Display Properties

Using a laptop and running on Windows XP. Frequently, when booting up, the screen resolution is 1024 X 768 and display is distorted. When I go to settings in display properties, I cannot increase the display to 1280 X 800. Rebooting sometimes helps, but the next time I turn it on, the setting reverts to 1024 X 768. How do I correct this?

have you installed all the drivers?
T400s - 2815RW1 + Win7 Ultimate
Don't pm me for help! That's what the forum is for. Also, Google's nicer than me. Ask him.

Similar Messages

How to display properties of dimension on the input form and report in bpc

Dear Expert,
Please tell me how to display properties of dimension on the input form and report in bpc. I can only display dimension number.
thanks so much
hungth

Hi Hungh,
If your are using BPC 10 with EPM add in client, you can use the function:
EPMDimensionProperty ()
This function retrieves the properties of a specified dimension in a specified cell range.
Thanks, Safa

Can't change displayed properties in resource renderer

Hello everybody!
I'm trying to do display a very simple list of filenames in a KM navigation iView. I've assigned a layout set, which references a collection renderer and a resource renderer. In the resource renderer, "Visible Properties" is set to rnd:displayname(contentlink).
But still I get a list with filename, file size and timestamp. No matter what I put in the "Visible Properties" field, the same thing is displayed.
I've verified that the layout set references the correct resource renderer by changing other attributes ("Command Display", for instance), and these changes do have an effect.
Any ideas what might be the problem here?
One more thing. This iView is a dynamic navigation iView. How can I make the documents open in the content area of the portal instead of in a new window?
Any help is very much appreciated.
-martin

Hi Martin,
seems like you have selected a collection renderer for "structured output", like the grid or tree collection renderer. In this case the collection renderer is the one who is responsible of the properties displayed.
So what you have to do is edit the parameter "Displayed Properties" of your collection renderer with the properties you want to display.
Check this <a href="https://forums.sdn.sap.com/thread.jspa?threadID=28751">link</a> for more info about "unstructured vs. structure coll. renderers".
Hope this helps,
Robert
PS: The iView Property "Launch in New Window" should be set to "Display in Portal Content Area", in order have the iView displayed as you wish.

How to set up display properties for a crosstab is CSS?

I am woundring how to setup css class and code like in this tutorial.
myalerting.css ?
Set up display properties for a crosstab: Design Studio 1.2 - YouTube.
Design Studio 1.2: Set up display properties for a crosstab
if you have sample file please share I am sure other can be befits from as well.
I would like to use color display on numbers or icons in seperate column if the value in certain range or a value is below or avove business needs.
Thanks.

Kevin,
I could not get this to work on my installation; perhaps you can review and "run with it" or someone better with CSS can assist.
The gist of it is there is a class .sapzencrosstab-DataCellDefault.sapzencrosstab-DataCellAlert1Background to define the status symbol for the alerts
Based on your Exceptions in the BEx query, Good 1 is .sapzencrosstab-DataCellDefault.sapzencrosstab-DataCellAlert1Background
Good 2 is .sapzencrosstab-DataCellDefault.sapzencrosstab-DataCellAlert3Background
etc... Bad 3 (red symbol) is .sapzencrosstab-DataCellDefault.sapzencrosstab-DataCellAlert9Background
I tried the following custom CSS on the crosstab, note using IE (which now we can no longer use until Microsoft patches)
myAlerting.sapzencrosstab-DataCellDefault.sapzencrosstab-DataCellAlternating{
background-color:#F9F9F9 !important;
myAlerting.sapzencrosstab-DataCellDefault{
background-color:#FFFFFF !important;
myAlerting.sapzencrosstab-DataCellDefault.sapzencrosstab-DataCellAlert1Background
color:rgba(0,0,0,0.0);
background-image: url('/aad/resources/~1398612272195~/sap/zen/crosstab/themes/sap_platinum/img/exceptions/status_1.gif') !important;
background-repeat:no-repeat !important;
background-position:center top !important;
myAlerting.sapzencrosstab-DataCellDefault.sapzencrosstab-DataCellAlert2Background
color:rgba(0,0,0,0.0);
background-image: url('/aad/resources/~1398612272195~/sap/zen/crosstab/themes/sap_platinum/img/exceptions/status_2.gif') !important;
background-repeat:no-repeat !important;
background-position:center top !important;
myAlerting.sapzencrosstab-DataCellDefault.sapzencrosstab-DataCellAlert3Background
color:rgba(0,0,0,0.0);
background-image:url('green.png');
background-repeat:no-repeat !important;
background-position:center top !important;
myAlerting.sapzencrosstab-DataCellDefault.sapzencrosstab-DataCellAlert9StatusSymbol
color:rgba(0,0,0,0.0);
background-image: url('aad/resources/~1398612272195~/sap/zen/crosstab/themes/sap_platinum/img/exceptions/status_9.gif') !important;
background-repeat:no-repeat !important;
background-position:center top !important;
I didn't want to hold you up and for sure I hope there is someone in the community who could help. I'll try again when we can use IE

Cannot set resolution with gnome-display-properties

Hey all!
After full system update my external display does not get detected/recognized properly by gnome-display-properties
Though before upgrade it worked just fine!
Tried to downgrade hal and xorg-server but without any success.
Any ideas how to fix?
Thanks!

I have the same problem. I do, like You, own a ASUS P4S8X motherboard and a MSI (Ti4800SE-VTD8X(MS-8900))videocard.
Because it was a brand new system i installed everything from scratch, so installed the MSI drivers for the videocard. Afterwards i thought i that it would be better to download the latest nvidia drivers. Since that time i have the same problem with the property settings of the videocard, Ghost Recon (original and supplied version) does not work anymore as goes for liveupdate of msi.
There is a solution but i think it is CRAP. You have to uninstall nvidia drivers and reinstall the original msi drivers.... bla bla bla... Why is it that there are a lot of known errors with msi/nvidia drivers in conjuntion with the liveupdate, supplied games and with the settings?? I would like to see a (driver)update from msi which is for mortals. I'm not the hacking and phreaking guy, and so are more. I have spent a fortune on this card so MSI get started!!!!!!

Displayed Properties in Collection List Renderer are not displayed

Hello All,
I have created one custom property and entered the value for a resource which had that property.
Now, when I am trying to display the custom property in any layout, its not coming, even though I have added the property name in the Displayed Property of the collection list renderer.
To check the view is taking the correct layout or not, i changed some other settings of the collection list renderer and the changes are immediately getting reflected. What could be the problem here?
Any help, deeply appreciated
Regards
BP

Hello Bobu,
Are you using a different Namespace Alias other than 'Default' in your property definition? If so then you need to specify the property in the 'Displayed Properties' parameter of the collection renderer as <NamespaceAlias>:<propetrty ID>, e.g. rnd:displayname.
Other than that you should check the 'Folder Validity Patterns' and 'Document Validity Patterns' to make sure they are valid for the content on which you are trying to display this property, you may have already checked this.
Regards,
Lorcan.

Rnd:action in displayed properties of resource renderer to open a webdynpro

Hi,
In the collection renderers of the SAP KMC, we define the displayed properties as below.
rnd:iconrnd:displayname(contentlink)rnd:action
Which means that the displayname of the resource is shown as hyperlink and we click on it the resource opens in the respective editor.
I have an requirement when I click on the hyperlink of the display name I want to open a webdypro application. How can this be achieved.
Any inputs will be of great help.
Regards,
Sreeram

Hi,
Firstly thanks for your quick reply. My requirement is , I have some images in a folder in KM of portal for example : /document/IMAP. If I click on this file , it should invoke a webdynpro application. I have follwed ur blog and created a oth file and uploded in /etc/oth folder. After doing this I thought when I click on any file in /documents/IMAP folder the webdynpro application will open but its not happening.
my oth file is as below
<?xml version="1.0"?>
<ObjectTypeHandler Name="IMAPOTH" Class="com.sapportals.wcm.service.objecttypehandler.GenericObjectTypeHandler">
<SelectionCriteria>
<Paths>
<Path>/documents/IMAP/**</Path>
</Paths>
</SelectionCriteria>
<Actions>
<Action>
<ActionType Type="view" Namespace="http://sapportals.com/xmlns/cm"/>
<ActionURL URL="/webdynpro/dispatcher/local/DropDownApp/DropDownApp?Resource=<resource.uri>"/>
</Action>
</Actions>
</ObjectTypeHandler>
Regards,
Sreeram

Missing Display Properties

Hi,
Not sure how but all the tabs, except background, are missing on my Display Properties in XP Pro. I've checked in regedit and all have 0 as Value Data and I am logged on as Administrator and not on a network. The strange thing is they are all showing perfectly when I boot in SAFE mode - any ideas greatly appreciated.

Spyghost,
Set your desktop resolution to 16Bit and remove any files you have on your desktop.
No need for you to keep rendoring your desktop in the background while playing a game.
Then in the settings I would do these tweaks:
Performance & Quality Settings
Performance - Aggressive
Antiailiacing - Off
Anisotropic Filters - Off
Direct3D Settings
Enable Fog Table Emulation - On
Mipmap Detail Level - Best Performance
More Direct3D
Vertical Sync Mode - Always Off
Render no more than - 5 Frames Ahead
OpenGL Settings
Default Color Depth - Use Desktop Color Depth
Buffer-Flipping Mode - Auto-Select
Vertical Sync - Off by Default
As for the overclocking section, you can use it at your own risk. For now run without overclocking.
Take Care,
Richard

Display Properties (Qosmio G10)

Hi,
Basically, I tried to show my parents on their TV photos from uni(Qosmio G10 - WIn MCE 2005). And it worked! Then, because I thought the resolution was too fine, I decided to tinker about with the settings in Display Properties as well as the GeForce FX Go5700 utility to change it and got carried away changing settings. After I pressed some button or another, the image on the TV vanished. I can't seem to get it back.
Anyway to reset or default Display Properties and/ or the GeForce utility - at least this will aloow me to continue to use my laptop for other presentation needs esp. at uni.
Thanks a lot,
WB

Yes, while the Qomsio is running, press Fn + F5 until you get a picture back on its internal screen.
Later,
Alcahest

System-config-display, gnome-display-properties - inconsistent R5 U5 64bit

Hi all,
I have OEL Rel 5 U5 (64-bit) installed and running on an IBM x3200 which has Radeon integrated graphics, with a IBM ThinkVision LCD monitor (1280x1024 max)
Problem I have is eventhough system-config-display lets me select 1280x1024 I can't actually get it to switch. Upon log-off/log-in, reboot, restart, etc... it still returns to 1024x768 mode.
Running gnome-display-properties only gives me a choice of 1024x768, 800x600, or 640x480.
I've also tried xrandr and trying to force it to 1280x1024 but it tells me I only have the 3 choices given by gnome-display-properties.
My xorg.conf file is configured with 1280x1024, 1024x768, and 800x600 modes, so I'm baffled at where gnome-display-properties and xrandr are getting their mode choices...
Can anyone shed some light on this?

Based on Xorg log I'm guessing the monitor driver just will not support the higher res and apparently that's where 'gnome-display-properties' gets its info regardless of what I try in Xorg.conf.
I'll see if I can manipulate the monitor settings and see where that gets me...
I see the following in the log:
(II) RADEON(0): Monitor1 EDID data ---------------------------
(II) RADEON(0): Manufacturer: IBM Model: 29a Serial#: 16843009
(II) RADEON(0): Year: 2003 Week: 16
(II) RADEON(0): EDID Version: 1.3
(II) RADEON(0): Digital Display Input
(II) RADEON(0): Max Image Size [cm]: horiz.: 30 vert.: 23
(II) RADEON(0): Gamma: 1.00
(II) RADEON(0): No DPMS capabilities specified
(II) RADEON(0): Supported color encodings: RGB 4:4:4 YCrCb 4:4:4
(II) RADEON(0): Default color space is primary color space
(II) RADEON(0): First detailed timing is preferred mode
(II) RADEON(0): redX: 0.640 redY: 0.330 greenX: 0.300 greenY: 0.600
(II) RADEON(0): blueX: 0.150 blueY: 0.060 whiteX: 0.312 whiteY: 0.329
(II) RADEON(0): Supported VESA Video Modes:
(II) RADEON(0): 720x400@70Hz
(II) RADEON(0): 640x480@60Hz
(II) RADEON(0): 640x480@72Hz
(II) RADEON(0): 640x480@75Hz
(II) RADEON(0): 800x600@56Hz
(II) RADEON(0): 800x600@60Hz
(II) RADEON(0): 800x600@72Hz
(II) RADEON(0): 800x600@75Hz
(II) RADEON(0): 1024x768@60Hz
(II) RADEON(0): 1024x768@70Hz
(II) RADEON(0): 1024x768@75Hz
(II) RADEON(0): Manufacturer's mask: 0
(II) RADEON(0): Supported Future Video Modes:
(II) RADEON(0): #0: hsize: 1024 vsize 768 refresh: 60 vid: 16481
(II) RADEON(0): Supported additional Video Mode:
(II) RADEON(0): clock: 65.0 MHz Image Size: 300 x 225 mm
(II) RADEON(0): h_active: 1024 h_sync: 1048 h_sync_end 1184 h_blank_end 1344 h_border: 0
(II) RADEON(0): v_active: 768 v_sync: 771 v_sync_end 777 v_blanking: 806 v_border: 0
(II) RADEON(0): Serial No: Reserved
(II) RADEON(0): Monitor name: IBM RSA2
(II) RADEON(0): Ranges: V min: 50 V max: 160 Hz, H min: 30 H max: 70 kHz, PixClock max 110 MHz
(WW) RADEON(0): Failed to detect secondary monitor, MergedFB/Clone mode disabled
(==) RADEON(0): Using gamma correction (1.0, 1.0, 1.0)
(II) RADEON(0): Validating modes on Primary head ---------
(II) RADEON(0): DFP table revision: 3
(II) RADEON(0): Panel infos found from DDC detailed: 1024x768
(II) RADEON(0): Valid Mode from Detailed timing table: 1024x768
(II) RADEON(0): Valid Mode from standard timing table: 1024x768
(II) RADEON(0): Valid Mode from established timing table: 1024x768
(II) RADEON(0): Valid Mode from established timing table: 1024x768
(II) RADEON(0): Valid Mode from established timing table: 1024x768
(II) RADEON(0): Valid Mode from established timing table: 800x600
(II) RADEON(0): Valid Mode from established timing table: 800x600
(II) RADEON(0): Valid Mode from established timing table: 800x600
(II) RADEON(0): Valid Mode from established timing table: 800x600
(II) RADEON(0): Valid Mode from established timing table: 640x480
(II) RADEON(0): Valid Mode from established timing table: 640x480
(II) RADEON(0): Valid Mode from established timing table: 640x480
(II) RADEON(0): Total of 12 mode(s) found.
Here's video info from lspci:
0a:04.0 VGA compatible controller: ATI Technologies Inc ES1000 (rev 02) (prog-if 00 [VGA controller])
     Subsystem: IBM Unknown device 0325
     Flags: bus master, stepping, fast Back2Back, medium devsel, latency 66, IRQ 11
     Memory at d8000000 (32-bit, prefetchable) [size=128M]
     I/O ports at 6000 [size=256]
     Memory at d0800000 (32-bit, non-prefetchable) [size=64K]
     [virtual] Expansion ROM at d0820000 [disabled] [size=128K]
     Capabilities: [50] Power Management version 2
Xorg.conf:
# Xorg configuration created by system-config-display
Section "ServerLayout"
     Identifier "single head configuration"
     Screen 0 "Screen0" 0 0
     InputDevice "Keyboard0" "CoreKeyboard"
EndSection
Section "InputDevice"
     Identifier "Keyboard0"
     Driver "kbd"
     Option     "XkbModel" "pc105"
     Option     "XkbLayout" "us"
EndSection
Section "Monitor"
### Comment all HorizSync and VertSync values to use DDC:
### Comment all HorizSync and VertSync values to use DDC:
     Identifier "Monitor0"
     ModelName "LCD Panel 1280x1024"
### Comment all HorizSync and VertSync values to use DDC:
     HorizSync 31.5 - 64.0
     VertRefresh 56.0 - 65.0
     Option     "dpms"
EndSection
Section "Device"
     Identifier "Videocard0"
     Driver "radeon"
     Option     "AccelMethod" "UXA"
EndSection
Section "Screen"
     Identifier "Screen0"
     Device "Videocard0"
     Monitor "Monitor0"
     DefaultDepth 16
     SubSection "Display"
          Viewport 0 0
          Depth 24
          Modes "1280x1024" "1024x768" "800x600"
     EndSubSection
     SubSection "Display"
          Viewport 0 0
          Depth 16
          Modes "1280x1024" "1024x768" "800x600"
     EndSubSection
EndSection

How to access the Document Options dialog box to select display properties?

How to access the Document Options dialog box to select display properties (e.g. smartcut ) for a selected document to
be viewed in the Workspace.
regards

Preferences --> General --> Reset all warnings.
Mylenium

NS 9 and Text Display Properties (AFC)

Text Display Properties not working in newScale 9
Has anyone tested the newScale 9 in dev yet? We have an issue where the display properties of a text field is not taking effect when configuring the column length. It will just remain the default length no matter what the value is set at. We have exported the service from nS 9 back to 2008.3 and the text display changes work as expected. Is there a work around for this or is this a known bug?

Hi Craig,
Good news -- there is a hotfix for this already available. If you are going to be installing SP1 for newScale 9, the hotfix is included in the service pack. If you are not planning to install SP1, please contact customer care and ask them for 2009.1_HotFix_FormDataTypeTransform.

Additonal VGA monitor showing in Display properties.

I have a problem, I am currently running Window 7 Pro 64 and when i restarted my laptop it now has an additional monitor showing in the display properties. I do not have an external VGA monitor connected to it, and I have tried to remove the
display adapters in hopes of remove the additional mystery monitor, but after removal of the display adapter drivers and a reboot the extra monitor comes back. Can anyone help?

Hi,
According to your description, the hardware driver is also related to the BIOS of your computer, to confirm this, try to start the computer in safe mode in the way below:
Safe mode starts Windows with a limited set of files and drivers
Remove all floppy disks, CDs, and DVDs from your computer, and then restart your computer.
Click the Start button Picture of Start button, click the arrow next to the Shut Down button Picture of Shut Down button, and then click Restart.
Do one of the following:
Restart your computer, press and hold the F8 key. You need to press F8 before the Windows logo appears.
On the Advanced Boot Options screen, use the arrow keys to highlight the safe mode option you want, and then press Enter.
Log on to your computer with a user account that has administrator rights.
You can refer to this for more details:
http://windows.microsoft.com/en-us/windows/start-computer-safe-mode#start-computer-safe-mode=windows-7
If this works for you, the BIOS should be upgraded, go to the official site to upgrade the BIOS accordingly.
Regards
Wade Liu
TechNet Community Support

MSI tabs in Display properties

whenever i try to use the msi tabs in the display properties i get this error
Run a DLL as an App has encountered a problem and needs to close.
and when i click on the button to see what data the error report contains i get this information
AppName: rundll32.exe AppVer: 5.1.2600.0 ModName: msicpl.dll
ModVer: 1.0.0.1 Offset: 00004261
I am running winxp and have re-installed it a few times to see if that would fix the problem, then i tried taking the card out and putting it back in, but no luck either, I have the newest drivers as well and nothing works,
any idea anyone???

Hi guys,
I posted something about this exact problem...
Hi everyone...
I just bought an MSI GF4 TI-4200 128 and have the same problem. Running XPPro, fresh install. I was running MSI GF3 TI-200 64 before with same OS and had no problems with either the properties and the MSI Live Update 2. Now, when I try and access the MSI properties in the Display properties, I get that same error (see at beginning of thread) and the window will close. When I try and use the MSI Auto Update, I get the vbios.dll could not be loaded or found... (or something similar) and can't use the Update. I "bypassed" the problem by loading the NVIDIA drivers instead of the MSI ones and it works like a charm now...
I am pretty sure that the MSI drivers would have worked anyhow but I have'nt tried them. BTW, I can access the NVIDIA properties no problem!
I will also send a request to MSI to let them know that I am now aware of this "known" problem and am awaiting a fix for this... I will also check with ASUS for a motherboard compatibility issue.
XPPRO fully patched
MoBo Asus P4B-533 (latest bios, 1007 I think)
512 DDR-2100
Sound Blaster 128
Maxtor 40gigs 7200
Intel P4 1.7
PS 300W Antec
etc...etc...
To Moderators: Is there a fix for this and if not, could you let me know (by link, email or post) what could be the problem (i.e.: ASUS moBo.)? I am quite content on using NVIDIA drivers but still, my inquisitive nature is acting up...
I haven't tried yet but will I be able to Flash my VGA bios if I have that problem? (is this VGA card related or a compatibility issue with something else?)

Change the displayed properties of the StandardSearchResultRender

Hey,
I would like to change the displayed properties in the StandardSearchResultRender of the SearchResultSet
(SearchResultLayoutSet --> StandardSearchResultRenderer --> Displayed Properties).
I need a new Link such as Displayed Name of a document (rnd:displayname(contentLink/[1;2-3]/alignTop/space-right=30)).
For this i made two new properties witch called "newdisplayname" and "newlink". In the StandardSearchResultRendere I added the line "rnd:newdisplayname(newlink/[5;2-3]/alignTop/space-right=30)" in the displayed properties. When I apply my changes the Portal shows me an error (The current configurable is invalid ). I don't know why it's invalid.
Can anybody help me? How can I made a new link with an reference? Thanks.

Hi Misel,
> Is it right, that I can create my own modifier, if I modificate the code?
In general, yes, but one should have heavy experience if starting to modify SAP code.
> If yes, where must I modifie the code
There are different classes, one example would be com.sapportals.wcm.rendering.resource.cm.ResourceRenderer (that is almost supported to "modify", at least it is supported to create your own ResourceRenderer)
> Is ther anywhere an example, or an document ore something else?
No, absolutely not. This is really deep-digging into foreign code which in general is not supported at all by SAP.
> Or is there an other option to show a link with an other caption?
The easier way would be to create a property renderer and to implement that or the resource renderer by yourself; this also is officially supported: https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/com.sap.km.cm.docs/library/nw/NetweaverDevelopersGuide2004s/NetWeaverDevelopersGuide2004s_Documents/KM_articles_new/howto/km/flexui/Flexible%20UI%20Components.html
Hope it helps
Detlev

Display Properties

Similar Messages

Maybe you are looking for