Display Report output in Matrix format
Hi
I want to display normal report output in somewhat this manner.
I will have one change requrest number and many transport requests will be assigned to that change request number, and to the transport requests many objects will be assigned.
I have to display the output in this format:
Change Request 1 | Tr No.1 | Tr No.2 | Tr No.1 | and so on....
Obj1
Obj2
Obj3
Change Request 1 | Tr No.1 | Tr No.2 | Tr No.1 | and so on....
Obj1
Obj2
Obj3
Like this it should go on.
I have done the coding part, how to display the data in the above format i am not getting any idea, please help me out if you have any ideas.
Thanks & Regards
Haritha.
Hi Vijay,
First of all thank you for the response.
I am retrieving the data from different tables and putting all the data in one internal table called i_final. Below is the declaration of that internal table and how i have populated the data to that. I am using control break statements to display the data but the data is coming in the next line.
Please see the final internal table:
1. Declaration:
Data:Begin of i_final occurs 0,
ccsnr like ysts-ccsnr,
trkorr like ysts-trkorr,
obj_name like e071-obj_name,
check_box(1),
status LIKE YSCS-STATUS,
End of i_final.
2. Populating different internal tables data to this table:
loop at i_ccno.
i_final-ccsnr = i_ccno-ccsnr.
i_final-trkorr = i_ccno-trkorr.
read table i_status with key trkorr = i_ccno-trkorr.
if sy-subrc = 0.
i_final-status = i_status-status.
endif.
read table i_obj_name with key trkorr = i_ccno-trkorr.
if sy-subrc = 0.
i_final-obj_name = i_obj_name-obj_name.
endif.
append i_final.
clear i_final.
endloop.
3. Using Control break statements to display the data.
sort i_final by ccsnr.
loop at i_final.
at new ccsnr.
write:/2 i_final-ccsnr.
endat.
write:20 i_final-trkorr.
uline.
endloop.
But the output is coming like this:
CHG0003785 HSDK933109
HSDK933111
HSDK933113
HSDK933143
HSDK933268
But i want the output like this:
CHG0003785 | HSDK933109 | HSDK933111 | HSDK933113
Thanks & Regards
Haritha.
Similar Messages
-
Oracle reports output in excel format does not display the graphs
Oracle reports output in excel format does not display the graphs: "linked image cannot be displayed".
The output file in PDF format the graph is supported.Do you have any header and footer on your template?
If you have any header and footer then try to adjust it as of to display full page.
Thanks
Yasar -
Displaying the report output in excel format
Please help me in getting the report output in excel format.
thnksI ran into a BIG problem after passing from 6i rep server to 9i rep server.
On 6i rep server I used to set DESFORMAT='DELIMITED', and that produced reasonable tab-delimited output for reports that did not have group above (all the query groups were from left to right, not a single group having fields displayed above some other group). When deployed on rep server 9i, the same reports produced some unexplainable output: some of the rows were duplicated, but I couldn't figure out any rule.
So, the best thing to get the reports into something that fits in .xls would be to have the output in .xml, that may be imported in Excel. -
Xml report output in excel format without using options tab in EBS
How to get xml publisher report output in excel format without using options tab in EBS?
I am getting XML Publisher report output in excel format by using options tab while submitting the concurrent request .
But i want to get excel output automatically.
Can anyone give idea to get XML publisher Report output in excel without selecting options tab.
Thanks in advance
Sandeep VHey Sandeep,
I am working on a similar format for a report and if possible can you please give me some guidelines. I have initially created reports using XML Publisher, but for those , the output preview format was PDF. So, if I select the preview format as EXCEL will it give me output in Excel and for this to happen, how do I define the rtf template. I believe the working will be same as for PDF, create a rdf report, get output in XML and apply the template to get the data in Excel or there is something different to this.
Thanks,
Sunil -
How to get Report Output in csv format
Hi,
How can i get report Output in csv format, can any one tell me the word used for output type to get output in csv format.
i have used XLS output type but it opens in excel format.
conc.addLayout(appCode,concReqCode,"en-US","US",XLS);
Thanks
BabuHi Babu,
Till now in xmlpublisher there is no method to create file in csv format ,you have to create Excel file and then save it in .csv format.Unless and until ur using BI Publisher in which some work around are possible.
Thanks -
Oracle HTMLDB report output in PDF format using FOP
Hi,
We are currently using Oracle HTMLDB1.6.I am trying to implement the HTMLDB report output in PDF format.I got at document but it is not clear.Could you please let use know wheether anybody has already used in their organization.
Appreciate your response.
Regards
MuraiHey Murai,
did you read the technote:
http://www.oracle.com/technology/pub/notes/technote_htmldb_fop.html
There is anything explained!
greets,
tim -
Report output in PDF format instead of TEXT
Hello every1,
I am using oracle application E-bS version 11.5.10.2 and i want ORACLE reports output in PDF format instead of standard 'text' default format(the place where v register concurrent programs). so can any one tell me what changes should i do to achieve my goal i had change format as pdf in concurrent program and run report but it shows error as follows:
REP-3000: Internal error starting Oracle Toolkit.
REP-3000: Internal error starting Oracle Toolkit.
Plz. share your knowledge regarding.
Radhi
Edited by: user713 on Jun 20, 2011 9:32 AMHi,
check this support note.
Reference
Master Note : Comprehensive REP-3000 Troubleshooting and Overview Guide (Doc ID 200474.1)
Regards, roberto -
Printing report output in PDF format
Hi,
I want to know what are the settings needed to print a report output in PDF format, while executing the report from Oracle applications (Ver 11.5.6).
Report is executed as a concurrent request from Oracle applications.
Normally when we run the report from Oracle applications, output will be opened in a internet browser(IE) in HTML format. But I want the output to be opened in PDF format instead of HTML.
OS: Sun Solaris 2.8.
Thanks & Regards,
SarishHi Sarish
Please contact Oracle Support for an answer or to customise your application so that it prints a report output in PDF Format.
To get PDF output you must run report/job with DESFORMAT=PDF in the command line instead of DESFORMAT=HTML/HTMLCSS.
Regards
Sripathy -
Is it possible to save (or export) report output in XML format, it is ok with either WebI or DeskI report, here we are concerned about output format not what type of report we can use to produce the output in XML format.
Thank you,
SriniHi Srinivas,
Only options available in WEBI or DESKI is to save documents in Excel or PDF format.
As a workaround you can use Excel as an intermediate between your WEBI or DESKI document to XML format.
When you try to save WEBI document in XML Data format you may get following Error because the Excel sheet does not contain any XML format that requires.
u201CCan Not save XML data because the workbook does not contain any XML mappingsu201D
Solution:
1. Excel cannot save all or part of your workbook as XML Data if you have not created one or more mapped ranges.
2. If you haven't added an XML map to your workbook, or your data is not contained within an XML list, then you can save your workbook in the XML Spreadsheet file format.
If you have added an XML map to your workbook, follow these steps to map XML elements to your worksheet:
1. On the Data menu, point to XML, and then click XML Source to open the XML Source task pane.
2. To map one or more elements to your worksheet, select the elements in the XML Source task pane. To select nonadjacent elements, click one element, and then hold down CTRL and click each element.
3. Drag the selected elements to the worksheet location where you want them to appear.
I Hope this helps to find the path of solution with Ease.
Thanks...
Pratik -
Hi Experts,
My requriement is I have to send a mail with report output in excel format as an attachment.
I wrote the below subroutine for building excel sheet but I am getting output in the single row. I am using version 4.6
Please help me regarding this. ASAP
FORM BUILD_XLS_DATA .
CONSTANTS: CON_CRET TYPE STRING VALUE '0D', "OK for non Unicode
CON_TAB TYPE STRING VALUE '09'. "OK for non Unicode
CONCATENATE 'Vendor' 'Country' 'Name'
INTO IATTACH SEPARATED BY CON_TAB.
CONCATENATE CON_CRET IATTACH INTO IATTACH.
APPEND IATTACH.
LOOP AT IT_lfa1.
CONCATENATE IT_lfa1-lifnr IT_lfa1-land1 IT_lfa1-name1 INTO IATTACH
SEPARATED BY CON_TAB.
CONCATENATE CON_CRET IATTACH INTO IATTACH.
APPEND IATTACH.
ENDLOOP.
ENDFORM. "build_xls_data
Thanx,
SudhaHi Sudha,
I am sending the standard format of sending a mail along with an attachment in .xls format.
Try this code.
form sendmail.
CLEAR GV_DELIMIT.
GV_DELIMIT = CL_ABAP_CHAR_UTILITIES=>HORIZONTAL_TAB.
TEMPREAD = LV_LNCNT1.
REFRESH OBJTXT.
CONCATENATE 'The no. of error records are : ' TEMPREAD
INTO OBJTXT-LINE.
APPEND OBJTXT.
CLEAR OBJPACK. REFRESH OBJPACK.
CONCATENATE C_CODE
C_CMMT
C_COMMENT1
INTO OBJTXT-LINE SEPARATED BY GV_DELIMIT.
APPEND OBJTXT.
LOOP AT IT_DATA INTO WA_DATA.
CONCATENATE WA_DATA-ZCODE
WA_DATA-ZCOMMENT
WA_DATA-ZREASON
INTO OBJTXT-LINE SEPARATED BY GV_DELIMIT.
APPEND OBJTXT.
ENDLOOP.
CLEAR GV_DELIMIT.
CLEAR OBJPACK. REFRESH OBJPACK.
CLEAR DOC_CHNG.
TAB_LINES = 0.
OBJHEAD = REJFILE. APPEND OBJHEAD.
DESCRIBE TABLE OBJTXT LINES TAB_LINES.
READ TABLE OBJTXT INDEX TAB_LINES.
DOC_CHNG-OBJ_NAME = REJFILE.
MOVE TEXT-006 TO
DOC_CHNG-OBJ_DESCR.
DOC_CHNG-DOC_SIZE = ( TAB_LINES - 1 ) * 255 + STRLEN( OBJTXT ).
CLEAR OBJPACK-TRANSF_BIN.
OBJPACK-HEAD_START = 1.
OBJPACK-HEAD_NUM = 0.
OBJPACK-BODY_START = 1.
OBJPACK-BODY_NUM = 1. " 3.
OBJPACK-DOC_TYPE = 'RAW'.
APPEND OBJPACK.
FOR ASCII TO BINARY OBJECT FUNCTION
TOTLINEXFER = 0.
TOTXFER = 0.
BINMAXLEN = 255.
REFRESH OBJBIN.
LV_CR = CL_ABAP_CHAR_UTILITIES=>CR_LF.
TGTMAXLEN = BINMAXLEN.
TGTLEN = 0.
LOOP AT OBJTXT FROM 2.
IF NOT OBJTXT-LINE CP 'The no. of records are '." AND
CONCATENATE OBJTXT-LINE LV_CR INTO BUFFER.
SRCOBJLEN = STRLEN( BUFFER ).
SRCOBJPTR = 0.
WHILE SRCOBJLEN > 0 .
XFERLEN = TGTMAXLEN - TGTLEN.
IF XFERLEN > SRCOBJLEN.
XFERLEN = SRCOBJLEN.
MOVE BUFFERSRCOBJPTR TO OBJBIN-LINETGTLEN.
TGTLEN = TGTLEN + SRCOBJLEN.
SRCOBJLEN = 0.
CLEAR BUFFER.
ELSE.
MOVE BUFFER+SRCOBJPTR(XFERLEN) TO
OBJBIN-LINE+TGTLEN(XFERLEN).
APPEND OBJBIN.
CLEAR OBJBIN-LINE.
TGTLEN = 0.
SRCOBJLEN = SRCOBJLEN - XFERLEN.
SRCOBJPTR = SRCOBJPTR + XFERLEN.
TOTLINEXFER = TOTLINEXFER + 1.
ENDIF.
TOTXFER = TOTXFER + XFERLEN.
ENDWHILE.
ENDIF.
ENDLOOP.
IF TGTLEN > 0.
APPEND OBJBIN.
TOTLINEXFER = TOTLINEXFER + 1.
ENDIF.
CLEAR OBJPACK-TRANSF_BIN.
OBJPACK-TRANSF_BIN = 'X'.
OBJPACK-HEAD_START = 1.
OBJPACK-HEAD_NUM = 0.
OBJPACK-BODY_START = 1.
OBJPACK-BODY_NUM = TOTLINEXFER.
OBJPACK-DOC_TYPE = 'XLS'.
OBJPACK-OBJ_NAME = REJFILE.
OBJPACK-OBJ_DESCR = 'Rejected Entries File'.
OBJPACK-DOC_SIZE = TOTXFER.
APPEND OBJPACK.
REFRESH RECLIST.
MAIL1 = Recepient Mail Id
RECLIST-RECEIVER = MAIL1.
RECLIST-REC_TYPE = 'U'.
APPEND RECLIST.
CALL FUNCTION 'SO_NEW_DOCUMENT_ATT_SEND_API1'
EXPORTING
DOCUMENT_DATA = DOC_CHNG
PUT_IN_OUTBOX = 'X'
COMMIT_WORK = 'X'
TABLES
PACKING_LIST = OBJPACK
OBJECT_HEADER = OBJHEAD
CONTENTS_BIN = OBJBIN
CONTENTS_TXT = OBJTXT
RECEIVERS = RECLIST.
IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
endform.
Hope this is helpful to you. If you need further information, revert back.
Reward all the helpful answers.
Regards
Nagaraj T -
How to retrieve complete report output in HTML format
Hi,
I'm looking for how to retrieve complete report output in HTML format.
I have tried the following and it only give me first page of the report output where in the actual report output should be 5 pages. Is there something I'm missing.
CallbackOption[] boCallOpt = new CallbackOption[1];
ImageManagement boImgMan = new ImageManagement();
boImgMan.setCallbackScript("getImage.jsp");
boImgMan.setImageManagementHolder("imageName");
boImgMan.setDocumentReferenceHolder("docRef");
boCallOpt[0] = boImgMan;
RetrieveData oRetrieveData = new RetrieveData();
RetrieveView oRetrieveView = new RetrieveView();
oRetrieveView.setCallbackOption(boCallOpt);
oRetrieveData.setRetrieveView(oRetrieveView);
Action[] oActions;
oActions = new Action[1];
oActions[0] = fillPrompts;
oReportEngine.getDocumentInformation(boDocInfo.getDocumentReference(), null, oActions, null,oRetrieveData);
Testing this on BOE XI 3.0
Thanks,For Web Intelligence, HTML is an interactive viewing format and not an export format such as PDF.
Note that the HTML will be embedded with postback URLs to the application for images and drill downs.
Closest you'd get is to be able to specify HTML output of an entire REPORT rather than REPORT_PAGE in the ViewSupport.setViewMode method. But this brings back just one report in the document, and will have postback URLs mentioned above.
Sincerely,
Ted Ueda -
How to open Report output in RTF format using concurrent request form.
Hi
I have created a report using BI publisher and RTF format. This report is working fine in PDF format. User can submit report using consurrent request form and can see report preview in PDF format.
Now user wants to submit another request and wants to see report output in RTF format.
User submitted a request, request successfully completed and generated a output RTF file in unix box but when user wants to see report output using concurrent request form (View Output) then window is showing raw data instead of RTF output.
Can any body tell me about solutions?
Thanks
RaviHi Ravi
I did little R&D on it and found following 2 solutions.I am sure that you also find something but for my shake i am putting it here.If you already find the solution then ignore it.
I) 1st Solution
1)Change the profiles 'Viewer: Application for Text' and put value as 'Browser'
2) Change the profiles 'Viewer: Text' and put value as 'Browser'.Either change it system level or concerned user.
3) Log out from Current session and close all internet explorer application.
4) Log in again to check the result
II) 2nd Solution
1) Navigate to: Sys admin --> Install -> Viewer Options to open the Form "Viewer Options".
Do the entry as shown below:
File_Format Mime Type Description
RTF application/rtf Microsoft Word(.rtf)
RTF application/msword Microsoft Word(.rtf)
2) Then ensure that the profile option Viewer: Application for Text is set to BLANK at the Site Level and User Level.
3) Then ensure that the profile option Viewer: Text is set to 'browser' at the Site Level.
-- It will pop-up the screen to choose application name from above two values.
Hope this will work it for you. For me i replicated the scenario and both solutions were working for me.
With Best Regards
Darshan Bhavsar -
Module Pool to Display the Values in Matrix Format
Hi Experts,
I have one requirement which as follows,
In Module pool program i need to display the Values in Matrix format i.e,
Row = Color
Column = Size
Can you Please Help me out.
Thanks n Advance.
Logucreate your internal table dynamically (with number of columns corresponding to number of sizes)
this is done easily with class CL_ALV_TABLE_CREATE method CREATE_DYNAMIC_TABLE
then use the internal table for ALV output -
How to Display Report Output in X & Y Axis Format based on Date & Site ?
Hi,
I got a requirement to display the output of a Report in X & Y Axis Format like Date in Vertical wise & Site in Horizontal wise.
please suggest me how to do this.These programs also..
GFW_PROG_BAR : Bar chart example
GFW_PROG_PIE: Pie chart example -
Issue while downloading the alv report output in spreadsheet format .
Hi,
I have a report output, whenever I try to download it in the spreadsheet format to my desktop,
I get the following issue:
Say the correct material number is 10833340001218999 or 10030000063207001
(This appears in the report output)
But in the excel file the number is displayed as 10833340001218900 and 10030000063207000.
Please help.
Regards,
Sucharita.Hi Sucharita,
The reason for your problem could be that in excel 2007, characters more that 15 are replaced with 0.
Or you can try downloading the data using FM 'GUI_DOWNLOAD' , if currently you are using stadard SAP functionality of data downloading.
Best Regards,
Vishal.
Maybe you are looking for
-
When I try to do this, I right-click in the compose area and click on "import image" and all I get is the image capture window which doesn't show anything. How do I do it from iphoto or another location such as the pictures folder?
-
hello, how do i get music and photos back on my phone please HELP !! x
-
Can't initialize OCI error occured during the login process using TOAD 9.0
I have installed the Toad 9.0 recently while login using the username & password for oracle 10.0 database , i am getting the error Can't initialize OCI Error 1 But i am able to login using the Sql Plus successfully.. Thanks in Advance.
-
Illustrator CS3 Save as Postscript Issue
Utilizing Illustrator CS3 on Mac OSX Tiger - Unable to output Postscript file. Getting the following error message: "The Save as PDF and Save PDF as PostScript options in the Printer dialog are not supported." However, we are able to output Postscrip
-
Can't catch execeptions under Suse 9.0
Hi Forum, I compiled a small testprogramm under Suse 9.0 with the GCC 2.9.5.3 Version. The Programm works fine if nothing goes worong! If e.g a wrong user name is entered the programm does exit without a detailed exception description. But the code i