###
### BEGIN /etc/grub.d/60_memtest86+ ###
### END /etc/grub.d/60_memtest86+ ###
Output "cat /usr/lib/modprobe.d/uvesafb.conf"
Video mode is set as "1920x1080-32".
# This file sets the parameters for uvesafb module.
# The following format should be used:
# options uvesafb mode=<xres>x<yres>[-<bpp>][@<refresh>] scroll=<ywrap|ypan|redraw> ...
# For more details see:
# http://git.kernel.org/?p=linux/kernel/git/torvalds/linux-2.6.git;a=blob;f=Documentation/fb/uvesafb.txt
options uvesafb mode_option=1920x1080-32 scroll=ywrap
This file is mirrored in /etc/modprobe.d/uvesafb.conf.
Running "diff /usr/lib/modprobe.d/uvesafb.conf /etc/modprobe.d/uvesafb.conf" returns no output.
Output of "cat /sys/class/graphics/fb0/virtual_size" is solely "1920,1080".
---edit---
Output of "cat /etc/default/grub" in case it's helpful.
GRUB_DEFAULT=0
GRUB_TIMEOUT=5
GRUB_DISTRIBUTOR="Arch"
GRUB_CMDLINE_LINUX_DEFAULT="quiet"
GRUB_CMDLINE_LINUX=""
# Preload both GPT and MBR modules so that they are not missed
GRUB_PRELOAD_MODULES="part_gpt part_msdos"
# Uncomment to enable Hidden Menu, and optionally hide the timeout count
#GRUB_HIDDEN_TIMEOUT=5
#GRUB_HIDDEN_TIMEOUT_QUIET=true
# Uncomment to use basic console
GRUB_TERMINAL_INPUT=console
# Uncomment to disable graphical terminal
#GRUB_TERMINAL_OUTPUT=console
# The resolution used on graphical terminal
# note that you can use only modes which your graphic card supports via VBE
# you can see them in real GRUB with the command `vbeinfo'
GRUB_GFXMODE=auto
# Uncomment to allow the kernel use the same resolution used by grub
#GRUB_GFXPAYLOAD_LINUX=keep
# Uncomment if you want GRUB to pass to the Linux kernel the old parameter
# format "root=/dev/xxx" instead of "root=/dev/disk/by-uuid/xxx"
#GRUB_DISABLE_LINUX_UUID=true
# Uncomment to disable generation of recovery mode menu entries
GRUB_DISABLE_RECOVERY=true
# Uncomment and set to the desired menu colors. Used by normal and wallpaper
# modes only. Entries specified as foreground/background.
GRUB_COLOR_NORMAL="green/black"
GRUB_COLOR_HIGHLIGHT="black/green"
# Uncomment one of them for the gfx desired, a image background or a gfxtheme
GRUB_BACKGROUND="/boot/grub/archgrub.png"
#GRUB_THEME="/path/to/gfxtheme"
# Uncomment to get a beep at GRUB start
#GRUB_INIT_TUNE="480 440 1"
#GRUB_SAVEDEFAULT="true"
Also, it might help to describe the behaviour more specifically / more in depth...
The rendered part of the console occupies the same space as the GRUB boot menu.
I installed and configured virtualbox a few weeks previously.
I ran "sudo depmod -a" as the wiki / forums indicated it could remedy problems with virtual machines failing to start.
It did fix the virtualbox problem; after reboot, suddenly lightdm *also* initally occupied the same window space as grub.
That was new behaviour. When I logged in to xmonad, the desktop displayed similarly to GRUB.
I hadn't tried fixing it; logging in with root followed by "ps -e | grep X" and "kill -9 <Xpid>" caused X as a whole to start behaving and scaling normally.
I haven't rebooted until attempting to rectify the issue with my console.
The oddity with scaling in lightdm and xmonad still shows up after reboot and is still reparable by killing X.
Killing X doesn't - obviously - have any effect on console scale.
---/edit---
d(-_-)
Last edited by seppukuzushi (2014-12-31 14:01:23)

Problem with nvidia graphic card, nvlddmkm.sys

I have a HP m9000 , originally it had Vista, it started to fail and display the error nvlddmkm.sys (on a blue screen od death), i intalled Windows 8 in hope the problem get resolve. but the problem still persist. At the beginning on W8 it looks like working fine, but suddenly it started to display "controller not responding", and then it is displayin "Something goes wrong with your graphic card".
I found on internet a fix; expanding the nvlddmkm.sy_ and replace the file in system32. i made it but right now after the windows logon screen the monitor starts to blink between black screen and off screen.
The grapghic card is a NVIDIA 8500 GT. I tested the graphic card in other computer, and at the begining it worked fine, but after the dirver installation it started to fail in the same way.
Ad far i could read on intetrnet it is a failure with NVIDIA.
Is there any solution for this problem? Or i should change the graphic video card? (Maybe for an ATI)

Hi,
I have used many different NVIDIA cards (including a 8600) on different PCs and never had your issue.
As for drivers, you can always use the original drivers that came with your PC and then do an update if necessary.
HP DV9700, t9300, Nvidia 8600, 4GB, Crucial C300 128GB SSD
HP Photosmart Premium C309G, HP Photosmart 6520
HP Touchpad, HP Chromebook 11
Custom i7-4770k,Z-87, 8GB, Vertex 3 SSD, Samsung EVO SSD, Corsair HX650,GTX 760
Custom i7-4790k,Z-97, 16GB, Vertex 3 SSD, Plextor M.2 SSD, Samsung EVO SSD, Corsair HX650, GTX 660TI
Windows 7/8 UEFI/Legacy mode, MBR/GPT

Strange problems with nvidia video card

Hi, I don't know if it's really a problem, but I suppose...
I had in the last days serious problems with the nvidia card and ubuntu (see ubuntuforums or askubuntu).
Resuming I couldn't boot ubuntu if the nvidia card was enabled...
Now I only use windows because of this problem but I have another doubt: why the power manager sometimes don't show me the GPU usage (see image)?
In any case the nvidia (I think) is always working (the external monitor plugged in the DisplayPort works... I think that's a confirmation)
Another question: at times when I watch video on youtube the nvidia is enabled at others not... is this a problem of optimus or not?
For me it's important that windows works (no problem if ubuntu doesn't works.. I posted the links of the problems with ubuntu just for information on what's happened before this problem with windows..

I'm using Firefox with html 5...
But I also tried also with chrome, in which the html 5 mode in youtube is not activate, and I have the same problem...
I find it strange because if i have the monitor plugged in the nvidia GPU is activated (of course) and if i'm whatching a video on youtube when i disconnect the monitor the GPU won't switch to the intel but it still remains the nvidia activated until i close this video..

Problem with Flash in Firefox for MAC

Hello,
I have a little trouble with flash in firefox ...
In fact, when I go on websites via firefox and it is the flash ... animation or flash application in meeting the latency to the point that even the youtube player lag when I also want to press the pause button (to pause the video) ...
Major latency problem also when I play games in flash ...
I tested the same sites in Safari and then everything is nikel I do not understand ...
I deleted the files "Player.plugin Flash" and "flashplayer.xpt" in the library of mac and reinstalling flash but it has not helped!
Configuration: Mac OS X
Firefox 3.5.3
Désolé si mon anglais n'est pas parfait, je l'ai traduit avec google ...
je suis français
FRENCH VERSION :
Bonjour,
J'ai un petit soucis avec flash sous firefox...
En effet, quand je vais sur des sites via firefox et qu'il y a du flash... l'animation ou application sous flash rencontre des latences à tel point que même le player youtube lag également quand je souhaite appuyer sur le bouton pause (pour mettre en pause la vidéo)...
Gros problème de latence également quand je joue à des jeux sous flash... style "le 4ème duel"
j'ai tester les mêmes sites sous SAFARI et là tout est nikel je ne comprends pas ...
j'ai supprimé les fichiers "Flash Player.plugin" et "flashplayer.xpt" dans la bibliothèque de mac et réinstaller flash mais cela n'a rien arrangé !!!
Configuration: Mac OS X
Firefox 3.5.3

That is a Microsoft Word issue, so you will get the best results asking over on the Microsoft Office for Mac forums on Microsoft's web site. Many people here don't use MS Word, while everyone there does.

Problems with Windows Media Player for Mac's

Is it safe to download and opperate Windows media player for Mac's to view video on the web ?
Anybody has experience with it ? What are possible problems that may be encountered ? Thanks for any input or feedback.

"Is it safe to download and opperate Windows media player"
Sure, why not?
You should know that's it's discontinued, and no longer developed by Microsoft, and therefore will never be native to Intel Macs. You should look to the free Flip4Mac QuickTime plugin from flip4mac.com

Sync problem with Blackberry Desktop Software for Mac

Can someone help. I have synchronization problem with my contact in the Outlook for Mac using blackberry desktop software for mac. Seems all details in my blackberry handheld contact got synchronized, but not email addresses (so all names, jobs, companies, work phone, mobile - all got synchronized, but not email addresses). All data is in my handheld. I wish I could just "replace" (not merge/sync) outlook contact with all contact in the handheld but seems there is no option to do that. Let me know please if someone has similar experience and has found out solution. Thanks!

Can someone help. I have synchronization problem with my contact in the Outlook for Mac using blackberry desktop software for mac. Seems all details in my blackberry handheld contact got synchronized, but not email addresses (so all names, jobs, companies, work phone, mobile - all got synchronized, but not email addresses). All data is in my handheld. I wish I could just "replace" (not merge/sync) outlook contact with all contact in the handheld but seems there is no option to do that. Let me know please if someone has similar experience and has found out solution. Thanks!

New problems with Acrobat 11.03 for Mac

I'm having new problems with my Adobe Acrobat 11.03 for Mac. These issues are relatively new and did not occur when I first bought the product about 9 months ago.
1) When scanning documents from an HP scanner into Adobe on my Mac, the scanning works fine, but a multi-page document (scanned as one) is saved as a separate PDF for each page. Bothersome to then have to combine all those separate files into one doc. I can do it, just don't think I should have to take the time.
2) Occasionally, when working in Adobe, the menu bar at the top will disappear when I click on the Adobe icon or a previously saved PDF. Very frustrating. Can't make a note or save the document without knowing the shortcuts, as the menu has disappeared. Once I click somewhere outside Adobe, the menu bar reappears for the other programs. This happens over and over.
Any ideas?
Thanks.

Hey JeffSPHR,
Please refer this KB doc link mentioned below and try troubleshooting scanner issues:
Troubleshoot scanning problems | Mac OS
Let me know if this helps.
Regards,
Anubha

Problems with updating MSN Messenger for Mac

Install the MSN Messenger for Mac from Application. When I signed in, a message pop up asking me to get a new updated version or else I could not continue to use the MSN Messenger. During downloading, another message pop up saying that the Messenger.bin is neither compressed .... and I could not go any further,and as such could not use MSN Messenger. What's the problem here?

nkmz02:
Welcome to Apple Discussions.
To download click here.
Good luck.
cornellius
Message was edited by: cornelius

Download problem with Acrobat XI Pro for MAC

I purchased Acrobat XI full for MAC download, but when I click download I keep getting plug-in failure. Using Safari, already tried downloading and installing the latest version of flash player and that did not help.

Hi jmp123456789,
Alternatively you can try downloading it from the direct download links available at : http://prodesigntools.com/adobe-acrobat-xi-pro-standard-reader-direct-download-links.html
But make sure you follow the important steps mentioned on the page before initiating the download.

Problem with nvidia video card GTX670 in PS CC

I have been using PE10, but have just installed Photoshop CC v. 13.1.2 x64. Although my video card (nvidia GTX 670, 2 gb RAM) is recognized by Photoshop, when I check "use graphics processor" under "preferences/performance" the converted RAW image is somewhat blurred at all zoom levels (except 100%) compared to when it is unchecked and sharp (for both Canon 1100D and 6D). The problem may possibly reside in the RAW conversion, because if I convert the file with "use graphics processor" unchecked, and then subsequently check it after it has been opened, the image is not blurry and I have access to all of the video card supported functions. Has anyone else experienced this problem, and found a solution? Thanks, artmar4 (intel i5-3670, 24 gb RAM, Windows 7, 64 bit).

artmar4 wrote:
I must admit it's not intuitve to me that the image would be somewhat blurred when clicking on "fit screen" and "fill screen" (but then what do I know.)
The GPU image-interpolation for display is more sophisticated than that of the CPU, but both methods cannot avoid compromising the image quality in some way in order to reduce the scale of an image. The GPU method can produce blurry results whereas the CPU method can produce ragged results.
Both methods produce very good results when the zoom is 100% divided by a power of two. However, "Fit Screen" and "Fill Screen" won't give a nice neat zoom level like that, except on very rare occasions when an image has a particular size relative to the screen.
Here's a (hideous) contrived example of the blurriness of GPU versus the raggedness of CPU. First is the image at 100% zoom. Then the doc on the left of each screenshot is being scaled by the GPU, the doc on the right by the CPU. Click the images to view without forum resampling!

Problems with blackberry desktop manager for Mac

I just updated the software and during the sync it wants to erase all calendar entries and notes. Has anyone else had this issue and can it be fixed

There is a separate forum for the Mac desktop software. I'll ask a moderator to move this thread.

Display Problem with my Mac Pro and LG Flatron Wide Monitor in Mountain Lion

After upgrading to Mountain Lion, my Mac Pro has display problems with my LG Flatron display. The image is displayed with a black bar on the right and on the bottom. And the left side of the content is not visible. I tried every resolution available in the Display System Preferences, they are different in terms of how big the black bars are, and what part is not visible, but none of them are correct. I held down the option key to try to detect displays or switch to resolutions that are not normally available. When I restart the image is lined up with the display, but if the display ever goes to sleep or gets turned off, the image reverts to being off center, and the only way I can get it back is to restart... The interesting thing is that this monitor works fine with the same machine if I reboot using BootCamp into Windows 7. The Monitor also works fine, connecting the same connector to a Mac Mini, although that mac mini is running 10.6 and not Mountain Lion. I've reset the SMC and restarted countless times, I don't see any other levers to pull or things to try...

That card is for a PC it may not give you Startup and Option-Boot screens.
The 7950 "Mac Edition" card has a very distinctive look:
http://www.sapphiretech.com/presentation/product/product_index.aspx?cid=1&gid=3& sgid=1157&pid=1777&psn=&leg=0&lid=1

Display problems with NVIDIA K5000 card for Mac

Similar Messages

Maybe you are looking for