Display Segment in Financial Statement

Dear FI Expert,
How to display Segment field in Financial Statement (F.01)?
If it can't be handled with standard report, is there an user exit for display Segment in Financial Statement?
FYI,
I can use report from tcode S_PL0_86000028 to display Segment, but it can't display item for all Segment, it displays item per Segment.
Thanks before.

Dear:
            First make sure that have you defined Segment in customizing SPRO in ENTERPRISE STRUCTURE. Then make sure that is segment being used in GL posting. Only then you will be able to fetch segment reporting in Financia statements. Revert back in case of any confusion.
Regards

Similar Messages

  • Display Financial Statement (S_ALR_87012284) in document currency amount

    I would like to display financial statement in document currency amount. (T-CD:S_ALR_87012284)
    Does anyone know how to do this?
    I don't want to use the special evaluation tab of that T-CD, as it is requested to specify
    rate and Key date for translation.  I just want to display the amount in document currency.

    Hi Ramanuja,
    I meant that for the fiscal year 2009 G/L accounts don't have any values in SAP.
    In this Company SAP has been installed in 2010 and in Financial Statements I'd like to obtain the comparison with the values of 2009.
    What to do?
    Thanks

  • Error in FSE3 - Financial Statement Version Display

    Hi,
    We have bee using Financial Statement Version DRL. But now the Client asked me to create another structure DRL1. I have created Financial Statement Version DRL1 in OB58.
    Now when i tried to Disply Financial Statement Version DRL1 in FSE3 transaction code, it is giving the below program error.
    Why it is giving the error like this? DO i need to do any settings after i create the Financial Statement Version DRL1? Kindly help me out.
    Internal Error in program SAPLFIBS number 5. Contact SAP...
    Message no. FE710
    Thanks
    Kishore

    Hi,
    The error is due to program error. Please use the SAP note 845051 for the solution and show it to the technical consultant.
    https://websmp130.sap-ag.de/sap(bD1lbiZjPTAwMQ==)/bc/bsp/spn/sapnotes/index2.htm?numm=845051
    Cheers
    Manoj Kaushik

  • F.01 - Financial Statements (Not assigned)

    Hi,
    Please give me any tip.
    I created a financial statement version, all accounts were included. I executed the transaction F.01 (Financial Statements) with mark in ALV tree control (list output), the balance sheet is displayed, I expand subtree, after each number of account exist 2 lines more: Number/Name of Company Code and under Not assigned.
    Does anybody know how to hidden these last 2 lines? Maybe layout, note......
    *I assined all accounts.
    Thank you so much!!!

    Thanks to try help me!!
    The configuration is only to "Show Total", this is not my problem, my problem is to use the option list output "ALV tree control" if I use this layout I have problem, others no problem, but the customer wants to use exactly this one.
    Tks
    Soraia

  • Daily Financial Statement Report

    I have defined a Trial Balance using a financial statement version. However, the report can only be generated by "posting period", I need to be able to generate my report by "posting date" so as to enable me see the trial balance on a daily basis. i.e The report should not be cumulative but should be generated daily, independent of another day. Is there a standard report to display this? If not, How can this be achieved?
    regards
    Akin.

    No standard reports which generates dialy financial reports.  You can develop your own reports with the help of your abapers

  • Financial statement version in fs00 how do i change the lanugage to english

    Hi Experts
    I am currently asked to train a beginners course AC010 for FI. Below is one of the tasks i have to take the students through.Please look at F is where my question is??
    Enter the new G/L account 700## in the financial statement version INT so that it
    appears as the correct balance sheet item when the balance sheet is run.
    1. The new account has to be entered in financial statement version INT. Enter
    it in the same financial statement item as reference account 70 000.
    a) If you have exited the previous screen, choose Accountingu2192Financial
    Accounting u2192 General Ledger u2192 Master Records u2192 G/L Accounts u2192
    Individual Processing u2192 In Company Code.
    Fill in the following data.
    Field Name Value
    G/L account 700##
    Company Code 1000
    b) Choose Change.
    Continued on next page
    68 © 2006 SAP AG. All rights reserved. 2006/Q2
    AC010 Lesson: G/L Master Records
    c) Choose Edit Financial Statement Version.
    d) Enter the following in the Select Financial Statement Version dialog
    box.
    Field Name Value
    Financial statement version INT
    e) Click Choose.
    If you did remain in the screen from the previous exercise, the financial
    statement should be automatically expanded to show you where the
    reference account, 70 000, is located in the financial statement version.
    If you have to call up the screen again, the financial statement version
    does not automatically open at account 70 000. In this case, execute
    the following step.
    f) Drill down to the Liabilities u2192 Equity Capital u2192 Subscribed Capital
    balance sheet item by clicking the folder icon in front of the balance
    sheet item.(ALL these are displayed in another language how do i change to english??????????????????????????????????????????)
    g) Select Subscribed Capital and choose Assign Accounts at the top of the
    screen. Insert in the line From acct. To acct. the interval 700## to
    700##. Select D & C (for debit and credit balance). If you do not see a
    free row where you can enter your account, use the Next Page icon at
    the bottom right of the dialogue box to insert an empty row. Do not type
    over an existing account, as you will replace it with your account!
    h) Choose Continue (Enter).
    i) Choose Save.

    Hello,
    If you want to change the GL account language, then FS00 check last tabs.
    If you want to change FSV language, then copy the FSV to another language in OB58
    Regards,
    Ravi

  • Financial Statement - FGI3 for fund balance reporting from FMGLFLEXT

    Hi Guys,
    We are on ECC 6.0 with PSM and new GL turned on. The issue is that my users want to see the same financial statement as they saw in classic GL with their R/3.
    SAP has a fund balance report or otherwise the financial statements for public sector with its ISPS components like fund and grants from FMGLFLEXT, which is the totals table.
    To arrive at the financial statements, we have a report group which can be run from FGI3 and it pulls values out of FMGLFLEXT and SAP's standard combination for slicing on the report feature are
    1. account number
    2. FS item/account description (the further click on this account name gives you account number)
    3. Funds and
    4. possible account assignments from FM like grants or business area depending on your active components.
    Is there a standard display, wherein, it gives a FS Item/Acct number/account name like the standard reporting feature in classic GL. It makes it so easy to read the financial statements. Since they being a report painter/writer reports, we can tweek them to get the desired output but shouldnt it be the standard feature of SAP to provide that.
    I was curious to know, if SAP delivers that reporting feature and i am not able to spot it or is it that we have to change it.
    It will be very helpful, we are going live in a very short time.
    Thanks

    Hello
    Business area balance sheet extracts are not legally or statutorily complete because there are certain GL account balances like, reserves, equity, some unsecured loans which are difficult to be assigned to a specific business area.
    Ideally, business area analysis is restricted to profitablity and an overview of assets & liabilities specific to BA.
    So your requirement is tough and even if you shift to PCA, these issues still arise.
    Since they are internal to the client, better look for workaround solutions.
    Reg
    Suresh

  • Financial statement  version:functional area

    Hi,
    I created a financial statement  version with functional area and run it(S_PL0_86000032 ) , most items are correct, however, the item which assigned function area always 0, this means that system can not get any data via function area. would anyone help me?
    Rgds,
    Wubin

    Hello
    If you want to define a financial statement version with functional areas, these functions are limited. You cannot use the following functions:
            Balance-Dependent Display
    You cannot display functional areas dependent on the balance, that is, assign them to a different item dependent on the balance.
    ·        Debit/Credit Shift
    You cannot define items to which you have assigned functional areas as debit/credit shift items.
    ·        Check for Completeness
    You cannot use the check for completeness for financial statement versions with functional areas.
    You also have to carry out the following additional activities:
           1.      When you enter the general data, set the Functional area permitted indicator.
    You then have the option of assigning either accounts or functional areas to an item in your financial statement version.
           2.      Assign the required functional areas or functional area intervals to your P&L items
    Before setting the indicator please go through this help link
    http://help.sap.com/saphelp_erp2005vp/helpdata/en/b5/688b8ea30d11d39759006094b969cf/frameset.htm
    regards

  • Financial Statement Hierarchy FSV for GL Accounting 0FL_GLV10

    Have loaded hierarchy of FSV from R/3 to BW. Hierarchy is getting displayed in 0GL_ACCOUNT. There is a second level node called Net Profit / Loss, where there is no child node. But when we run the query then some value comes corresponding to that node also under 0COA/0PLRESULT (which is some sort of a calculation or net off happening & value gets correspond to this node).
    Now this value is getting displayed, similarly here is a node getting displayed under Source of Funds node, called Share holders Funds, now a child node of this is P & L Profit which is similar to the earlier blank node i.e. without any child node. In R/3 side this corresponds to
    0COBSPLRESULT. But this is not getting displayed in the query. That particular node itself is not appearing in the query. In the query instead of appearing under the respective node this value is appearing under unassigned nodes.
    What checks can be made to bring the value in query corresponding to the hierarchy how it is in hierarchy screen ??

    I  would like to provide anaswer in detail.
    A Financial Statement Version (FSV) is Hierarchical arrangement of G/L accounts, in accordance with the legal regulations used to generate financial statements. Alternatively, the accounts can be arranged or grouped in accordance with requirements.
    FSV does not create any posting. It is a type of FI reporting.
    Creating FSV: General Ledger Accounting > Business Transactions> Closing --> Documenting --> Define Financial Statement Versions.
    If you are in India, you can use SAP standard India country version BAIN which has 'Tax depreciation' as statistical entry.
    If you do not plan to use SAP standard India country version, then you can create 'Tax depreciation' is an item entry.

  • Financial statement version in gl accounting

    hello all,
    What is a financial statement version in G/l accounting. How do we replicate it on BW side. I am trying to do reports like cash flow, net assets, and the functional consultant provided me with information saying that you will get financial statement version so we do we use that.
    Are there any particular tips that someone can provide to develop queries for there reports?
    Thanks in advance

    Have loaded hierarchy of FSV from R/3 to BW. Hierarchy is getting displayed in 0GL_ACCOUNT. There is a second level node called Net Profit / Loss, where there is no child node. But when we run the query then some value comes corresponding to that node also under 0COA/0PLRESULT (which is some sort of a calculation or net off happening & value gets correspond to this node).
    Now this value is getting displayed, similarly here is a node getting displayed under Source of Funds node, called Share holders Funds, now a child node of this is P & L Profit which is similar to the earlier blank node i.e. without any child node. In R/3 side this corresponds to
    0COBSPLRESULT. But this is not getting displayed in the query. That particular node itself is not appearing in the query. In the query instead of appearing under the respective node this value is appearing under unassigned nodes.
    What checks can be made to bring the value in query corresponding to the hierarchy how it is in hierarchy screen ??

  • Financial Statement Version Extract

    Hi,
    I have to down load the Financial Statement Version.
    We can see it using T-Code 'FSE3'.
    Requirement is to download the structure in CSV file.
    File layout is:
    PARENT,CHILD,DESCRIPTION OF CHILD
    Is there any BAPI or Function module available that gives the structure or any other way to get it.
    Will appreciate response.
    Thanks
    Rohit

    See report bellow, execute and see content of internal table <b>node_tab</b> before "WRITE 'Hello'.":
    REPORT ztemp_estructura_balance MESSAGE-ID fe.
    TYPE-POOLS:
      fibs.
    TABLES: t011, rfgbst.
    TYPES:
      t_flag TYPE c,
      t_bs_node_id TYPE fibs_bs_node_id,
      t_bs_node_tab TYPE t_bs_node_id OCCURS 50,
      t_bs_type TYPE i.
    TYPES:
      BEGIN OF t_bs_info,
    *   info about BS given out to clients
        ktopl LIKE t011-ktopl,
        xauto LIKE t011-xauto,
        type TYPE t_bs_type,
      END OF t_bs_info.
    CONSTANTS:
      true TYPE t_flag VALUE 'X',
      false TYPE t_flag VALUE ' '.
    DATA: versn LIKE t011-versn VALUE 'CTIY'.
    DATA: node_tab LIKE snodetext OCCURS 0 WITH HEADER LINE.
    DATA: bs_info TYPE t_bs_info.
    SELECT SINGLE * FROM t011
           WHERE versn = versn.
    *   Load the structure from DB
    PERFORM load_versn
            USING versn.
    *   Create the node table for the function module displaying the tree
    PERFORM create_node_tab
            TABLES node_tab.
    WRITE 'Hello'.
    *  Load the version (again)                                            *
    FORM load_versn
         USING  versn.
    * Load the version
      CALL FUNCTION 'FI_BS_LOAD'
           EXPORTING
                version = versn
           IMPORTING
                bs_info = bs_info.
    * Load the texts
      PERFORM load_versn_text.
    ENDFORM.                               " LOAD_VERSN
    *&      Form  LOAD_VERSN_TEXT
    * Load the texts of the version                                        *
    FORM load_versn_text.
      DATA:
        flg_langu_maint TYPE t_flag VALUE false,
        flg_sylangu_not_found TYPE t_flag,
        maint_langu LIKE sy-langu.
      CALL FUNCTION 'FI_BS_LOAD_LANGU'
           EXPORTING
                flg_langu_maint       = flg_langu_maint
           IMPORTING
                flg_sylangu_not_found = flg_sylangu_not_found
                maint_langu           = maint_langu
           EXCEPTIONS
                OTHERS                = 1.
    * if maintenance language was loaded, because sy-langu was not found
      IF flg_sylangu_not_found = true.
        MESSAGE s741 WITH sy-langu maint_langu.
      ENDIF.
    * if maintenance language is wanted, but is different from SY-LANGU
    * tell him
      IF flg_langu_maint = true AND
        maint_langu <> sy-langu.
        MESSAGE s742 WITH maint_langu versn.
      ENDIF.
    ENDFORM.                               " LOAD_VERSN_TEXT
    *&      Form  CREATE_NODE_TAB
    *       text                                                           *
    FORM create_node_tab
         TABLES node_tab STRUCTURE node_tab.
      REFRESH node_tab.
      DATA:
        root_id TYPE t_bs_node_id.
    * Get the root
      CALL FUNCTION 'FI_BS_GET_ROOT'
           IMPORTING
                root_id   = root_id
           EXCEPTIONS
                not_found = 01.
    * Recursively add nodes
      PERFORM add_node_with_subtree
              TABLES node_tab
              USING 1
                    root_id.
    ENDFORM.                               " CREATE_NODE_TAB
    *&      Form  ADD_NODE_WITH_SUBTREE
    * Recursively add a node with its subtree                              *
    FORM add_node_with_subtree
         TABLES node_tab STRUCTURE node_tab
         USING value(level) TYPE i
               value(node_id) TYPE t_bs_node_id.
      DATA:
        children_node_tab TYPE t_bs_node_tab WITH HEADER LINE.
    * Get the display info
      CALL FUNCTION 'FI_BS_NODE_GET_SNODETEXT'
           EXPORTING
                node_id          = node_id
                with_gl_accounts = rfgbst-glac_on
           IMPORTING
                attr             = node_tab
           EXCEPTIONS
                node_not_found   = 01.
      node_tab-tlevel = level.
      APPEND node_tab.
    * And do the same for its children
      level = level + 1.
      CALL FUNCTION 'FI_BS_NODE_GET_CHILDREN'
           EXPORTING
                node              = node_id
                with_gl_accounts  = rfgbst-glac_on
           TABLES
                children_node_tab = children_node_tab
           EXCEPTIONS
                node_not_found    = 01.
      LOOP AT children_node_tab.
        PERFORM add_node_with_subtree
                TABLES node_tab
                USING  level
                       children_node_tab.
      ENDLOOP.
    ENDFORM.                               " ADD_NODE_WITH_SUBTREE

  • Financial Statement Export Completed with Error

    Submit 'Financial Statement Export' with the parameter as following:
    Ledger Name:& Ledger Name
    Report: &Predefined FSG Report
    Period: &Period
    Rounding Option:Calculate Then Round
    Segment Override: Null
    Accounting Date:&Date
    Template:Balance Sheet Export
    Template Locale:Null
    Destination File Name:Q_ZCFZB.TXT
    The error message is '100:ORA-01403: no data found'.
    However, through 'NS2011 (Financial Statement Generator)' & 'Financial Statement Generator (XML Report Publisher)' ,Data of the same '& Ledger Name'、'&Predefined FSG Report'、'&Period' could be outputed successfully. And the template of 'FSG: Basic Template' was chosen since Balance Sheet Export couldn't be selected in ''Financial Statement Generator (XML Report Publisher)'.
    The questions are,
    1、How the error ''100:ORA-01403: no data found'' happened?
    2、Why is the two value set of 'Template' different?
    3、What't the mean by 'Destination File Name'?
    Many Thanks,
    Jing

    Submit 'Financial Statement Export' with the parameter as following:
    Ledger Name:& Ledger Name
    Report: &Predefined FSG Report
    Period: &Period
    Rounding Option:Calculate Then Round
    Segment Override: Null
    Accounting Date:&Date
    Template:Balance Sheet Export
    Template Locale:Null
    Destination File Name:Q_ZCFZB.TXT
    The error message is '100:ORA-01403: no data found'.
    However, through 'NS2011 (Financial Statement Generator)' & 'Financial Statement Generator (XML Report Publisher)' ,Data of the same '& Ledger Name'、'&Predefined FSG Report'、'&Period' could be outputed successfully. And the template of 'FSG: Basic Template' was chosen since Balance Sheet Export couldn't be selected in ''Financial Statement Generator (XML Report Publisher)'.
    The questions are,
    1、How the error ''100:ORA-01403: no data found'' happened?
    2、Why is the two value set of 'Template' different?
    3、What't the mean by 'Destination File Name'?
    Many Thanks,
    Jing

  • Maintain financial statement in sap

    dear all
    we work with the following concept when we post any entry we enter fund in fund field because we activate fund mangement  , i need to create financial statement from report painter from transaction code fgi4 and i need to make classification depand on fund so i faced error masseage ( no charectristic for fund but when i press f4 i display all fun so please try to solve it asap
    thanks

    HI,
    yes it works like ATGFICO said. As an addition to this process you can authorise a user to a number of financial statement versions (eg User A is allowed to maintain FSV A, user B FSV B, user C FSV A+B,...) to ensure that FSV for local needs is maintained there FSV for group needs is maintained by group accounting,...
    We make it this way, as the alternative to create / ALE-transfer every new account number to development system, maintain the FSV versions there and transport the changes to production system is time consuming. The advantage of the first thing is, that functional department can handle FSV maintenance, NO IT support needed.
    BR Christian

  • Financial Statement hierarchy not extracted correctly from ECC into BW.

    Recently, one of my clients modified a FS hierarchy in production environment by moving some nodes from revenue to expenses, but BW is not picking up the change.
    In ECC via transaction FSE3, one of our Financial Statement hierarchies shows three nodes - (Group Life_, Vehicle Plan only_, and Cost of Removal_) as Expenses. However, the BW extractor still shows these three nodes as Revenue and loads the hierarchy into BW that way as well.
    DataSource is 0GL_ACCOUNT_T011_HIER with field HIENM = AE03. When running RSA3 Extractor Checker in ECC, the displayed data still shows the three nodes in question as Revenue and not correctly as Expenses.
    Found SAP note 1061847 - Ind. For reversing plus/minus signs not extracted correctly. Applied note in ECC development environment, tested the extractor, and checked the load into BW, but the error regarding the nodes still exists after applying the fix.
    Appreciate any suggestions or thoughts from the community.
    Thanks!
    SAP landscape is as follows:
    SAP_BW     700     0009     SAPKW70009     SAP NetWeaver BI 7.0
    SAP_AP     700     0007     SAPKNA7007     SAP Application Platform
    SAP_BASIS     700     SAPKB70010     SAP Basis Component

    Thanks SDNBI. I reviewed the suggested OSS note 1037447, but I am not sure how it applies in my situation. The suggested note seems to address a problem with the display of transfer structure in BW. Our problem seems to be that the extractor on ECC is incorrectly extracting the hierarchy structure. When viewing the data in RSA3 extract checker in ECC, I see the three nodes in question incorrectly positioned in the hierarchy. Thus loaded the same incorrect way into BW. Yet, when I display the hierarchy through transaction FSE2, the three nodes are displayed correctly.

  • Division Wise Financial Statements

    Hello Gurus,
    My client requires Division Wise Financial Statements through Profit Centre.  Document spliiting is not active, leading ledger is active but the scenarios are not assigned in assign scenarios for Profit Centre.  Now we have assigned  the  scenario of profit centre.  But while creating sales accounting document for VAT and excise line items, profit centre is not flowed.   Please suggest us what we should for the same.
    Can I activate document splitting now.  Please suggest.
    Regards,
    Prasanna

    Hi Prasanna,
    One advise is when document splitting functionality is not active management demands reports at below company code level as in your case divisional financial statement then Profit Center should have been made mandatory in field statues otherwise there will be potential chance of line items missing the assignment.
    Your line item is not flowing to profit center for which you check the balance sheet accounts assignment in 3KEH. Check here whether you VAT and Excise accounts are lying here.
    If you are working on New GL functionality and there is a need for segmental reporting then it is advisable that you start working or activating Document Splitting functionality.
    might help you to go ahead..............
    Regards,
    Chintan Joshi.

Maybe you are looking for