Display profiles changing randomly

I have noticed in Snow Leopard, after creating a calibrated display profile, that I have to keep re-applying the profile several times throughout the day, usually after the screen saver activates. Has anyone else had this issue? Does anyone know a fix so that I don't have to go to system preferences every 30 minutes or so to apply the profile?
Thanks!!

K T,
I tried what you suggested, re-applied my desktop settings and I still get the same problem. After coming back to my system with the screen saver on, one of the monitors has changed, is very bright, and washed out and requires me to re-apply the calibrated settings.
If it helps, my system has dual monitors, with 2 Nvidia 120 video cards and is using the DVI connections with Sceptre X24 monitors.
Thank you

Similar Messages

IP Profile changing randomly

One of the problems I face after ringing bt for help about 2 weeks about being a new customer (3 weeks) and having latency probems any gamer would be unhappy with.
Download speedachieved during the test was - 10740 Kbps
For your connection, the acceptable range of speedsis 100-500 Kbps.
Additional Information:
Your DSL Connection Rate :21595 Kbps(DOWN-STREAM), 1163 Kbps(UP-STREAM)
IP Profile for your line is - 548 Kbps
The throughput of Best Efforts (BE) classes achieved during the test is - 11.69:17.75:70.57 (SBE:NBEBE)
These figures represent the ratio while sententiously passing Sub BE, Normal BE and Priority BE marked traffic.
The results of this test will vary depending on the way your ISP has decided to use these traffic classes.
Quad Core 3.42ghz @ idle/load 29/37C (water cooler)
Northbridge 2.2ghz / HyperLink 2ghz
4gb ram gt 1.600mhz
4870x1 2gb vram vapper
wireless (free)

I only checked this after seeing my connection consistenly drop down to 1mb.
This was never like this in my trial time and so I did not have to wait all the time for web pages to load.
Im being riped off. and at what point did you think id pay for this? lol 6 years isnt it?
Quad Core 3.42ghz @ idle/load 29/37C (water cooler)
Northbridge 2.2ghz / HyperLink 2ghz
4gb ram gt 1.600mhz
4870x1 2gb vram vapper
wireless (free)

Randomly changing Display Profiles during user switch

I keep my MBP Display Profile set to "Color LCD" (which is the default, I think -- System Preferences>Displays>Color>"Color LCD")
Sometimes, and it seems intermittent and random, when I do a fast user switch from my wife's profile (also set on "Color LCD") to mine, right after the rotation animation finishes, the setting randomly changes to "Generic RGB Profile" and all the colors skew blue. Very annoying.
Any idea what's causing this? Any help would be appreciated.
Thanks,
Chip

Hmmm... Well, that seems to be a decent description of the symptoms, although what's happening on my screen is a lot more dramatic than what they describe in the article. Also, I don't believe I'm using a custom color profile.
I'll try the DMProxy trick and see what happens. Thanks for the tip.
Chip

Changing the display profile for multiple users at once.

Is it possible to change the display profile for multiple users at once? We would like ot be able ot add tabs and channels globally, but right now we can anly do it for once user at a time. Also, is it possible to have certain generic display profiles that all users use? like an admin profile and a tech support profile and a normal suer profile? Any help is appreciated...

Yes this possible using the dpadmin batch command.
Please check the dpadmin documentation for the batch command.
For generic display profile what you can do is create users and assign the user particular roles. The display you would be creating would be for the roles. The users belonging to that role would inherit that display profile.
HTH ..

Interface/Gamma issue - Display profiling

If you profile/calibrate your display (with professional software) to Gamma L* - darkish, grey boxes appear in some application-windows. Never happend in Tiger so I figure it's a Leopard issue.*
If you use Gamma 1.8, the Apple default, Photoshops windows (in my case) look perfekt. With Gamma 2.2 they're barely noticable (pretty much only if you know the boxes are there).
All the other settings you can choose while profiling - like temperature, luminance, chromatic adaption, profile-type etc. don't influence windows in this way - but as soon as you change the gamma those boxes appear.
I would very much like to know how you guys deal with it - do you profile your display to 1.8/2.2 (like a CRT) OR do you use L* and live with the boxes OR have you profiled your display properly/with L* but you don't have this nuisance? (!?)
Any help/info would be greatly appreciated.

*So here's what I think happens (+ my idea to solve the grey-boxes issue):*
Some applications use the monitor-profile to draw their interface. Like Photoshop and Graphic Converter. (The only 2 I've installed, I'm sure some video-editing-applications, even players are concerned that's maybe the reason some people think it's 'random'). I think these apps do so to immediately can reflect a change in the profile, without restart.
Now Mac OS X Leopard seems to not allow these applications to do so in certain parts of the interface. (Must be new, that's why there were no issues with Tiger) The window itself is drawn by the OS. That's the reason only elements like the text and buttons are affected.
And the problem is that the OS uses its 'Generic RGB Profile.icc' which contains Gamma 1.8. So if you calibrate your display with Gamma L* (which you really should do and most profiling-software does by default) those grey boxes appear in said applications.
The solution is easy. Replace the system-rgb-profile with one that supports L* - like the eciRGB profiles.
To do so you have to rename the .icc file in finder but also edit the information inside (which can be done with the ColorSync Utility). Then copy it to the System/Library/ColorSync/Profiles folder.
*After that the grey boxes dissapear and everything is back to normal.* There's some difference in the tabular data like the CMM and a chroma-entry, so you might want to re-write your display-profile just to make sure everything's alright.
I haven't seen anything yet but could imagine that the rendering of webpages in safari might be affected. Or rather some webbrowsers' without colour management. (Just a theory, hopefully not...)
*Problem 1:*
Some Adobe apps can see that the current system-profile is identical to your working-space-rgb and reset your rgb-choice to the Generic RGB profile after a restart. (Without changing the 'Colormanagement SYNC'd icon/setting.) This probably could cause trouble if you export or open files.
Solution:
Use a different profile for your system than your Adobe-RGB setting. I used the 'L-Star RGB v2' for the system and the 'eciRGB v2' for Adobe. They're technically identical but for some reason Photoshop and esp. Illustrator now respect my choices and don't reset anything. Works fine for me.
*Problem 2:*
Besides the aforementioned chroma-entry in the Apple default profile (which loss shouldn't cause any issues) there's also the localisation information. Because the profile is named differently in different languages of OS X. I haven't found anything causing trouble (probably because if the profile isn't found it resets back to the english version by default).
Solution:
This would be easy if someone knows about a .icc file editor. If we could add those localised names from the Apple profile no application would ever know. I've only found hexadecimal editors but won't put something like that on my machine, especially since everything works fine.
*I hope Apple comes up with a real solution soon, this seems like too much of a hack - considering the delicate nature of colour management.*
*If you read this and know what I'm talking about and disagree or know any reasons why one would not want to do this - please speak up! I'm sure I'm not the only one who would like to know.*
This is pretty much mirrored on the Adobe forums btw.

My macbook air (version 10.9.4) display flickers, has random tabs and windows opening, and there are random ads almost everywhere. All this happens when I am using safari. What can I do?

My macbook air (version 10.9.4) display flickers, has random tabs and windows opening, and there are random ads almost everywhere. All this happens when I am using safari. What can I do?

1. This procedure is a diagnostic test. It changes nothing, for better or worse, and therefore will not, in itself, solve the problem. But with the aid of the test results, the solution may take a few minutes, instead of hours or days.
Don't be put off merely by the seeming complexity of these instructions. The process is much less complicated than the description. You do harder tasks with the computer all the time.
2. If you don't already have a current backup, back up all data before doing anything else. The backup is necessary on general principle, not because of anything in the test procedure. Backup is always a must, and when you're having any kind of trouble with the computer, you may be at higher than usual risk of losing data, whether you follow these instructions or not.
There are ways to back up a computer that isn't fully functional. Ask if you need guidance.
3. Below are instructions to run a UNIX shell script, a type of program. As I wrote above, it changes nothing. It doesn't send or receive any data on the network. All it does is to generate a human-readable report on the state of the computer. That report goes nowhere unless you choose to share it. If you prefer, you can read it yourself without disclosing the contents to me or anyone else.
You should be wondering whether you can believe me, and whether it's safe to run a program at the behest of a stranger. In general, no, it's not safe and I don't encourage it.
In this case, however, there are a couple of ways for you to decide whether the program is safe without having to trust me. First, you can read it. Unlike an application that you download and click to run, it's transparent, so anyone with the necessary skill can verify what it does.
You may not be able to understand the script yourself. But variations of the script have been posted on this website thousands of times over a period of years. The site is hosted by Apple, which does not allow it to be used to distribute harmful software. Any one of the millions of registered users could have read the script and raised the alarm if it was harmful. Then I would not be here now and you would not be reading this message.
Nevertheless, if you can't satisfy yourself that these instructions are safe, don't follow them. Ask for other options.
4. Here's a summary of what you need to do, if you choose to proceed:
☞ Copy a line of text in this window to the Clipboard.
☞ Paste into the window of another application.
☞ Wait for the test to run. It usually takes a few minutes.
☞ Paste the results, which will have been copied automatically, back into a reply on this page.
The sequence is: copy, paste, wait, paste again. You don't need to copy a second time. Details follow.
5. You may have started the computer in "safe" mode. Preferably, these steps should be taken in “normal” mode, under the conditions in which the problem is reproduced. If the system is now in safe mode and works well enough in normal mode to run the test, restart as usual. If you can only test in safe mode, do that.
6. If you have more than one user, and the one affected by the problem is not an administrator, then please run the test twice: once while logged in as the affected user, and once as an administrator. The results may be different. The user that is created automatically on a new computer when you start it for the first time is an administrator. If you can't log in as an administrator, test as the affected user. Most personal Macs have only one user, and in that case this section doesn’t apply. Don't log in as root.
7. The script is a single long line, all of which must be selected. You can accomplish this easily by triple-clicking anywhere in the line. The whole line will highlight, though you may not see all of it in the browser window, and you can then copy it. If you try to select the line by dragging across the part you can see, you won't get all of it.
Triple-click anywhere in the line of text below on this page to select it:
PATH=/usr/bin:/bin:/usr/sbin:/sbin:/usr/libexec;clear;cd;p=(Software Hardware Memory Diagnostics Power FireWire Thunderbolt USB Fonts SerialATA 4 1000 25 5120 KiB/s 1024 85 \\b%% 20480 1 MB/s 25000 ports ' com.clark.\* \*dropbox \*GoogleDr\* \*k.AutoCAD\* \*k.Maya\* vidinst\* ' DYLD_INSERT_LIBRARIES\ DYLD_LIBRARY_PATH -86 ` route -n get default|awk '/e:/{print $2}' ` 25 N\\/A down up 102400 25600 recvfrom sendto CFBundleIdentifier 25 25 25 1000 MB com.apple.AirPortBaseStationAgent 464843899 51 5120 files );N5=${#p[@]};p[N5]=` networksetup -listnetworkserviceorder|awk ' NR>1 { sub(/^$[0-9]+$ /,"");n=$0;getline;} $NF=="'${p[26]}')" { sub(/.$/,"",$NF);print n;exit;} ' `;f=('\n%s: %s\n' '\n%s\n\n%s\n' '\nRAM details\n%s\n' %s\ %s '%s\n-\t%s\n' );S0() { echo ' { q=$NF+0;$NF="";u=$(NF-1);$(NF-1)="";gsub(/^ +| +$/,"");if(q>='${p[$1]}') printf("%s (UID %s) is using %s '${p[$2]}'",$0,u,q);} ';};s=(' /^ *$|CSConfigDot/d;s/^ */ /;s/[-0-9A-Fa-f]{22,}/UUID/g;s/(ochat)\.[^.]+(\..+)/\1\2/;/Shared/!s/\/Users\/[^/]+/~/g ' ' s/^ +//;/(de|[nst]):/p;' ' {sub(/^ +/,"")};/r:/;/y:/&&$2<'${p[10]} ' 1s/://;3,6d;/[my].+:/d;s/^ {4}//;H;${ g;s/\n$//;/s: [^EO]|x([^08]|02[^F]|8[^0])/p;} ' ' 5h;6{ H;g;/P/!p;} ' ' ($1~/^Cy/&&$3>'${p[11]}')||($1~/^Cond/&&$2!~/^N/) ' ' /:$/{ N;/:.+:/d;s/ *://;b0'$'\n'' };/^ *(V.+ [0N]|Man).+ /{ s/ 0x.... //;s/[()]//g;s/(.+: )(.+)/ (\2)/;H;};$b0'$'\n'' d;:0'$'\n'' x;s/\n\n//;/Apple[ ,]|Intel|SMSC/d;s/\n.*//;/\)$/p;' ' s/^.*C/C/;H;${ g;/No th|pms/!p;} ' '/= [^GO]/p' '{$1=""};1' ' /Of/!{ s/^.+is |\.//g;p;} ' ' $0&&!/ / { n++;print;} END { if(n<200) print "com.apple.";} ' ' $3~/[0-9]:[0-9]{2}$/ { gsub(/:[0-9:a-f]{14}/,"");} { print|"tail -n'${p[12]}'";} ' ' NR==2&&$4<='${p[13]}' { print $4;} ' ' END { $2/=256;if($2>='${p[15]}') print int($2) } ' ' NR!=13{next};{sub(/[+-]$/,"",$NF)};'"`S0 21 22`" 'NR!=2{next}'"`S0 37 17`" ' NR!=5||$8!~/[RW]/{next};{ $(NF-1)=$1;$NF=int($NF/10000000);for(i=1;i<=3;i++){$i="";$(NF-1-i)="";};};'"`S0 19 20`" 's:^:/:p' '/\.kext\/(Contents\/)?Info\.plist$/p' 's/^.{52}(.+) <.+/\1/p' ' /Launch[AD].+\.plist$/ { n++;print;} END { print "'${p[41]}'";if(n<200) print "/System/";} ' '/\.xpc\/(Contents\/)?Info\.plist$/p' ' NR>1&&!/0x|\.[0-9]+$|com\.apple\.launchctl\.(Aqua|Background|System)$|'${p[41]}'/ { print $3;} ' ' /\.(framew|lproj)|\):/d;/plist:|:.+(Mach|scrip)/s/:[^:]+//p ' '/^root$/p' ' !/\/Contents\/.+\/Contents|Applic|Autom|Frameworks/&&/Lib.+\/Info.plist$/ { n++;print;} END { if(n<1100) print "/System/";} ' '/^\/usr\/lib\/.+dylib$/p' ' /Temp|emac/{next};/(etc|Preferences|Launch[AD].+)\// { sub(".(/private)?","");n++;print;} END { print "'${p[41]}'.plist\t'${p[42]}'";if(n<500) print "Launch";} ' ' /\/(Contents\/.+\/Contents|Frameworks)\/|\.wdgt\/.+\.([bw]|plu)/d;p;' 's/\/(Contents\/)?Info.plist$//;p' ' { gsub("^| |\n","\\|\\|kMDItem'${p[35]}'=");sub("^...."," ") };1 ' p '{print $3"\t"$1}' 's/\'$'\t''.+//p' 's/1/On/p' '/Prox.+: [^0]/p' '$2>'${p[43]}'{$2=$2-1;print}' ' BEGIN { i="'${p[26]}'";M1='${p[16]}';M2='${p[18]}';M3='${p[31]}';M4='${p[32]}';} !/^A/{next};/%/ { getline;if($5<M1) a="user "$2"%, system "$4"%";} /disk0/&&$4>M2 { b=$3" ops/s, "$4" blocks/s";} $2==i { if(c) { d=$3+$4+$5+$6;next;};if($4>M3||$6>M4) c=int($4/1024)" in, "int($6/1024)" out";} END { if(a) print "CPU: "a;if(b) print "I/O: "b;if(c) print "Net: "c" (KiB/s)";if(d) print "Net errors: "d" packets/s";} ' ' /r\[0\] /&&$NF!~/^1(0|72\.(1[6-9]|2[0-9]|3[0-1])|92\.168)\./ { print $NF;exit;} ' ' !/^T/ { printf "(static)";exit;} ' '/apsd|BKAg|OpenD/!s/:.+//p' ' (/k:/&&$3!~/(255\.){3}0/ )||(/v6:/&&$2!~/A/ ) ' ' $1~"lR"&&$2<='${p[25]}';$1~"li"&&$3!~"wpa2";' ' BEGIN { FS=":";} { n=split($3,a,".");sub(/_2[01].+/,"",$3);print $2" "$3" "a[n]" "$1;b=b$1;} END { if(b) print("\n\t* Code injection");} ' ' NR!=4{next} {$NF/=10240} '"`S0 27 14`" ' END { if($3~/[0-9]/)print$3;} ' ' BEGIN { L='${p[36]}';} !/^[[:space:]]*(#.*)?$/ { l++;if(l<=L) f=f"\n "$0;} END { F=FILENAME;if(!F) exit;if(!f) f="\n [N/A]";"file -b "F|getline T;if(T!~/^(AS.+ (En.+ )?text$|POSIX sh.+ text ex)/) F=F" ("T")";printf("\nContents of %s\n%s\n",F,f);if(l>L) printf("\n ...and %s more line(s)\n",l-L);} ' ' /^ +[NP].+ =/h;/^( +D.+[{]|[}])/{ g;s/.+= //p;};' 's/0/Off/p' ' END{print NR} ' ' /id: N|te: Y/{i++} END{print i} ' ' / / { print "'"${p[28]}"'";exit;};1;' '/ en/!s/\.//p' ' NR!=13{next};{sub(/[+-M]$/,"",$NF)};'"`S0 39 40`" ' $10~/$L/&&$9!~"localhost" { sub(/.+:/,"",$9);print $1": "$9;} ' '/^ +r/s/.+"(.+)".+/\1/p' 's/(.+\.wdgt)\/(Contents\/)?Info\.plist$/\1/p' 's/^.+\/(.+)\.wdgt$/\1/p' ' /l: /{ /DVD/d;s/.+: //;b0'$'\n'' };/s: /{ /V/d;s/^ */- /;H;};$b0'$'\n'' d;:0'$'\n'' x;/APPLE [^:]+$/d;p;' ' /^find: /d;p;' "`S0 44 45`" );c1=(system_profiler pmset\ -g nvram fdesetup find syslog df vm_stat sar ps sudo\ crontab sudo\ iotop top pkgutil 'PlistBuddy 2>&1 -c "Print' whoami cksum kextstat launchctl sudo\ launchctl crontab 'sudo defaults read' stat lsbom mdfind ' for i in ${p[24]};do ${c1[18]} ${c2[27]} $i;done;' defaults\ read scutil sudo\ dtrace sudo\ profiles sed\ -En awk /S*/*/P*/*/*/C*/*/airport networksetup mdutil sudo\ lsof test );c2=(com.apple.loginwindow\ LoginHook '" /L*/P*/loginw*' '" L*/P*/*loginit*' 'L*/Ca*/com.ap*.Saf*/E*/* -d 1 -name In*t -exec '"${c1[14]}"' :CFBundleDisplayName" {} \;|sort|uniq' '~ $TMPDIR.. \( -flags +sappnd,schg,uappnd,uchg -o ! -user $UID -o ! -perm -600 $' '.??* -path .Trash -prune -o -type d -name *.app -print -prune' :${p[35]}\" :Label\" '{/,}L*/{Con,Pref}* -type f ! -size 0 -name *.plist -exec plutil -s {} \;' "-f'%N: %l' Desktop L*/Keyc*" therm sysload boot-args status " -F '\$Time \$Message' -k Sender kernel -k Message Req 'bad |Beac|caug|dead[^bl]|FAIL|fail|GPU |hfs: Ru|inval|jnl:|last value [1-9]|n Cause: -|NVDA$|pagin|proc: t|Roamed|rror|ssert|Thrott|tim(ed? ?|ing )o|WARN' -k Message Rne 'Goog|ksadm|SMC:' -o -k Sender fseventsd -k Message Req 'SL' " '-du -n DEV -n EDEV 1 10' 'acrx -o comm,ruid,%cpu' '-t1 10 1' '-f -pfc /var/db/r*/com.apple.*.{BS,Bas,Es,J,OSXU,Rem,up}*.bom' '{/,}L*/Lo*/Diag* -type f -regex .\*[cgh] ! -name *ag \( -exec grep -lq "^Thread c" {} \; -exec printf \* \; -o -true $ -execdir stat -f:%Sc:%N -t%F {} \;|sort -t: -k2 |tail -n'${p[38]} '-L {/{S*/,},}L*/Lau* -type f' '-L /{S*/,}L*/StartupItems -type f -exec file {} +' '-L /S*/L*/{C*/Sec*A,E}* {/,}L*/{A*d,Ca*/*/Ex,Compon,Ex,Inter,iTu,Keyb,Mail/B,Pr*P,Qu*T,Scripti,Sec,Servi,Spo,Widg}* -type f -name Info.plist' '/usr/lib -type f -name *.dylib' `awk "${s[31]}"<<<${p[23]}` "/e*/{auto,{cron,fs}tab,hosts,{[lp],sy}*.conf,pam.d/*,ssh{,d}_config,*.local} {,/usr/local}/etc/periodic/*/* /L*/P*{,/*}/com.a*.{Bo,sec*.ap}*t /S*/L*/Lau*/*t .launchd.conf" list getenv /Library/Preferences/com.apple.alf\ globalstate --proxy '-n get default' -I --dns -getdnsservers\ "${p[N5]}" -getinfo\ "${p[N5]}" -P -m\ / '' -n1 '-R -l1 -n1 -o prt -stats command,uid,prt' '--regexp --only-files --files com.apple.pkg.*|sort|uniq' -kl -l -s\ / '-R -l1 -n1 -o mem -stats command,uid,mem' '+c0 -i4TCP:0-1023' com.apple.dashboard\ layer-gadgets '-d /L*/Mana*/$USER&&echo On' '-app Safari WebKitDNSPrefetchingEnabled' "+c0 -l|awk '{print(\$1,\$3)}'|sort|uniq -c|sort -n|tail -1|awk '{print(\$2,\$3,\$1)}'" );N1=${#c2[@]};for j in {0..9};do c2[N1+j]=SP${p[j]}DataType;done;N2=${#c2[@]};for j in 0 1;do c2[N2+j]="-n ' syscall::'${p[33+j]}':return { @out[execname,uid]=sum(arg0) } tick-10sec { trunc(@out,1);exit(0);} '";done;l=(Restricted\ files Hidden\ apps 'Elapsed time (s)' POST Battery Safari\ extensions Bad\ plists 'High file counts' User Heat System\ load boot\ args FileVault Diagnostic\ reports Log 'Free space (MiB)' 'Swap (MiB)' Activity 'CPU per process' Login\ hook 'I/O per process' Mach\ ports kexts Daemons Agents launchd Startup\ items Admin\ access Root\ access Bundles dylibs Apps Font\ issues Inserted\ dylibs Firewall Proxies DNS TCP/IP Wi-Fi Profiles Root\ crontab User\ crontab 'Global login items' 'User login items' Spotlight Memory Listeners Widgets Parental\ Controls Prefetching SATA Descriptors );N3=${#l[@]};for i in 0 1 2;do l[N3+i]=${p[5+i]};done;N4=${#l[@]};for j in 0 1;do l[N4+j]="Current ${p[29+j]}stream data";done;A0() { id -G|grep -qw 80;v[1]=$?;((v[1]==0))&&sudo true;v[2]=$?;v[3]=`date +%s`;clear >&-;date '+Start time: %T %D%n';};for i in 0 1;do eval ' A'$((1+i))'() { v=` eval "${c1[$1]} ${c2[$2]}"|'${c1[30+i]}' "${s[$3]}" `;[[ "$v" ]];};A'$((3+i))'() { v=` while read i;do [[ "$i" ]]&&eval "${c1[$1]} ${c2[$2]}" \"$i\"|'${c1[30+i]}' "${s[$3]}";done<<<"${v[$4]}" `;[[ "$v" ]];};A'$((5+i))'() { v=` while read i;do '${c1[30+i]}' "${s[$1]}" "$i";done<<<"${v[$2]}" `;[[ "$v" ]];};';done;A7(){ v=$((`date +%s`-v[3]));};B2(){ v[$1]="$v";};for i in 0 1;do eval ' B'$i'() { v=;((v['$((i+1))']==0))||{ v=No;false;};};B'$((3+i))'() { v[$2]=`'${c1[30+i]}' "${s[$3]}"<<<"${v[$1]}"`;} ';done;B5(){ v[$1]="${v[$1]}"$'\n'"${v[$2]}";};B6() { v=` paste -d: <(printf "${v[$1]}") <(printf "${v[$2]}")|awk -F: ' {printf("'"${f[$3]}"'",$1,$2)} ' `;};B7(){ v=`grep -Fv "${v[$1]}"<<<"$v"`;};C0(){ [[ "$v" ]]&&echo "$v";};C1() { [[ "$v" ]]&&printf "${f[$1]}" "${l[$2]}" "$v";};C2() { v=`echo $v`;[[ "$v" != 0 ]]&&C1 0 $1;};C3() { v=`sed -E "$s"<<<"$v"`&&C1 1 $1;};for i in 1 2;do for j in 0 2 3;do eval D$i$j'(){ A'$i' $1 $2 $3; C'$j' $4;};';done;done;{ A0;D20 0 $((N1+1)) 2;D10 0 $N1 1;B0;C2 27;B0&&! B1&&C2 28;D12 15 37 25 8;A1 0 $((N1+2)) 3;C0;D13 0 $((N1+3)) 4 3;D23 0 $((N1+4)) 5 4;D13 0 $((N1+9)) 59 50;for i in 0 1 2;do D13 0 $((N1+5+i)) 6 $((N3+i));done;D13 1 10 7 9;D13 1 11 8 10;D22 2 12 9 11;D12 3 13 10 12;D23 4 19 44 13;D23 5 14 12 14;D22 6 36 13 15;D22 7 37 14 16;D23 8 15 38 17;D22 9 16 16 18;B1&&{ D22 35 49 61 51;D22 11 17 17 20;for i in 0 1;do D22 28 $((N2+i)) 45 $((N4+i));done;};D22 12 44 54 45;D22 12 39 15 21;A1 13 40 18;B2 4;B3 4 0 19;A3 14 6 32 0;B4 0 5 11;A1 17 41 20;B7 5;C3 22;B4 4 6 21;A3 14 7 32 6;B4 0 7 11;B3 4 0 22;A3 14 6 32 0;B4 0 8 11;B5 7 8;B1&&{ A2 19 26 23;B7 7;C3 23;};A2 18 26 23;B7 7;C3 24;A2 4 20 21;B7 6;B2 9;A4 14 7 52 9;B2 10;B6 9 10 4;C3 25;D13 4 21 24 26;B4 4 12 26;B3 4 13 27;A1 4 22 29;B7 12;B2 14;A4 14 6 52 14;B2 15;B6 14 15 4;B3 0 0 30;C3 29;A1 4 23 27;B7 13;C3 30;D13 24 24 32 31;D13 25 37 32 33;A2 23 18 28;B2 16;A2 16 25 33;B7 16;B3 0 0 34;B2 21;A6 47 21&&C0;B1&&{ D13 21 0 32 19;D13 10 42 32 40;D22 29 35 46 39;};D13 14 1 48 42;D12 34 43 53 44;D22 0 $((N1+8)) 51 32;D13 4 8 41 6;D12 26 28 35 34;D13 27 29 36 35;A2 27 32 39&&{ B2 19;A2 33 33 40;B2 20;B6 19 20 3;};C2 36;D23 33 34 42 37;B1&&D23 35 45 55 46;D23 32 31 43 38;D12 36 47 32 48;D13 20 42 32 41;D13 14 2 48 43;D13 4 5 32 1;D13 4 3 60 5;D12 26 48 49 49;B3 4 22 57;A1 26 46 56;B7 22;B3 0 0 58;C3 47;D22 4 4 50 0;D23 22 9 37 7;A7;C2 2;} 2>/dev/null|pbcopy;exit 2>&-
Copy the selected text to the Clipboard by pressing the key combination command-C.
8. Launch the built-in Terminal application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
Click anywhere in the Terminal window and paste by pressing command-V. The text you pasted should vanish immediately. If it doesn't, press the return key.
9. If you see an error message in the Terminal window such as "Syntax error" or "Event not found," enter
exec bash
and press return. Then paste the script again.
10. If you're logged in as an administrator, you'll be prompted for your login password. Nothing will be displayed when you type it. You will not see the usual dots in place of typed characters. Make sure caps lock is off. Type carefully and then press return. You may get a one-time warning to be careful. If you make three failed attempts to enter the password, the test will run anyway, but it will produce less information. In most cases, the difference is not important. If you don't know the password, or if you prefer not to enter it, press the key combination control-C or just press return three times at the password prompt. Again, the script will still run.
If you're not logged in as an administrator, you won't be prompted for a password. The test will still run. It just won't do anything that requires administrator privileges.
11. The test may take a few minutes to run, depending on how many files you have and the speed of the computer. A computer that's abnormally slow may take longer to run the test. While it's running, there will be nothing in the Terminal window and no indication of progress. Wait for the line
[Process completed]
to appear. If you don't see it within half an hour or so, the test probably won't complete in a reasonable time. In that case, close the Terminal window and report the results. No harm will be done.
12. When the test is complete, quit Terminal. The results will have been copied to the Clipboard automatically. They are not shown in the Terminal window. Please don't copy anything from there. All you have to do is start a reply to this comment and then paste by pressing command-V again.
At the top of the results, there will be a line that begins with the words "Start Time." If you don't see that, but instead see a mass of gibberish, you didn't wait for the "Process completed" message to appear in the Terminal window. Please wait for it and try again.
If any private information, such as your name or email address, appears in the results, anonymize it before posting. Usually that won't be necessary.
13. When you post the results, you might see an error message on the web page: "You have included content in your post that is not permitted," or "You are not authorized to post." That's a bug in the forum software. Please post the test results on Pastebin, then post a link here to the page you created.
14. This is a public forum, and others may give you advice based on the results of the test. They speak only for themselves, and I don't necessarily agree with them.
Copyright © 2014 by Linc Davis. As the sole author of this work, I reserve all rights to it except as provided in the Use Agreement for the Apple Support Communities website ("ASC"). Readers of ASC may copy it for their own personal use. Neither the whole nor any part may be redistributed.

Display Profile No Longer recognized in Final Cut Pro After Mavericks Upgrade

I have a 27" 3.4 GHz I7 imac. and an Apple 30" Cinema Display After the Mavericks upgrade my viewer window suddenly has completely crushed blacks and is extremely dark. Projects previously exported out look perfect in both Quicktime and Preview. I can export a project and it looks fine, just terrible in FCP. It seems that it is related to my calibrated display profiles. FCP will not recognize them now under Mavericks and worked fine with Lion. Switching to the generic imac or cinema display profile will hold after the change and make the viewer look normal. I downloaded FCP 10.1 didn't fix it. Any ideas why this is happening now?

After researching this quite a bit and seeing this Very very dark video in FCP X viewer. I was able to fix the problem by building a matrix based profile. This problem dated back to the first FCP release for some, but I never experienced it until updating to Mavericks. It seems that Mavericks is the problem, since nothing changed with FCP. I read somewhere else that another color calibration software tool was having an issue that Maverick's broke LUT (Look Up Table's} I'm surprised that I am not seeing more photographer's/videographers with this issue. It may just be that those that are using calibration don't have softaware that builds LUT profiles by default.

Display profiles and soft proofing Windows RGB / Monitor RGB

This might have asked before, but I did not find any definite answer for this. Sorry this gets a bit long.
Short question:
What's the difference between softproofing with Windows RGB and Monitor RGB targets? I see differences in my image between these targets.
Long question(s):
Here's some reasoning.. let me know when I go wrong.
I have hardware calibrated my display Spyder 3 elite to sRGB standard. I have understood that the generated display profile contains a LUT table that affects gamma values for each RGB component, so that affects both gamma and color temperature. That table is loaded into video card when Windows starts. In addition to the LUT table, the display profile contains what? Probably information on what color space the display has been calibrated to. Does that matches directly with the LUT table information, but may deviate from sRGB in the case my monitor cannot reproduce sRGB 100%?
Now if I have image that that is in sRGB, but the embedded sRGB profile has been stripped away, should any non color management aware image viewer show the colors properly, if it is assumed that 1) my monitor can handle full sRGB space and 2) my monitor was succesfully calibrated to sRGB and the LUT table has been loaded into video card?
Or does it still require a color management aware program to show the image, which implies that the LUT table information alone is not enough and the display profile contains some extra information that is needed to show the image correctly? I would think this is true, as I needed to turn on color management in Canon Zoom Browser to see images in it the same way as in Photoshop.
Now to the original question, what's the difference in Photoshop when soft proofing with Windows RGB and Monitor RGB targets
I read from www.gballard.net that
Photoshop can effectively "SoftProof" our web browser color:
Photoshop: View> Proof SetUp> Windows RGB
Photoshop's Soft Proof screen preview here simulates how unmanaged applications, web browsers, will display the file on 2.2 gamma monitors, based on the sRGB profile. If the file is based on sRGB and our monitor gamma is 2.2 and D/65 6500 degrees Kelvin, we should see very little shift here, which is the goal.
Photoshop: View> Proof SetUp> Monitor RGB
THIS IS WHERE the color-brightness-saturation problem will repeat consistantly.
Soft Proofing Monitor RGB here strips-ignores the embedded ICC profile and Assigns-Assumes-Applies the Monitor profile or color space.
The color and density changes seen here show the difference between the monitor profile and the source profile sRGB.
I'm not sure how to read that. Assume here that my monitor has been calibrated to sRGB and the PS working space sRGB. Do in both cases photoshop strip away color profile from the image at first? What happens after that? Does in Windows RGB case Photoshop pass the color values as they are to display? What does it do in "Monitor RGB" case then? Does it assign my monitor profile to the image? If it does, does there also happen conversion from one color space to another? In either one conversion there must happen as the soft proofing results are different. Does either one cause "double profiling" to the image as the monitor is already calibrated?
Thanks

Windows defaults to sRGB if you don't calibrate your monitor so untagged sRGB files should display (more or less) correctly in applications that don't know about color management on systems with uncalibrated monitors.
When proofing against Windows RGB you're proofing against sRGB, it will show you how applications that don't know about color management on an uncalibrated monitor will show the image. This is what you proof against if you want to see how the image will display in web browsers.
When you proof against Monitor RGB, Photoshop will assign your monitor's icc profile to the image which tends to be utterly useless most of the time.

Memory Leak in Preview.app when switching Display Profiles

I found a weird memory leak in Max OS X Preview.app, which manifests itself when Display profiles (color calbration) is change. I wonder if anyone else can reproduce my experience.
1. Open up "System Preferences" -> "Displays", switch to the "Color" tab. You'll need at least 2 available profiles in the list. (If you only have 1, you can create another using "Calibrate..." button to launch Display Calibration Assistant.
2. Open an image file in Preview.app. The larger, the better. Zoom in full size to maximize the effect of the bug. I repro'ed easily with this image: http://www.donporter.net/NewSchool/Color/Examples/Printer%20Test%20file.jpg
3. Open up "Activity Monitor.app", and click on Preview to highlight it, so you can watch its memory usage.
4. Switch back to "Diplays" Preference Pane. Using the arrow keys, toggle up and down between two different Display profiles.
4a. At the same time, watch Preview's "Real Mem" in Activity Monitor, as well as the total "Active" memory.
5. Each time you switch profiles, Preview consumes more Active/Real memory, about 25MB per switch in my case. This continues until all physical memory is consumed, and then (I presume) starts swapping virtual memory to disk.
6. Bring Preview to foreground, and all the profile-induced memory usage is freed.
Weird, wild stuff.

Could it be possible that this is just the OS holding the memory for the app until another process requires it? Do you find that the memory increase eventually causes the app to become unstable?
It might be best to open a new bug report on this over at bugbase.adobe.com. When adding the bug, please include any source code, project or installer that will help us reproduce the issue internally. If you'd like to keep your code private, feel free to email it directly to [email protected] Once entered, please post back with the URL so that others effected can add their comments and votes.
Thanks,
Chris

Color display profile

I have noticed that the colors on my Air and IMac differ substanitally.
My Air (and my wife's Macbook Pro) have a default color profile called "Color LCD"
My Imac's profile is called "IMac"
The colors running Color LCD are more red. This is especially noticeable on the Air. If I change the profile to sRGB on the Air then the colors more approximate the IMac colors but not exactly.
My question is whether or not the default settings in different Apple monitors should yield such different results. I use Aperture on my Imac to edit colors on phots and videos. I have nowe chenged my Air to sRGB and the colors are closer although the whites on the Air now have a blusih tint. If I share my photos around to others, will the reddishness that is a problem on my Air also be on most other standard display profile settings?
Thanks

For me and my 17" iMac "Adobe RGB (1998)" from the preinstalled profiles has the richest color. Here is a great link to help you calibrate and set new profiles:
http://www.computer-darkroom.com/colorsync-display/colorsync_1.htm
17" iMac Intel Core Duo 1.5GB Ram Mac OS X (10.4.9) Maxtor 300GB FireWire Creative Inspire 2.1 2G Nano

X230 display brightness changes automatically

Hi,
I have a problem when I'm using my X230 from battery: every know and then the display brightness changes, it gets lower (even without any user activity). Also it seems that the color profile also changes, colors look washed out. After few minutes or sometimes seconds, it goes back to normal. However, I have this issue quite often.
Is there a solution? Is it something to do with my power settings?
Thank you.
Solved!
Go to Solution.

zombyorc,
Try the following.
http://forums.lenovo.com/t5/W-Series-ThinkPad-Laptops/Disabling-Auto-Screen-brightness-on-Intel-HD-G...
or
http://forums.lenovo.com/t5/T400-T500-and-newer-T-series/T410-screen-brightness-dims-washes-out-on-b...
*Non Lenovo employee*
I have a Y2P (i5) ... Feel free to ping me if you want me to test some applications with your Y2P if you have the same model. I don't mind keep doing recovery on it if needed .... =)

Is there a terminal command than can run to turn off all display profiles?

The color display profiles are influencing/altering the RGB values that I am getting back from the apple color picker. Is there a way that I can toggle them all on and off?
I am trying to use the color picker in FileMaker Pro 11 to sample colors from a photo that I am using as a background template. When I sample a color the color picker does not return the correct values. It keeps returning a darker value than it should. It's driving me nuts.
I tried manually entering specific RGB values but the actual numbers don't stick, they changes when I close and reopen the object that I am applying the color to.

The following will list the System frameworks but not necessarily every framework that you have installed by some third party application.
system_profiler SPFrameworksDataType

Issue with Display Profiles

Hi eb,
I have a problem with Display profiles. When 2 users are log in, my display profil switch to "Generic RGB" and I cannot change it to any other profil.
When I restart and log in one user - everything is ok. When I log in second user display profile set to Generic RGB and issue start. When I log out one of them situation is same and issue persist.
I tryed run Color Sync Utility > Profile First Aid , but no problems found.
Had anybody same issue?
THX for ur help.

Found a temporary solution! Here's the article: http://www.macworld.com/weblogs/macosxhints/2006/02/fuscolor/index.php
Thanks to Niel from the thread at http://discussions.apple.com/thread.jspa?messageID=4776564&#4776564
Hopefully the long-term fix is on it's way...
Good luck!

Iphoto does not use the proper display profile

Hello.
I just bought a 20' Apple Cinema display and connected it to my Macbook. I have noticed a very strange behavior of iPhoto and Preview.
I will first describe the expected (right behaviour).
When I drag an image opened in Adobe LG or Aperture from the Macbook display to the Cinema display (or the opposite) after a very small delay the color of the image adapts to the color profile of the display where it was dragged. Which is the correct the behavior.
With Preview or iPhoto this adaptation does not happen and the image is displayed with the right profile only on one of the 2 display. Besides being a very annoying issue, the very strange thing is how you can choose on which one of the displays the image gets displayed with the right display color profile:
- With Preview, the display color profile used (for both displays) is selected based on which is the default display in ColorSync display settings.
- With iPhoto, the display color profile used (for both displays) is selected based on which display the munu bar is (!!!). That is, if you want to have your image displayed with the right display profile on your cinema display, then you MUST have the menu bar on that display. If the menu bar is on the Macbook display the image on the cinema display will be displayed with the display profile of the Macbook display. Crazy!
You can try all of the above remembering that after any change you need to quit and reopen iphoto or preview or ColorSync for the settings to apply.
My question is: why neither iPhoto nor Preview act in the right way like Aperture or Adobe LG? Or at least, why iPhoto does not behave like Preview allowing me to choose where I want the menu bar without having this choice affecting the display color profile used to display my images?
Thank you,
Marco

Welcome to the Apple Discussions.
why iPhoto does not behave like Preview allowing me to choose where I want the menu bar without having this choice affecting the display color profile used to display my images?
Make a feature request at http://www.apple.com/feedback/iphoto.html
TIP: For insurance against the iPhoto database corruption that many users have experienced I recommend making a backup copy of the Library6.iPhoto (iPhoto.Library for iPhoto 5 and earlier) database file and keep it current. If problems crop up where iPhoto suddenly can't see any photos or thinks there are no photos in the library, replacing the working Library6.iPhoto file with the backup will often get the library back. By keeping it current I mean backup after each import and/or any serious editing or work on books, slideshows, calendars, cards, etc. That insures that if a problem pops up and you do need to replace the database file, you'll retain all those efforts. It doesn't take long to make the backup and it's good insurance.
I've created an Automator workflow application (requires Tiger), iPhoto dB File Backup, that will copy the selected Library6.iPhoto file from your iPhoto Library folder to the Pictures folder, replacing any previous version of it. It's compatible with iPhoto 6 and 7 libraries and Tiger and Leopard. iPhoto does not have to be closed to run the application, just idle. You can download it at Toad's Cellar. Be sure to read the Read Me pdf file.

How to track mrp profile change

Hi,
Is there any possibilities to track who has done the MRP profile change.In mm02 its not in editable mode.when i check in MM04 for the particular material its showing lot many changes.so i couldnt figure out who has done. i want who has done the changes in the particular field mrp type ?

Hi ,
Goto MM02 -Enter Material -Environment - Display Changes - Here ,You will get list of changes in transaction with time , user id .
Now if you select the check box and hit magnifying glass symbol , it will take you to the changes done by certain user .
For MRP profile :
In the Material Master menu, choose Profile ® MRP profile ® Usage.
The selection screen appears.
Enter the name of the profile. You can also enter a plant and MRP controller to restrict the selection. Then choose Execute.
A list is displayed of the material master records in which the MRP profile is used. You now have the following options:
You can display or change the MRP profile by choosing Display profile or Change profile respectively.
You can display or change a particular material master record in which the MRP profile is used by choosing Display material or Change material respectively. In the material master for industry, the MRP view on the material master record appears, from which you can access the other views. In the article master for retail, the Display or Change Article: Initial Screen appears.
Try and revert
Regards
JH

Display profiles changing randomly

Similar Messages

Maybe you are looking for