Display Settings error

On my brand new S10e, when I boot up I get a Windows message that the Display Settings are set too low. I check the control panel and find the the settings are right 32bit and 1024x562 (if my memory services me right). I have removed and installed the video driver. No change. Anyone else with this issue?

Colonel, just realised I didn't answer your previous question - yes, I am driving both monitors from display port cables.
I've updated the NVIDIA Drivers to 9.18.13.1269. Unfortunately this hasn't made a difference (well, it has broken wake from sleep again, but it has not helped)
I've also installed the monitor drivers but this also has not made a difference unfortunately.
ptdh thanks for the information. The fact that I was able to drive a single monitor at 3840x2160 makes me suspect something else is afoot. Not entirely sure if the Pro2840m drivers would work at all on my monitor or even a good idea - from what I understand they are different panels?
Maybe there's just better inherent support in Win8 because of the drive for retina level everything. At the moment unfortunately I don't have time to go and install Win8 on a test drive just to check this.
I have a suspicion it might be a problem more with the Intel side of things thanks to the convoluted optimus display. But sadly I cannot force discrete at a low level because in their infinite wisdom Lenovo have removed that option from the BIOS.
Also tried installing the Intel drivers (not sure if the correct ones - here https://downloadcenter.intel.com/Detail_Desc.aspx?DwnldID=23764&lang=eng&ProdId=3319) but unfortunately due to the usual OEM/Vendor faffery they won't install on my system.
If anyone else has more input (any official comment from Lenovo rep? I have emailed support but it's been radio silence so far)

Similar Messages

Display settings not reatained

I'm runing my thinkpad with dual monitors when docked, and it doesn't retain the resolution I set for either monitor when the system is restarted. Is there a way I can set a mandatory display resolution for both monitors?

Hi claudsmum,
Welcome to the HP Support Forums, I hope you enjoy your experience! To help you get the most out of the HP Forums I would like to direct your attention to the HP Forums Guide First Time Here? Learn How to Post and More.
I will be happy to help you with the “unable to save display settings” error message. To find the correct graphics driver for you to install I will need to know your operating system.
Thank you,
Please click “Accept as Solution ” if you feel my post solved your issue.
Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
Thank you,
BHK6
I work on behalf of HP

Display settings not saving

I have just bought a Touchsmart 14-n055sa and I'm having problems with linking my laptop to my tv using the HDMI lead. When I choose the "duplicate" option in display settings, I get a message saying that it is unable to save my settings. I have contacted Microsoft who have told me that I need to download some drivers, but I'm not sure which drivers to download. Anyone got any ideas??

Hi claudsmum,
Welcome to the HP Support Forums, I hope you enjoy your experience! To help you get the most out of the HP Forums I would like to direct your attention to the HP Forums Guide First Time Here? Learn How to Post and More.
I will be happy to help you with the “unable to save display settings” error message. To find the correct graphics driver for you to install I will need to know your operating system.
Thank you,
Please click “Accept as Solution ” if you feel my post solved your issue.
Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
Thank you,
BHK6
I work on behalf of HP

Apps tab of Creative Cloud desktop helper constantly displays "Download error. press retry or contact customer support". I've quit CC desktop helper, restarted computer, checked network settings, relogged in. Cannot download any new apps or updates. HELP

Apps tab of Creative Cloud desktop helper constantly displays "Download error. press retry or contact customer support". As well as reloading, I've also quit CC desktop helper, restarted computer, checked network settings, relogged in. Cannot download any new apps or updates. please help.
System: Mac OSX 10.9.4. 3.4ghz intel core i7, 8gb ram

Hello,
Adobe has brought these new links in this matter:
Troubleshoot Creative Cloud download and install issues and
App doesn’t open; progress wheel spins continually
Please have a look there. If necessary and for further questions click through http://helpx.adobe.com/contact.html and if "open" please use chat, I had the best experiences. I quote from Preran: The chat button is activated as soon as there is an agent available to help.
Good luck!
Hans-Günter

TS2529 I am trying to set up a new iphone to my old iphone's settings. When i have tried to back it up it displays a error message saying that it cannot back up because the back up was not saved. Anyone have any ideas?

I am trying to set up a new iphone to my old iphone's settings. When i have tried to back it up it displays a error message saying that it cannot back up because the back up was not saved. Anyone have any ideas?

First backup the old phone to iTunes using right mouse click then backup after that restore from backup on the new device .

Monitor says VIDEO MODE NOT SUPPORTED after changing display settings

HELP! I am about to have a nervous breakdown with my mac mini! I hooked up the mac to my Philips LCD via DVI. No problem at all. But because the screen is only 15" I wanted to play around with the display settings a bit. So I changed the resolution from it's original 1204x768 to the one higher (not sure of numbers) and to my HORROR, I now can't get any picture at all - it says "VIDEO MODE NOT SUPPORTED". I have tried everything I can think of. I have rest the P-RAM, I have unplugged all cables, plugged the back in again, I bought the mac into work and hooked it up to my monitor and changed the resolution back to 1024x768 which is what it was on originally and that STILL didn't work. I can see the Apple logo and then it goes black and comes up with the error message. HELP! What am I doing wrong - I can't believe one click of a mouse button has rendered my display useless!!!

Welcome to Apple Discussions!
Try booting the mini without the display connected, and then, once the system is running, connect the display. This will often force the system to default to a low resolution, and then correctly detect the display when it is connected.
If that doesn't help, with the display connected, boot into safe mode (hold the shift key down when starting up) and once the system is running, change the resolution to 1024x768, and ensure the correct refresh rate is selected. Rebooting normally ought then to give you a good display.
If all else fails, boot into safe mode with the display connected, and then in the Finder's file menu, use the 'find' option to search for 'windowserver' (no quotes). You should get 2 or 3 results, including one with a string of alphanumeric characters. Move all of them to the trash and restart normally.

My server is displaying an error - what setting needs to be changed?

I have the problem posted below, that apple.com acknowledges, but there is no specific information on how to fix it. My server company does not know which setting needs to be changed. Can anyone help? This happened suddenly, and I did not even change anything about my webpage.
Some web servers may display an error on a website created in iWeb:
"Parse error: parse error, unexpected T_STRING in [filename].html on line 1."
The settings on some web servers may cause difficulty parsing the line in a published iWeb document that establishes XML compliance. If you get this error message on your published website, please contact the administrator of your web server.
This issue does not occur on sites published to .Mac.

See this thread:
http://discussions.apple.com/thread.jspa?threadID=1374430&tstart=0

Safe mode display settings not 'sticking' after restart?

Hi
I used a display setting not supported by my Mac mini and consequently had a 'out of signal' error on my monitor and restarted in safe mode, logged in and altered the settings.
When I restart the display settings do not 'stick' and I get the same error. How do I get the settings to stick? Have tried logging in as administrator and user with no joy!
Thanks Nigel

Hmm. Maybe that combination of changing resolution in Safe mode and resetting PRAM have a combined effect of some kind? Worth remembering for the future. Thanks for posting.

[Bug?] Windows display settings causes boolean text to overshoot

I built a program and transferred it to a coworker to test. When he opened it, there were several visual glitches including boolean button text and multiple y axis plot issues. After several hours of troubleshooting, I realized it was because I had my graphics settings on my desktop slightly different.
If you right click (Windows 7) on desktop -> personalize -> display, you will see an option to "Make it easier to read what's on your screen". Default in Win 7 is 125%. This sets LabVIEW application font to 20 instead of 15 (like 100% and 150%) do. As a result, it changes the look of your application.
Has this been observed before, and is there a fix? note: It also causes visual glitches on within LabVIEW development UI itself. If you look at the "Med (125%)" attached png, you will see that the bottom of Application Font" has been chopped off.
Attachments:
Small (100%).png ‏37 KB
Med (125%).png ‏36 KB
Large (150%).png ‏113 KB

Hi Bowen,
I can't open your pics, all I get is an error 400…
Your problem is a common one. Changing display settings in Windows has an impact on LabVIEW front panels due to changing font sizes. You have to live with it or you have to account for when designing your front panel!
Best regards,
GerdW
CLAD, using 2009SP1 + LV2011SP1 + LV2014SP1 on WinXP+Win7+cRIO
Kudos are welcome

Dropdown list dynamic domain Display Settings contains no values

Hi,
I want to create a dynamic domain on a viewobject (RefCodesByDomain), which is not based on an entity object.
When I test my bc4j-service everything works as expected.
The view object has a key attribute.
In the Application Definition Editor I am able to create a dynamic domain with the data-collection of RefCodesByDomain1 but I cannot select any attributes in the "Display Settings"-section.
Can you give me some advise on this matter?
Regards,
Romano

Steven,
I rebuild the project. I think it has something to do with importing business components.
What I did is the folowing:
1. In a existing project I extended the default base-classes to create our own layer
2. created a project called ModelShared
2a. configured the project to use the base-classes I created in step 1
2b. created an entitybased-viewobject (RefCodesByDomain)
2c. created bc deployment-descriptors
3. created a project called RelatieModel in the same workspace as ModelShared
3a. added dependencies to the deployment-descriptors as well as the project created in step 2
3b. configured the project to use the base-classes I created in step 1
3c. imported business components
Although I did not recieve any errors during the import of business components, I am unable to add the vo (RefCodesByDomain) to a service.
I do see the package which contains the vo but is has no entries.
Importing the business components to a new BC Project in a seperate workspace did succeed (I could reuse the vo).
I tested a little further and the folowing occurred:
4. I created a new vo in the ModelShared Project
5. I deployed the ModelShared
6. Restarted JDeveloper
7. Got the folowing error message in the console window when expanding a service in my datacontrol pallette:
INFO: oracle.adf.share.config.ADFConfigFactory No META-INF/adf-config.xml found
1-sep-2008 13:23:27 oracle.adf.dt.controls.DataControlsTreeWillExpandListener treeWillExpand
FINER: THROW
java.lang.NullPointerException
        at oracle.adf.dt.objects.JUDTViewReferenceAccessorDefinition.init(JUDTViewReferenceAccessorDefinition.java:108)
        at oracle.adf.dt.objects.JUDTViewReferenceAccessorDefinition.<init>(JUDTViewReferenceAccessorDefinition.java:98)
        at oracle.adfdt.internal.meta.bc4j.BC4JDataControlDefinition.createViewObjectDefinition(BC4JDataControlDefinitio
n.java:228)
        at oracle.adfdt.internal.meta.bc4j.BC4JDataControlDefinition.addViewObjects(BC4JDataControlDefinition.java:208)
        at oracle.adfdt.internal.meta.bc4j.BC4JDataControlDefinition.loadStructure(BC4JDataControlDefinition.java:110)
        at oracle.adfdt.internal.meta.bc4j.BC4JDataControlDefinition.getStructure(BC4JDataControlDefinition.java:407)
        at oracle.adf.dt.controls.treemodel.jsr227.JSR227DataControlTreeNode.loadChildNodes(JSR227DataControlTreeNode.ja
va:129)
        at oracle.adf.dt.controls.DataControlsTreeWillExpandListener.treeWillExpand(DataControlsTreeWillExpandListener.j
ava:32)
        at javax.swing.JTree.fireTreeWillExpand(JTree.java:2302)
        at javax.swing.JTree.setExpandedState(JTree.java:3000)
        at javax.swing.JTree.expandPath(JTree.java:1742)
        at javax.swing.plaf.basic.BasicTreeUI.toggleExpandState(BasicTreeUI.java:2189)
        at javax.swing.plaf.basic.BasicTreeUI.handleExpandControlClick(BasicTreeUI.java:2176)
        at javax.swing.plaf.basic.BasicTreeUI.checkForClickInExpandControl(BasicTreeUI.java:2130)
        at com.jgoodies.looks.plastic.PlasticTreeUI.access$801(Unknown Source)
        at com.jgoodies.looks.plastic.PlasticTreeUI$MouseHandler.mousePressed(Unknown Source)
        at java.awt.AWTEventMulticaster.mousePressed(AWTEventMulticaster.java:222)
        at java.awt.AWTEventMulticaster.mousePressed(AWTEventMulticaster.java:221)
        at java.awt.AWTEventMulticaster.mousePressed(AWTEventMulticaster.java:221)
        at java.awt.AWTEventMulticaster.mousePressed(AWTEventMulticaster.java:221)
        at java.awt.Component.processMouseEvent(Component.java:5485)
        at javax.swing.JComponent.processMouseEvent(JComponent.java:3126)
        at java.awt.Component.processEvent(Component.java:5253)
        at java.awt.Container.processEvent(Container.java:1966)
        at java.awt.Component.dispatchEventImpl(Component.java:3955)
        at java.awt.Container.dispatchEventImpl(Container.java:2024)
        at java.awt.Component.dispatchEvent(Component.java:3803)
        at java.awt.LightweightDispatcher.retargetMouseEvent(Container.java:4212)
        at java.awt.LightweightDispatcher.processMouseEvent(Container.java:3889)
        at java.awt.LightweightDispatcher.dispatchEvent(Container.java:3822)
        at java.awt.Container.dispatchEventImpl(Container.java:2010)
        at java.awt.Window.dispatchEventImpl(Window.java:1774)
        at java.awt.Component.dispatchEvent(Component.java:3803)
        at java.awt.EventQueue.dispatchEvent(EventQueue.java:463)
        at java.awt.EventDispatchThread.pumpOneEventForHierarchy(EventDispatchThread.java:242)
        at java.awt.EventDispatchThread.pumpEventsForHierarchy(EventDispatchThread.java:163)
        at java.awt.EventDispatchThread.pumpEvents(EventDispatchThread.java:157)
        at java.awt.EventDispatchThread.pumpEvents(EventDispatchThread.java:149)
        at java.awt.EventDispatchThread.run(EventDispatchThread.java:110)
java.lang.NullPointerException
        at oracle.adf.dt.objects.JUDTViewReferenceAccessorDefinition.init(JUDTViewReferenceAccessorDefinition.java:108)
        at oracle.adf.dt.objects.JUDTViewReferenceAccessorDefinition.<init>(JUDTViewReferenceAccessorDefinition.java:98)
        at oracle.adfdt.internal.meta.bc4j.BC4JDataControlDefinition.createViewObjectDefinition(BC4JDataControlDefinitio
n.java:228)
        at oracle.adfdt.internal.meta.bc4j.BC4JDataControlDefinition.addViewObjects(BC4JDataControlDefinition.java:208)
        at oracle.adfdt.internal.meta.bc4j.BC4JDataControlDefinition.loadStructure(BC4JDataControlDefinition.java:110)
        at oracle.adfdt.internal.meta.bc4j.BC4JDataControlDefinition.getStructure(BC4JDataControlDefinition.java:407)
        at oracle.adf.dt.controls.treemodel.jsr227.JSR227DataControlTreeNode.loadChildNodes(JSR227DataControlTreeNode.ja
va:129)
        at oracle.adf.dt.controls.DataControlsTreeWillExpandListener.treeWillExpand(DataControlsTreeWillExpandListener.j
ava:32)
        at javax.swing.JTree.fireTreeWillExpand(JTree.java:2302)
        at javax.swing.JTree.setExpandedState(JTree.java:3000)
        at javax.swing.JTree.expandPath(JTree.java:1742)
        at javax.swing.plaf.basic.BasicTreeUI.toggleExpandState(BasicTreeUI.java:2189)
        at javax.swing.plaf.basic.BasicTreeUI.handleExpandControlClick(BasicTreeUI.java:2176)
        at javax.swing.plaf.basic.BasicTreeUI.checkForClickInExpandControl(BasicTreeUI.java:2130)
        at com.jgoodies.looks.plastic.PlasticTreeUI.access$801(Unknown Source)
        at com.jgoodies.looks.plastic.PlasticTreeUI$MouseHandler.mousePressed(Unknown Source)
        at java.awt.AWTEventMulticaster.mousePressed(AWTEventMulticaster.java:222)
        at java.awt.AWTEventMulticaster.mousePressed(AWTEventMulticaster.java:221)
        at java.awt.AWTEventMulticaster.mousePressed(AWTEventMulticaster.java:221)
        at java.awt.AWTEventMulticaster.mousePressed(AWTEventMulticaster.java:221)
        at java.awt.Component.processMouseEvent(Component.java:5485)
        at javax.swing.JComponent.processMouseEvent(JComponent.java:3126)
        at java.awt.Component.processEvent(Component.java:5253)
        at java.awt.Container.processEvent(Container.java:1966)
        at java.awt.Component.dispatchEventImpl(Component.java:3955)
        at java.awt.Container.dispatchEventImpl(Container.java:2024)
        at java.awt.Component.dispatchEvent(Component.java:3803)
        at java.awt.LightweightDispatcher.retargetMouseEvent(Container.java:4212)
        at java.awt.LightweightDispatcher.processMouseEvent(Container.java:3889)
        at java.awt.LightweightDispatcher.dispatchEvent(Container.java:3822)
        at java.awt.Container.dispatchEventImpl(Container.java:2010)
        at java.awt.Window.dispatchEventImpl(Window.java:1774)
        at java.awt.Component.dispatchEvent(Component.java:3803)
        at java.awt.EventQueue.dispatchEvent(EventQueue.java:463)
        at java.awt.EventDispatchThread.pumpOneEventForHierarchy(EventDispatchThread.java:242)
        at java.awt.EventDispatchThread.pumpEventsForHierarchy(EventDispatchThread.java:163)
        at java.awt.EventDispatchThread.pumpEvents(EventDispatchThread.java:157)
        at java.awt.EventDispatchThread.pumpEvents(EventDispatchThread.java:149)
        at java.awt.EventDispatchThread.run(EventDispatchThread.java:110)8. In my other "fresh" bc project I was able to use the newly created vo.
Do you have any suggestions?
Regards,
Romano

Unable to save display settings and Multiple Monitors

Have Windows 7 RTM installed on my laptop and was working great with extending to my monitor. I took my laptop home and hooked it up to my tv and it was fine. Now when I bring it back to work I cannot get the monitor to work. Only the display on the laptop is working. Windows can detect the monitor, but I try to enable the monitor and when I select Apply I get an error message "Unable to save display settings". I am a local administrator on the laptop. How can I extend to my monitor!
Thanks

Hi,
Error message " Unable to save display settings" mainly indicates that you try to extend or duplicate the desktop to the two external monitors in addition to the laptop screen. Generally, laptop supports only two displays at one time due to hardware limitation. I
suspect that the issue occurs because the laptop remembers both configuration for your extended monitor and TV. To extend your monitor, you need to clear the multiple configuration for your laptop and then extend your display by changing your display
settings. To do this, please take the following steps:
Step 1. Delete registry key.
==================
1)Press Win + R to open a run box.
2)In the Run box, type regedit, and then click OK.
3)Locate the following registry subkey:
HKEY_CURRENT_USER\Software\Microsoft\MobilePC\TMM
4)Right-click the subkey that you located in step 2. Then, click Delete.
5)When you are prompted to confirm the delete operation, click Yes.
6)On the File menu, click Exit to exit Registry Editor.
7)Log off the computer. Then, log on to the computer.
Step 2. Extend your display by changing display settings.
====================================
1)Open Screen Resolution by clicking the Start button , clicking Control Panel, and then, under Appearance and Personalization, clicking Adjust screen resolution.
2)Click the drop-down list next to Multiple displays, click Extend these displays, and then click OK.
References:
KB 973782
Best Regards
Dale Qiao
This registry key does not exist in my Laptop and it still won't work. I have an Asus N53S
which has both Intel HD Graphics 3000 and an NVidia GeForce GT 540M. It appears that the limitation is actually there is no D-Sub / HDMI / Internal Monitor option like there is in Windows Display.

BlackBerry Desktop Software displays the error "Caught _com_error exception. Description(): (null): Error(): -2147319779 (0x8002801D). ErrorMessage(): Library not registered.:Source(): (null)." when attempting to synchronize organizer data

BlackBerry Desktop Software displays the error "Caught _com_error exception. Description(): (null): Error(): -2147319779 (0x8002801D). ErrorMessage(): Library not registered.ource(): (null)." when attempting to synchronize organizer data.Can someone help me with this?

Tried clean wipe and reinstall. Immediately after reinstall of DM, in setting up my 9900 "for the first time", I received the following error message...
"Either there is no default email client or the current mail client cannot fulfill the messaging request. Please open Microsoft Outlook and set it as the default mail client."
I opened Outlook 2013 and checked that it was the default mail client. It was already.
After going in and clicking to confirm default email client, I was allowed to proceed to configure organizer sync settings. I configured memo only (one way from device). I then received the same error message that I was receiving (per my original post in the last message). I've previously tried configuring only one type of organizer sync and not one of them completed a successful sync, so it can't be a bad entry in the calendar or contacts. I also tried deleting CICAL entries for all of email addresses other than my primary one. No difference. Also, prior to setup and sync, I confirmed that my 9900 was not on wireless sync.
I was hoping that this was an old issue and I could use one of the old work-arounds, so if anyone has any ideas for something else to try, please let me know.
In the mean time, I have to assume that it's something that's changed with Outlook 2013 (particularly given the new error message I reported above. I hope that someone at RIM is aware of these error messages and is working on a compatibility fix for Office 2013.
Thanks in advance,
Sheldon
Twitter: @sheldonbk
Twitter: @sheldonbk

ICI - How to display custom error messages in SAP CRM

Hello,
we are working on a custom Contact Center which interfaces with SAP CRM Version 7 with Enhancement Package over ICI.
The basic call functions like accepting, hanging up, holding and retrieving are fully implemented and are working already.
Our goal is to display error messages in the CRM so that clients know there is something wrong, for example why he can't be log in successfully (e.g. the telephony server isn't reachable).
We already found the ICI Documentation file which provides us the CRM SOAP error codes and tried to send SOAP Fault messages, but never got
them to screen.
Please find an attached example screenshot what we mean exactly, reproduced by trying to make a call with CRM user while BCM CDT isn't
running in the background.
Regarding to this topic we've the following questions:
- Is it possible to display custom error messages on the CRM or is this functionality limited to SAP?
- Could you provide us some further information on how to use this feature exactly (implementation details?) and how the SOAP XML should look like to get it work?
Thank you in advance!
Best regards
René Holy

NewUser7 wrote:
Please correct me if I am wrong
I need to create an entity adapter and attach an error handler with the adapter? or can i handle that in the event handler itself. I coulnt find any api for handling errorsYou can do it both ways but since we are talking about event handler now, then in 9.x you need to extend com.thortech.xl.client.events.tcBaseEvent class for creating a event handler. In tcBaseEvent class there are various flavors of handleError method. So use that as per my note earlier and you should be good.
HTH

Display Custom Error Message in OIM 11g

Hi,
I'm trying to display an error message from a validation event handler but seems that am missing something. When the "oracle.iam.platform.kernel.ValidationFailedException" is thrown from a validation handler an error message is displayed: "An error occurred". If an error code is provided (see code below) then the message looks like: "An error occurred. The corresponding error code is ERR-0001". I guess that some resource bungle with corresponding messages should be provided.
the code used:
package test;
public class UserGeneralValidationHandler implements oracle.iam.platform.kernel.spi.ValidationHandler
@Override
public void validate(long processId, long eventId, Orchestration orchestration)
throws ValidationException
String errorCode = "ERR-0001";
String message = "Simple validation message.";
ValidationFailedException ex = new ValidationFailedException(message);
ex.setProcessID(processId);
ex.setErrorCode(errorCode);
throw ex;
Q:
1.What is missing for complete solution?
2.What is the algorithm that used by OIM to find default or non default resource bundle?
3.How to change out-of-box validation messages? For a sample "The organization ABC does not exist." message is shown if non existing organization is provided during user creation and I'd like to have a different one.
Regards
Serge

rename OIMUI.jar to OIMUI.zip
find logging_en and loggin.properties.
Modify the "IAM-2050512" error message with your custom message
Find Agent and agent_en.properties.
Find Note[ERROR_SUBMITTING_REQUEST].text. Modify the message. Make sure the message must be the same with in logging.properties("IAM_2050512")
Deploy
change the OIMUI.zip to jar
replace the existing OIMUI.jar
login to weblogic and redeploy OIM (oim.ear)
no need to restart OIM server.
Test:
create a request in web console again, you must see the custom message when you hit the submit button
hope this helps.
-rad

Displaying Custom Error Message in ALV

Hello Experts,
Usually, when an error occurs in editable ALV, the standard WD ALV functionality marks the particular error cell in red and displays the error message.
I want the same functionality for custom error messages in event ON_DATA_CHECK. I'm able to display the message, but looking for a way to mark cells as well.
Please help....

Hello friend,
I think this link will help you much more clear on the coloring of the ALV concepts.
http://help.sap.com/saphelp_smehp1/helpdata/en/5f/ec57c72a1349c8bfdda56d976e9399/frameset.htm
http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/f0625002-596c-2b10-46af-91cb31b71393?QuickLink=index&overridelayout=true
Thanks,
Sri Hari

Display Settings error

Similar Messages

Maybe you are looking for