Display single line item in 2 rows in table in Adobe form

Hi Experts am working on Adobe forms, my requirement is to display a table, but the issue is I 've 8 fields in my table and I want to display 3 in first line and 5 in second line. I could try with changing margins width and height but got no result as expected. Please help me out this is urgent for me.
Thanks in advance
Phalani M

Sarath, as I mentioned my requirement is to display a table row in 2 lines, per suppose I have 5 line items then I want to display them in 10 (2*5) lines, same thing I want to display header also in 2 lines.
Phalani M

Similar Messages

GR can not printed for PO-Multiple account assignment on single line item ,

Hi!
I made a pr with single line item with 3 account assignment on percentage basis.I created a PO against .GR non valuated was automatically ticked so no account assignment was created at the time of GR posting.
Can I make a valuted GR against PO line item with multiple account assignment.
I faced another problem .I displayed the GR and after ticking out put check box in the general data page of the GR doc. the output is being saved but the update is terminated immediately.and no output page is generated in this item level.This output problem is not there at the time of single account assignment at PO line item.
Can you please let me have the solution ?
Thank snd regards,
Suranjana

> I made a pr with single line item with 3 account assignment on percentage basis.I created a PO against .GR non valuated was automatically ticked so no account assignment was created at the time of GR posting.
When you are having the multiple account assignment, then the system will force you to have GR-non valuated indicator being flagged which results in the fact there is not any FI document at GR posting stage and this is the standard feature of SAP.
> Can I make a valuted GR against PO line item with multiple account assignment.
No, not at all. The disability of GR indicator can be set in OME9 with account assignment category
> I faced another problem .I displayed the GR and after ticking out put check box in the general data page of the GR doc. the output is being saved but the update is terminated immediately.and no output page is generated in this item level.This output problem is not there at the time of single account assignment at PO line item.
In fact, it is possible to maintain multiple account assignment for each and every PO line item by selecting the 'Multiple Account Assignment' button in the 'Account Assignment' View of the Item Detail of PO. However, for such multiple account assignment selection, no accounting document will be generated upon GR maintenance. This can only be done during IR via LIV process.

Single line item for multiple line item payment.

Hi
I have booked the 3 vendor invoices (in FB60) for a single vendor. Now today i paid (with F-53) all the three invoices together. One payment document number was generated.
However when i saw the vendor line item, i saw that three debit line items was generated for the clearing the open invoices (i..e 3 credit line items). so when i say vendor line item report, there were total 6 cleared line items (3 for credit i.e invoice and 3 for debit i.e. payments)
But is it possible to get single debit line item for all the three invoices cleared. If yes, please let me know how i can get it.
If i will have one single line item for payment, vendor report would be simpler. Please help

Hi,
1. If you do payment through F-53, then each invoice have separate payment line item. This is not avoidable. If you do payment through F110, then you can group the line items for payment, so there only one payment line item for many number of invoices.
2. While clearing through F-44, system is generating automatic line items because, there are exchange rate fluctuations. You can't avoid these line items, as these automatic line items only match Debit and Credit amounts in order to post the document.
Rgds
Murali. N

Asset Creation in PR and PO and MIGO as a single Line item with "N" qty

Hi All,
In Purchase requestion ME51N
Now we are creating "n" number of assets ( All are same item but "s.no" will vary) with "n" number of line item.
Instead of this I have to enhance to create only one line item( For same item) with "n" quantity.
for the ASSET account Assignment we have to create Asset(Temp no) for the each item/quantity(if the same item).
as well as if they are going to create a PO with ref to PR they have to see all the "n" number of asset no.
In MIGO creation for each asset we have to assign S.No and Asset Tag.
How enhance the functionality in PR,PO and MIGO as well as in Invoice.
Is it any User Exit/BADI is available for PR/POand MIGO to show all the "n" number of assets for a single line item.
Kindly help me to give details to proceed further.
Thanks in advance.
sharma

Hi Sharma,
What i understand from your question is, you want to create a single line item in PR and PO. But the qty would be > 1.
Each single qty would have its own asset number in account asssignment tab of item details of PR & PO.
This is what you are expecting...Right???????????????
Then this is possible with certain limitations.
While creating PR, enter only one item with more qty.
In item details section, in account assignment tab, on top left corner, there will be a button called Multiple account assignments.
Click on it, then it looks like a table, where you can enter more than one line. (each line will have its own asset no)
And choose option Distribute on qty basis for field Distribution.
So that you can enter 1 qty for each line. ( Ex: if you created one line item in the item level with 10 qty, you need to maintain 10 line here, each qith 1 qty and diff asset no).
The only limitation to this is, the GRN would be treated as non valueted. So when you make GRN there wwould not be any accounting doc. ( means no use of GR/IR clearing account as like normal for POs)
when you prepare MIRO, all the assets will be capitalised and vendor credited.
But in case if you receive partial invoice, then you have choose manually in MIRO. which asset is ot be capitalised.
After entering the PO number in MIRO, there will be one line will be appeared with full qty. in the same line, move till the end of line, there you will have one button called Account assignments.
Choose and go there, here you can choose which individual asset line to be considired.
This will resolve your issue.
Thanks,
Srinu
SRBORIGI_MULTIPLE ACCOUNT ASSIGNMENTS

FBL5N - in Rule set - It is a Display customer line items

Dear All,
We observed that FBL5N - Display customer line items in Standard SoD rule set under function AR07 addressing a risk of S022.
Unless there are t-codes of FD03 or FB02 this t-code does not allow to change the payment terms of the customer.
We are having a challenge from the client that FBL5N is a display t-code and why it is there in rule set.
Has anybody came across this scenario? If yes, what is the underlying risk for this FBL5N independently.
Is there any SAP Note for this t-code like ME23N from SAP.
Thanks and Best Regards,
Srihari.K

Hi Christian,
We checked the authorization objects as well enabled in GRC rule set as below:
F_BKPF_BUK - Docume t Authorization document for company codes - 01 or 02 - Enable.
Inspite of this access, FBL5N cannot be used to change the document for payment terms and assignments without FB02 t-code
assignment in the role.
Independently FBL5N cannot be used for any change or create activity except Display customer line items.
Please advise
Thanks and Best Regards,
Srihari.K

In Capital P.O - Multiple asset number in a single line item

Hi friends,
My Client is using SAP 4.7. In capital P.O selecting account assignment as 'A' asset and entering in description as Laptop 5 Qtys in a single line item. in item details account assignment tab its asking to enter asset. I'm able to select only one asset number. But my client requirement is it should ask to enter 5 asset number....
Pls anyone give solution for the above scenario....
very urgent.... pls

Hi,
1st check in OME9 t.code for account assignment A, the selection of 2(Multiple account ***)in field ID: AcctAssgt Scrn and Distribution field as 1 and save.
Then during capital P.O. creation for single line item & in Item details TAB, in account assignment segment, you can enter qty with asset number (A1) with G/L account for 1st Line and for 2nd line keep qty. with asset number(A2) with G/L account ( different G/L Account) OR enter qty with asset number (A1) with G/L account for 1st Line and for 2nd line keep qty. with another asset number(A2) with G/L account (same G/L Account)
Option-1----> In account assignment segment , As you needed
G/L account----
Asset
12345u2026u2026u2026u2026u2026u2026u2026u2026A1
12346u2026u2026u2026u2026u2026u2026u2026u2026A2
12347u2026u2026u2026u2026u2026u2026u2026u2026A3
12348u2026u2026u2026u2026u2026u2026u2026u2026A4
12349u2026u2026u2026u2026u2026u2026u2026u2026A5
Having a concept that GR is non-valuated and accounting entries in invoice (without tax) are:
Vendor A/C: Cr
G/L account (12345): Dr
G/L account (12346): Dr
G/L account (12347): Dr
G/L account (12348 ):Dr
G/L account (12349 ):Dr
Option-2---> In account assignment segment , You can have also
G/L account----
Asset
12345u2026u2026u2026u2026u2026u2026u2026u2026A1
12345u2026u2026u2026u2026u2026u2026u2026u2026A2
12345u2026u2026u2026u2026u2026u2026u2026u2026A3
12345u2026u2026u2026u2026u2026u2026u2026u2026A4
12345u2026u2026u2026u2026u2026u2026u2026u2026A5
Having a concept that GR is non-valuated and accounting entries in invoice (without tax) are:
Vendor A/C: Cr
G/L account (12345): Dr
Regards,
Biju K

How to display a line item in the billing calculation ?

Hi Experts,
My client requirement is to just display a line item in billing without affecting the total invoice amount. ( line item should just show up, no calculation should be included).
Regards,
Farooq

i agree on the rate step fr the calculation you would like to see the line item check the variant control, it usually has the option to write a line item. depending on the variant.
bobby r.

BAPI_BILLINGDOC_CREATEMULTIPLE, creating a Bill doc with a single line item

Hi there,
I am trying to create a Billing document with reference to Sales document using this BAPI (BAPI_BILLINGDOC_CREATEMULTIPLE)
..but the generated billing document is creating only single line item where as the original Sales document is containing a Two line items, ie. 1 main line item an a Sub line item for this .
I am passing the Values mentioned below..
As per requirement is need to create a Pre invoice or a Proforma with Provided Sales Document.
it_billingdata_in-ORDBILLTYP = Proforma/Preinvoice
it_billingdata_in-REF_DOC = Reference Sales doc number
it_billingdata_in-REF_DOC_CA = Reference Sales document category('C').
Can some one please suggest any thing else do i need to pass apart of these field..
Appreciate of some one answer me.
thanks
Srinivas

Hi Srinivas,
You need to loop on the internal table 'it_billingdata_in' based on the Sales Order line items and pass the value to 'it_billingdata_in-REF_ITEM' for every line item of the Sales Order.
Hope this helps.
Regards,
Pranav.

Single line item for multiple open items in app

we have three open items   to vendor x 100001000010000
But we are paying to vendor only 10000100005000
At the time of entry system showing
Vendor account 25000
             To    Bank account       20000
             To    Bank account         5000(here we paying partial amount of 3rd open item)
But my Clint requirement is system should post only single line item for bank account 25000 for reconcilation purpose
Would you please suggest where we need to do customization?

Hi Anantha,
How are you making the payment which transaction you are using ? Both Manual & Automatic payment
the suggested solution is go for split payment terms. configure using OBB8 and OBB9
Hope this helps
pbb

How to not to display any line items for val flds values are zero in KE30?

Dear All,
In KE30,in one of my reports, i do not want to display such line items for which all values are zero for all val flds, it should only display the line items for which there is any value, i have tried Zeros hide in KE35 in formatting menu>other format>hide zeros, but unofrtunately it didnt came out.
Regards
Rashid
Edited by: rashinuet on Feb 20, 2012 4:38 PM

Dear Abhishek,
I have tried that as well in ke35 and made this option activated on my val flds like sales revenue for hide zero values, but it didnt came out as well, then in i tried ke32 change report >Extras menu>form settings, this adopts all the settings in the report from the form you have assigned, but this is not working, i am failed to understand what has gone wrong.
Regards

Is it possible multiple line items debit & single line item credit and different cost centers and different profit centers in fbcj

Hi all ,
I have a requirement to Post Cash Journal Document using FBCJ tcode.
Is it possible multiple line items debit & single line item credit and different cost centers and different profit centers
for exp:
pk   GL a/c   description       amount   cost center profit center
40 400101 telephone exp   500        1403            P 1000
40 400101 telephone exp    100       1404            P 2000
50 200100 cash in hand      600-
   This is My requirement is it possible in fbcj
    Please suggest me.ASAP.
Regards
   Naresh.

Hi,
This you can do it in two ways:
1. Make three header under top level....one Product A, 2nd Product B ( as Billing element) and third as Common expense ( only cost). Now 1st & 2 nd WBS, you have to have sales order linking with individual lint item, for third you will accumulate all the common expense till the period end then make a reposting of the same in desired proportion to both products WBS hierarchy
(This is if you want to have a track on the common expense as well.......like planning, budgeting & control)
After this reposting, run RA for individual billing element and hence you will all the complement detailing and control over Revenue and expense with respect to Product A and Product B individually.
2. If you don't want to maintain that kind of detailing the common expense and keep track of it through project, then have cost centers accordingly and make an assesment/ distribution with respect to expenses accumulated at those cost centers for the period to the respective WBS under each product. Then execute the period end processes for the project.
Or
You can try with have two more line items in the costing sheet as an overhead against common expenses with respect each product.
I hope this should help you.
Regards
Avisek Bhardwaj

Displaying Line Items of a BAPI in Table Format

have a custom Bapi ZPM_GET_ORDERS.
It has a Model structure like
Orders_Hdr
Operations [Multiple Line Items]
I want to display the operations line items in the table format in a View when we click on the Orders_Hdr.
For that I am wondering what should the code on the onLeadSelect of Orders_Hdr table at the ViewController?
In other words how can I display those line items on a click of a Header record. I am looking for some pseudo code that goes in the onActionLeadSelect()of View.
Thank You . Any help is appreciated

Hi Vivek,
On LeadSelect .....just get the current selected node element and also store a attribute value from the currnet selected to a variable (like orderid)which is common in both the node ....then loop through the operations node and put the condition equal to orderid using the variable ...if mathces the put node elemnt in to some node created(value node of same type )...
for copying the node u can use the WSCopyService class...
Regards,
Yash

Multiple invoice line items posted as single line item in FI

Dear Gurus,
My client has a specific requirement.
We are required to maintain a rebate condition at item level. In the invoice the values of rebate conditons are appearing as per the line item. This rebate condition has been maintained as statistical and accrual key has been assigend to it. Respective configuration has been done in VKOA. Accural check box has been activated for the rebate condition type.
Now when we are posting the invoice to FI, client requires that instead of line item wise posting of accrual amount it should post entire accrual amount in the single line item. In other words it is like posting of header amount directly, without any line item wise splitting.
Please help me ASAP.
Thanks in advance.
Regards
Piyush Ranpura

Dear Friends,
I am thankful for your replies. But probably I was not able to put the issue is the proper manner. Let us consider this example -
Mat. codes - M1, M2, M3 & M4   Rebate cond. - ABCD    Accrual key - ABC    GL - 12345678
In the invoice, rebate values are determined as follows for the each line item -
For Line item 10, Material M1
ZSHA   -   100
For Line item 20, Material M2
ZSHA   -   125
For Line item 30, Material M3
ZSHA   -   100
For Line item 40, Material M4
ZSHA   -   75
While the invoice is released for accounting follwing entries are there
xx 1 xx
xx 2 xx
xx 3      100 12345678
xx 4      125 12345678
xx 5      100 12345678
xx 6        75 12345678
xx 7 xx
xx 8 xx
But my requirement is
xx 1 xx
xx 2 xx
xx 3    400 12345678
xx 4 xx
xx 5 xx
How it could be done?
Thanks & Regards
Piyush Ranpura
Edited by: Piyush Ranpura on Sep 1, 2010 9:10 AM

Can we create multiple billing document from delivery with single line item

can we create multiple billing document from delivery with single line item

Hi
Please check the link
[can v create multiple billing document from delivery with single line item]
and as Lakshmi said, check the forum before posting an issue.
Regards
AA

How could i enter 100 materials in the single line item in the repair order

Hello SD Guru's
The below requirement is related repair process.Can you please suggest how i can go head.
I have a one requirement related to repair process in SAP SD. As of now the the repair order creating for only one material in the single line item. But the requirment is if they returned morethan 100 material from same customer, how to process that in systme prospective and standard SAP.
The standard SAP working based on single material for each line item so that the repair indicatior is triggered for that single material only. So how cound i enter multiple materials in the single line item and how could i create 100 materilals in the sigle line item and how could the repair indicatior triggered for that line item which is having 100 materials
Thanks in advnce
Thanks
KV

Hello Chakrapani,
Thankyou for your quick responce.
How it could be possible if it is possible in SAP.
Can you please suggest how can we achive in this scenario.
Thanks & Regards,
KV

Display single line item in 2 rows in table in Adobe form

Similar Messages

Maybe you are looking for