Display scanned image from the image server in the browser in BW Reports...

Hi All,
I need to display a scanned image of invoice In BW Reports ,  the information about image ie URL Llink Present in the table TOA01
u2022
TOA02
u2022
TOA03
u2022
TOAHR
u2022
TOADL .  I have an idea that we can extract the information from above table to BW and can able to Display the image in WAD Reporting ................
       Can anybody help regarding this .............? 
Give some idea or material regarding this will be help full ?

Hi Guru,
  Check the below link, it will be useful for you:
http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/e0c8bfa4-7348-2c10-b9ae-bc1ff04a9aeb?QuickLink=index&overridelayout=true
Thanks
Pawan

Similar Messages

  • Dragging a large still image from the browser into the viewer crashes FCP

    Okay, I've not seen this problem until just a couple days ago but was wondering if it was just me or if everyone has this problem? I've found a work-around, but let me explain the problem first.
    I'm creating a growing up photo montage. I scanned all of the pictures myself at 300 dpi (as I've always done in the past) and saved them as TIF files. Some pictures as relatively small, i.e. 3.5 mb is size and do just fine, but it appears anytime I drop a picture into the viewer in preparation for the the timeline, it will crash FCP if the image file is any larger than about 5 or 5.5 MB. Now I know there is a limit on the resolution of a still and it shouldn't be any larger than 4000 pixels in either direction, but that is not my problem, the problem appears to occur with large files. I've used large still files before in past projects without any problem, so this is why I'm stumped. I've went as far as trashing my preferences, but that didn't change anything. I've even tested a still image from a past project that was something around 9 MB (or was it 19 mb?) in any case, it also crashed FCP but... I've used that picture before in past projects without any problem. I even created a new test project just in case my project file itself had a problem.
    My work-around is to simply drop the still image from the browser directly into the timeline, thus bypassing the viewer. This works every time without a hitch. I can even double-click on the still now setting in the timeline to load it into the viewer so I can add effects or keyframes or whatever without any problems (thank goodness). So, has anyone else experienced this problem or is it just me?

    Is this image saved in a colorspace mode that is anything other than RGB?
    CMYK & Grayscale images will cause problems.
    Some light reading regarding your choice of 300 dpi: http://www.scantips.com/no72dpi.html
    Unless you plan on panning and zooming your images, the best procedure is to use one of the video preset templates in Photoshop and paste your content into it. Scale and position using the Transform controls. For best results save as a TIFF without compression. Don't forget, always in RGB colorspace.

  • Why can't I drag and drop images from the browser into other programs?

    Ever since I upgraded to Firefox 4 (even after I upgraded again to Firefox 5) I have been unable to drag images from the browser into other programs, including MS Paint and IcoFx. I receive an error message stating that the file (the address given lists it as being located in the temporary files folder) cannot be found.
    Prior to this I had always been able to conveniently drag and drop images for easy editing without having to save first and then open them. This feature is important to me, as I work with graphics very often, and is still available in Chrome and Internet Explorer. I love Firefox though, and hope that there is something I can do to fix the problem.

    I had this problem on Windows 8.1.1 and iTunes 11.2.2.3
    To resolve it from within Itunes I did :  Edit, Preferences, Sharing.
    I took the tick out of "Share my library on my local network"
    Click OK.
    Closed iTunes/
    Reopened iTunes and I can drag and drop.
    I went back into Edit, Preferences, Sharing and put the tick back and clicked OK.
    Works fine now.

  • Displaying a jpg on the browser using a simple http server.....

    Hi
    I've written a simple server which responds by sending a jpg file .
    BROWSER ---request---> SERVER ( reads a jpg file, converts to byte[] and writes to browser )
    ^
    |
    |
    <----response ----------
    So I connect from the browser and the server sends a jpg and I'd to display that. Everything is thru sockets. There is no webserver as such.
    The problem is, I'm getting the text fine, but instead of the picture, I get lots of characters...probably the browser is unable to interpret the jpg . How to I display the jpg ? Do I have to convert the characters in the server code before sending it ?
    Anything to do with Base64 encoding ??
    Thanks !!

    All answers to this question including mine disappeared ??????
    In order to serve an image or any other type of data over the HTTP protocol you have to supply the correct HTTP response header with the data.
    The stream of bytes written to the client should be structured like this:
    A status code followed by several lines of key/value pairs with header information, a blank line and finally the bytes of the image.
    All lines in the header should end with \r\n no matter what OS the server is running.
    HTTP/1.1 200 OK
    Date: Wed, 07 Nov 2001 18:37:47 GMT
    Server: MyServer/0.1
    Content-Type: image/jpeg
    Content-Length: 4321The Content-Length field must have the length of the image data in bytes. The Content-Type field must be the correct mime type for the image data.
    Read RFC 2068 if you want or need more information.

  • Display dashboards simultaneously from company's server and localhost

    Hi Experts,
    We have a laptop that we have installed SAP B1 (Server and Client) locally. This laptop can connect to two servers;
    localhost and to company's server. We would like to ask whether there is a way to display dashboards
    from company's server using Sap Client when laptop is connected to company's network. Also if it is possible to
    display dashboards simultaneously from company's server and localhost.
    Thank you in advance,
    Vassilis Korolis

    Hello,
    Well, as far as I know it is not possible to make it automatically using SAP Business One Client, but we have made a wrapper for standard client that might help.
    The idea behind is to create two (or even more, if required) connections in Skybuffer SBO LogonPad and  then to click the connection that you would like to start (either local server or remote server that is accessible at company network).
    Additionally, it is possible to open two SAP Business One Client instances that are connected to two different servers from one machine simultaneously with help of Skybuffer SBO LogonPad, but I have never tested how stable the connects are, so please be careful with this. But in case of read only access (like you've mentioned  - dashboards display), I can say that it is safe enough.
    Here is the picture that shows that I can access two different servers from one machine:
    And you can download Skybuffer SBO LogonPad from here:
    Skybuffer SBO LogonPad (version 0.2)
    P.S. that's a freeware wrapper to facilitate different license servers connectivity for SAPB1 consultants.
    Kind Regards,
    Siarhei

  • Uploading the file to server from the browser using JSP

    I have facing difficulty while uploading the file from the browser using user interface to the server or to the database. As previousy i was working in coldfusion, i find it very easy there with cffile command, but i am confused how to do that in JSP
    please reply soon, as i am stuck in my project because of that
    Sarosh

    Check out http://www.jspsmart.com , They have a nice free upload api that can be used w/ JSPs or Servlets. I hear O'Reilly has a nice one too. May as well use someone elses if they've done it already.

  • After ios6 update, I have lost all control of audio via Bluetooth, plus my Bluetooth car radio is no longer displaying track information from the iPhone. Help!

    After ios6 update, I have lost all control of audio via Bluetooth, plus my Bluetooth car radio is no longer displaying track information from the iPhone. Help!

    Hi there,
    You're running an old version of Safari. Before troubleshooting, try updating it to the latest version: 6.0. You can do this by clicking the Apple logo in the top left, then clicking Software update.
    You can also update to the latest version of OS X, 10.8 Mountain Lion, from the Mac App Store for $19.99, which will automatically install Safari 6 as well, but this isn't essential, only reccomended.
    Thanks, let me know if the update helps,
    Nathan

  • My iPod display is separating from the chrome back and there are no close apple stores what should I do?

    My iPod display I separating from the chrome back. There are no close apple stores. What should I do?

    If covered by warranty, and not abused Apple will exchange it at no cost. You can send it to Apple See:
    Apple - Support - iPod - Service FAQ
    Otherwise,
    Apple will exchange your iPod for a refurbished one for this price. They do not fix yours.
      Apple - iPod Repair price

  • Trying to access SharePoint / Office 365 Server options from the browser

    When I use the Open With Explorer view of a SharePoint library and open a document from there, I am prompted to Check Out & Open (or just open) the file.  And then from the open file, under the File menu, I have an option for SharePoint / Office 365 Server, to check the file back in and/or to update Document Properties.  This is the exact functionality I am looking for.  My question is, why don't I have this option when I open the PDF in one of these scenarios:
    direct from the browser (within SharePoint)
    from a synced library
    outside of SharePoint (i.e. from the Desktop)

    Seems like a good question for a SharePoint user forum.
    Be well...

  • I've just completed a vunerability scan (Kaspersky 2010 suite) and it recommends Idownload a patch from the vendor (SA42517= fault report). there are no updates so is Firefox safe to use?

    I've just completed a vunerability scan (Kaspersky 2010 suite) and it recommends Idownload a patch from the vendor (SA42517= fault report). there are no updates so is Firefox safe to use?

    You are using a relatively old version of Firefox (version 3.6), you should update to the latest version (3.6.13), there have been quite a few security fixes since the one you are using. You can get it from http://www.mozilla.com - you can download the setup file then run it to install it, this will replace your version with the latest.

  • Connecting to the Oracle8i database from the browser

    Can any one please tell me the architecture requirements and setup for connecting to the orcle 8i database from the browser. I am dummy in internet programming but I would like to learn it.
    We currently have "Oracle8i Enterprise Edition Release 8.1.7.4.0 - 64bit Production" installed on HP-UX B.11.00 server with "JServer Release 8.1.7.4.0 - 64bit Production"
    Basically I want to create a simple ADD/MODIFY/DELETE/VIEW screen in the browser,
    connecting to the oracle 8i database, select data and display it on the browser.
    In order to achieve this, what should I install in the Oracle database or what should I check in the database to see if that is installed already.
    Currently it has the Java pool created, clasess installed already and also the XML
    packages installed already. (i.e XMLGEN, XMLPARSER, XML....)
    what are the other O/S level set up is necessary. I currently have "Microsoft Internet Explorer" 4.72 version.
    Thanks in advance.
    Pushparaj

    hi ,
    well you can do it by using PL/SQL web tool kit packages.
    HTP package,OWA_ packages...
    Mostly these are there with in 8.1.7.
    Check by logging into SYS user
    select * from all_objects where object_name like 'OWA%'
    No need of wasting intially ur time in XML or any thing.
    So see the package body and nowing that u can write your own procedure using those packages.
    and deploye it in jserver.
    we have done and it's working
    all the very best
    [email protected]

  • Opening the Canvas window and the Timeline from the browser

    I am on an Intel 2x2.66 Dual Core using OS 10.4.11 and working in FCP 6.04.
    I know this is a stupid question but having been a composer all my life, I am not up to speed on FCP and I seem to be unable to find the answer in my manual.
    I dragged a QuickTime movie to the browser window. It is 500x375 in dimension and uses a H.264, AAC codecs. (info I got from the Get Info window).
    The video shows up and plays in the Viewer window but I cannot get the Canvas window nor the Timeline to open.
    I have tried selecting the sequence from the list in the browser and then control clicking it and looking at the shortcut menu there. The manual says I should choose Open Timeline from this shortcut menu but that is not even a choice I have. I don't mean it is grayed out, I mean there is no Open Timeline choice on the menu.
    As an alternate, the manual suggests selecting the sequence and then choosing View > Sequence in Editor. I tried this also. There is no Sequence in Editor choice under the View menu. There is a Clip in Editor choice but when I select that it simply opens the movie in Quicktime.
    I am aware that I am probably forgetting something simple or doing something stupid but I cannot figure it out. Help would be much appreciated.
    Thomas

    the simple fact that is being eluded to here is that without an active sequence in the project (shown in the browser) there is no canvas or timeline. If you delete your sequence from the browser, the timeline and canvas will disappear, and you will have to create a new sequence, then open that sequence by double clicking it, to get those windows back. Canvas and Timeline display sequence content. No sequence, no c/t.

  • Get certificate from the browser

    Hi friends!,
    I am working with an application to get files from the client machine, to sign those files with the client's certificate and send those sign to the server.
    The application get the client's certificate from a key store, but I want the applet will get the certificate from the browser.
    Is that possible?.
    Thanks and sorry for my little english. Greetings from Venezuela.

    If all you're looking for is Client SSL Authentication, then you don't need to access the digital certificates through an applet; just enable ClientAuth on your web-server and let the browser handle it for you. While I haven't tried this with Chrome, Safari or Opera, I know for a fact that this works on Firefox and IE.
    If you're trying to access the digital certificates/keys in the browser-keystore for digitally signing some content that the applet creates, you're going to have far more difficulty. About 10-12 years ago, Netscape provided an API that allowed you to digitally sign text-content through JavaScript. That died a quiet death, I think, since I don't know of anyone who used that capability (outside of test environments).
    Years later, Mozilla added the ability to digitally sign XML content using XForms; there is even an add-on for Thunderbird (which uses the same libraries as Firefox for PKCS work): https://addons.mozilla.org/en-US/thunderbird/addon/4522/.
    However, to the best of my knowledge, the only way you can get an applet to access the borwser's keystore today is to have the security policy on the client-machine modified to provide access to the local file-system, and the applet then pretty much deals with the keystore and its objects through JCE.
    But, if I'm reading your post correctly, I think all you're looking for is SSL ClientAuth, for which you don't need to do anything other than enable it on your web-server that hosts the applets, and let the browser do the heavy lifting.
    Arshad Noor
    StrongAuth, Inc.

  • Problem when printing from the browser

    The report is displayed in the browser properly. We are using rwcgi to view the reports in the browser. But when printed using the print option of the browser, the page setup is taken from the browser's page setup. How do we set the browser's page setup from the reports? Also the fonts are changed to the browser's font. How do we force the browser to take the same font as defined in the reports?
    null

    Oh my how embarrassing! The only place I neglected to check was in Firefox itself and under File-> Page Setup it was set to 50%. Reset it to 100% and problem solved!

  • I get redirected to unwanted web sites during searches from the browser ONLY, never from the toolbar. Is this the same malware problem as discribed for redirects from BOTH the browser and the toolbar?

    I get redirected to unwanted web sites during searches from the browser ONLY, never from the toolbar. Is this the same malware problem as discribed for redirects from BOTH the browser and the toolbar?
    == This happened ==
    Every time Firefox opened
    == was happening with Internet Explorer, continues with Firefox

    Did you do a malware check?
    Do a malware check with a few malware scan programs.
    You need to use all programs because each detects different malware.
    Make sure that you update each program to get the latest version of the database.
    http://www.malwarebytes.org/mbam.php - Malwarebytes' Anti-Malware
    http://www.superantispyware.com/ - SuperAntispyware
    http://www.safer-networking.org/en/index.html - Spybot Search & Destroy
    http://www.lavasoft.com/products/ad_aware_free.php - Ad-Aware Free
    http://www.microsoft.com/windows/products/winfamily/defender/default.mspx - Windows Defender: Home Page
    See also "Spyware on Windows": http://kb.mozillazine.org/Popups_not_blocked and [[Searches are redirected to another site]]
    (the MozillaZine KB is currently down, so you may need to try again later)

  • Hello! I am writing to inform you that about that you have a problem displaying your website in the browser.

    Hello! I am writing to inform you that about that you have a problem displaying your website in the browser.
    In Yandex browser. I decided to tell you, because the site is not displayed correctly. As in the screenshot.

    apart from the fact there's no way I could have answered your question confidently, I was also not able to supply my non-answer within your very tight time constraints.
    what happened? how'd you get on?

Maybe you are looking for