Display Several Sales Orders from Same Business Customer TOGETHER in MD04

Hello
In MD04 is it possible to display several sales orders from same business customer together?
For instance one business customer order bikes for two times.
The Order-No are 12912(50st by 07/08/09) and 12913(100st by 10/08/09).
Normally after runnning of MRP(MD02), the planned orders are displayed seperately in MD04.
I want to display two orders together.
The reason is if some trouble happens in Production(for Ord-no 12912) and it cannot be deliveried on schedule, however Production (for Ord-no 12913) is going without trouble, the final-products for order 12913 should move for 12912.
If you have some good solutions, please share it.
Thank you for your advice.
Regards,

Hi Riyolshibashi,
Lets look at the two main scenarios, MTS and MTO.
In MTS, the general display filters are available in MD04. Standard SAP filters do not filter on 'customer'. I suspect this is because the concept would normally be illogical in a MTS environment. Planned orders do not exist to serve a customer, but to serve 'stock'. But let us not think about SAP and their logic.
SAP allows you to create customized filters, in IMG>Production>MRP>Evaluation>Filter>Define Display filter. Within this definition, under the "Addnl Selections' tab, you can tick 'Define addl selections in the transaction'. When you use this filter in MD04 display, then, one of the options available to you is to enter a specific Customer number, and then the display will only show the requirements from this customer. Since you have excluded all other customer's orders, all orders of a single customer will be displayed consecutively. Next to each other.
In the case of MTO, the 'filter-by-customer' concept makes more sense (although, not for the reason you have stated. You would have to find some manual method to convert a production order from supporting one sales order item, to supporting another sales order item. Possible but difficult). Anyway, the above mentioned customized filter would also work in an MTO environment.
Regards,
DB49

Similar Messages

Sales orders from one salesorg. to another in same ssystem

Hi Guys,
I got a requirement like we need to convert or recreate sales orders from one sales organization to another sales organization in the same system without having any impact on the existing system.
Any one have idea how to do it and is there any standard program to do this? is there any standard procedure for that>?
Thanks in advance.
Ram sri

Hi Ramgopal,
I never had this scenario, but the main step would be
Define 2 logical systems: a sender and a receiver
Assign one of them to the client
Set up distribution model
Generate partner profiles
Set up converter (not filter!) /Application Link Enabling (ALE)-> Modelling and Implementing Business Processes-> Converting Data Between Sender and Receiver
Here you can set up conversion rule for your sales org field.
All of this step could be done in transaction SALE.
Regards,
Peter

Invoice request based on multiple sales order for same customer

Hi Team,
I just wanted to know if we can create manual invoice request based on multiple sales order for same customer?
For project based invoice request i have create based on single invoice request.
Appreciate your input here.
Thanks,
Nitin

Dear Ratish,
Thanks for yr reply.
I already did that but it is not serving business purpose.
Comm payment - comes diff time than sales payment.
so ,I will post one entry customer will get hit with total amount Sales + commission
like below
Let say 10, 000 is the sales value and 500 is the commission
So , This entry will get posted
Customer Db- 10,500
Sales Cr- 10,000
Comm Income Cr- 500
But, As I said sales amt will be paid before so We need to clear it partially and some time customer pays also diff amount due to some defect.
So, We wont be knowing for which case we have or havnet received the payment against commission.
As , Customer account is got hit with total amount( Sales+ Comm..value).
Pls advise how to solve this.
Regards,
Sukh

PL/SQL API for Creating Sales Order in E Business Suite from BPEL

Hi,
I am new to Oracle SOA 11g.
I have done the Deleting Sales Order using PL/SQL API ( Oracle Apps Adapter ) [ API Name: OE_ORDER_PUB.DELETE_ORDER ]. While executing the BPEL, it is correctly deleting Sales Order in E Business Suite which is created EBS User Interface. I don't face any problem while deleting the sales order.
Now, in same way, I have to create a new Sales Order using PL/SQL API. I don't find any API's related to creating Sales Order in Order Management Suite (OM_PF) -->Order Management (ONT) --> Sales Order (ONT_SALES_ORDER) --> PL/SQL --> Process Order API (OE_ORDER_PUB) in Module Browser.
Please tell me which PL/SQL API to use to create new Sales Order in BPEL.
Thanks,
-- Gowtham

You may be on a different patch level. Can you ensure that you have applied all latest patches for your version?
See sample code at http://jyotioraapps.blogspot.com/2009/08/use-of-oeorderpubprocessorder-to-create.html
Hope this helps,
Sandeep Gandhi

Display list of sales orders for one particular customer using BAPI in WD

Friends,
i want to display list of sales orders for one particular customer, the materials ordered, quantity ordered, goods issue date of that particular order and contact information about that particular customer, using Webdynpro.
Please somebody send me related info,blogs,help links , to complete this task, this is very urgent.
Please help
Peter

Find the WD tutorials here...
<a href="https://www.sdn.sap.comhttp://www.sdn.sap.comhttp://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/library/webdynpro/web%20dynpro%20sample%20applications%20and%20tutorials.htm">Tutorials</a>

Displaying sales order from other system

Hi Experts,
I have a requirement of displaying sales order from other system. I will be fetching sales orders through a RFC call and displaying it in an ALV. on clicking of the sales order displayed from the ALV, I need to display it from the other system.
How can I go about this?
Please help.
Regards,
Rohan

rohan,
you already have answered most part of your question.
- displaying SO from other system through RFC:
create a remote enabled function in that target system. call this FM from your current system. (for RFC calls check this: [RFC help|http://help.sap.com/saphelp_nw04/helpdata/en/22/0425f2488911d189490000e829fbbd/content.htm]
displaying SO by double clicking in ALV:
--ALV's comes with a event USER_COMMAND. in this event you can pass your subroutine and in your subroutine you can do your coding... take help from sdn searches like :About FM ALV user_command Event
hope these helps
Somu

We are using EBS 12.1.3. When we input a sales order from a customer we input the sales order and specify the date the customer wants it. This isn't always the date that we intend on manufacturing it though. I need to put a customer due date in, but be

We are using EBS 12.1.3. When we input a sales order from a customer we input the sales order and specify the date the customer wants it. This isn't always the date that we intend on manufacturing it though. I need to put a customer due date in, but be able to put a date in another field that MRP can read in the event we choose to manufacture based on another date. For example, early.
Any help would be appreciated.

What you are experiencing is 100% related to Malware.
Sometimes a problem with Firefox may be a result of malware installed on your computer, that you may not be aware of.
You can try these free programs to scan for malware, which work with your existing antivirus software:
* [http://www.microsoft.com/security/scanner/default.aspx Microsoft Safety Scanner]
* [http://www.malwarebytes.org/products/malwarebytes_free/ MalwareBytes' Anti-Malware]
* [http://support.kaspersky.com/faq/?qid=208283363 TDSSKiller - AntiRootkit Utility]
* [http://www.surfright.nl/en/hitmanpro/ Hitman Pro]
* [http://www.eset.com/us/online-scanner/ ESET Online Scanner]
[http://windows.microsoft.com/MSE Microsoft Security Essentials] is a good permanent antivirus for Windows 7/Vista/XP if you don't already have one.
Further information can be found in the [[Troubleshoot Firefox issues caused by malware]] article.
Did this fix your problems? Please report back to us!

In third party sales order process how business come to know that the vend

Hi SD Gurus,
In third party sales order process how business come to know that the vendor has delivery the goods to the customer?
Where Business will check whether Vendor has delivered the goods or not to the customer?
Thanks & Regards,
Nivas

Hi,
Process
VA01 - Create sales order (Schedule line CS and item category TAS) >> ME52N - PR is generated after save of sales order >> ME21N - Convert PR in to P.O >> Then vendor will send goods to customer and will send invoice to our company >> MIRO - Invoice receipt from vendor >> VF01 - Final invoice to customer
When you enter vendor invoice then you come to know that vendor sent qty. same will be billed to customer(Billing relevance in item category should be F)
Kapil

Sales order According to the Customer PO

Hello all,
I am very new to SAP SD. I am using ECC 6.0 machine.
When i search and display any sales order, it contains PO number. I want details of this Purchase Order. For that i used 'BAPI_PO_GETDETAIL'. But after executing it shows me that 'PO Does Not Exist.'
After some investigation i realized that it is a Customer's Purchase Order. I need the details of the Customer PO. Is there any built in BAPI which will give me these details?? Or any table which will store the details of this PO so that i can write custom RFC to fetch data from the same??
Any Help??
Thanks,
Prashant

hello, friend.
do i understand correctly that you would like to see information related to the customer's PO?
1) normally, you receive a call from the customer with his PO or your salesman submits a customer's order with customer PO, and you create a sales order. you manually enter the PO in the field for PO in the sales order. the details of the order are what you enter in the sales order.
an alternative is that the customer PO details are first entered in an inquiry or quotation, which are later referenced/copied when you create a sales order.
that's about all of the details you can get. however...
2) if you use IDOCs or XI in receiving orders from the customer, the XI consultant maps the customer's PO number and targets the PO field in the sales order. if this is what you do in your project, then the XI consultant can help you with the PO details.
hope this helps you even a little.
regards.

User status transfer for sales orders from ECC to CRM

Hi,
We use business process with CRM sales orders that are transfer to ERP.
Users can change user status in the sales orders in ERP.
How we can replicate custom user status from ECC Sales Order to CRM Sales Order?
What is the steps to do this for CRM 7.0?
Denis

Hi,
We are creating quotation ZPQT in CRM which is then get replicated to ECC on saving it on “Accepted” status. In ECC we then create sales order of type ZPOR. Sales order gets replicated in CRM and also updates document flow. This sales order is called as “Project Sales Order”. PS team assigns WBS element to this order and does billing later on. Upon billing document is created sales order status in ECC changes to “Completed”. This is system status. But the issue is status of order ZPOR is CRM remains in status “Inprocess”. We want it to change to “Completed”.
We have similar scenario with order type ZOR. In this order after delivery and billing ECC assigns status “Completed” to sale order and same gets replicated to CRM.
In CRM for user status Completed we have assigned system status as FINI. Both ZPOR and ZOR has same status profile assigned at header and item level.
Our concern is if status is changing back in CRM for ZOR then why not for ZPOR. What is stopping system to do so?

Creating ERP Sales Order from CRM 7.0

Hi Experts,
We are implementing the scenario-Creating ERP Sales Order from CRM. My doubt is:-
Do we need to download the entire product data from ECC via middleware to implement this functionality?
Is it possible that we manually create few products in CRM with same heirarchy and category and avoid middleware data download?
My basic doubt is-what product information is passed to ECC from CRM when we create the ECC Sales Order? If only product id is passed, then we can avoid middleware data download for product from ECC to CRM.
Can anyone please provide me some pointers on this? What should be the approach-download product data from ECC to CRM or manually create product data in CRM?
Thanks and Regards,
Rohit

I´m trying to figure out the ERP Sales Order Scenario in CRM, i found the following link (sap.help) to customize the ERP sales Order in CRM, it´s a quickly guide supported by SALESPRO but in my case does not work, if somebody knows how to retrive the Order in IC i´ll appreciate.
Here a quick Guide -->
Prerequisites
You can directly create and change an ERP sales transaction in SAP CRM once you have carried out the following:
You are using SAP ERP for your Quotation and Order Management.
You are using SAP CRM.
You have assigned the relevant ERP sales transactions to a profile.
You do this in Customizing for CRM, by choosing Customer Relationship Management Transactions Settings for Sales Transactions Define Profile for ERP Sales Transactions .
You have defined an RFC destination.
You do this in Customizing for CRM, by choosing Customer Relationship Management CRM Middleware and Related Components Communication Setup Define RFC Destinations .
You have defined a business role by copying the standard business role SALESPRO to your own. You make this setting in Customizing for CRM, by choosing Customer Relationship Management Business Roles Define Business Role .
You have defined cross-system copy control of transaction types.
You do this in Customizing for CRM, by choosing Transactions Settings for ERP Transactions Maintained via CRM Cross-System Copy Control for Opportunities and ERP Transactions
I want to see the screens or video regarding with this scenario.
Regards,
Memo

Migrate all Open Sales Orders From Legacy System (SAP) To SAP System using

Hi Experts,
             I've to Migrate all Open Sales Orders From Legacy System (SAP) To SAP System using Business Objects with a new SALES ORDER DOCUMENT NUMBER referencing the older one.
           I'll get all the required data with field in an excel file.
             Does any standard transaction exist for it ? Or how to go ahead with it ?
Thanks and regards,
Jyoti Shankar

Hi
If you are checking for CREATE option then Sales Doc Type
For more Info goto SWO1 transaction -> BUS2032 --> DIsplay --> Execute --> There SELECT the method which you want to perform... There you can fine the MANDATORY parameters also....
Or in DISPLAY mode PLACE Cursor on the Required Method and CLick the PARAMETERS button on toolbar...
That will show the MANDATORY parameters...
Reward if helpful....
Message was edited by:
        Enter the Dragon

Error while transferring SALES ORDER from ECC to SCM

Hi Experts,
I am working with SCM4.0 and ECC 5, while i transferring the sales order from ECC5 to SCM ,it encounters with the following errore message.
<b>Sales order M-10 1000: Integration model does not contain material master
Message no. XC100
Diagnosis
To ensure a consistent dataset in SAP APO, the material master data for filter object Sales order M-10 1000 also has to be known in SAP APO. In the current case no entry was found for the combination in the models that were checked.
System response
Object Sales order M-10 1000 cannot be transferred correctly.</b>
Any kind of suggestions would be appreciated well.
Thanks in advance..
Regards,
A.Fahrudeen

Hi Fahrudeen ,
I hope the master Data like Material and Location and Customer are not CIFed to APO prior to Sales order or else while ciffing the sales order you have not selected the sales order radio button and same time only enter the Material ,location and customer wothout the tick on filter objects for Mat/Loc and Cust.
Hope this helps..
Regds// Digs...

Problem while creating a Sales Order from RFC

Dear All,
I get an error ( Errror ID "TD" Number "600" ) "Text XXXXXXXXXX000001 ID X106 language EN not found" whenever I try to create a Sales Order for a particular Customer and Material.
But when I create Manually using VA01 for the same details, a Sales Order is created Successfully.
The error is coming from the Standard Function Module "SD_SALES_ITEM_MAINTAIN".
Please let me know if any of you have come accross similar problem and if yes, please provide me a solution.
Thanks and Regards,
Dinakaran.R

Hi Dinakaran,
How ru passing the values in the RFC????
pass the item details through the tables option of FM...else it will give the error...
Regards,
Vamshi

Replication of BP and Sales order from CRM to R/3

Hello everyone,
I have a peculiar condition in my hands.The requirement is to replicate 10 business partners from crm to R/3 ,then the next 4 Business partners need not be replicated and then the next three replicated..How do we do this kind of replication....
One thing more regarding the replication of sales order.When we save a sales order in CRM,is it automatically replicated to R/3 or do we need to release it manually??
If yes,then if we do not want to replicate the sales order from crm to R/3,then what will we do?
Consider that all the middleware settings are configured and working fine..
Puneet

Hi Bokhal,
Please consider my answer from your recent thread dealing with apparently the same issue :
Hi Bhokal,
For filters in uploads please consider below:
For Filtering the BP-upload, use the Administration Console
(tx. SMOEAC) in the corresponding subscription of the "All Business
Partners (MESG)" publication assigned to the R/3 site.
Some publications (and the replication objects they are based on) are
delivered as type "Simple bulk" which does not give you the opportunity
to assign criteria values for filtering.
You might have to re-create the publication. To do that:
1) First delete the subscriptions "All Business Partners (MESG)" and its
publications & the replication object.
2) Recreate the replication object as type "Simple intelligent".
3) Afterwards you can create a new publication via wizard of type
"Simple intelligent (msg)" assigned to the BDOC-Type BUPA_MAIN. Then,
you will be able to select some "filter criteria".
The reason for deleting the "old" publication is, that you
are not allowed to assign a BDOC-Type to more than one publication.
4) But please keep in mind that there is no realignment supported. So
you should only use fields for filtering, which cannot be changed
afterwards.
This is the "simple" solution for filtering on fields. This
will not provide complex filter criteria.
If you need this, you shall create a filter function in R/3- and/or
CRM-Inbound and -outbound.
If you want to keep the control about the upload trigger, you can add an
additional module in transaction CRMC_BUT_CALL_FU, position > 200000.
BUPA_MWX_BDOC_BPS_FILL_CENTRAL. Within this new module, you can delete
all partners within the complex structure that you don't want to upload.
Hoping that above will be helpful.
Best regards
Christophe Sturzel

Display Several Sales Orders from Same Business Customer TOGETHER in MD04

Similar Messages

Maybe you are looking for