Display resolution on netbook not compatible with BB Desktop manager requirement
BB Bold 9700
Device updated today 1/31 Should be a warning that this process takes a l o n g time
BB Desktop Software Rev 5.01
Upgraded from Bold 9000 and backed up device using BB Desktop Software
Can't restore photos from old BB to new BB using media manager because the netbook I use has a max resolution of 1024 x 600 and the media manager SW requires 1024x768 resolution. (Why does it care?)
Any suggestions on how to make it work?
lateralus wrote:
stingray wrote:
Misfit138 wrote:IIRC, the SiS driver is quite limited, and only offers 2d.
Thats what I expected to hear...
Are you 100% sure? I just run glxinfo and it says:
direct rendering: Yes
And I'm confused. Are there any chances of getting compositing to work on SiS card in this case?
I'm not the expert here, but compiz can work with indirect rendering, so I don't think that's the qualifier for if it works for your system.
Similar Messages
-
Phone is and has continued to display "this accessory is not optimized on this I phone... It flashes on the screen continuously even when phone is locked, wasting battery life in the process. I could understand if I had used a dodgy charger but I have only used the charger I got with my iPhone. And it has been happening since the first time I charged it. Also the keyboard sounds go on and off when I'm typing, any ideas. Cheers.
Hi,
Not that's not normal and is one of the Problems I was having before Restoring as New...
Just make sure you Sync ALL your important Info... Contacts... Music... Etc... to your Computer...
and then do a Restore as New...
i was a bit reluctant at First, because I hadn't done it before... But it was So Easy and am Really Glad I did...
Cheers,
Here's Another Useful Link:
http://www.apple.com/support/iphone/ -
Hardware accelerated views have been disabled because they are not compatible with remote desktop
Just started getting this error after updating to CC and latest NVIDIA drivers:
I don't run Remote Desktop. After this message appears, the checkbox in my preferences is disabled:
If I reboot my computer, the checkbox is again enabled, but then the error message about the remote Desktop appears, not right away, but after several minutes.
Details:
Windows 7 Pro
Intel i7 CPU X980 @ 3.3GHz
24GB RAM
GeForce GTX 680, Driver 320.49
AE CC 12.0.0.404
Thanks for any help.Currently running apps:
Firefox
Chrome
TextPad
Adobe Prelude
So, as a test, I did the following:
Launched Adobe After Effects CC.
Looked at "Preferences" -> "Display" -> "Hardware Accelerate Composition......" ... it is enabled
Locked my workstation. [Windows key - L] I don't have a screensaver ... just plain black.
Typed my password to unlock. The dialog box shown at the top of this thread appears.
Closed AE.
Re-launched AE.
The option in Preferences is unchecked, but it is selectable.
So, that is MUCH more convenient thatn having to reboot the machine. Don't get me wrong here ... it's still annoying. It's especially annoying because I developed the (good) habit of locking my workstation whenever I walk away from it. During a typical work day, I may lock/unlock my workstation ten times ... or more. -
My 8320 curve will not connect with the desktop manager
I have just received a new device (bold 9700), and i need to send my contacts from my old 8320 to the 9700.
I read a post about doing it thru the desktop manager, but i have never been able to sync my 8320 to the desktop manager.
How can i make the desktop manager recognize my bb 8320?
thanksYou should be able to use the switch device wizard in BB Desktop Manager. Are you wanting to "sync" or are you wanting to make a backup or transfer info from one BB to another? They are two different things. Can you be more specific? When you plug in the device does DM show the pin at the bottom of the DM screen (or the device picture if using DM6?)
1. Please thank those who help you by clicking the "Like" button at the bottom of the post that helped you.
2. If your issue has been solved, please resolve it by marking the post "Solution?" which solved it for you! -
After moving an entire client folder from an external hard drive to an internal one, the client's video, created in adobe premiere elements 10, will no longer open in adobe premiere elements 10. It appears to be loading the project, and instead of completing, the following error message is displayed: "The project is not compatible with current version of Premiere Elements."
The same thing occurs when attempting to open the archive files.
New projects, and unmoved projects behave properly.
Moved projects receive this error.
I'm running Windows 7 Home Premium SP1 on a solid state drive (SSD) (c:/), where premiere elements is installed
My documents, including the project I need to work with are on my "storage" drive (HDD). it is (f:/)txnoda
Archiving Aspects of this.....
First let clear the matter of the "archiving" as a life saver.... We do not appear to be on the same wave length.
a. I am talking about File Menu/Project Archiver with its Archive project and Copy project options. This feature is a safety net to save you when you
inadvertently disconnect source media from the project file. With the Archive option (Trimmed Folder result), you get saved to the computer hard drive (safe keeping) a copy of the project file plus copies of the media that were taken to the Timeline. With the Copy option (Copied Folder result), you get copy of the project files plus copies of much more.
b. Instead, you appear to be talking about "archiving" in the context of AutoSaves. AutoSaves are saved snapshots of the project at various phases of the edit. They suffer from the same shortcomings of the original project that has been disconnected from its source media.
When you import media into a project, all you get are copies of the originals in the project. But, those copies need to trace back to originals at the locations where they were when first imported into the project. Moving, renaming, deleting files/folders that went into the project after the project save close leads to some very time consuming messy situations.
What to do....
If you can, put everything back the way it was. If not.....
Let me emphasis some factors..
You wrote
After moving an entire client folder from an external hard drive to an internal one, the client's video, created in adobe premiere elements 10, will no longer open in adobe premiere elements 10. It appears to be loading the project, and instead of completing, the following error message is displayed: "The project is not compatible with current version of Premiere Elements."
Here you mention specifically "client's video". Later you detail with .mod files converted to .avi. What kind of .avi? If you have converted to AVCHD.avi or H.264.avi, they have been found not to be compatible with Premiere Elements. You should not be able to import them into any new or old project.
From what you described, I am envisioning
"Video" Folder
which contains 2 folders named
"Timestamped Folder" with .avi files
and
"DVD" Folder with the project file (project.prel)
The project file has many files generated automatically in the course of it workflow. Where do you have them going?
(See Premiere Elements 10 Edit Menu/Preferences/Scratch Discs). If you have the Scratch Discs directed
"Same As Project", then we would expect all those files to be going to the DVD Folder in the above scenario.
If we could open the project and get greeted with some "Where is the file.....?" messages, that might give us some hope.
But that is not the case.
Consequently from what you have said, I am suggesting that the path of least resistance is try to recreate the "before".
Please review and consider.
ATR
Add On...Not sure if it will assist in the matter, but the following is the link to Adobe's document related to troubleshooting
damaged projects.
Troubleshoot a damaged project file | Adobe Premiere Elements -
CS6 not compatible with mac retina display
I recently purchased the Adobe CS6 Design and Web Premium at school. (It's not the creative cloud)
Upon installing, I noticed that all of the programs are blurry. After a quick google search, it says that when a program is blurry it's not compatible with retina display.
I did an update on all the programs, and it seems like only photoshop and illustrator were updated to have retina display. The only other program I really need to be retina compatible is InDesign. I don't care about dreamweaver and such.
Anyone knows if there is an update for coming for that? Any work arounds, or who I need to contact to see what they can do? I spent a ton of money on this, and was not aware that there was a retina display issue, and my software is obviously now non-returnable.There is nothing more to do. CS6 is now 3 years old and there simply won't be any further updates, be it just for simple technical reasons.
Mylenium -
My backup is failling to restore and displays an error message: backup either corrupt or not compatible with the device. This happened after updating to the latest software IOS7
I have the same issue and I KNOW my backup IS good. What happen is when you try to restore your phone apple says something like can I check for new updates and if you choose no, it just takes you back to the restore screen and a loop from then on. If you dont update from you phone then when you back up you will have the 5.0.1 back up and then when you update to 5.1.1 and then try to restore the backup from 5.0.1 it say it EITHER corrupt or incompatible.. It is incompatible and its hard as **** to restore back to 5.0.1. I followed the restore to a T and still getting errors. I lost all text history and have to reset up email. All just because I wanted a 1.2 Gigs of "other" space back.
-
Elements 12 is not compatible with newer high definition, high resolution screens.
After many, many hours of troubleshooting on my own, asking questions and time on the chat, Adobe finally told me that Elements 12 is not compatible with my screen. No apology, no offer of refund, no indication when a fix might be available.
Looks like it exceeds PSE 12 System Requirements.
http://www.adobe.com/products/photoshop-elements/tech-specs.html -
Currently using Firefox 3.6.17
Operating system: Windows 7 64bit
Flash 10.2 r159Seems like no answer after 2 weeks... Well i ask a question, i answer to a question.
Found workaround for that problem.
# Open up the about:config page (type it in the address bar and enter) and then right-click anywhere in the about:config page and choose New –> Boolean.
# Write extensions.checkCompatibility.4.0 and make it false.
What it does, is disables automatic compatibility checking from firefox, so you could still use your older add-ons that are not compatible with firefox 4.
Got that info from here:
[[http://www.nirmaltv.com/2010/07/08/how-to-make-incompatible-add-ons-work-in-firefox-4/]] -
Help! My display driver is no longer compatible with Adobe software!
Help! I rely on Adobe CC and my iMac to earn my living. My display driver is no longer compatible with Adobe software! What should I do? (most affordably because I dont have enough money for even basic living expenses right now.) Detailed notes are below but in a nutshell, I have a NVIDIA GeForce 8800 GS display driver. Adobe no longer supports it and disables the software functions depending on the graphics hardware. It recommends I check the manufacturer's website for the latest software. I did but only found firmware update for a different type of display driver for my early 2008 iMac. What should I do??! Please help me solve this!
Note from Adobe:
http://helpx.adobe.com/photoshop/kb/photoshop-cs6-gpu-faq1.html
Adobe: “Note: AMD/ATI 1000, 2000, 3000, 4000 series, nVidia GeForce 7000, 8000, 9000, 100, 200, 300 series and Intel HD Graphics (First generation) cards/GPUs are no longer being tested and are not officially supported in Photoshop CC and CC 2014. Some GL functionality is available for these cards, but it's possible that newer features don't work.”
I have an early 2008 iMac:
Hardware Overview:
Model Name: iMac
Model Identifier: iMac8,1
Processor Name: Intel Core 2 Duo
Processor Speed: 3.06 GHz
Number of Processors: 1
Total Number of Cores: 2
L2 Cache: 6 MB
Memory: 4 GB
Bus Speed: 1.07 GHz
Boot ROM Version: IM81.00C1.B00
SMC Version (system): 1.30f1
Serial Number (system): YD*****N4
Hardware UUID: D42002AC-A757-51C0-8D5D-333AD24D3DF9
My display driver:
NVIDIA GeForce 8800 GS:
Chipset Model: NVIDIA GeForce 8800 GS
Type: GPU
Bus: PCIe
PCIe Lane Width: x16
VRAM (Total): 512 MB
Vendor: NVIDIA (0x10de)
Device ID: 0x0609
Revision ID: 0x00a2
ROM Revision: 3234
Displays:
iMac:
Display Type: LCD
Resolution: 1920 x 1200
Pixel Depth: 32-Bit Color (ARGB8888)
Main Display: Yes
Mirror: Off
Online: Yes
Built-In: Yes
Note from Adobe:
http://helpx.adobe.com/photoshop/kb/photoshop-cs6-gpu-faq1.html
Adobe: “Note: AMD/ATI 1000, 2000, 3000, 4000 series, nVidia GeForce 7000, 8000, 9000, 100, 200, 300 series and Intel HD Graphics (First generation) cards/GPUs are no longer being tested and are not officially supported in Photoshop CC and CC 2014. Some GL functionality is available for these cards, but it's possible that newer features don't work.”
<edited by host>If you decide to use up to the minute applications, you will have to accept that the computer and operating system will eventually be incompatible with your chosen application as the features in the latest application rely on new hardware and operating systems to support them.
Your options are to either use a newer Mac or use a version of Photoshop that will run on your Mac. -
File is not compatible with this version of Photoshop.
I have seen several other posts with this same issue but have not been able to find/see any resolution. I am trying to open a .psd file and receive the error:
In case the image above does not display "Could not complete your request because the file is not compatible with this version of Photoshop."
Of course, this file is an "Approved Design" for a client and will take days to rebuild. All of the other files I worked on during the same time period are just fine.
I have tried:
Deleting Preferences
Clearing Preferences
Setting to "Ignored EXIF profile tag"
My System Specs:
Intel XEON E345 @ 2.33GHz (Dual)
12.0 GB RAM
64-bit Windows 7
Photoshop is set to use 7780 MB for RAM (71%)
I have 4 disks assigned for scratch disk access and my OS drive is not the primary scratch drive, total of close to 500GB space for scratch.
PLEASE, please, please help!! I hope there is a way to repair/get this file open....Generally speaking, Photoshop is not known to destroy files. The problem, as implied above, is more likely a basic problem with your computer.
You can check your Windows event logs to see if you find disk errors.
-Noel -
Mountain Lion not compatible with Macbook Pro
Hi,
My Macbook is not compatible with Mountain Lion. I am running Snow Leopard 10.6.8. Why?
Could you please tell me why and what to do about it.
Thanks,
Anne
Hardware Overview:
Model Name: MacBook Pro
Model Identifier: MacBookPro2,2
Processor Name: Intel Core 2 Duo
Processor Speed: 2.16 GHz
Number Of Processors: 1
Total Number Of Cores: 2
L2 Cache: 4 MB
Memory: 2 GB
Bus Speed: 667 MHz
Boot ROM Version: MBP22.00A5.B07
SMC Version (system): 1.12f5
Serial Number (system): W8xxxxxW0K
Hardware UUID: 00000000-0000-1000-8000-0017F2D7544A
Sudden Motion Sensor:
State: Enabled
ATI Radeon X1600:
Chipset Model: ATY,RadeonX1600
Type: GPU
Bus: PCIe
PCIe Lane Width: x16
VRAM (Total): 128 MB
Vendor: ATI (0x1002)
Device ID: 0x71c5
Revision ID: 0x0000
ROM Revision: 113-xxxxxx-158
EFI Driver Version: 01.00.158
Displays:
Color LCD:
Resolution: 1440 x 900
Pixel Depth: 32-Bit Color (ARGB8888)
Main Display: Yes
Mirror: Off
Online: Yes
Built-In: Yes
Display Connector:
Status: No Display Connected
System Software Overview:
System Version: Mac OS X 10.6.8 (10K549)
Kernel Version: Darwin 10.8.0
Boot Volume: Macintosh HD
Boot Mode: Normal
Computer Name: Anne Maurer’s Computer
User Name: Anne Maurer (annemaurer)
Secure Virtual Memory: Enabled
64-bit Kernel and Extensions: No
Time since boot: 37 minutes
Thanks,I can't tell you why, but I can tell you that Apple published the list of supported hardware on its website quite a while ago. The oldest MacBook Pro model that supports Mountain Lion is the Mid/Late 2007 model. You have the late 2006 model.
Details are (and have been) here:
http://www.apple.com/osx/specs/ -
I downloaded CS6 and am having issues with my print driver. It is not compatible with the HP 2600n and have tried to download drivers given to me by adobe ( (Jupiter 3) but it is not working. after a few days. Its a temporary fix and is still looking for the HP driver when i boot up. It also will not save in any print or postscript format. Does anyone know how to fix?
Currently use a Mac with the latest Mavericks 10.9.4Oh boy! Acting kind of weird seems to be an understatement, aquaequus!
What type of troubleshooting were we able to do with you? I want to make sure that we can get some sort of resolution for this problem.
It is quite possible the battery door may get your phone in working order again. I'm not sure if the store has it in stock, but it is available in our warehouse for $14.99 which can be ordered via customer service.
Tamara H.
Follow us on Twitter @VZWSupport -
IPhoto not compatible with OSX Yosemite
I have a MacBook Pro (17 inch, early 2011) with a 2GHz Intel Core i7 and 4 GB 1333 MHz DDR3.
A few weeks ago I downloaded the Yosemite operating system (10.10.3). Since then, my iPhoto application will not open. I can't save pictures to my computer from my phone and I can't edit pictures I've imported. When I try to open iPhoto, it says: "In order to open "iPhoto", you need to update to the latest version. The version of iPhoto installed on this Mac is not compatible with OS X Yosemite. Download the latest version for free from the Mac Apple Store."
I search the app store for iPhoto and no updates are available. The message displayed is: " The item you've requested is not currently available in the US store."
Anyone know what to do to solve this? I really need to be able to edit photos. Thanks for helping!You need iPhoto 9.6.1 for use with 10.10.3. Try the method Terence Posted in this topic to get it from the App Store:
Terence Devlin including Apple logo changes for feature 126 Apple image including Apple logo changes for feature 126 Apple image ends here
Apr 14, 2015 11:21 AM
Re: Is Iphoto gone ? i want it back!
in response to Johannes666
Recommended
[DocumentBodyStart:d25bf602-029a-4466-b895-2ab6c98bb4c9]
Go to the App Store and check out the Purchases List. If iPhoto is there then it will be v9.6.1
If it is there, then drag your existing iPhoto app (not the library, just the app) to the trash
Install the App from the App Store.
Sometimes iPhoto is not visible on the Purchases List. it may be hidden. See this article for details on how to unhide it.
http://support.apple.com/kb/HT4928
One question often asked: Will I lose my Photos if I reinstall?
iPhoto the application and the iPhoto Library are two different parts of the iPhoto programme. So, reinstalling the app should not affect the Library. BUT you should always have a back up before doing this kind of work. Always.
Otherwise you can drag your iPhoto Library onto the Photos app icon in the Dock to covert it to a Photos library. -
I download Firefox 4.o and drag to app folder then to dock. When I double click on the dock icon I get a message the forefox is not compatible with this version of OSX (which is OSX10.4.11). What gives?
Firefox 4 requires at least OS X 10.5 and an Intel Mac. You can get the latest version of Firefox 3.6 from http://www.mozilla.com/en-US/firefox/all-older.html
Mozilla are working to prevent Mac users with non-compatible systems from getting the notification about Firefox 4, and also not displaying the "Download Firefox 4" button on http://www.mozilla.com
Maybe you are looking for
-
Shut down system only to get a white screen with the apple logo then shuts itself off. Have put in the disk to check the hardware and it says no problems found, so I put in the OSX install disk and ran disk utility on Macintosh HD -first aid. It stat
-
Strange flickering lines across screen, opening Photobooth makes them go away?
Hi everyone, I've been having a very strange problem with my 2011 Macbook Pro 15" for quite a long time now. It's basically flickering lines across the screen, and the screen 'folds' in on itself, squashing the display vertically and stacking them on
-
Loading an external movie clip
Hi team, Last time I wanted to load an external clip I could do it like this on (release) { unloadMovieNum(1); loadMovieNum("whatever.swf",1); So now I want to achieve exactly the same thing in AS3, I have been looking at exampl
-
Has anyone experience their Airport slowing the download speeds?
-
Using JavaScript / Custom function in ACTION_BEFORE_RENDERING
Hi I need to include some of my own text in the print output of a template. On the template, I can include a text item, and include that text item in the print output. The problem, however, is that when printed, the text item's initial value is in th