Display query on Web from Query Designer in BI 7.0

Hi,
I am trying to see my report in the web like how I do in BW 3.5.
The sytem taking me to the Browser. But the page is not displayed. The normal cannot display HTML page.
I think I need to configure BEx broadcaster for this.
Can anyone help me on how to solve this problem? with the TCODES etc.,
Thanks,
Praveen

Hi,
You need to enable the web functionality, check this document:
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/994a06ed-0c01-0010-878b-e796a9060209
It's a how to.
If you need further help, just ask!
Hope this helps.
Regards,
Diego

Similar Messages

  • Issue with Broadcasting and Publish query to Portal from query Designer

    Dear all,
    I have created a standard template ZWT_STANDARD_TEMPLATE in WAD and I have added this for Adhoc Analysis in 'Set Standard Web templated' RSCUSTV27.
    For Broadcasting I have added 0BROADCASTING_TEMPLATE70.
    I have problems with my broadcasting as well as publishing the Query in Portal.
    When I use a Broadcast to Email - it opens a new window with my standard template(ZWT_STANDARD_TEMPLATE ) I have added. No data though.
    Same thing happens for publishing too...When I publish the query to portal from Query Designer or WAD it takes me to the same window with my standard web template. No data though.
    I think both are related to the same issue. Its with broadcasting.
    What is the default template for Broadcasting in NW2004s? Below is the url I have included when I do it from Query designer. Its actually starting the Command - START_BROADCASTER70 but I dont know if it has to do a SOURCE_QUERY=ZCOPA_C03_FAST_PAYABLES. Could anyone compare it with your urls
    http://pgdep00:50000/irj/servlet/prt/portal/prtroot/pcd!3aportal_content!2fcom.sap.pct!2fplatform_add_ons!2fcom.sap.ip.bi!2fiViews!2fcom.sap.ip.bi.bex3x?system=SAP_BW&CMD=START_BROADCASTER70&SOURCE_QUERY=ZCOPA_C03_FAST_PAYABLES&START_WIZARD=X&DISTRIBUTION_TYPE=PCD_EXPORT
    This is the url for publishing from WAD
    http://fndef00:50000/irj/servlet/prt/portal/prtroot/pcd!3aportal_content!2fcom.sap.pct!2fplatform_add_ons!2fcom.sap.ip.bi!2fiViews!2fcom.sap.ip.bi.bex3x?system=SAP_BW&CMD=START_BROADCASTER70&SOURCE_TEMPLATE=ZWT_FAST_PAYABLES&START_WIZARD=X&DISTRIBUTION_TYPE=PCD_EXPORT
    Any help would be highly appreciated.
    Thanks,
    KK

    Hi KK,
    Did you solve your problem, i am also having the same issue. Please let me know if you have solved this issue.
    Thanks,
    Kumar

  • DP_1 is not assigned to Chart&Analysis on executing BW query in web from Qu

    Hi,
    While executing BW query in portal from query designer, is giving error that DP_1 is not assigned to Chart and Analysis web item. And is not showing any output.
    Standard web template 0ANALYSIS_PATTERN is used as template for adhoc queries.
    But if I execute any web template (standard or customised) from WAD (web application designer) is not giving any error DP_1 related.
    Any inputs is much appreciated.
    Thanks!!

    Hi,
    Generally, after creating query in query designer, you can execute in browser.
    But to run in WAD, you have to create web template and assign Data Provider(Query) to it. This also you can execute in browser(nothing Portal).
    The reason for your error is: you have not created web template for your query it seems.
    Hope you understand the inter-link concept.....
    Regards,
    Suman

  • Display blob on web from Forms9i

    Hi,
    How do I display a blob (pdf, tif, gif, jpeg) in a browser that was uploaded via webutil client_to_db? I would like the user to push a button on the form (9i) and the document(blob) would be diplayed from the database. I can't seem to find much useful info on this subject. Any suggestions would be appreciated. Thanks.

    The first one I think of would be to download it to the client, using db_to_client, and then display it with web.show_document('file://yourpicture_or_yourdocument','_blank');
    Better would probably be to display it directly from the database. There exists a package for that, cannot just remember which one. Check the database documentation, or do a search in Metalink, or try the database forum.
    Regards,
    Martin Malmstrom
    PS. Since it's your first post I welcome you to the Oracle Forums here on OTN!

  • MUSE CC WON'T DISPLAY BEBAS NEUE WEB FONT IN DESIGN MODE

    For some reason I can't seem to view the Bebas Neue web font in design mode any more, yet when I switch to preview or even go ahead and publish my site it works just fine.
    It wasn't bothering me too much at first but it really confuses things after a while as I have to guess the sizes and spacing because the font that appears instead of Bebas Neue is Times New Roman (or similar).
    All the other web fonts are working just fine. I've tried to reset the web fonts and apply them again but had no luck, and I even closed and restarted Muse CC several times but again, nothing!

    Please refer to the following thread for a solution - http://forums.adobe.com/message/6259161.
    Thanks,
    Vinayak

  • Problem display query in web

    Hi experts
    We trying to see query  to the web, from query designer we are klicking to display query to web, but that open only balnk page.
    Also need a detail or step by step help link for WAD
    Please help me and get points
    Thanks in advance

    Hi,
    http://help.sap.com/saphelp_nw04s/helpdata/en/1a/456a3badc1b315e10000000a114084/frameset.htm
    Web Application Designer
    urgent help on WAD(web application designer
    WEB APPLICATION DESIGNER
    WAD(Web Application Designer)
    Check these link's on Web application Desining:
    Web Application Designer for Beginners
    https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/749a4622-0a01-0010-36bf-b6b30a2a3a22
    http://service.sap.com/bi -> SAP BW InfoIndex -> Web Application Design (3.x)
    http://help.sap.com/saphelp_nw04/helpdata/en/1a/456a3badc1b315e10000000a114084/frameset.htm
    Have a look at these links
    http://help.sap.com/saphelp_nw04/helpdata/en/1a/456a3badc1b315e10000000a114084/content.htm
    http://help.sap.com/saphelp_nw04/helpdata/en/47/d4fed1c60a9743ade3b4cf306d5d48/content.htm
    http://help.sap.com/saphelp_nw04/helpdata/en/40/8b174082fe1961e10000000a155106/content.htm
    Gothrough the how to guide "How to enhanace the standard web template" for step by step procedure with the screen shots.
    https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/dc1d9990-0201-0010-16aa-db3c4eb8b642
    cheers
    sunil

  • Display select list from query on manual tabular form

    Hello,
    I'm trying to display a select list from query on a manual tabular form. I'm using a collection to store the data. I can't seem to get the query to work. I can display the item as a text item. Any help would be appreciated. Thanks, Elizabeth.
    SELECT
    -- Notice how I'm keeping the idx value the same as the column value in the collection. This helps to keep things organized
    -- I also apply an id to each entry
    -- I append the error value to the empname and sal
    -- The Seq_id. Usefull when hiding rows (for delete) and then submitting from
    apex_item.hidden(1,x.seq_id, null, x.seq_id || '_seq_id') ||
    -- The Primary Key of the column
    apex_item.hidden(2, x.ceah_people_id, null, x.seq_id || '_ceah_people_id') || x.ceah_people_id ceah_people_id,
    -- Employee Name
    case when x.seq_id = -1
    then
    apex_item.select_list_from_query (3,
    NULL,
    'select distinct language_name d, '
    || 'language_id r from foreign_language',
    'style="width:170px" ' ,
    'YES',
    '0',
    '- Select Language -',
    'x.seq_id_' || LPAD (9900 + LEVEL, 4, '0'),
    NULL,
    'NO'
    else
    apex_item.text (3,(select language_name from foreign_language where x.language_id = foreign_language.language_id),
    80,
    100,
    'style="width:170px" readonly="readonly"',
    'f32_' || LPAD (ROWNUM, 4, '0')
    end
    || err.language_id language_id,
    /* apex_item.text(3,x.language_id,null, null, null, x.seq_id || '_language_id') || err.language_id language_id,
    -- Employee Salary
    apex_item.text(4,x.proficiency, null, null, null, x.seq_id || '_proficiency') || err.proficiency ||
    -- Store the sql action type as well.
    apex_item.hidden(50,x.sql_action_typ, null, x.seq_id || '_sql_action_typ_id') proficiency,
    -- Last but not least the row error
    err.row_error
    FROM (SELECT ac.c001 seq_id,
    ac.c002 ceah_people_id,
    ac.c003 language_id,
    ac.c004 proficiency,
    ac.c049 modifiable_flag,
    ac.c050 sql_action_typ
    FROM apex_collections ac
    WHERE ac.collection_name = 'DATA_COLLECTION'
    ORDER BY ac.seq_id) x,
    -- Error Collection
    (SELECT ac.seq_id seq_id,
    ac.c002 ceah_people_id,
    ac.c003 language_id,
    ac.c004 proficiency,
    ac.c050 row_error -- Useful when individual data is correct, however the row of data is not. Ex: start/end dates
    FROM apex_collections ac
    WHERE ac.collection_name = 'ERROR_COLLECTION'
    ORDER BY ac.seq_id) err
    WHERE x.seq_id = err.seq_id(+)

    I got so frustrated I started over. I'm following the how to create a manual form.
    http://www.oracle.com/technology/products/database/application_express/howtos/tabular_form.html#MANUAL
    The problem I'm now having is even though I display items as hidden, there is a column holder on the report for them. If I go into the report attributes and toggle the show attribute off I cannot reference an items value in my logic. I used /&nbsp/ for the column heading but I still get the little sort arrow where the column heading should be. I tried to toggle the sort attribute off but the sort arrow still shows up. How can I use the apex_item.hidden and not get a place holder for the column on a report? Thanks, Elizabeth
    Here is the code I'm using to generate the report:
    select x.ceah_people_lang_id,
    x.language_id,
    x.proficiency,
    x.ceah_people_id
    from (
    select apex_item.hidden(1,ceah_people_lang_id) ceah_people_lang_id,
    apex_item.select_list_from_query(2,language_id,'select language_name, language_id from foreign_language') language_id,
    apex_item.select_list_from_query(3,proficiency,'select name, id from proficiency') proficiency,
    apex_item.hidden(4,ceah_people_id) ceah_people_id
    from ceah_people_language where ceah_people_language.ceah_people_id = :P152_person_id
    union all
    select apex_item.hidden(1,null) ceah_people_lang_id,
    apex_item.select_list_from_query(2,null,'select language_name, language_id from foreign_language') language_id,
    apex_item.select_list_from_query(3,null,'select name, id from proficiency') proficiency,
    apex_item.hidden(4,null) ceah_people_id
    from dual) x

  • BI to Web connectivity: Query designer's query cannot display in IE

    Hi all,
    I have configured web connectivity and from SMICM if I type the URL in IE it prompts for user/password and connects to BI, however, from query designer if a query is published on web the URL will point towards standard sap.com at port 50100 and IE will display a broken link message.
    After a bit of research I discovered that httpplugin.dll is missing from /usr/sap/sys/exe and there is no folder under /exe where the httpplugin.dll is expected to be.
    Any suggestion, please.
    Thanks.

    Below is the URL that IE points to:
    http://portal-dmb.wdf.sap.corp:50100/irj/servlet/prt/portal/prtroot/pcd!3aportal_content!2fcom.sap.pct!2fplatform_add_ons!2fcom.sap.ip.bi!2fiViews!2fcom.sap.ip.bi.bex?QUERY=EX4_TBW20&VARIABLE_SCREEN=X&DUMMY=1
    Thanks.

  • Problem with the icon "Display query on the web" in Query Designer

    Hi Friends,
             I was told by my PM to give them all FI Modules standard business contenet reports, so for that reason i have installed all FI business content & loaded the data in the Dev Server, now i just want to show the reports, but i want excute these reports in Internet Explorer using the Icon "Display Query on the WEB" in query designer, when i click on that it isn't getting displayed in the browser.
             the URL coming like this, "http://itcchqbd:8100/sap/bw/BEx?sap-language=EN&bsplanguage=EN&CMD=LDOC&INFOCUBE=0FIAA_C11&QUERY=0FIAA_C11_Q0001&VARIABLE_SCREEN=X&DUMMY=1"
    getting the message in the page, the page can't be displayed,
              How to solve this problem & how do i have to show the standard business content reports to all FI Superiors ?
    awaiting for ur answers
    Regards,
    Balaji

    Balaji,
    first check if you have enabled web reporting on your BW server ( there is a how to paper for the same )
    another way to check out the same is to find out if there are existing web templates being published which would make the server web ready.
    As for FI content - activate the FI relevant areas in Business content and then activate the respective datasources and then load the data.. or go trough the best practices for BW-FI ( service.sap.com/bestpractices) wnd then activate the best practices for the same.
    Hope it helps.
    Arun
    Assign points if useful

  • QA: Designer's operation to Add one more Field to display in Query Result Web Part

    QUESTION ABOUT Query Result Web Part presentation +1 Field
    I'd be looking at a property of Web Part to look up Discussion Board through Query Result Web Part. Currently it displays 'Title' column of Discussion Board, and my caring requirement is presentation customization to hold double
    columns of 'Title'+'Updated Date'. How could I add one more field 'Updated Date' to display in addition to that preexisting 'Title' field?
    Any procedural steps to realize how to add Filed to display in Query Result Web Part?

    Hi Yoshihiro,
    As I understand, you want to add the field to display in Query Result Web Part in SharePoint 2013.
    Which web part does you use? Content query web part or search results web part?
    If you use search results web part, you could edit the discussion board result template and add the updated field in the template.
    You could go to Design Manager: Edit Display Templates (site setting-> look and feel->design manager->edit display template), download the Discussion Item.htm file, and edit the file. 
    After editing, upload the file.
    The articles below are about how to modify an existing Display Template in SharePoint 2013.
    http://www.learningsharepoint.com/2012/09/17/sharepoint-2013-the-new-display-templates-for-styling-your-content/
    http://blogs.technet.com/b/sharepoint_quick_reads/archive/2013/08/01/sharepoint-2013-customize-display-template-for-content-by-search-web-part-cswp-part-1.aspx
     If you use content query web part, you could edit the content query web part, in the Property Mappings section select the “Change the mapping of managed”, and add the “modifiedOWSDATE” (it means the last modified date) in the line, after
    that you could see the update date under the title.
    Best regards,
    Sara Fan
    TechNet Community Support
    Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact
    [email protected]

  • Displaying a BW query in web interface

    Hello People ,
    I am trying to see a BW query in a web interface . I will tell you how am I doing it . I run the transaction RRMX which opens an excel sheet and gives me a tol bar from which I open a query . Then I choose info areas from the next window and it shows me a tree structure with two nodes
    1) Financial
    2) Industry sectors
    I expand industry sectors > retail > staff works
    This takes me to two nodes
    1)       operational
    2)       sales infocube
    I expand sales infocube and this takes me to a couple of nodes
    1)       Key business driver
    2)       Manager forcasted sales
    3)       Productivity data source
    4)       ….
    5)       ….etc
    I select key business driver and choose the “CHANGE” icon from the toolbar . This opens the query designer . There I have an icon in the toolbar which says “display quey on web” . I click that and it attempts to display the query in internet explorer .
    Now the problem is the the message that appears on the browser is
    Warning sign : variable OFPER for characterstic fiscal year/period has been converted to required entry .
    Error sign : Error when generating data provider .
    Now my question is what does this message mean ?Does this mean that the required content that I am trying to access has not been activated or there is some configurational issue ?
    Regards
    Deepak Singh

    Hi Deepak,
    It means that there is a selection screen for Fiscal period in which you have to enter the Fiscal Period. Only for the Fiscal period for which you entered the data would be displayed.
    But the best way to create teh web report is to goto Web Application Designer -> Drag and drop the "Table" webitem on the right hand side -> Assign the Query to the web item. Now execute it in browser from the Web Application designer. Copy the link and use it whenver you want it.
    Bye
    Dinesh

  • Display Bex Query in Web

    Hi,
    I want to display the Bex query directly in web.What are the possible ways that i can do, for the user to view the report in the web.Can anyone tell me how to configure RRMX in this case or how to do the settings for user to navigate from user menu to the required BW report directly from the SAP work bench.?I have tried linking from User Menu where the java servlets blocking the navigation.? Do i need to follow any configuration for this too?
    Thank You,
    Edited by: sunanda G on Feb 28, 2011 9:59 AM

    Hi,
    There are multiple ways to display the query in Web:
    ->Web Analyzer: In the query designer you need to click on the web symbol it will take you to run the query in web in the explorer. For this your server need to be setup contact your basis team for the same.
    ->WAD: After creating a query, you can display the same using Web application designer. Here you need to check the Java Settings to be installed.
    ->EP: You can copy the link generated from the query can be copied and displayed in the Enterprise portal.
    There is a search option available in the SDN , you can search for more information regarding the same.
    Hope this helps...
    Rgs,
    Ravikanth

  • Query in web page cannot be displayed

    Hi,
    When queries are executed on the web, "page cannot be displayed" is returned.
    I checked,
    SMICM and HTTP is active.
    SICF the BEx service is active but, when i test it , it returns page cannot be displayed.
    Also, can i know where the setting is made for the port that is used when a query is run on the web from the query designer.
    Any suggestions to resolve this.
    Raj.

    Raj,
    the setting is made in the RZ10 parameters - and also you can check the active http ports through SMICM - goto --> HTTP Server details.. or something like that.
    Arun

  • Multiple value selection from a base query to jump query in Web

    Hi ,
    System info
    SAP BW 3.5               level-9
    PI_BASIS -2004_1_640     level-8
    SAP_ABA  -640            Level-11
    SAP_BASIS-640            Level-11
    We have an inventory query with Profit Center,Plant & Material as characteristic. When we run the query, for example we get 10 materials for a plant. We want to keep those materials as filter value for material & want to jump to another query. The Jump query will only execute for those selected materials.
    We can able to do the above scenario in BW BEx analyzer but we are not able to do in the web. Any input to resolve the issue are welcome.
    example
    Query A
    Profit Center     Plant  Material
    PC12345          P542     M1
    PC12345          P542    M2
    PC12345          P542    M3
    PC12345          P542     M4
    PC12345          P542     M5
    PC12345          P542     M6
    PC12345          P542     M7
    PC12345          P542     M8
    PC12345          P542     M9
    PC12345          P542     M10
    Select M1 to M10 & right click "Keep filter value"
    Then remove Material from the drilldown.
    The query looklike this:
    Query A
    Material M1....M10
    Profit Center     Plant 
    PC12345          P542     
    Then right click on P542 "Goto" jump query B.
    Query B get executed on those selected materials(M1...M10) as we have a material variable in query B which is mandatory.
    In a nut we are selecting more then one value & going to another query.
    Regards
    Mahendra

    when u select KEEP FILTER VALUE at tat instance u can select only 1 value
    HOW DID U SELECT   M1 & M10 bot within one hit.
    instead of using this option.... did u try restriction
    wat i mean is when u know before hand that u need only m1 & m10
    remove material first from the display
    it will automatically reside in Free chars
    right click material and hit RESTRICT
    select m1 &  m10
    hit okey
    now u will see desired result...
    now try jump query...
    try removing the material variable from query b , just for experiementing purpose
    and then repeat above exercise...
    let us know how u go with it

  • 0ADHOC error while executing the query from Report Designer

    Hi All,
    When I am executing The Query from Report Designer,  am getting the below error.
    Please help me in this regard.
    The initial exception that caused the request to fail was:
    The Web template "0ADHOC" does not exist in the master system
    com.sap.ip.bi.base.exception.BIBaseRuntimeException: The Web template "0ADHOC" does not exist in the master system
    at com.sap.ip.bi.webapplications.runtime.service.template.impl.TemplateService.getTemplateContent(TemplateService.java:57)
    at com.sap.ip.bi.webapplications.runtime.jsp.portal.service.template.PortalTemplateAccessService.getTemplateContent(PortalTemplateAccessService.java:82)
    at com.sap.ip.bi.webapplications.runtime.preprocessor.Preprocessor.parseTemplate(Preprocessor.java:163)
    at com.sap.ip.bi.webapplications.runtime.xml.XmlTemplateAssembler.doInit(XmlTemplateAssembler.java:79)
    at com.sap.ip.bi.webapplications.runtime.template.TemplateAssembler.init(TemplateAssembler.java:133)
    Thanks,
    KVR

    Hi,
    The web template 0ADHOC is usually the standard web template for 3.x queries. The Report Designer executes the reports in java web, thus tries to find the template 0ADHOC in the 7.0 templates and does not find it. Check whether you have maintained the standard web template 0ADHOC for 7.0 reports also:
    Transaktion SPRO -> SAP Reference Image -> SAP NetWeaver -> Business Intelligence -> Settings for Reporting and Analysis -> Bex Web -> Set Standard Web Templates
    Best regards,
    Janine

Maybe you are looking for