Display role for all transactions

Hi,
We want to create a role with all transactions, but display only. (Same as SAP_ALL with display access only)
I have read previously posted messages in this forum, but didn't find the solution.
The SAP_ALL_DISPLAY role was available prior to 4.7. But we want to create role on WAS 6.4 onwards.
Does anyone has solution for this?
Regards,
Prasad
Message was edited by:
Prasad Musale

> Hi Alex,
>
> >>I fail to see a valid situation where users that
> need to process transactions in production >>should
> have access to execute every transaction, even if in
> display mode.
>
> We have the development system. We are separating the
> responsibility based on business functions such as
> FI, MM etc. it may possible that FI consultant may
> require a display access to transaction from MM. In
> this case MM consultant will have MM roles only, but
> will have the display all role. So that he can
> perform his functions smoothly.
>
>
> The solution you gave is working, but it does not
> serve the purpose.
> Any other solution?
>
>
> Thanks,
> Prasad
Hi Prasad,
My response was to Rajeswari's question rather than your situation which I appreciate is different to the one he was talking about.
Creating a display role based on SAP_ALL with all activities set to display mode takes around 2 hours, it sounds like it would be worth your while creating it from scratch, though I appreciate that it is a tedious task!
By using a display role in this manner you will still have the potential for access to functions that are controlled by shared objects, however the risk is reduced unless you give them access to debug & replace.

Similar Messages

Display Authorisation for ALL transaction ....

Hi Experts,
Our companys wants full authorisation ( sap_all + sap_new ) for Auditors but in Display Mode only.
What I did, I created Z_auditor role and selected all logistic ( Not Tools ) and in authorisation S_TABU_DIS I kept only display.
But in many transaction i seen that there is create, change option available.
Pl. guide us what to do, urgent ?
Yusuf

Please DO NOT try to create SAP_ALL_DISPLAY.
There are standard roles for auditors which should be a great start for your roles.
Please look at http://service.sap.com/ais , there you'll find lots of information about the Audit Information System.
Auditors are used to this, usually.
Hope that helps,
Frank.

Profile Option: HZ: Display Accounts for All Operating Units

I just noticed this profile option, but cannot find any documentation stating what it does. Does anyone know? Offhand, it sounds like the customer account is now org-striped, in addition to the sites, but I don't see any other evidence of this.
Thanks.

Have you looked at note 369821.1.?
It says,
If you want to review all of the Quotes for all organizations then you need to set the profile "HZ: Display Accounts for All Operating Units" to "Yes" at the site level. After that you will be able to see all the transactions in OCO for all organizations. Sandeep Gandhi

Standard Display Roles For Queries in BW

Dear All,
Could you Please share the Standard Display Roles For Queries in BW.
Thanks
Regards,
Sai

Hi Sai,
You can find query specific roles in metadata repository.
Also try this table in
SE16. AGR_OBJ
Other useful tables might be:
AGR_DEFINE -      Role definition
AGR_USERS -      Assignment of roles to users
AGR_HIERT           Role menu texts
AGR_AGRS           Roles in Composite Roles
If you need to find user specific roles, check Tcode SUIM.
Hope this helps.
Thanks

OTL: Timecard Audit Template require reason code for all transaction.

We are currently using OTL with CLA template with interface time entry from external system.
When monthly time entry interfaced into OTL each employee have to review and update their time and submit to manager, but when process to audit template they has been forced to update reason code for all transactions.
We suppose to update the reason code only for the modified transactions. Please help me.
Nonny.

nondhasid,
If you are not modifying those records which are asking for a reason field to be filled, then it should be coming from the Late setup. Check the CLA setup.
--Shiv

Numbering series for all TRANSACTIONS

hello gurus,
Normally, in SBO system continues with the same numbering series for all Transactions.
my question is : is there a option to create new numbering series for the TRANSACTIONS.
thank you .

Hello,
It is not normal for B1 that uses the same numbering series for all Transactions. Only if you have selected this option, you would get this results. However, this option may not be changeable if you have posted transaction already.
Thanks,
Gordon

Display authorization for all modules Including Basis.

Hi All,
Is there any Role or profile for display authorization for sap modules .
Regards,
Eswar.

Dear,
That ROLE will be SAP_ALL_DISPLAY
"what is to be done"
just assign the role to the display user via SU01
Hope this help!
Also refer this ,
DISPLAY ONLY AUTHORIZATION
Regards,
R.Brahmankar

How to create SAP_ALL Display Role without HR Transactions.

Hi,
Can someone help mem create an SAP_ALL Display only Role without HR Transactions.
It takes lot of time to create a New role with SAP_ALL Template and manually change the Activity to display and de-activate HR Objects.
Please let me know if there is any faster way to do this.
Regards,
MASQ.

> Please let me know if there is any faster way to do this.
Nope, there isn't. Besides that, only changing activity fields will not result in a display-only role. As said, please use the search and browse through the sticky threads.

Blocking a company code for all transactions.

A compnay code is having two plants assigned. No open documents in that company code.
How to block the company code for any transactions including purchase document creation?
However all the past data to be available for viewing and reference.
Thanks in advance.
Narasimharao

Dear Narasimharao ,
You can remove authorization from user profile to use this company code.
And when someone try to save any documents , error message will be send.
hope this could help you.
best regards,
Carlos Moçatto

Funds Management for all transaction

Hi
I have activated funds management. I want this only for checking budget for non-assigned PO.
But it will ask comittment items for all business transactions like FI / MM / SD,etc
What settings needs to be done for the same so that other transactions are affected. Please help

Hi,
Bear in mind that the minimum account assignment that must be provided in case of FM, is funds center and commitment item, this is required for postings, budget, avc and so on.
Funds center can be a combination of cost centers that you should have filled in your PO.
To be able to derive automatically funds center from the cost center, use FMDERIVE transaction creating a derivation rule that connects cost centers to the funds centers.
The FM derivation tool can only be used for deriving Funds Management account assignments. Additional information is
available in note 881202.
I suggest you to read also the documentation available in the following menu:
SPRO -> Public Sector Management -> Funds Management Government -> Prepare Funds Management Installation
It is only a text document but with links and with all the necessary instructions to start FM in your company.
I hope that this helps you.
Best Regards,
Vanessa.

How to display details for all figures at once

Hello all,
I have a report that shows the number of different notifications per month. The user enters a month and a twelve months timeline (counted back from the entered month) is displayed with the number of different notifications for each month. Additionally I have created another query that shows the details for the first one.
However I wanted to know whether it is possible to get the details for all displayed figures at once?
Currently it is only possible to display the details for one single row (which means one single month from the timeline) or single values. Is it possible that the user can click on any figure (or that he has an additional button) and gets all details?
Or elsewise how can I transfer only the user-chosen month from the first query to a detail query and not the one that he selects from the displayed values.
I hope you can help me with this.
Best Regards
Fabian
Edited by: Björn Rose on Mar 12, 2008 11:29 AM

Hello Fabian,
You can use User Exit to get the User Selected value and Choose only the month from that and pass it to the other query. The user exit has to be written in the reciving query.
Thanks
Chandran

Changes like password and removal of roles for all users

Hi
i want to change password for all users and remove single roles from all users.When i am doing this in SU10 changes are not reflecting for users.Please help reg this
Vinod

Me too...I have never been able to remove roles from multiple users with SU10. I don't know if it's a bug or (more likely) just a confusing screen, but in 4.7 it never worked for me.

Blocking Vendor for All Transactions

Hi all,
I have activated sensitive fields for vendor master creation and change. When there is a change in predefined sensitive fieldsu2019 vendor is blocked until confirmation. But my problem is I can still open PO for these blocked vendorsu2019. Shouldnu2019t it be blocked for any transaction such as opening PO or invoice verification? Until vendor changed is confirmed by superior it has to be blocked. How I could achieve this. I would like to hearing from you.
Thanks
Melih

hi,
You can't stop looking the documents for that vendor, just because even if you see you can't post the document again as the procurement from that vendor has been stoped..
for eg : So if you block the vendor even if the PO is visible, it is not possible to have any further procurement from them, and system will show a error message that the
vendor has been blocked.
So there is no need to worry abt it...
Hope it anwers your query
Regards
Priyanka.P

Script to Grant Role for All User Objects.

Hi DBAs,
I have created a select_only role. I need a script to populate that role with all user_objects belonging to one person and eventually grant that role to another person. Perhaps a dynamic sql.
Please help.
Thanks
-Samar-

Samar,
Please see if the following documents help.
Note: 18080.1 - Script to Create Roles
Note: 174138.1 - How to Tranfer all Roles and Grants to Another Database
Note: 729428.1 - Script to create roles & apply grants from database A to B
Regards,
Hussein

Screen Varient for All transaction codes

Dear Friend's
My business need to display the following fields ,while posting the transaction through all FI transactions.
1.Settelement Period
2. Ref.speification 1/2.
I have gone through the OBC4 and modified but Settlement period apperead and not on scrren ,it is in more data.
Please suggest how can i retrieve that settlement period on line layout from more data.
Moreover Ref.specification key also couldn't appear Y?
Thanks for advance
ManiKumar

It is not possible to keep the field you asked from additional data to main screen.
If you really require that, ask your abaper to copy the program & create a new zscreen program and design the layout.
ask ur client to use instead of main transaction.
As per my knowledge, this is the only way as I faced this kind of problem earlier.
reward points if useful
--chaitanya

Display role for all transactions

Similar Messages

Maybe you are looking for