Display screen is turned off after timeout even when blanking disabled

After a recent update which among other things upgraded gnome to 3.10 my display blanking policy no longer behaves according to a configuration.
Currently it is being turned off (monitor says "no DVI signal" and switches off) after each 10 mins if idle time.
In Gnome's Power Settings I have 'Blank Screen' set to Never.
It used to work perfectly earlier, no blanking, but now it blanks not only when I'm idle, but even when watching some movie in VLC.
I am not sure if this has to do with Gnome update or some other system component is causing this.
Using nvidia driver.
Any hint or link to the topic with the workaround would be greatly appreciated.
I tried google and local forum search and found nothing on the topic
Last edited by dimsuz (2013-10-10 09:49:36)

I just noticed myself this annoying issue and I do not use Gnome nor GDM.
The thing is after checking the xset settings with
xset q
I noticed that the DPMS settings for Standby, Suspend and Off were back to their default values (60/60/600) instead of the 0/0/0 as I am using
xset s off &
in my openbox autostart file to avoid the screen blanking.
The way I fixed it was to simply run
xset -dpms
being the DPMS featured as disabled when queried.
Afterwards I checked that the screen did not blank again and 1) logged out and 2) restarted checking both times that the DPMS were the ones expected (0/0/0).
Thus, so far, I have no issues with the screen blanking in a non Gnome environment (Openbox) anymore.
Last edited by root (2013-10-18 22:46:26)

Similar Messages

  • HT201401 Why does my iPhone 3G keep turning off by itself even when it's not dead?

    My dad had his iPhone 3G and gave it to me when he had an upgrade. He never had the issue of it turning off by itself, but when he gave it to me, all of a sudden it decided to turn off by itself even when it was on like 80% still.
    I took it in to the Apple Store near me and they said that I had too much "stuff" on it, mostly music.
    So, I completely redid my phone. I reset it completely so that it looked like a completely new iPhone. And then downloaded only 12 apps and 195 songs. And, only about 50 pictures. (This is an 8 gig by the way)
    Right now, there's less than 4 gigs on there so far meaning I still have more than half of my phone to fill. They guy at the store said it needs 2 gigs to run.
    SO, it should have started working since theres way less stuff on there now, and more than enough space to run. Why does it keep turning off still though?
    It's so annoying and inconvenient. If anyone could help it would be SO appreciated.
    THANKS!!

    Basics from the manual are restart, reset, restore from backup, restore as a new device.  Go through each step in succession until your issue is resolved.

  • Yoga 13 display does not Turn off after idle

    I have the computer set to the balanced power option, and the disaplay is set to turn off after 5 minutes on battery and 10 minutes when plugged in. Unfortunately the screen never turns off.
    Anyone know how to fix this problem ?

    hi tmpst,
    Welcome to the Lenovo Forums.
    If a wireless device (mouse, keyboard, etc.) is plugged to the computer, the display, screen saver or sleep function might not work. If this is your case, try to:
    1. Remove your wireless device (might include a usb dongle)
    2. Apply the Moving mouse causes laptop to exit sleep mode fix
    If you have Power DVD installed, apply http://support.microsoft.com/kb/913405
    Let me know your findings.
    Cheers.
    Did someone help you today? Press the star on the left to thank them with a Kudo!
    If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.
    Follow @LenovoForums on Twitter!

  • Thr screensaver turns off the music even when I Set it as yes, screensaver with music. I have restore the appletv, but it still happens.

    My screensaver is turning off the music, even if i choose yes, screensaver with music. How to fix that? I have already restored the appletv.

    Try manually connecting the device to your PC in Disk Mode and then restoring it iTunes.
    From http://support.apple.com/kb/HT1363
    Putting iPod devices with a Click Wheel into Disk Mode
    If necessary, verify that your iPod has a Click Wheel.
    Before placing the iPod into Disk Mode, verify that it is charged.
    Toggle the Hold switch on and off (set it to Hold, then turn it off again.)
    Press and hold the Menu and Select buttons for at least six seconds, until the Apple logo appears.
    When the Apple logo appears, release the Menu and Select buttons and immediately press and hold the Select and the Play/Pause buttons until the Disk Mode screen appears.
    Connect the iPod to your computer; the screen on the iPod will should say "Do not disconnect".
    If you are having difficulty putting your iPod into Disk Mode, set it on a flat surface. Make sure that the finger pressing the Select button is not touching the Click Wheel. Also make sure that you are pressing the Play/Pause button toward the outside of the Click Wheel and not near the center. If you are still unable to put your iPod into Disk Mode, use one finger from one hand to press the Select button, and one finger from the other hand to press the Play/Pause button.
    B-rock

  • Display won't turn off after locking.

    My 701 running on belle fp1 doesn't turn off the display after locking the phone?
    It's just keeps the display always on.
    Restarting solves the problem but this is happening again and again.
    Please solve this Nokia.
    -------------------If this post helped you, click on accept as solution.------------------
    -----------------------------Appreciate by clicking on white star.----------------------------
    Solved!
    Go to Solution.

    No,
    I noticed that popclock at the top left yesterday when I pressed the menu key after lock.
    Actually I have lot of apps installed on the memory card like games and apps.
    After firmware reinstall at Nokia care, I inserted back my memory card and copied all mass memory backup from my pc.
    After stating the phone after inserting memory card, phone started to display installing without cancel button and I got back almost all of the apps.
    Maybe this is caused the popclock or Nokia bubbles to show and turn the display always on.
    Today I had no problem at all.
    -------------------If this post helped you, click on accept as solution.------------------
    -----------------------------Appreciate by clicking on white star.----------------------------

  • IPhone 4s turns off after a while when I turn on 3G/wifi

    Hi,
    Recently I have been facing a serious problem with my iPhone 4s. The battery is draining quickly, I mean very quickly, especially when I am using wifi or 3G. 3G to be more specific.
    I have been charging my iPhone 4s at work on the computer USB cable. I don't know if this damages the battery, I believe it has already happened or maybe it messes up the battery life and percentage.
    Sometime when I am talking on the phone and I have like 47% it shuts down, whenever I turn on my 3G after a couple of minutes even when i have 70% it shuts down then I wait a couple of minutes and I will be able to turn it back on, it works for a like 1-2 minutes then it shuts down again. I seriously can't use 3G!!! The iPhone will not let me! Sometimes when I open the camera to take pictures, the iPhone turns off!
    Is there any way to fix this, has anybody faced this problem, how can I fix it? I have done a restore but it did not work, if I have done it corrrectly.
    I currenlty running iOS 7.0.2.
    I will appreciate the help.
    Regards,
    Firas

    Hi firaskurdi
    i also ipone user, v6.0.1, maybe your problem are similiar to me.
    i have done the following:
    hard reset - done
    soft reset - done
    restore itunes - done
    battery calibration - done
    firmware 7.0.4 - do not want to perform too because ios7 heard that is drain battery faster than previous firmware.
    but do not use.
    maybe you can do a battery calibration 1st, means full charge, turn off 3G, use it until 0% and let it shut off, charge back, turn on iphone, wait it charge until 100% without interruption.
    then you do a reset on network settings.
    i go to apple store, they have same technical knowledge with me, ask to change a new board, or buy a new phone. wow...incredible, my iphone was 1.5 years old and never drop to floor before.
    thanks.
    gan~

  • Computer turns off after 20 minutes when using battery

    I only have 8 months with my computer and when I use it on battery life it turns off without warning after 20 minutes and the indicator showed that it could continue running for 2 more hours.

    Reset the PMU (power management unit) and Re-calibrate the Battery

  • Screen brightness on 808 - after timeout even brig...

    Hello,
    I have set my screen (backlight) brightness on 808 Belle FP2 to minimal possible (and in the night it's still too much imho).
    I have set the display timeout to 5s (minimum). However, after this timeout, the screen gets brighter instead of turning backlight off or at least keeping it minimal.
    Is this a known bug? Can I do somethign with it?

    Hi fantomas,
    I can confirm this bug. With the great app "Situations" I have created a "night" situation on my 808 (FP 2) where the phone goes into powersaving mode. There, the lowest screen brightness is chosen. Sometimes, a few seconds after the last touch on the screen, it becomes brighter. Touching the screen again makes it go back to the correct (=lowest) brightness level.
    It shouldn't be too hard for the ex-Nokia emploxees at Accenture to fix that.
    6600 -> N90 -> N95 8GB -> (skipped N97) -> N8 -> N950 -> 808 PureView

  • [Gnome 3] Prevent screen to turn off [Solved]

    Hi guys,
    I finally updated from Gnome 2 to 3 and wonder how I can prevent my screen to turn off after a while. From Gnome 2 I was used to be able to set 'never' besides settings like '1 minute', '10 minutes'...
    Is there any way to apply that to Gnome 3?
    Regards
    Last edited by orschiro (2011-08-26 22:38:56)

    Kaustic wrote:
    Have you tried setting it in your xorg.conf "ServerLayout" section?
    Option "BlankTime" "0"
    Well, some systems [like mine] of some people [like me] don't have "xorg.conf cause don't need that file at all.
    You should try another recipe:
    From your terminal you can execute two simple commands:
    xset s off # Disable X windows screen saver
    xset -dpms # Disable display power management system
    (From here: http://forums.fedoraforum.org/showthrea … 528&page=2)
    Really works. Just add this to your ~/.bash_profile.
    Last edited by nobus (2011-08-26 19:32:42)

  • IPhone 4 OS 7.1.2 doesn't turn off after notification

    After I receive a text, email notification or missed phone call, the notification screen usually turns off after a few seconds. It's gotten to where about 40% of the time it just stays on until I manually hit the On/Off button. At first I thought it was because the phone was plugged up but it's also happening when it is unplugged.
    Anyone else having this issue or know of a fix?

    Try a reset first.
    Close all open apps by double-tapping the home button, then swiping up and off the screen with the app window (not the smaller icon).
    Reset your device: hold down the home button along with the sleep/wake button until the screen goes black and you see the Apple, then let go. (No data loss)

  • Stuck in recovery mode and turns off after 30 seconds

    Hi everyone,
    I have done my research but no one seems to be having the exact same problem that I have. Here's what happened:
    When I was updating the firmware of my Ipod Touch 4g iOS to 4.2 in a MacBook Pro, it suddenly cut the USB power because it was low on battery. After which, my Ipod now only goes from the apple logo to recovery mode (connect to itunes screen)then turns off after about 30seconds.
    It still gets recognized in iTunes but it doesn't stay powered on long enough for something to be done (restore, iRecovery, etc.). I have tried doing the DFU to recovery mode, holding the home button when connecting the cable, etc.
    I have everything backed up so restoring is not an issue. I just need it to work.
    Help!

    Not sure if this is the same problem exactly but all of a sudden my phone was stuck in headphone mode & wouldn't make sounds through the speakers at all. This was because of a dirt/dust buildup in the port. What I did was hold the phone & a flashlight in one hand & scraped out the crap with a safety needle/pin thing. This was very useful because I could exactly see where the stuff was & eventually I dug it all out. Works fine now! Hope this helps you/anyone else having a similar problem

  • Screen not turning off

    why is my screen not turning off during a conversation - when I put it to my ear the screen does not turn off and I touch the hold and all the other buttons while talking. I tried switching it off and restarting it .
    thx

    Try a reset, hold home button and sleep/wake button down together until phone shuts off.  Release the buttons when this happens and the phone should come back on.  Give it minute to turn on completely and then do a test call to see if it is still happening.  May need to do a restore but definitely back up the device before doing that.

  • Yoga display turns off after 1 minute

    I'm having an annoying problem with my new Yoga related to the display and have not seen any other posts with a similar complaint so perhaps this is a simple fix that I'm just not able to sort out on my own. My display turns off after 1 minute of inactivity. The only means for changing behavior like this that I am aware of is through the Control Panel Power Options. My settings for "turn off the display" are 10 minutes on battery and Never while plugged in (note screen shot attached). Regardless of my settings, the screen turns off after 1 minute. I've changed the settings to multiple configurations and restarted with no change in behavior. Perhaps there's some other settings area, maybe something specific to Lenovo that I'm not aware of (since this is my first Lenovo laptop). Anyone with similar problems or insight?

    This may be a Windows 8 issue. I finally fixed this problem by identifying the screen saver as the issue (and I wasn't using a screen saver). Type "lock the computer" into the search box after clicking the search charm, which brings up the screen saver dialog box. Mine was set to 1 minute, though I'd never set it myself. If you can't change it, choose a screen saver and you should be able to do so (and can then switch back to no screen saver). BUT, here's the problem. Other things you install (or settings within things you install) can apparently change and override whatever you type in for the delay time. Try applying your new time and exiting from the dialog box, then open it back up again. I was finding that it kept going back to 1 minute. To reset things so that you can get control again, type "user accounts" into the search box and when the dialog box comes up, choose "Reset Security Policies". Then you can go back to the screen saver dialog and successfully change the delay time. See http://social.technet.microsoft.com/Forums/windows/en-us/ace4085a-b0ba-4a98-898d-cd92d9e88e13/window... for some detail.

  • My screen darkens after 1 minute and turns off after 3.  All of a sudden, now, after the screen shuts down, it comes right back on????

    My screen darkens after 1 minute and then turn off after 3 minutes (energy saver).  Now, all of a sudden, after it shuts down it comes right on???

    thank you so much sir... i am very thank ful to u... it was an breath taking moment ... i was almost dead as it didnt work

  • Screen turns off after a few minutes and needs to be closed then opened

    hi, as the title suggests my powerbook screen turns off after a few minutes before my screensaver is set to come on and when i come back and press a key or move the pad it wont start up so i need to close the powerbook then open it up again for it to activate. its not a huge problem but my programs which connect to the internet seem to lose their connection when i open it up again. is this normal? is there a setting i can change?
    thanks
    ross

    Is there a way to "disable" Standby, Suspend and Off just when watching movies (in fullscreen or not)? I want them to do what they usually do in all other cases.
    Setting them to 0 in xorg.conf does the thing, but I need that functionality only when I'm wathing movies. Making a script that alters adjustments in xorg.conf isn't the best solution - you'd have to restart X every time you want to watch a movie .
    Cheers,
    Daniel

Maybe you are looking for

  • Mismatch of Assigned Budget in CJ33 & Report S_ALR_87013558

    Hi, I would like to inform there is an issue in mismatch of assigned budget value in CJ33 wrt hierarchical report(S_ALR_87013558). Request you to suggest to fix the issue. Thank you for your coopearation. Regards, Ranjan

  • Converting Microsoft Word 2008 to 2011

    Can I delete Microsoft Word 2008 after I download Microsoft Word 2011 on my mac? Will I lose documents?

  • Table for E Mail statuses

    Hello Experts, I am able to see the E Mails statuses in SOST transaction code. Can anyone tell me where these statuses are stored. Is there any way to know the status of an email whether it is reached the receiver or not? Regards, sunil.

  • EPC3928 Time of day filter

    Hi, Is there a way to deny a certain IP or MAC address on a certain range of time during the day? Any help is welcome

  • Address Book - downloading vCard no longer displays updated/new contact

    On 10.5.6 and earlier, if I had an option in an application to Download a users vCard, I could click it, be given the option to add, review or merge with an existing contact. Address book would display the new/updated contact for verification/editing