Display Purchase Order Approval after Goods Receipt

Hi,
I would like to know if there is a way to view/display purchase order even though it was already received (Goods Receipt)? I would like to know who are the approvals of that particular purchase order, the units/quantities and the amount.
Thank you.

Hi Reno,
But if the PO was already received in full it will not be anymore available in the Approval Status Report.
Is the Approval Decision report available to Logistic personnel?
Regards,
Hi Demarillas,
If the document is approved and u want to check the details of who approved the PO and when, you can make use of the Approval Decision Report, located in Administration --> Approval Procedure --> Approval Decision Report . Also there is another report to check with the status of the documents sent for approval which is Approval Status Report .
Hope this helps.
Regards
Reno

Similar Messages

  • Lock Purchase Order fields after goods receipt

    Hello everyone,
      I need to be able to set a couple of fields in ME22N as display only after goods receipt has been done for the PO. Is there any config that I can do to get this done? Any idea or suggestion?
      Thank you very much for your help!
    Kelly.

    You can change PO after GR in standard SAP and there is no standard customization feature available to block that.
    Use ABAP to check for GR against the PO and block PO fields once GR is posted.
    Use tables MKPF for GR posting, EKKO and EKPO for Purchase Order.
    ABAP will have to change the field status of Purcahse Order screens as blocked, if GR is posted.
    It might be added as a subroutine that gets triggered after each GR posting.

  • How to change Purchase Order currency after Good receipt and Good issue?

    Hi,
    I've a PO created last year. The PO currency has been entered wrongly.
    My store colleague has been performed good received and consumed it.
    Now, I am not able to change PO currency to correct one, due to this message:-
    Currency can no longer be changed
    Message no. 06489
    Diagnosis
    As a basic rule, the currency cannot be changed if there has already been a goods receipt against a document.
    If the document contains external service and/or limit items, or if an invoicing plan has been assigned to an item, the currency cannot be changed following the receipt of an invoice either.
    If external service items exist, the currency also cannot be changed if services that have actually been performed have already been recorded or if the item in question has been assigned to a preventive maintenance (servicing) plan.
    Is there anyway to change PO currency after Good receipt and Good issue? Thanks !

    Diagnosis
    As a basic rule, the currency cannot be changed if there has already
    been a goods receipt against a document.
    If the document contains external service and/or limit items,
    or if an invoicing plan has been assigned to an item,
    the currency cannot be changed following the receipt of an invoice either.
    If external service items exist, the currency also cannot be changed if
    services that have actually been performed have already been recorded or
    if the item in question has been assigned to a preventive maintenance (servicing) plan.
    Answer in question itself,need to cancel all documents of wrong currency in order of LIFO,
    Create a new purchase order.

  • Report with open Purchase orders and open Goods Receipt (without invoices)

    Dear All,
    We require a report in purchasing which will show:
    1. open purchase orders
    2. open goods receipts
    We do not want POs and GRs that have been created into invoices to be included in the report.
    At the moment we tried ME2N with RECHNUNG in selection parameters but it includes invoices. We have tried other selection parameters and reports but the results are not helpful.
    I have also checked SDN but there is no correct answer. Most of them specify the ME2N with RECHNUNG as a solution but this does not work for us.
    Any help would be appreciated.
    G.

    Hi,
    Try ME2N, Select WE101....Also Select ALV
    go to next screen....Go to change layout
    Select to be deliverd(Qty) and Value, also to be invoice(Qty) & Value.
    Hope Help U!
    Regards,
    Pardeep Malik

  • Customisation settings for VC Configuration copy from Purchase order to GRN(Goods Receipt note)

    Hi Experts
    I was looking for Customisation settings for VC Configuration copy from Purchase order to GRN(Goods Receipt note),
    Please share.
    Regards
    Sandeep

    Hi Ritesh
    Thanks for your reply,
    I checked  both of these transaction  we need to select 3 option Characetrstics frm configuration(prio) and classification. I will check that, I had one more question
    In PO VC configuration is called for class type-300  and  in GRN VC configuration  is called for class type -023. How it will fetch the variant class configuration to Batch class configuration?
    Once we had faced some issues the copy from PO to GRN was happening for some batches & some batches it was not happening.
    yes we have activated Mill Functions in our ERP box.
    Regards
    Sandeep

  • Purchase orders pending of goods receipt.

    Hello,
    Is it possible to obtain the list of Purchase orders pending of Goods Receipt?
    I need to know the third party P.O pending of goods receipts.
    Is there any program?
    Thanks in advance,
    Ricard.

    Hi oscar
    You can list of Purchase orders pending of Goods Receipt by Tcode ME2N and select field
    Source of list - ALV
    Selection parameter - WE101
    As per your requirement Assign Plant and Compnay code.
    Just execute.
    it list list all po whose gr is pending
    Regards,
    Vraj

  • How to copy characteristic values from Purchase Order to MIGO Goods Receipt

    Dear all,
    I have a configurable material X,
    then i create a purchase order for that material and then i input characteristic value in the Purchase Order transaction and save it
    However when i do the Goods Receipt transaction via MIGO and using the Purchase Order number that i have created, after i entry the batch number and want to check the classification, the characteristic value are blank, so it is not copied from the Purchase Order
    I've tried guide from
    http://help.sap.com/saphelp_erp60_sp/helpdata/en/92/9b4a23a46411d6b28300508b5d5c51/content.htm
    but i do not find the configuration for copying rule
    Is there any one who can resolve this problem??
    Regards,
    Marufat

    Hi,
    You define the copying rules for a movement type in Customizing for Batch Management under Batch Valuation ,  Valuation for Goods Movement in Inventory Management , Activate Batch Classification for Goods Movements in IM. Please refer below link. Thanking you.
    http://help.sap.com/saphelp_me52/helpdata/EN/47/39867251500aa7e10000000a114a6b/content.htm

  • Goods-Receipt Block for Purchase Order depending on Goods-Receipt Date

    Hi,
    I want to set up the system so it can block the Goods-Receipt for Purchase Order respectively Scheduling Agreement if the Goods Receipt is about to take place 30 days or more before the Desired Delivery Date.
    For Example: If I have a Purchase Order with the desired delivery date 30.09.2008. I want to set up the system so, that it bans (forbids) the Goods Receipt before the 01.09.2008.
    If possible I would want to do that without additional programming. Is it possible to set up the system using only customising settings?
    Thanks for your help
    Bogdan

    Hello Marius-Bodgan,
    as this question is marked answered I assume you have received an solution for your requirement. Could you please share the solution with me by posting it here? I have the same requirement and did not find any possibility to do this in customizing.
    Thanks in advance,
    Emanuel
    Found the solution in thread Re: Goods Receipt
    Edited by: Emanuel Penalver on Jul 15, 2008 11:48 AM

  • How to Display Purchase Order Number IN G.R.P.O

    Hi Guys,
    i am unable to find solution regarding Getting Purchase order number and displaying in Goods Receipt P.O. Report automatically when we copy from purchase Order ie Copy From button .My problem is we are Expecting Purchase Order Number in Goods Receipt P.O automatically when they copy From Purchase. Order.Can any suggest me reagarding with Good solution asap.
    Regards
    ANAND

    Hi Anand,
    When Your Goods Receipt P O Form is Active Click on form Settings in Menubar( 5ty Icon Form Right) Then one window will be opened then click on table format folder and then check the check box against base ref and base key under Visible column
    If you are not adding any comments on GRPO then by default it will show as based ob purchase order XXX.
    Hope it helps you
    Regards
    Vishnu

  • GR Based invoice tick to be made done after goods receipt

    Hai,
    I need a way to do mass updation of GR Based Invoice tick in PO in which goods is already received.
    Some of POs released without this tick and migo is already done. but now I want to tick that check box
    but in system it is in non editable mode.
    regards
    Madhu.

    Hi, Madhu,
    I had the same problem. This field becomes readonly when a good receipt or an invoice is booked. Mass maintenance, LSMW and CATT do not help. But you can use SE16N to set (X) the EKPO-WEBRE field and the goods receipts and the invoices take it into consideration as it was set in the first place.
    Now, running SE16N for a few items it's ok, but if you have thousands of items to modify it becomes out-of-hand. I tried a LSMW on SE16N, unfortunately with no success. Then I tried a Windows program to record the keyboard and mouse actions combined with a tab delimited text file with PO number and PO item and, voila, I have 33000 items modified. The program I used is AutoIt, but there are many free programs doing the same thing.
    Three notes:
    1. Use it on your own risk. SAP Note 457511(FAQ: Purchase order change and goods receipt in purchasing) warns: It inevitably leads to follow-on errors because of mutual field relationships.
    2. SE16N it's not a good place to fool around.
    3. In this way you use SE16N online, so it takes A LOT of time.
    Hope it helps,
    George
    Edited by: George Palaghean on Dec 14, 2009 12:34 PM

  • How to activate the Check box in Purchase Order after Goods Receipt

    Hi All,
    How to activate the check box after Goods receipt of Purchase order in Item view (Goods Receipt is completed).
    Where t make the settings in SPRO.
    Regards,
    Shailendra Hadkar

    Hi
    SPRO - SAP IMG- Material management - Inventory management and physical inventory - Goods receipt - create purchase order automatically - activate auto Po creation for movement type.
    Then activate the auto PO creation in Vendor master - Purchasing view
    Check it out.
    Regards,
    raman

  • Restrict changing the tax code in purchase order after goods receipt.

    Hi,
    Po is created with tax code x1.
    Gr is done for partial quantity.
    IR is still pending.
    User has changed the tax code to x2.
    This case we want to restrict the tax code change in PO after goods receipt.
    Please advice.
    Regards
    Ravi Kumar

    Hi Sumit,
    Po created with wrong tax code x1.
    Stores person has done the receipt and consumed the stock.
    Now user has suddenly realised that tax code is wrong and changed the tax code in PO.
    In IR we will use correct tax code and post the accounting entry.
    Stock values will be adjusted properly. to stock ac if stock is there and to price diff ac if stock is consumed.
    Point is user's are asking that how system is allowing to change the tax code after receipt.
    Point to be attended is restrict the change of tax code by any means after Gr has happened.
    what are the possibilities to restrict the change of tax code.
    Regards
    Ravi Kumar

  • Import Declaration after goods receipt - Inward Processing Help

    Looking for some advice on setting up Inward Processing as I am running into issues.  Our system makeup is this:
    ECC - 617
    GTS - 10.1
    One of our facilities is setup so that they have duty deferment for imported components that are used in manufacturing and re-exported within a 36 month period. Based on this requirement we have determined that we could be leveraging the Inward Processing functionality in GTS to manage / track the inventory for duty purposes.  With that being said, this is what I have configured so far.
    Configuration:
    Purchase document in ECC is setup to transfer to GTS and create an import customs document, the check box for Customs Services is checked.  The corresponding purchasing document in GTS is activated for compliance and customs services.
    Inbound delivery in ECC is setup to transfer to GTS.  I am worried I have done something wrong in this configuration with how it maps in GTS. The document is currently creating a customs document that can be viewed in the import side of compliance.  The document type I mapped in GTS “Inbound Customs Delivery”
    Movement type 101B has been configured to come over from ECC to GTS.
    I configured in ECC the prelim. Document type T1 and also maintained that doc type in GTS which I mapped as prev. doc cat 01.  I then assigned Service LECTPR with prelim doc type category 01 as duty unpaid and target procedure 01 – Transit.
    I configured the authorization for both transit and inward processing, created the “license” for these items, and configured the activity sequence for the matching legal regulation.
    My process has been this:
    Create purchase order in ECC
    Create inbound delivery in ECC
    Update inbound delivery with the prelim doc type T1 and doc number / date
    MIGO with reference to the inbound delivery (movement type 101 against purchase order stored in MSEG)
    In GTS I go to create a customs declaration AFTER goods receipt, but I get a “no data found” information message.  When I debug I can see the that a check is done to pull records from table /sapsll/cuswlo, I have no entries in this table.
    I can see all the documents definitely made it over to GTS because they show up in the General List of Display Customs Declaration Quantities and Goods Receipt quantities (/SAPSLL/CUSWLM).  So at this point I have to be missing some key piece of configuration to allow the Import Declaration to create so the goods become available for inward processing. Any ideas on what I should be looking at that could be missing?
    Rachael

    Ok, then that's (at least) what you need to fix.
    In the Plug-In area, make sure that you've added your Inbound Delivery type to transfer for Customs purposes ("Query Customs Management for Document Type"), and that the technical activation has been turned on for Application MM0B.  For the moment - although it shouldn't make any difference - don't tick to transfer the Inbound Delivery for Compliance Management, or for Placement into Customs Status before GR.
    In GTS, make sure that Document Type 'TRLOIM' is active for Transit, and that the Document Type has an active Number Range.  Then check that the Legal Regulation for Transit (TRSxx) is active for your country code and that the Process Template is assigned in the Control Settings.
    Then see if the IBD is transferred ok.
    Regards,
    Dave

  • Display  Purchase order, PO Item , Order Number ,entry sheet quantity ,entry sheet price ,invoice quantity, invoice price  against each line number

    hello all,
    i have an ALV report requirement like this,
    on the initial screen i have displayed(for a given agreement number like in ME33K )
    in the selection screen i have taken agreement number as EKPO-EBELN.
    purchase document number        item number        short text        target quantity      net price
    5400000019                                  1                      xxx                  1.000                  304300.00
                                                        2                     xxxx                 1.000                  500000.00
    the above fields i have taken from EKPO table.....
    and on double clicking the  item number i have displayed
    line number          service number       short text           quantity    units    gross price   quantity released
    1                           swr10                   xxxx                 2.00          kg          500             2
    2                           swr11                    xxxx                5.00          EA         500             2
    the above fields i have taken from ESLL (esll-extrow, esll-srvpos, esll-ktext1 , esll-menge  etc......)
    this i have done by passing EBELN to ESLH and getting PACKNO and passed this PACKNO to ESLL.
    now my question is i need to display  Purchase order, PO Item , Order Number ,entry sheet quantity ,entry sheet price ,invoice quantity, invoice price
    against each line number above.....
    from which table do i need to take these fields.....
    please guide me....
    thankq....

    Thanks Andra,
    The problem is the multiple invoices is for non goods receipt item so there will be no delivery.At the time of creating a PO the GR is not checked so there will be no delivery .
    Also this setting is for invoices which are comming from Vendors.But if we are genrating the invoices manually it is not blocking those invoices.Also i there is nowhere mentioned in Incomming invoice to set tolerence for incomming invoice.Are you talking about Vendor tolerences?
    Thanks in advance
    Edited by: Metroid01 on May 14, 2009 6:52 PM

  • Possible to Update ERS indicator on PO after Goods Receipt

    He all,
    We had failed to update the ERS settings in the plant data view of the vendor master purchasing data. We have about 1000 PO that were supposed to be paid through ERS but are now not invoiced. Is it possible to set the ERS Indicator after Goods Receipt?
    Thanks,
    Justin

    You can change the Purchasing Group on the Org. Data tab in the PO header in ME22N.  If you have PO release strategies they will not be reset unless PGrp is a characteristic in your release strategies and you change PGrp to a value outside of the range the strategy is using.
    Also, in your system you may not be able to change the PGrp if the screen layout changes the field to display once a GR is posted.  You can see this in the document type field selection or "Define Screen Layout at Document Level".  If the PO release strategies are used, you may need to check the changeability setting for the Release ID.
    Hope this helps.
    Edited by: Paul Shrewsbury on Apr 4, 2011 3:06 PM

Maybe you are looking for