Display Scaling - menus expand off of screen

The Windows 8 feature Display Scaling at 125% causes all sorts of problems for Muse CC 2014:
Menus will expand off of the screen
Hyperlinks button is disabled
Master Pages are not visible in Plan view
The obvious fix is to change Display scaling:
     a. right click on Desktop
     b. Select "Screen resolution"
     c. Scroll and select "Make text and other items larger or smaller"
     d. Change item size to Smaller or click on "Custom sizing options" and select 150%
This is an onerous work-around, because if your Display sizing was set to 125% that is probably what worked for your eyes.

I would contact the app developer.
The iPad 3 has a higher resolution (2048x1536 @ 264 ppi) than the iPad 2 (1024x768 @ 132 ppi). I assume the app is optimized for the higher resolution.

Similar Messages

  • My new version of Firefox (downloaded automatically) on my Mac displays long paragraphs in emails as a single line, so the end of the paragraph is off the screen. How can I make it automatically wrap to fit the screen?

    Long paragraphs in incoming emails display as a single line, with the end of the paragraph running off the screen. I want to make it wrap automatically to fit the screen.

    For the browser window, just drag it to the top left of the screen (click and hold on the top bar with the traffic lights to drag), then in the bottom right of the window you'll see a rectangle with diagonal hatching. Click and hold on that and drag the window to the size you want.
    Clicking on the green dot at top left will expand the window to fit the screen, clicking it again will shrink it back to where it was (this doesn't work in Finder windows quite the same).
    The menu bar size is set in the bowels of the OS, though there may be third-party applications which can alter it.
    As it's size is relative to the screen resolution, you could try reducing the resolution in System Preferences > Displays to see if that would suit you better.

  • My Screen Expands off the bottom

    Sounds weird, I know, but when I slide to unlock, the regular home screen displays properly for a moment and then expands slightly at the bottom, putting the text under the 4 main icons partially off the screen. And when I press the icon for Safari (and maybe others), it shrinks to the proper size, brings up the new app and then expands off the bottom again. What is this all about?

    You have the Zoom accessibility feature turned on.
    Double-tap using three fingers to un-zoom, and then go to Settings -> General -> Accessibility -> Zoom and tap the Zoom On/Off switch.
    If you have trouble with that, connect to iTunes and click the "Configure Universal Access..." button in the Summary pane and unselect Zoom there.
    See page 223 of iPhone iOS4 User Guide

  • W530 with 64 bit Windows 7: cannot turn off display scaling

    Hello,
    I use a high resolution monitor; therefore, I use display scaling. But for many programs I prefer to turn it off since the display quality is better. For 32-bit programs there is no problem with this: open program properties, then,  Compatibility => Disable display scaling on high DPI settings. However, when I try to do this for a 64-bit program, I find that the corresponding check box is disabled. Does anyone know how to solve this problem?
    Regards,
    bostjanv
    Solved!
    Go to Solution.

    Hello,
    The answer, it seems, is available on the Internet:
    http://windowssecrets.com/forums/showthread.php/135838-Disabling-DPI-Virtualization-for-64-bit-apps
    Regards,
    bostjanv

  • Imac display problem, the resolution seems to be unusual, top bar and all folders on the desktop background is off the screen

    Need help with 21" imac display problem. The resolution seems to be unsual, everything on the desktop background goes off the screen. The resolution is set at 1920 x 1080

    Quit the game and restart the iPad.
    To quit the game - Go to the home screen first by tapping the home button. Quit/close open apps by double tapping the home button and the task bar will appear with all of you recent/open apps displayed at the bottom. Tap and hold down on any app icon until it begins to wiggle. Tap the minus sign in the upper left corner to close the apps. Restart the iPad. Restart the iPad by holding down on the sleep button until the red slider appears and then slide to shut off. To power up hold the sleep button until the Apple logo appears and let go of the button.
    If that doesn't work try this.
    Reset the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons.

  • When downloading application updates, which are over a GB, my MacBook Air keeps logging me out and I have to start the download over.  I have the power settings set to never turn off, and the display set to never go to screen saver.

    When downloading application updates, which are over a GB, my MacBook Air keeps logging me out and I have to start the download over.  I have the power settings set to never turn off, and the display set to never go to screen saver.  Any suggestions?

    I have the exact same problem/situation since a few days
    I have not intalled a program lately.
    Any progress Voratima??
    Software  Mac OS X Lion 10.7.5 (11G63)

  • "Fit screen to full display" and turn OFF "Fit screen in window"

    I like being able to access my 24" iMac from my 13" MacBook Pro using ARD.
    There's one feature that I'd really like but which seems to be missing: I want to "Fit screen to full display" but be able to TURN OFF "Fit screen in window" (that button disappears when you go to full screen).
    In other words, I want to view my iMac's screen at actual pixel size, where the screen scrolls as you move the mouse to the edges of my smaller MacBook screen, but NOT in a windowed mode.  That way I'm maximizing my MacBook screen real estate but not having to strain to read a miniaturized version of the iMac screen.
    I'm assuming this just isn't an option, but if anyone knows of a solution I'd love to hear it!
    Thanks,
    Kevin

    You could always request it as a feature through Apple Remote Desktop Feedback.

  • MacBook Pro Display (window) shifts off the screen when I move my mouse

    With a slight move with my magic mouse, my entire open window will shift completely off the screen with only a part of the window still visible. I have to click on the exposed edge of the window for it to shift back into place. It's only the window of the program that I have open that moves. The dock and the desktop image stays in place. I'm using an HP external monitor now but it was doing this before I hooked up the monitor. I've tried maximizing and minimizing my window but that does not seem to have an effect. Could it be the magic mouse? Thanks in advance for any help.

    Wow. The power of Google is truly amazing. Just a little while ago, my husband was going nuts with our computer. I googled the words 'when I move my mouse to the left, the screen moves to the right'. And, Eureka! What do you think was the first thing that popped up on Google?
    Well, the answer to my question, of course!:P Which led me right to here. It may not have been me that asked the question, but this did answer MY question!
    Apparently this applies to Leopard too. Thanks alot!
    Message was edited by: Linda Schodowsky

  • GPO to set default Windows 7 Display scaling to 125%

    We have some new Windows 7 laptops with 1080P LCD displays and it is a bit hard for the majority of the mostly older users to deal with the smaller menus and text.
    We would like to set the default Display scaling to 125% so it is more readable and menus are easier to navigate and easier click on the X's for the majority of people.
    A minority of users may want the 100% scaling, so we would prefer that the 125% setting is just the default a new user gets at their first login rather than an enforced setting that is automatically reapplied if the user adjusts it.
    How can we use a GPO to change the default from 100% to 125% on these laptops without preventing users from changing it back if they want to?
    It will be easier for us to help a small number of the users change it from 125% back to 100% than to have to help everyone else increase it from 100 to 125%.

    Hi MyGposts,
    According to your description, you would like to deploy GPO which could change the default scalling to 125 without preventing users from changing it back to100%. Right?
    Basded on my research, the changes can be made by using the registry values below:
    [HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows NT\CurrentVersion\FontDPI] "LogPixels"=dword:00000078
    [HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\HardwareProfiles\0000\Software\Fonts]
    "LogPixels"=dword:00000078
    [HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Hardware Profiles\0001\Software\Fonts]
    "LogPixels"=dword:00000078
    [HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Hardware Profiles\Current\Software\Fonts] "LogPixels"=dword:00000078
    [HKEY_CURRENT_USER\Software\Microsoft\Windows NT\CurrentVersion\FontDPI] * This has
    to be deleted if
    it already exists
    [HKEY_CURRENT_USER\Control Panel\Desktop]
    "LogPixels"=dword:00000078
    Note: The above given values are in Hexadecimal. 
    Make the changes as given above and log off and log back in to get Medium settings as mentioned in "Make
    it easier
    to read
    what's on
    your screen" 
    You can refer to the above changing about registry keys and test it on a computer. And then deploy the changes via GPO, for your information, please refer to the following article:
    Configure a Registry Item
    http://technet.microsoft.com/en-us/library/cc753092.aspx
    Regards,
    Lany Zhang

  • Menu opens off the screen vertically?

    I have a component and a button on top of the component which
    opens a Menu. For some reason the flex team coded the menu so it
    adjusts itself horizontally so it doesn't go off the screen from
    left to right but not vertically from top to bottom. So if you open
    a menu at the bottom of the screen the menu and submenu items will
    run off the screen. Does anyone have a fix for this screw up? Flash
    had a similar problem with their menus but seem to have fixed the
    horizontal issue. I've seen several blogs but no solution so if
    anyone can help I would appreciate it...

    Ok, it could be two other things.
    The monitor resolution could have changed. Go to System Preferences > Displays > Display tab > scroll this list of resolutions down and choose the bottom most resolution.
    If that doesn't help you could have another monitor attached to extend the desktop. An additional tab (arrangement) will be present in System Preferences > Displays if that's the case.
    Physically disconnect anything plugged into the mini displayport. The desktop should reset to one non-extended desktop.
    Regards,
    Captfred

  • This mini is operating OSX 10.6.8 and trying to update to Mountain Lion but upgrade stops and a black overscreen displays saying to power off and power on.  The upgrade fails.  What's the problem?

    This mini is operating OSX 10.6.8 and trying to update to Mountain Lion but upgrade stops and a black overscreen displays saying to power off and power on.  The upgrade fails.  What's the problem?

    Hi Fred,
    Could be many things, we should start with this...
    "Try Disk Utility
    1. Insert the Mac OS X Install disc, then restart the computer while holding the C key.
    2. When your computer finishes starting up from the disc, choose Disk Utility from the Installer menu at the top of the screen. (In Mac OS X 10.4 or later, you must select your language first.)
    Important: Do not click Continue in the first screen of the Installer. If you do, you must restart from the disc again to access Disk Utility.
    3. Click the First Aid tab.
    4. Select your Mac OS X volume.
    5. Click Repair. Disk Utility checks and repairs the disk."
    http://docs.info.apple.com/article.html?artnum=106214
    Then try a Safe Boot, (holding Shift key down at bootup), run Disk Utility in Applications>Utilities, then highlight your drive, click on Repair Permissions, reboot when it completes.
    (Safe boot may stay on the gray radian for a long time, let it go, it's trying to repair the Hard Drive.)

  • Presentation starts 5" from the left side of screen and pushes intellegence off the screen to the right.

    The top of my screen is normal: the tool bar starts "File, Edit...
    The body of the screen while running Firefox-and during typing of this message- is full of lite. The actual data: starting from the top of this page- "Firefox Help... Ask a new..." etc. starts 5 1/4 inches from the left of the page.
    It's as if Firefox were presenting a wider page with the presentation moved to the right. This pushes the last, normal, 5" of the presentation off the screen.
    The rite end of the bar which starts out: http://www.mozilla.com/en-US/firefox/fx/
    is off the page, so the facilities at the rite end are lost.
    Any presentation, including Amazon.com and Youtube.com are similarly pushed off the rite side of the screen by 5".
    I have no access to the rite-most 5" of any internet presentation.
    The sliders that move the presentation up and down and left/ rite are off the screen.
    I have shrunk the display down so small, i can barely see the numbers: Control panel\ display \ settings \ 1920 by 1200. This gives the ILLUSION of centering the presentation, but still no sliders. At this setting, i can see the full width of Amazon. Youtube appears centered, with 4 1/4" on both left and rite, but no edge sliders.
    I dropped the 'setting' to 1440 x 900.
    Lost about 3" off the rite side of Amazon; barely on the rite edge of Youtube.
    None of my local programming has a problem: Excel, pictures, videos, Word, even Internet Explorer goes full page and centered.
    I un-installed Firefox and downloaded it fresh. It did NOT ask me to reboot my puter, so i didn't .
    I can supply pictures (screen shots) of the phenomenon on request.

    - Open Firefox -> got to Help Menu -> select "Restart with Add-ons Disabled"
    Firefox will close then it will open up with just basic Firefox. You can enable the Add-ons later. Check if its working.

  • Save as dialog box expanded to full screen, edge arrows flicker and will not pull the edges in.

    This problem presented itself out of the blue. The Save As dialog box expanded to full screen, and although the arrows that appear when the mouse cursor is over the edge of a window are present, they flicker and do not grab the edge to pull it in. Every other window on the computer does not have an issue like this. Restarting Firefox or the computer does not eliminate the problem. I am hoping that there is a settings file somewhere that the numeric value for the dialog box size can be changed, since I do not want to completely reinstall the browser.
    As a side note, if the browser has been running many downloads for a while, it will usually start failing to display information, and eventually will get to a point where the Save As box flickers for an instant and disappears and the entire browser becomes unresponsive for an hour or more. Downloads continue (including the one that it froze up on, albeit as a randomly named file in User...Temp), but it is not possible to restart the browser until the downloads complete (which in some cases can be several hours). Usually I revert to using IE11 until I can restart Firefox.
    Perhaps one of my strongest dislikes of Firefox though is the issue with its resistance to copy and paste operations in the Save As dialog box. Most websites offer files with cryptic and even identical names for different files, so renaming files is a critical operation if one is to keep track of and later identify the files one has. A problem unique to Firefox, attempts to highlight and paste in a better file name usually are met with a refusal to paste, a stuck context menu that can take a minute of clicking to clear, repeated jumping to the end of the file name, and other similar issues. I have encountered this problem repeatedly on different computers and different operating systems, it is a problem I have only ever encountered in Firefox.

    cor-el,
    I kept forgetting and procrastinating about following your instructions, since I have internet access only for limited amounts of time and usually I am busy with important tasks when I am.
    Out of the blue, the problem corrected itself (the Save As box started to open full screen, then shrunk down to a normal size and the edges can now be dragged to a custom size).
    Even the copy and paste problem in the filenaming area seems to have been less troublesome lately even though there have been no updates to Firefox in a few weeks.
    Even though I marked the solution as not helpful, the problem has in fact been resolved. I will save the solution instructions in case the issue returns.

  • [FIXED BUT NOT SOLVED] NVIDIA - Desktop shifted left off the screen...

    Hello Community!
    For a pretty long time right now, I am trying to fix the video setup of my HTPC but without success. Because I'am run out of ideas, I really need Your help.
    PROBLEM:
    The desktop is shifted left off the screen, round about 100 Pixel.
    It started some time in the past, while upgrading a one year old Ubuntu installation (NVDIA drivers). Because I couldn't fix it and also wanted to replace Ubuntu with ArchLinux, I performed a clean ArchLinux installation.
    First I used the nouveau drivers ending up with the same problem. I read an configured using xrandr and cvt, but with no success. 
    So I restored the system to a snapshot taken before X11 and nouveau drivers installations, thank's BTRFS, and installed the proprietary NVIDIA drivers ending up with the same problems. Again I tried all the tips and tricks found in the documentations and forums, used nvidia-xconfig, hand crafted the xorg.conf all with no success.
    HARDWARE
    The system is a MSI Media Live (http://www.msi.com/product/desktop/Media-Live.html)
    . Support AMDR Athlon 64 X2, Athlon 64 and Sempron in the Socket AM2 package
    . North Bridge: nVidia® C51PVG Chipset
    . South Bridge: nVidia® MCP51 Chipset
    . Graphics is Integrated NVIDIA GPU GeForce 6150 LE
    . VGA, SCART and HDMI - Connectors
    The display Problem is on VGA and HDMI now, where in the past the VGA was perfect. Therefor I connected and used the VGA port only, in all tests.
    INSTALLATION HISTORY
    2012-12-30 + Installation according ArchLinux install guide
    2012-12-31 + pacman -S openssh
    systemctl start sshd
    2012-12-31 + pacman -S btrfs-progs
    2012-12-31 pacman -S sudo
    2012-12-31 + sudo pacman -S bash-completion
    2013-01-03 + pacman -S rsync wget gptfdisk
    2013-01-10 + pacman -Suy nvidia-304xx
    2013-01-10 + pacman -Syu nvidia-304xx-utils
    2013-01-10 + pacman -S xorg-server xorg-xinit xorg-server-utils
    2013-01-10 + pacman -S mesa
    2013-01-10 + pacman -S xorg-twm xorg-xclock xterm
    2013-01-10 + pacman -S ttf-dejavu
    2013-01-10 + pacman -Suy lxdm
    2013-01-10 + systemctl enable lxdm.service
    2013-01-10 + pacman -S xorg-xdpyinfo
    2013-01-10 + pacman -S pkgtools
    2013-01-10 + pacman -S pkgfile
    2013-01-10 + pacman -S bc
    As You can see, I installed only a minimal X11 environment for test. The lxdm display manger shows up but with very small font and shifted to the left. Only if I force a resolution of 1024x768 the image is centered on screen/tv but still the very small font. Obviously not a solution for a HTPC.
    Here are the xorg.conf and the Xorg.0.log of my last test configuration.
    xorg.xonf
    # nvidia-xconfig: X configuration file generated by nvidia-xconfig
    # nvidia-xconfig: version 304.64 (buildmeister@swio-display-x86-rhel47-12) Tue Oct 30 12:04:46 PDT 2012
    Section "ServerLayout"
    Identifier "Layout0"
    Screen 0 "Screen0" 100 0
    InputDevice "Keyboard0" "CoreKeyboard"
    InputDevice "Mouse0" "CorePointer"
    EndSection
    Section "Files"
    EndSection
    Section "InputDevice"
    # generated from default
    Identifier "Mouse0"
    Driver "mouse"
    Option "Protocol" "auto"
    Option "Device" "/dev/psaux"
    Option "Emulate3Buttons" "no"
    Option "ZAxisMapping" "4 5"
    EndSection
    Section "InputDevice"
    # generated from default
    Identifier "Keyboard0"
    Driver "kbd"
    EndSection
    Section "Monitor"
    Identifier "Monitor0"
    VendorName "Unknown"
    ModelName "Unknown"
    HorizSync 28.0 - 33.0
    VertRefresh 43.0 - 72.0
    Option "DPMS"
    EndSection
    Section "Device"
    Identifier "Device0"
    Driver "nvidia"
    VendorName "NVIDIA Corporation"
    EndSection
    Section "Screen"
    Identifier "Screen0"
    Device "Device0"
    Monitor "Monitor0"
    DefaultDepth 24
    SubSection "Display"
    Depth 24
    EndSubSection
    EndSection
    In the Section "ServerLayout" I modified the line
         Screen      0  "Screen0" 100 0
    by adding the 100 0 at the end.
    Xorg.0.log
    [ 12.997]
    X.Org X Server 1.13.1
    Release Date: 2012-12-13
    [ 12.997] X Protocol Version 11, Revision 0
    [ 12.997] Build Operating System: Linux 3.7.0-1-ARCH x86_64
    [ 12.997] Current Operating System: Linux media-pc 3.6.11-1-ARCH #1 SMP PREEMPT Tue Dec 18 08:57:15 CET 2012 x86_64
    [ 12.997] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-linux root=UUID=0f1f870d-ccaa-4bc2-b149-1792f0c69fce
    [ 12.997] Build Date: 16 December 2012 04:45:14PM
    [ 12.997]
    [ 12.997] Current version of pixman: 0.28.2
    [ 12.997] Before reporting problems, check http://wiki.x.org
    to make sure that you have the latest version.
    [ 12.997] Markers: (--) probed, (**) from config file, (==) default setting,
    (++) from command line, (!!) notice, (II) informational,
    (WW) warning, (EE) error, (NI) not implemented, (??) unknown.
    [ 12.998] (==) Log file: "/var/log/Xorg.0.log", Time: Fri Jan 18 13:18:12 2013
    [ 13.065] (==) Using config file: "/etc/X11/xorg.conf"
    [ 13.065] (==) Using config directory: "/etc/X11/xorg.conf.d"
    [ 13.066] (==) ServerLayout "Layout0"
    [ 13.066] (**) |-->Screen "Screen0" (0)
    [ 13.066] (**) | |-->Monitor "Monitor0"
    [ 13.066] (**) | |-->Device "Device0"
    [ 13.066] (**) |-->Input Device "Keyboard0"
    [ 13.066] (**) |-->Input Device "Mouse0"
    [ 13.066] (==) Automatically adding devices
    [ 13.066] (==) Automatically enabling devices
    [ 13.066] (==) Automatically adding GPU devices
    [ 13.213] (WW) The directory "/usr/share/fonts/OTF/" does not exist.
    [ 13.213] Entry deleted from font path.
    [ 13.213] (WW) The directory "/usr/share/fonts/Type1/" does not exist.
    [ 13.213] Entry deleted from font path.
    [ 13.222] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/100dpi/".
    [ 13.222] Entry deleted from font path.
    [ 13.222] (Run 'mkfontdir' on "/usr/share/fonts/100dpi/").
    [ 13.222] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/75dpi/".
    [ 13.223] Entry deleted from font path.
    [ 13.223] (Run 'mkfontdir' on "/usr/share/fonts/75dpi/").
    [ 13.223] (==) FontPath set to:
    /usr/share/fonts/misc/,
    /usr/share/fonts/TTF/
    [ 13.223] (==) ModulePath set to "/usr/lib/xorg/modules"
    [ 13.223] (WW) Hotplugging is on, devices using drivers 'kbd', 'mouse' or 'vmmouse' will be disabled.
    [ 13.223] (WW) Disabling Keyboard0
    [ 13.223] (WW) Disabling Mouse0
    [ 13.223] (II) Loader magic: 0x7fcc40
    [ 13.223] (II) Module ABI versions:
    [ 13.223] X.Org ANSI C Emulation: 0.4
    [ 13.223] X.Org Video Driver: 13.1
    [ 13.223] X.Org XInput driver : 18.0
    [ 13.223] X.Org Server Extension : 7.0
    [ 13.226] (--) PCI:*(0:0:5:0) 10de:0241:1462:3290 rev 162, Mem @ 0xfd000000/16777216, 0xd0000000/268435456, 0xfc000000/16777216, BIOS @ 0x????????/131072
    [ 13.226] (WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
    [ 13.226] Initializing built-in extension Generic Event Extension
    [ 13.226] Initializing built-in extension SHAPE
    [ 13.226] Initializing built-in extension MIT-SHM
    [ 13.226] Initializing built-in extension XInputExtension
    [ 13.227] Initializing built-in extension XTEST
    [ 13.227] Initializing built-in extension BIG-REQUESTS
    [ 13.227] Initializing built-in extension SYNC
    [ 13.227] Initializing built-in extension XKEYBOARD
    [ 13.227] Initializing built-in extension XC-MISC
    [ 13.227] Initializing built-in extension SECURITY
    [ 13.227] Initializing built-in extension XINERAMA
    [ 13.227] Initializing built-in extension XFIXES
    [ 13.227] Initializing built-in extension RENDER
    [ 13.227] Initializing built-in extension RANDR
    [ 13.227] Initializing built-in extension COMPOSITE
    [ 13.227] Initializing built-in extension DAMAGE
    [ 13.227] Initializing built-in extension MIT-SCREEN-SAVER
    [ 13.227] Initializing built-in extension DOUBLE-BUFFER
    [ 13.227] Initializing built-in extension RECORD
    [ 13.227] Initializing built-in extension DPMS
    [ 13.227] Initializing built-in extension X-Resource
    [ 13.227] Initializing built-in extension XVideo
    [ 13.227] Initializing built-in extension XVideo-MotionCompensation
    [ 13.227] Initializing built-in extension XFree86-VidModeExtension
    [ 13.227] Initializing built-in extension XFree86-DGA
    [ 13.227] Initializing built-in extension XFree86-DRI
    [ 13.227] Initializing built-in extension DRI2
    [ 13.227] (II) LoadModule: "glx"
    [ 13.414] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
    [ 15.559] (II) Module glx: vendor="NVIDIA Corporation"
    [ 15.559] compiled for 4.0.2, module version = 1.0.0
    [ 15.559] Module class: X.Org Server Extension
    [ 15.559] (II) NVIDIA GLX Module 304.64 Tue Oct 30 11:18:32 PDT 2012
    [ 15.560] Loading extension GLX
    [ 15.560] (II) LoadModule: "nvidia"
    [ 15.560] (II) Loading /usr/lib/xorg/modules/drivers/nvidia_drv.so
    [ 15.868] (II) Module nvidia: vendor="NVIDIA Corporation"
    [ 15.868] compiled for 4.0.2, module version = 1.0.0
    [ 15.868] Module class: X.Org Video Driver
    [ 15.868] (II) NVIDIA dlloader X Driver 304.64 Tue Oct 30 10:59:51 PDT 2012
    [ 15.868] (II) NVIDIA Unified Driver for all Supported NVIDIA GPUs
    [ 15.868] (++) using VT number 7
    [ 15.875] (II) Loading sub module "fb"
    [ 15.875] (II) LoadModule: "fb"
    [ 15.984] (II) Loading /usr/lib/xorg/modules/libfb.so
    [ 16.008] (II) Module fb: vendor="X.Org Foundation"
    [ 16.008] compiled for 1.13.1, module version = 1.0.0
    [ 16.008] ABI class: X.Org ANSI C Emulation, version 0.4
    [ 16.008] (II) Loading sub module "wfb"
    [ 16.008] (II) LoadModule: "wfb"
    [ 16.008] (II) Loading /usr/lib/xorg/modules/libwfb.so
    [ 16.025] (II) Module wfb: vendor="X.Org Foundation"
    [ 16.025] compiled for 1.13.1, module version = 1.0.0
    [ 16.025] ABI class: X.Org ANSI C Emulation, version 0.4
    [ 16.025] (II) Loading sub module "ramdac"
    [ 16.025] (II) LoadModule: "ramdac"
    [ 16.025] (II) Module "ramdac" already built-in
    [ 16.025] (**) NVIDIA(0): Depth 24, (--) framebuffer bpp 32
    [ 16.025] (==) NVIDIA(0): RGB weight 888
    [ 16.025] (==) NVIDIA(0): Default visual is TrueColor
    [ 16.025] (==) NVIDIA(0): Using gamma correction (1.0, 1.0, 1.0)
    [ 16.026] (**) NVIDIA(0): Enabling 2D acceleration
    [ 19.582] (II) NVIDIA(GPU-0): Display (Acer AT3220 (CRT-0)) does not support NVIDIA 3D
    [ 19.582] (II) NVIDIA(GPU-0): Vision stereo.
    [ 19.584] (II) NVIDIA(0): NVIDIA GPU GeForce 6150 LE (C51) at PCI:0:5:0 (GPU-0)
    [ 19.584] (--) NVIDIA(0): Memory: 262144 kBytes
    [ 19.584] (--) NVIDIA(0): VideoBIOS: 05.51.28.56.19
    [ 19.584] (--) NVIDIA(0): Interlaced video modes are supported on this GPU
    [ 19.584] (--) NVIDIA(0): Valid display device(s) on GeForce 6150 LE at PCI:0:5:0
    [ 19.584] (--) NVIDIA(0): Acer AT3220 (CRT-0) (connected)
    [ 19.584] (--) NVIDIA(0): TV-0
    [ 19.584] (--) NVIDIA(0): DFP-0
    [ 19.584] (--) NVIDIA(0): Acer AT3220 (CRT-0): 350.0 MHz maximum pixel clock
    [ 19.585] (--) NVIDIA(0): TV-0: 400.0 MHz maximum pixel clock
    [ 19.585] (--) NVIDIA(0): TV encoder: (null)
    [ 19.585] (--) NVIDIA(0): DFP-0: 310.0 MHz maximum pixel clock
    [ 19.585] (--) NVIDIA(0): DFP-0: Internal Single Link TMDS
    [ 19.585] (**) NVIDIA(0): Using HorizSync/VertRefresh ranges from the EDID for display
    [ 19.585] (**) NVIDIA(0): device Acer AT3220 (CRT-0) (Using EDID frequencies has
    [ 19.585] (**) NVIDIA(0): been enabled on all display devices.)
    [ 19.585] (==) NVIDIA(0):
    [ 19.585] (==) NVIDIA(0): No modes were requested; the default mode "nvidia-auto-select"
    [ 19.585] (==) NVIDIA(0): will be used as the requested mode.
    [ 19.585] (==) NVIDIA(0):
    [ 19.585] (II) NVIDIA(0): Validated MetaModes:
    [ 19.585] (II) NVIDIA(0): "CRT-0:nvidia-auto-select"
    [ 19.585] (II) NVIDIA(0): Virtual screen size determined to be 1360 x 768
    [ 19.587] (WW) NVIDIA(0): Unable to support custom viewPortOut 1360 x 765 +0 +1
    [ 19.588] (WW) NVIDIA(0): Unable to support custom viewPortOut 1360 x 765 +0 +1
    [ 19.589] (--) NVIDIA(0): DPI set to (49, 48); computed from "UseEdidDpi" X config
    [ 19.589] (--) NVIDIA(0): option
    [ 19.589] (--) Depth 24 pixmap format is 32 bpp
    [ 19.599] (II) NVIDIA(0): ACPI: failed to connect to the ACPI event daemon; the daemon
    [ 19.599] (II) NVIDIA(0): may not be running or the "AcpidSocketPath" X
    [ 19.599] (II) NVIDIA(0): configuration option may not be set correctly. When the
    [ 19.599] (II) NVIDIA(0): ACPI event daemon is available, the NVIDIA X driver will
    [ 19.599] (II) NVIDIA(0): try to use it to receive ACPI event notifications. For
    [ 19.599] (II) NVIDIA(0): details, please see the "ConnectToAcpid" and
    [ 19.599] (II) NVIDIA(0): "AcpidSocketPath" X configuration options in Appendix B: X
    [ 19.599] (II) NVIDIA(0): Config Options in the README.
    [ 19.599] (II) NVIDIA(0): Setting mode "CRT-0:nvidia-auto-select"
    [ 19.754] Loading extension NV-GLX
    [ 19.797] (==) NVIDIA(0): Disabling shared memory pixmaps
    [ 19.797] (==) NVIDIA(0): Backing store disabled
    [ 19.797] (==) NVIDIA(0): Silken mouse enabled
    [ 19.798] (**) NVIDIA(0): DPMS enabled
    [ 19.798] Loading extension NV-CONTROL
    [ 19.799] Loading extension XINERAMA
    [ 19.799] (II) Loading sub module "dri2"
    [ 19.799] (II) LoadModule: "dri2"
    [ 19.799] (II) Module "dri2" already built-in
    [ 19.799] (II) NVIDIA(0): [DRI2] Setup complete
    [ 19.799] (II) NVIDIA(0): [DRI2] VDPAU driver: nvidia
    [ 19.799] (--) RandR disabled
    [ 19.817] (II) Initializing extension GLX
    [ 20.522] (II) config/udev: Adding input device Power Button (/dev/input/event3)
    only removed the input detection stuff
    Question
    How can I shift the display to the right?
    Many thanks for any hints.
    rale
    Last edited by rale (2013-01-19 11:46:14)

    Mr.Elendig wrote:Switch to dvi/hdmi if you can. Else you have to play with screen calibration etc.
    Thank You Mr.Elendig!
    The simplest answer often is best. After I connected a TFT display, instead of my TV, I was able to calibrate the screen output and got the desktop shifted. Knowing that, I tried the settings of my TV again. There is a hard to find option for calibration wich is set to automatic but doesn't do it. Trying to turn it of did the trick. Even the option stays on automatic and even the display format is fixed to 4:3 instead of 16:9, finaly the TV adjusted the display correctly.
    None the less, the problem not to be able to shift the desktop using the screen paramters in xorg.conf remains.
    Thanks
    rale

  • PDF display accurate page size in Full Screen Mode

    Mac G5 Tower Panther OS. When making a PDF presentation to a client (an A4 brochure for example) I would like to use the Full Screen mode using my remote to change pages and make a smooth impression. The problem is on my Apple 20' Cinema display the A4 design fills the screen when I want to show it at 100% size only (210 x 297mm). I can do this easily in Acrobat normal mode but can find no way to make this so with Full Screen mode. The screen resolution is 1680x1050 and I am reluctant to even temporarily change it because it knocks other stuff off kilter.

    I can't find how to do this anymore either.
    It was a GREAT feature.
    And now suddenly, it appears to be removed!  What the heck Apple !!!!

Maybe you are looking for

  • Can I upgrade my (Graphics Card) on my laptop?

    Hello can my (Graphics Card) on my laptop be upgraded  this is mine  http://gyazo.com/e10f4147557ec792856f20c0e215e553

  • Cisco ASA 5505 host license count?

    Hi, I have a ASA 5505 with base 50-user license deployed for a 15 people branch office. But recently ASA started to block internal host since license reached MAX 50. I did show local-host on ASA and then manually filtered output in spreadsheet and th

  • How to set the ChartLength in a multiplot graph

    I have a multiplot chart and I need to set the total number of visible points in the graph. The CNiGraph::ChartLength() sets the total number of points for each plot, not for the whole graph. How can I do that ?

  • BI Presentation - Answers

    Hi, I'm trying to do a filter in BI Answers. I'm using MS SQL database. I 'd like to filter out rows which contains in the column value '' (nothing). When I'm preparing query in WINSQL i just put where COLUMN not like '', but what should i put in ans

  • Work in low res?

    Is it possible to work in a low res setting in livetype? It's soooo sloowwww.