Display rotated from cat walking on keyboard

So...I have Windows on my MacBook, through Boot Camp. I was on Windows this morning when my cat walked across the keyboard, magically pressed a few buttons I assume and the display is sideways now.
I can't figure out how to get it back. It's not sideways in Mac. Just when I shut down and open Windows again. Are there a couple of keys that can be pressed together that can put it back?
Thanks.

You might check the following link for help in this matter.
I can't make my screen rotate using Vista within Parallels. From the link, it appears that this is only an XP option.
[ROTATE|http://internetducttape.com/2006/08/01/stupid-windows-features-monitor-d isplay-turns-sideways-or-upside-down>

Similar Messages

  • My imac screen display is unfocussed, odd coloured and blurred (caused by rogue cate walking over keyboard).  I have no idea what settings have changed or what to check.  Any ideas?!

    My imac screen display is unfocussed, odd coloured and blurred (caused by rogue cate walking over keyboard).  I have no idea what settings have changed or what to check.  Any ideas?!

    It could be a number of keyboard shortcuts, here's a few.
    If the screen is zoomed,  hold CNTL and scroll down with mouse or trackpad.
    If screen looks like a negative,  hold down CNTL OPT CMD and click 8.
    Let us know how what other symptoms are shown.
    Regards,
    Captfred

  • I have a macbookpro with a second monitor connected using an Apple connector.  The two screens show different parts of the desktop.  My cat walked across the keyboard, and now the two monitors are showing the same thing.  How do I undo what the cat did?

    I have a macbookpro with a second monitor connected using an Apple connector.  The two screens show different parts of the desktop.  My cat walked across the keyboard touching various keys, and now the two monitors are showing the same thing.  How do I undo what the cat did?

    Have you tried HELP in FINDER?  If you open HELP and enter 'displays' in the field in the upper right hand corner you will get a list of topics on setting up monitors.  Specifically read 'Setting up multiple displays to show the same image' and 'Setting up multiple displays as an extended desktop'.
    Ciao.

  • My cat walked on my keyboard and now my task bar will not stay up.  F3 brings it up, but it wont stay.

    My cat walked on my keyboard and now my task bar will not stay up.  F3 brings it up, but I would like it to stay up.

    This whole deal reeks. I do not know where you got your product from, but that's not how Adobe Photoshop works.
    Go here first: Contact Customer Care
    That is the official contact.
    Contact Customer Care by chat or Phone.
    If the website you went on is not www.adobe.com, close the browser.
    If the number is for a "survey" to "win a trip", hang up. It's a scam to get your credit card in order to "secure" the trip.

  • How to set "display mode" from external keyboard

    I have an EliteBook 8570p in a docking station, with an external monitor and keyboard attached.
    I typically have my display mode as "duplicate", with the same thing  showing on both my laptop screen and external monitor.  I use the external monitor as the main screen. This might be uncommon, but I prefer it this way.  I've been working this way for quite a while.
    I very recently started using MS PowerPoint 2013.  Today I discovered an annoying bug with this combination.  I was in "slideshow mode" for a pptx I was working on, and I pressed ESC to get back to editing the doc.  What happened was that the external monitor just showed my background wallpaper, and the laptop screen showed the normal display, along with my background wallpaper.  I then had to slide over to my laptop keyboard and press Fn-F4 and set it to "Duplicate", and that restored my external monitor display.
    I'm definitely going to pursue this weird behavior with PowerPoint, but I'm going to assume out of the box that this will be difficult to change.  What I'd like to get from this forum is simply a quicker way to restore the "Duplicate" display mode.  Is there a keyboard shortcut I can use from my external keyboard to change the display mode?  There's no "Fn" key.

    Although I'd still like to get an answer to this, my original problem has been solved, as I was able to disable the feature in PowerPoint 2013 that mucked with my display mode (turn off "Use Presenter View").

  • Suddenly I can't record after the cat walked across the keyboard. What could have happened?

    Suddenly I can't record after the cat walked across the keyboard. What could have happened? Teeny bit of signal to the meter.

    Mate ignore these Pet Detectives
    This is NOTHING to do with your mac
    Your Cat5 Ethernet cable prObably got knocked

  • Solaris10/amd64 and Xorg display rotation using Nvidia 5200 driver

    Hello,
    in both XFree86 and in Xorg X11 implementations, the driver for Nvidia cards include support for display rotation which is quite nice feature having display which support it. I like it in linux and also would like to give it a try in Solaris10/amd64 which I'm tryint to use as a developer system now, but unfortunately I'm not able to find out where the configuration file(s) for bundled Xorg resides, or at least from looking into "top" utility I see process Xorg which I assume is Xorg's X server. My other assumptions are that if using Xorg, then Sun also uses Xorg's drivers and also Xorg's configuration -- if this is not true, please correct me.
    Thanks!
    Karel

    The Xorg configuration file is /etc/X11/xorg.conf but does not exist by default, instead autoconfiguring on startup. To generate a configuration file, do a command line login as root and run /usr/X11/bin/Xorg -configure.

  • Tecra S11 - Display display rotation on hotkey

    Hi all,
    I'm using a Tecra S11 with Windows 7 64bit.
    By pressing "crtl + alt + down-arrow" my display rotates 180 degrees.
    Unfortunately this hotkey is one of my favorite hotkey in Eclipse, so I need to disable the display rotation hotkey.
    after a long time searching I havent found a solution.
    does anybody know how I may disable the display rotation hotkey ?
    Thanks for any tips
    Regards

    Hi All,
    after spending some hours of searching in the internet for a solution for my problem I actually found a solution for it.
    @Horwath
    Thanks for your tip with the 'graphic card settings' but unfortunately this didnt solved the problem.
    After using the "Process Explorer (Sysinternals)" an taking a detail look on what's happening while pushing the hotkey I found out that there is an special utility from toshiba which executes the monitor rotation.
    This utility is named: "TOSHIBA 180 Degrees Rotation Utility". After removing it over the system control, the hotkey was not bound anymore and the system behaves as expected.
    And if I need "monitor rotation" anytime again, Ill use the nVidia control panel.
    best regards

  • Help, how to open and display blobs from tables

    Dear all,
    I am trying to store ms-word files on a table using a blob column.
    Does anyone how to open the files and display them from a form using 9iAS?
    Thank you.
    Carlos.

    And there may be, but you won't likely find that here. Do some time searching Google and maybe you'll find code that someone was nice enough to make freely available, although I wouldn't count on it. Were i a programmer and took the time to read those docs and write the code, I'd want to be paid for my time. But there are a lot of programmers who swear by freeware! You may get lucky.

  • Display reports from BW using WAD on blackberry

    Hi All,
    I have to display reports from BW using WAD on blackberry
    can any one please guide me how to do it?
    awaiting Reply
    Thanks & Regards
    Prasad

    you have to integrate SAP Mobile infrastrcture with BW system to achive this.

  • Displaying jpegs from folder

    Hi,
    I would like to display jpegs from a folder, and be able to somehow scroll through them?
    So far i have been able to display them by using listfolder and linking it to a for loop containing readjpeg, but this basically creates a slideshow of jpegs. I would like to control which jpeg is being displayed by having 2 buttons, one to go through the pictures, and one to go backwards. .
    I hope this makes sense, I'm new to LabVIEW.
    Any help would be greatly appreciated!
    Attachments:
    VIEW_JPEG.vi ‏14 KB

    here is one simple possibility. 'hope it make sense.
    LabVIEW Champion . Do more with less code and in less time .
    Attachments:
    VIEW_JPEG_MOD.vi ‏22 KB

  • Displaying fields from a Z Table on CRM UI

    Hello Experts
    I am trying to display fields from a custom table onto a CRM UI form view.
    1. I created a custom GENIL root object & Search object ie. ZCUSTOMER. & ZCUSTSEARCH
    2. Tested this in the GENIL BROWSER to ensure that I could enter update values to the table and retrieve it via the search object.
    3. Created a custom component ZCUSTOMER
    4. Created a view with this component ZCUSTOMER using the wizard -
         Model Name - CUSTINFO
         BOL Entity - ZCUSTOMER
         No links to the custom controller or higher level objects.(as I do not want to tie this to any standard components)
    Type of view - Form view
    7. Created a Context node for the component controller with the same info as I did for the view.
    8. Performed the binding of the view context node with the component controller context node.
    9. Configured 1 field CUST_NAME to be displayed on the view.
    10. Configured the run time repository to display the view.
    Now the issue is..
    When the view gets displayed, the field is displayed with the error "CUST_NAME not bound"
    What am i missing?
    Thanks
    RLX

    Hi Swati,
    Thanks for the feedback. I re-viewed the WD_CREATE_CONTEXT method of the view controller implementation class and I see the following code in there already-
    method WD_CREATE_CONTEXT.
      create the context
        context = cl_bsp_wd_context=>get_instance(
              iv_controller = me
              iv_type = 'ZL_ZCUSTOMER_BSPWDCOMPONEN_CTXT' ).
        typed_context ?= context.
    endmethod.
    Does that look right or do I need to modify it?
    Thanks once again for the help.
    RLX

  • Issue with display data from infoset

    Dear Experts,
    When I am trying to display data from BI INFOSET in (Execute in background ctrl+F2)backend it is working fine but when in try to run the execution in forground (execute F8) then the system gets hang.. and time out. could any one has this kind of experience. if so kindly let me know do i need to implement any patch or  else which way i can do work to resolve this issue.
    Thanks in advance.
    Mannu

    Hi Krishna,
    I have tried as you have suggested ie. using Tcode RSISET for displaying data but still i have the same issue.
    Could any one post any additional suggestions to follow.
    Thanks in advance,
    Mannu

  • Display data from a virtual InfoCube

    Hi experts,
    When I tryed to display data from the virtual InfoCube 0FIGL_V40, I've got a dump.
    Please help me to solve this problem.

    Dear Akshay,
    Is it possible that the problem comes from R/3 since when I check the extractor 0FI_GL_40 with the RSA3 Tcode I've got the message:
    Errors occurred during the extraction --- Message no. RJ012
    I think that the pb has been solved by switching on the business function "Reporting Financials" . Inthe SAP source System -> TA: SFW5. Turn on Reporting Financials. Then I've no pb while testing the extractor.
    Pb solved.
    Many thanks
    Youness
    Edited by: Youness NAJI on Jan 13, 2010 4:39 PM

  • Display Data from multiple models in one table

    Hi Experts,
    Is it possible to display data from multiple models in one table smltnsly.
    I have created a table dynamically.Now I would like to display data from multiple models... If this possible,can anyone give me a lead as to how to do it..
    Regards
    SU

    Hi
    Your Model Nodes be
    Model1
    ---Output_Model1
    Attrib1
    Attrib2
    Model2
    ---Output_model2
    Attrib1
    Attrib2
    and the value node is
    ValueNode
    ---Attrib1
    ---Attrib2
    Now the coding.
    int size;
    IPrivate<ViewName>.IOutput_mode1Node  node1 = wdContext.nodeOuptut_Model1();
    IPrivate<ViewName>.IValueNodeElement elem;
    size = node1.size();
    for(int i=0; i<size; i++)
       elem = wdContext.createValueNodeElement();
       elem.setAttrib1( node1.getOutput_Model1ElementAt(i).getAttrib1() );
       elem.setAttrib2( node1.getOutput_Model1ElementAt(i).getAttrib2();
       wdContext.nodeValueNode().addElement( elem );
    similar code for Model Node 2
    Regards
    Abhimanyu L

Maybe you are looking for