Display Settings Ethernet Controler T540p

So I have a nice new T540p that was a replacement for the Twist that had some faulty bios issues. Now I'm having issues with this display as well as the Ethernet controller. 
Link to image
Here are the drivers if you need any more information please let me know. I booted into the bios to see if maybe there is a display option and use the gfx card for the internal display. For some reason everything is using the Intel HD chipset instead of the 730m. Is there something that needs to be done? There was a screen replacement done about a week ago. Is there a different display port to use the 730m?
Ethernet controller has never worked. I installed the drivers but I get this error message whenever I do it says there are no Intel devices connected.
Please let me know if anymore information is needed.
Moderator note: images totalling more than 50k converted to links per forum rules:  Lenovo Community Participation Rules

If i understood you right:
go to your system-settings. There you will find the settings for the Nvidia Controll-Panel.
und 3D-Settings you will find the option for your prefered graphic card
- choosen by system
- always internal (=Intel HD)
- always high performance (=Nvidia)
seems like the auto setting isn't the best.
I just finished my second benchmark with the SAME SYSTEM.  (results are 635 Points vs. 918 Points regarding to the 3D graphic.
intel: www.passmark.com/baselines/V8/display.php?id=19408958307
nvidia: www.passmark.com/baselines/V8/display.php?id=19506717536

Similar Messages

  • IE 11 zoom default 125% based on display settings in control panel.

    Using Windows 7 Enterprise with 2 displays I have my display settings set to increase windows objects and text by 125%.  IE 11 appears to compound this by defaulting to 125% zoom on startup default.  If I set the display
    control back to 100 the default on IE goes back to 100% as well.  How do I get IE to default to 100 when the display is set for 125% Based on another post I checked IE ZoomFactor in the current user key and found it to be the recommended 100000.
    and ResetTextSizeOnStartup and ZoomOnStartup are set to 1.  Changes to these does not seem to have an effect.

    Hi，
    I test the issue and have the same result as yours, the value of ZoomFactor remains 100000. As a workaround, I change the value to Decimal:80000 (or Hexadecimal: 13880) then F5 to refresh the registry, reopen IE, it goes back to 100%, my registry setting
    as below
    [HKEY_CURRENT_USER\Software\Microsoft\Internet Explorer\Zoom]
    "ZoomDisabled"=dword:00000000
    "ResetTextSizeOnStartup"=dword:00000000
    "ResetTextSizeOnZoom"=dword:00000001
    "ResetZoomOnStartup"=dword:00000001
    "ResetZoomOnStartup2"=dword:00000000
    "ZoomFactor"=dword:00013880
    Yolanda Zhu
    TechNet Community Support

  • Bdc control for display settings

    Dear Experts,
    I have created a custom program of bdc recording that will automatically populate data to standard transaction VA01.
    The problem occurs when the user changed their monitor display settings, what happened was that some rows in Billing Plan tab will not be visible on screen due to change in display settings. 
    Is there a way to validate the appropriate display screen settings that have been used during the badi recording?
    Thanks.
    Kathy

    Hello Kathy,
    In the CALL TRANSACTION statement use OPTIONS addition for setting the CTU_PARAMS with the field DEFSIZE set as 'X'. This will ensure that a default screen size is used irrespective of the screen or monitor resolution.
    Vikranth

  • Read Only Display Settings Help

    Hello,
    I am trying to control what some users can see in a page. Right now I have an item field (Roles) display as checkbox. Roles is a field in my table that I created with RolesA, RolesB, RolesC. Note: these are not htmldb roles.
    In my Edit Page Item --> Read Only Display Settings --> Read Only Condition Type --> PL/SQL Function Body Returning a Boolean. Under Expression 1, I coded:
    return not htmldb_util.current_user_in_group(p_group_name => 'APP Admin')
    I want this item to read-only unless the user happens to be a member of group 'APP Admin'.
    The expression is not working. It seems that no matter what user is logged in they can modify this item. Is there another way I can do this for controlling what my RolesA, RolesB, and RolesC can modify? BTW, this item is a checkbox.

    Dung,
    That API seems to have a bug, it returns true/false/null, so you could use 'return not nvl(htmldb_util.current_user_in_group(p_group_name => 'APP Admin'),false)' to get a false value.
    Unfortunately there's another problem: using the read-only attributes for checkbox or radiogroup item makes them hidden. My suggestion would be to create another item that has disabled="disabled" in the HTML Form Element attribute in the item definition and display that item or the non-disabled item alternately, using conditions based on the current_user_in_group logic.
    Scott

  • Hide Display Settings not applied in User GPO

    Hello,
    I am trying to hide the display settings via a GPO so folks can't change the resolution. I set the "Disable the Display Control Panel" setting to enable, but users can still go to the Control Panel and change the display settings. Other parts of
    the GPO are applying, like the Ctrl+Alt+Del settings. The GPO has the loopback function set to replace. From my understanding, that should force all user settings in that GPO on everyone who logs into the computer, whether they are in that OU or not.
    Some settings apply, just not the Display settings. Is there something else I have to enable to get that working?
    Thanks
    Jason Watkins MCSE, MCSA, MCDBA, CCNA

    Hi Jason,
    It's been a while. How is it going? If it still doesn't work out, we can run command
    gpresult/h report.html to collect group policy result to check this. Note: to collect computer part group policy settings, we need to run the command with administrative privileges.
    In addition, regarding troubleshooting group policy issues, the following thread can be referred to as reference.
    [Forum FAQ] Common steps to start troubleshooting Group Policy application issues
    https://social.technet.microsoft.com/Forums/windowsserver/en-US/382c97e8-93c8-4022-b8fe-22401037d14c/forum-faq-common-steps-to-start-troubleshooting-group-policy-application-issues?forum=winserverGP
    Best regards,
    Frank Shen
    Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact [email protected]

  • Use GPO to set default language options, IME, display settings?

    new to GPO, we have a small Windows Server 2012 domain, all clients on Win7 or Win8.  All the clients require the following changes, anything I can automate this with GPO?  thanks
    Under Control Panel\Clock, Language, and Region\Language > Add Traditional Chinese HK SAR
    Under Control Panel\Clock, Language, and Region\Language > Traditional Chinese HK SAR > Options, Add Microsoft Quick IME
    Under Control Panel\Clock, Language, and Region\Language\Advanced settings - change language bar hot keys
        - CTRL+SHIFT+0 ------  To English (United States) - US
        - CTRL+SHIFT+0 ------  To Chinese (Traditional, Taiwan) - Microsoft Quick IME
    Under Control Panel > Region > Advimistrative > Change System Locale...  change to Chinese HK SAR for non-unicode programs
    Control Panel\Appearance and Personalization\Display > Change the size of all items, use custom 123%.
    Control Panel\Appearance and Personalization\Display > Update Text size to 8 for Title bars, Menu, Message Boxes, Icons, Tooltips
    I found this for the display scaling registry changes but it is for 125% and it uses 78 for the dword value, not sure about custom 123%.
    http://social.technet.microsoft.com/Forums/windowsserver/en-US/882f17a6-7465-4aa6-8cea-27aa37a28a4d/gpo-to-set-default-windows-7-display-scaling-to-125?forum=winserverGP

    Hi lilyl,
    According to your description, you would like to deploy some settings about language and display via GPO.
    According to my knowledge, the steps you provided are from Windows 8 clients. Based on my test, you can use the following methods to realize:
    Add Traditional Chinese HK SAR. Locate the registry key HKEY_CURRENT_USER\Keyboard Layout\Preload, and then add a String Value "next number"(which has not been used)=00000404.
    The region settings. Please refer to the similar post:
    http://social.technet.microsoft.com/Forums/windowsserver/en-US/ec6a290e-fc09-4be6-9f6a-1f532d338606/change-regional-settings-locale-settings-and-keyboard-layout-using-group-policy?forum=winserverGP
    The display settings. The post you provided tells us the related registry keys, and you should try to find the right value since you want to custom it.
    In addtion, please refer to the following article to learn to deploy a registry item:
    http://technet.microsoft.com/en-us/library/cc753092.aspx
    Regards,
    Lany Zhang

  • Can't get display settings / destop tab back after removing it with GPO

    I'm running ZEN32SP3. I'm just getting started with GPO in WinXP. I
    inadvertently removed the desktop tab in the display settings and can't seem
    to get it back. Can anyone help me out?
    Thanks,
    brad

    Thanks.
    "Rolf Lidvall" <[email protected]> wrote in message
    news:AIVEc.1848$[email protected]..
    > > I'm running ZEN32SP3. I'm just getting started with GPO in WinXP. I
    > > inadvertently removed the desktop tab in the display settings and can't
    > seem
    > > to get it back. Can anyone help me out?
    >
    > The setting is here:
    > User Configuration -> Administrative Templates
    > -> Control Panel -> Display
    > -> Hide Desktop tab
    >
    > The setting goes here:
    >
    > [HKEY_CURRENT_USER\Software\Microsoft\Windows
    > \CurrentVersion\Policies\System]
    > Value Name: NoDispBackgroundPage
    > Data Type: REG_DWORD
    > Value Data: 0 = disabled, 1 = enabled
    >
    > If you would like to start from square one
    > on the WS, this TID explains how to clean:
    > http://support.novell.com/cgi-bin/se...?/10059171.htm
    > Follow 1-5, skip 6 (unnecessary)
    >
    > Regards
    > Rolf Lidvall
    > Swedish Radio (Ltd)
    >
    >

  • Display Settings error

    On my brand new S10e, when I boot up I get a Windows message that the Display Settings are set too low. I check the control panel and find the the settings are right 32bit and 1024x562 (if my memory services me right). I have removed and installed the video driver. No change. Anyone else with this issue?

    Colonel, just realised I didn't answer your previous question - yes, I am driving both monitors from display port cables.
    I've updated the NVIDIA Drivers to 9.18.13.1269. Unfortunately this hasn't made a difference (well, it has broken wake from sleep again, but it has not helped)
    I've also installed the monitor drivers but this also has not made a difference unfortunately.
    ptdh thanks for the information. The fact that I was able to drive a single monitor at 3840x2160 makes me suspect something else is afoot. Not entirely sure if the Pro2840m drivers would work at all on my monitor or even a good idea - from what I understand they are different panels?
    Maybe there's just better inherent support in Win8 because of the drive for retina level everything. At the moment unfortunately I don't have time to go and install Win8 on a test drive just to check this.
    I have a suspicion it might be a problem more with the Intel side of things thanks to the convoluted optimus display. But sadly I cannot force discrete at a low level because in their infinite wisdom Lenovo have removed that option from the BIOS.
    Also tried installing the Intel drivers (not sure if the correct ones - here https://downloadcenter.intel.com/Detail_Desc.aspx?DwnldID=23764&lang=eng&ProdId=3319) but unfortunately due to the usual OEM/Vendor faffery they won't install on my system. 
    If anyone else has more input (any official comment from Lenovo rep? I have emailed support but it's been radio silence so far)

  • How do change the display settings such as color temperature and backlight brightness on an iMac monitor?

    My wife has an iMac (I don't know any other way to identify it e.g. model number), and she has this 3rd party calibration software that I'm trying to use. I am not used to a Mac, and I cannot find the display settings for the monitor. There are no buttons on the monitor, and when I go to preferences, I can only find the brightness control. I've googled this and cannot find a clear, simple answer. I have used every version of Windows (currently on 8.1 on my PC) and it's easy for me on that platform. I suppose it's just that I don't really know how to navigate Mac OS.

    ItsameMatt03,
    Choose Apple menu > System Preferences, click Displays, then click Color.
    Click Calibrate.Display Calibrator Assistant walks you through calibrating your display, then creates a calibrated color profile.For a more detailed calibration of your display, select the Expert Mode checkbox, which is at the bottom of the introductory text in the assistant.When the display profile is ready, it’s automatically assigned as your display’s color profile.
    Support Articles,
    If your Display doesn't look right: https://help.apple.com/machelp/mac/10.10/index.html?localePath=en.lproj#/mchlp29 06
    Calibrate Your Display: https://help.apple.com/machelp/mac/10.10/index.html?localePath=en.lproj#/mchlp11 09
    I hope that helps,
    Weston

  • Dropdown list dynamic domain Display Settings contains no values

    Hi,
    I want to create a dynamic domain on a viewobject (RefCodesByDomain), which is not based on an entity object.
    When I test my bc4j-service everything works as expected.
    The view object has a key attribute.
    In the Application Definition Editor I am able to create a dynamic domain with the data-collection of RefCodesByDomain1 but I cannot select any attributes in the "Display Settings"-section.
    Can you give me some advise on this matter?
    Regards,
    Romano

    Steven,
    I rebuild the project. I think it has something to do with importing business components.
    What I did is the folowing:
    1. In a existing project I extended the default base-classes to create our own layer
    2. created a project called ModelShared
    2a. configured the project to use the base-classes I created in step 1
    2b. created an entitybased-viewobject (RefCodesByDomain)
    2c. created bc deployment-descriptors
    3. created a project called RelatieModel in the same workspace as ModelShared
    3a. added dependencies to the deployment-descriptors as well as the project created in step 2
    3b. configured the project to use the base-classes I created in step 1
    3c. imported business components
    Although I did not recieve any errors during the import of business components, I am unable to add the vo (RefCodesByDomain) to a service.
    I do see the package which contains the vo but is has no entries.
    Importing the business components to a new BC Project in a seperate workspace did succeed (I could reuse the vo).
    I tested a little further and the folowing occurred:
    4. I created a new vo in the ModelShared Project
    5. I deployed the ModelShared
    6. Restarted JDeveloper
    7. Got the folowing error message in the console window when expanding a service in my datacontrol pallette:
    INFO: oracle.adf.share.config.ADFConfigFactory No META-INF/adf-config.xml found
    1-sep-2008 13:23:27 oracle.adf.dt.controls.DataControlsTreeWillExpandListener treeWillExpand
    FINER: THROW
    java.lang.NullPointerException
            at oracle.adf.dt.objects.JUDTViewReferenceAccessorDefinition.init(JUDTViewReferenceAccessorDefinition.java:108)
            at oracle.adf.dt.objects.JUDTViewReferenceAccessorDefinition.<init>(JUDTViewReferenceAccessorDefinition.java:98)
            at oracle.adfdt.internal.meta.bc4j.BC4JDataControlDefinition.createViewObjectDefinition(BC4JDataControlDefinitio
    n.java:228)
            at oracle.adfdt.internal.meta.bc4j.BC4JDataControlDefinition.addViewObjects(BC4JDataControlDefinition.java:208)
            at oracle.adfdt.internal.meta.bc4j.BC4JDataControlDefinition.loadStructure(BC4JDataControlDefinition.java:110)
            at oracle.adfdt.internal.meta.bc4j.BC4JDataControlDefinition.getStructure(BC4JDataControlDefinition.java:407)
            at oracle.adf.dt.controls.treemodel.jsr227.JSR227DataControlTreeNode.loadChildNodes(JSR227DataControlTreeNode.ja
    va:129)
            at oracle.adf.dt.controls.DataControlsTreeWillExpandListener.treeWillExpand(DataControlsTreeWillExpandListener.j
    ava:32)
            at javax.swing.JTree.fireTreeWillExpand(JTree.java:2302)
            at javax.swing.JTree.setExpandedState(JTree.java:3000)
            at javax.swing.JTree.expandPath(JTree.java:1742)
            at javax.swing.plaf.basic.BasicTreeUI.toggleExpandState(BasicTreeUI.java:2189)
            at javax.swing.plaf.basic.BasicTreeUI.handleExpandControlClick(BasicTreeUI.java:2176)
            at javax.swing.plaf.basic.BasicTreeUI.checkForClickInExpandControl(BasicTreeUI.java:2130)
            at com.jgoodies.looks.plastic.PlasticTreeUI.access$801(Unknown Source)
            at com.jgoodies.looks.plastic.PlasticTreeUI$MouseHandler.mousePressed(Unknown Source)
            at java.awt.AWTEventMulticaster.mousePressed(AWTEventMulticaster.java:222)
            at java.awt.AWTEventMulticaster.mousePressed(AWTEventMulticaster.java:221)
            at java.awt.AWTEventMulticaster.mousePressed(AWTEventMulticaster.java:221)
            at java.awt.AWTEventMulticaster.mousePressed(AWTEventMulticaster.java:221)
            at java.awt.Component.processMouseEvent(Component.java:5485)
            at javax.swing.JComponent.processMouseEvent(JComponent.java:3126)
            at java.awt.Component.processEvent(Component.java:5253)
            at java.awt.Container.processEvent(Container.java:1966)
            at java.awt.Component.dispatchEventImpl(Component.java:3955)
            at java.awt.Container.dispatchEventImpl(Container.java:2024)
            at java.awt.Component.dispatchEvent(Component.java:3803)
            at java.awt.LightweightDispatcher.retargetMouseEvent(Container.java:4212)
            at java.awt.LightweightDispatcher.processMouseEvent(Container.java:3889)
            at java.awt.LightweightDispatcher.dispatchEvent(Container.java:3822)
            at java.awt.Container.dispatchEventImpl(Container.java:2010)
            at java.awt.Window.dispatchEventImpl(Window.java:1774)
            at java.awt.Component.dispatchEvent(Component.java:3803)
            at java.awt.EventQueue.dispatchEvent(EventQueue.java:463)
            at java.awt.EventDispatchThread.pumpOneEventForHierarchy(EventDispatchThread.java:242)
            at java.awt.EventDispatchThread.pumpEventsForHierarchy(EventDispatchThread.java:163)
            at java.awt.EventDispatchThread.pumpEvents(EventDispatchThread.java:157)
            at java.awt.EventDispatchThread.pumpEvents(EventDispatchThread.java:149)
            at java.awt.EventDispatchThread.run(EventDispatchThread.java:110)
    java.lang.NullPointerException
            at oracle.adf.dt.objects.JUDTViewReferenceAccessorDefinition.init(JUDTViewReferenceAccessorDefinition.java:108)
            at oracle.adf.dt.objects.JUDTViewReferenceAccessorDefinition.<init>(JUDTViewReferenceAccessorDefinition.java:98)
            at oracle.adfdt.internal.meta.bc4j.BC4JDataControlDefinition.createViewObjectDefinition(BC4JDataControlDefinitio
    n.java:228)
            at oracle.adfdt.internal.meta.bc4j.BC4JDataControlDefinition.addViewObjects(BC4JDataControlDefinition.java:208)
            at oracle.adfdt.internal.meta.bc4j.BC4JDataControlDefinition.loadStructure(BC4JDataControlDefinition.java:110)
            at oracle.adfdt.internal.meta.bc4j.BC4JDataControlDefinition.getStructure(BC4JDataControlDefinition.java:407)
            at oracle.adf.dt.controls.treemodel.jsr227.JSR227DataControlTreeNode.loadChildNodes(JSR227DataControlTreeNode.ja
    va:129)
            at oracle.adf.dt.controls.DataControlsTreeWillExpandListener.treeWillExpand(DataControlsTreeWillExpandListener.j
    ava:32)
            at javax.swing.JTree.fireTreeWillExpand(JTree.java:2302)
            at javax.swing.JTree.setExpandedState(JTree.java:3000)
            at javax.swing.JTree.expandPath(JTree.java:1742)
            at javax.swing.plaf.basic.BasicTreeUI.toggleExpandState(BasicTreeUI.java:2189)
            at javax.swing.plaf.basic.BasicTreeUI.handleExpandControlClick(BasicTreeUI.java:2176)
            at javax.swing.plaf.basic.BasicTreeUI.checkForClickInExpandControl(BasicTreeUI.java:2130)
            at com.jgoodies.looks.plastic.PlasticTreeUI.access$801(Unknown Source)
            at com.jgoodies.looks.plastic.PlasticTreeUI$MouseHandler.mousePressed(Unknown Source)
            at java.awt.AWTEventMulticaster.mousePressed(AWTEventMulticaster.java:222)
            at java.awt.AWTEventMulticaster.mousePressed(AWTEventMulticaster.java:221)
            at java.awt.AWTEventMulticaster.mousePressed(AWTEventMulticaster.java:221)
            at java.awt.AWTEventMulticaster.mousePressed(AWTEventMulticaster.java:221)
            at java.awt.Component.processMouseEvent(Component.java:5485)
            at javax.swing.JComponent.processMouseEvent(JComponent.java:3126)
            at java.awt.Component.processEvent(Component.java:5253)
            at java.awt.Container.processEvent(Container.java:1966)
            at java.awt.Component.dispatchEventImpl(Component.java:3955)
            at java.awt.Container.dispatchEventImpl(Container.java:2024)
            at java.awt.Component.dispatchEvent(Component.java:3803)
            at java.awt.LightweightDispatcher.retargetMouseEvent(Container.java:4212)
            at java.awt.LightweightDispatcher.processMouseEvent(Container.java:3889)
            at java.awt.LightweightDispatcher.dispatchEvent(Container.java:3822)
            at java.awt.Container.dispatchEventImpl(Container.java:2010)
            at java.awt.Window.dispatchEventImpl(Window.java:1774)
            at java.awt.Component.dispatchEvent(Component.java:3803)
            at java.awt.EventQueue.dispatchEvent(EventQueue.java:463)
            at java.awt.EventDispatchThread.pumpOneEventForHierarchy(EventDispatchThread.java:242)
            at java.awt.EventDispatchThread.pumpEventsForHierarchy(EventDispatchThread.java:163)
            at java.awt.EventDispatchThread.pumpEvents(EventDispatchThread.java:157)
            at java.awt.EventDispatchThread.pumpEvents(EventDispatchThread.java:149)
            at java.awt.EventDispatchThread.run(EventDispatchThread.java:110)8. In my other "fresh" bc project I was able to use the newly created vo.
    Do you have any suggestions?
    Regards,
    Romano

  • Unable to save display settings and Multiple Monitors

    Have Windows 7 RTM installed on my laptop and was working great with extending to my monitor. I took my laptop home and hooked it up to my tv and it was fine. Now when I bring it back to work I cannot get the monitor to work. Only the display on the laptop is working. Windows can detect the monitor, but I try to enable the monitor and when I select Apply I get an error message "Unable to save display settings". I am a local administrator on the laptop. How can I extend to my monitor!
    Thanks

    Hi,
    Error message " Unable to save display settings" mainly indicates that you try to extend or duplicate the desktop to the two external monitors in addition to the laptop screen. Generally, laptop supports only two displays at one time due to hardware limitation. I
    suspect that the issue occurs because the laptop remembers both configuration for your extended monitor and TV. To extend your monitor, you need to clear the multiple configuration for your laptop and then extend your display by changing your display
    settings. To do this, please take the following steps:
    Step 1. Delete registry key.
    ==================
    1)Press Win + R to open a run box.
    2)In the Run box, type regedit, and then click OK.
    3)Locate the following registry subkey:
    HKEY_CURRENT_USER\Software\Microsoft\MobilePC\TMM
    4)Right-click the subkey that you located in step 2. Then, click Delete.
    5)When you are prompted to confirm the delete operation, click Yes.
    6)On the File menu, click Exit to exit Registry Editor.
    7)Log off the computer. Then, log on to the computer.
    Step 2. Extend your display by changing display settings.
    ====================================
    1)Open Screen Resolution by clicking the Start button , clicking Control Panel, and then, under Appearance and Personalization, clicking Adjust screen resolution.
    2)Click the drop-down list next to Multiple displays, click Extend these displays, and then click OK.
    References:
    KB 973782
    Best Regards
    Dale Qiao
    This registry key does not exist in my Laptop and it still won't work.  I have an Asus N53S
    which has both Intel HD Graphics 3000 and an NVidia GeForce GT 540M.  It appears that the limitation is actually there is no D-Sub / HDMI  / Internal Monitor option like there is in Windows Display.

  • Simple Question about my display settings

    I have a Mac OS - Version 10.4.11
    I accidently hit some button on my keyboard and it "inverted" the colors on my display. It's kind of hard to describe, but the clarity on the colors on the display look horrible. It's as if it's limited to the basic 8 colors.
    I've tried everything I can think of - display settings, color calibration...... and I just can't figure it out.
    Does anyone know how to restore the display to the original settings?

    Press the Option, Command, Control, and 8 keys simultaneously, or turn it off from the Seeing tab of the Universal Access pane of System Preferences.
    (30342)

  • Nokia 3120 classic display settings

    Hi!
    The "Nokia 3120 classic User Guide" (9207764, Issue 3) in chapter 6. Settings -> Display says:
    Sleep mode -- to save battery power, the display turns black when no function of the phone is used for a certain time
    If I understand correctly the purpose of that option, when it is set to on it should turn off the back light of the display when the phone is not used for some time (a few seconds). By default that option is enabled.
    I tried to disable that option (set it to off) but nothing changed -- the display light turns off very quickly, which is very annoying for example when reading/writing messages. To prevent the display light to turn off you need to press a key every few seconds.
    I also tried to disable the "power saver" option in the display settings but I didn't notice any difference either.
    IMHO, there is a bug in the phone firmware regarding those options. Moreover I thing that user should be able to change the time interval after which the display light is turned off in the sleep mode.
    Another issue with that phone behavior: Using an analog or digital clock as a screen saver (Settings -> Display -> Screen saver) is quite convenient because the default digital clock in top right corner of the display uses very small font. When the keyboard is locked, the screen saver activates after a few seconds of inactivity (that time interval should be adjustable too), but the display light turns off also, which is OK when the keyboard is locked. Now the question is how to turn on the display light (to see the clock in the screen saver) without turning off the screen saver at the same time? Currently you have to do the following:
    (1) press one of the navigation keys in order to turn on the display light
    (2) wait a few seconds in order to activate the screen saver
    The firmware version used is:
    V 07.16
    27-05-08
    RM-364
    Any comments?
    -- rpr.

    Can someone from Nokia please response to this thread? The lack of control over the display light duration is a huge disadvantage of the 3120. It sounds like a small issue, but it is really not. I would recommend anyone who is interested in the 3120 NOT to get it, for this exact reason.

  • G5 Freezes, display settings and videocard : A clue ?

    Hello,
    Before you begin to read this ( rather ) long post (sorry for that), i will summarize the final question :
    Can there be a relationship between freezes and monitor settings in system preferences ? Are there solutions to improve these settings ? what can be done ?
    *My experience* :
    After last Tiger updates (9 and 10), my Finder (?) froze very often.
    In April, for this reason, I made a Tiger "archive and install" installation.
    Nothing really improved.
    In July, after multiple freezes I uninstalled :
    -ATI monitor utility,
    -Optical Logitech mouse *LCC driver* (and come back to the cord original Apple mouse), and the
    -APE folder "*Application Enhancer*" installed in System files, which I could not imagine to be there, since I had uninstalled "APE" from preference panes under Panther and +never reinstalled it+ after that. But EasyFind showed it to me and Pacifist indicated me that in the LCC driver package there was a "call" to APE installation (and in the last ATI monitor crash report I had seen this ape mentioned).
    -dsl modem wifi card and come back to an ethernet connexion, and also
    -reinstalled a *mac OS X 10.4.10 combo* update,
    in spite of all these un-/installations, freezes were going on with a peak at 10 one day, leaving me convinced that something important in the G5 was totally dead.
    One morning, on start, the screen was totally black and the monitor power green led was even off. (I checked warranty for the monitor : 3 years on site until ... November 2007, at least that could be saved.)
    Before calling the shop where I had bought this *SyncMaster 213T* display, I wanted to be sure that nothing else was wrong. So, I did some test indicated on the Samsung paper manual (fortunately, there are still some...) i.e. : unplug the monitor from the computer and test it by itself ... I could see exactly the boxes that were indicated as "normal". So the monitor seemed to be "clean".
    After I had uninstalled all other devices such as : USB 2 hub, Sony active speakers, and, on a friend's (knowing much more things than me on Macs) advice, made ( done ? sorry ! ) some vigourous PRAM reset I could restart with a "normal" screen.
    The first thing I did, then, was to open the virtual monitor manual, in the trouble shooting session. Namely concerning compatibility between video cards and this monitor. There was something about frequencies unsupported by certain cards. I understood that the higher, the better. But to get the higher, I had to choose a lower Display resolution. In its native resolution (1600 x 1200), the Monitor pref pane proposed only 60 Hz; to get 75 Hz (the maximum frequency indicated in the pref pane) I had to downgrade the resolution from 1600 x 1200 to 1280 x 1024. So did I. After a last freeze, I restarted with PRAM reset. The screen was ok.
    And several weeks after, in August, I realized that, since that time, I had encountered NO freeze at all. At that time, I was sure that the "vigorous" PRAM reset had made the wonder.
    One day of August, I wanted to change my desktop image with a photo I had just taken. The photo size was wider than the display resolution and I could not see it entirely on the screen. So to get a total view of it, I changed the resolution size to the initial one (1600 x 1200 - freq. 60 Hz). And my photo was entire. Then, I wanted to read something in my newsreader ( Thoth , which I daily use). As a post window was too small to see the entire post and wishing to avoid scrolling, I dragged, as usual, the left lower side to resize this window and I saw the black border line figuring the new window ... but nothing else happened. The window did not resize and suddenly I realized that I was again in a freeze story. :-/
    The Apple mouse cursor was moving freely but nothing else happened. And no click was efficient in the display view (but I could hear - as before - its reactive noise inside the G5).
    I decided to wait a bit and dit it for about 20 minutes. Nothing went better and I had to shutdown and restart again, tried a "*fsck -s*" but there also, after a beginning of the process, monitor froze. Then, I decided to restart (with alt ) on a "safe" 2nd internal boot disk with a "clean installed" Tiger, which I keep for this kind of problems and from there repaired authorizations and checked the other disk (which appeared to be ok).
    Then I restarted normally on my "working" session. Opened iTunes, but as soon as I wanted to click on Mail in the dock : re-freeze.
    This time, when I restarted after shutdown (since the "force to quit" was unavailable), the first thing I did was to re-change the Monitor resolution and frequency (to 1280 x 1024 and 75 Hz). And from this time, mid-august, I had only one freeze, which occurred when I wanted to look at a genuine Apple screensaver (but for this, there are about two years that I had to abandon to look at them or at iTunes animations, that I miss ... snif) I just wanted to check if- now -with this display settings change, things were better, but no.
    My display is a digital Samsung SyncMaster 213T (21") plugged on the DVI ATI card port.
    Many thanks to those who have had the patience to read this and my apologize to those who have the feeling they have lost their time (and also for my approximative English).
    *Thank you !*
    PS : Since yesterday my SuperDrive, a Pioneer 106 D, (replaced one year ago by Applecare), seems to be definitely dead : a DVD appears like a text generic document in DiskUtility and does even not appear on the desktop although the DVD player opens, but on a "visualisation" window only (the name of the DVD, a video commercial one, which I could look at last week, did not appear in the window header but did in DiskUtility). And just before, another DVD made an horrible noise in the superdrive but nothing mounts on the desk, DVD player opened but I quickly removed the DVD because of the persistent noise (so I didn't open DiscUtility to see what happened). (Problems with this superdrive date from long).
    Can there be a link between this last problem and others above ?
    Message was edited by: Josy

    Thomas Bryant wrote:
    Hello! There are a couple of things you can do. One would be to run the Apple Hardware test to see if it comes back with anything. It's probably on one of the install discs if it's not on a separate disk. Second you can open the console (apps>utilities>console) and see if it's throwing a crash log that might help. The monitor and video card resolution could very well be causing the problem which would seem to indicate since a PRAM reset would clear the resolution settings. I think you'll have to find the resolution that works and stick with it. Tom
    Hello!
    For the AHT unfortunately impossible now with a dead Superdrive ... I had done it quite recently (one month) and all appeared to be ok. I'm thinking of buying an external one but don't know if it could help for this i.e: if an install DVD will run on an external drive.
    for the console: I don't well understand your "throwing" a crash log ... Is it "deleting" that you mean? Then which one?
    Just after writing this post, I read an interesting article by a developer about Tiger and resolution (an hidden feature) which I thought could be in relationship with my problem (I'm not a developer myself but to help localizing somme apps I had to install the DTools). Also saw in a forum a similar problem concerning a "younger" type of G5 monoproc 1.8, and an ATI RADEON card (younger too) and this resolution 1600 x 1200. It seems that several people (all gamers) with this configuration was meeting the same trouble. Sky punishment ??
    Well I think I will stick to pram reset then.
    Thank you very much for you answer (and your patience !)

  • AppleScript to toggle display settings?

    I often use Leopard's Screen Sharing capabilities via my Macbook Pro laptop to control my Mac Pro desktop computer. The problem is that my desktop computer is running a dual-monitor configuration, with a 1920x1200 primary screen, and a 2560x1600 30" Cinema Display as my secondary screen, which as you can imagine is pretty difficult to manage from the measly 1440x900 resolution of my laptop.
    I was hoping that someone might be able to help me create an applescript (that can be launched with a single click from either the Dock or a Finder Window Toolbar), which I could use to enable the Display Panel option to "Mirror Displays", and then to change the resolution of my Mac Pro's screen to 1600x1000 for reasonable viewing on my Macbook Pro.
    If two scripts need to be created for this to work (one to toggle display settings for remote viewing, and another to toggle them back to normal), then that would be fine, but if it's not any more or less difficult to have a single script handle both directions of the toggle, then that would of course be best...
    Any help that anyone can offer here would be sincerely appreciated! Thanks so much for your time!

    I haven't tested this as I don't have access to a monitor at the moment, but I found this on insanely mac via a google search.
    <pre>tell application "System Preferences"
    activate
    reveal anchor "displaysArrangementTab" of pane id "com.apple.preference.displays"
    tell application "System Events"
    tell application process "System Preferences"
    tell window 1
    tell group 1 of tab group 1
    click checkbox "Mirror Displays"
    end tell
    end tell
    end tell
    end tell
    end tell</pre>
    Been a few days with no replies so I thought that might work or at least be a nudge in the right direction. Cheers, Joel

Maybe you are looking for