Display size 60gb video

hi guys,
i have a question about the display size of the 60gb video ipod. I just notice that there is a black outline around the actual display. I'm not talking about the screen size, but the actual picture that is being displayed. It does not completely cover the screen. so the actual display is smaller than the screen size. Is this normal? I have updated mine with the 1.2 firmware. I don't remember before the update. is it because of the update? thanx

thanks for the fast reply.
ok the black outline is very small. and it did this to all of the display, video, pictures, main menu, etc.
After looking at it again with display and nothing on (black screen) I think it's normal, because when its on blank screen i can see the outline of the actual display.
thanks

Similar Messages

  • Are 30gb and 60gb video same size?

    are the ipod 30gb video and 60gb video the same size?
    all i need is yes or no
    thank you,
    Ryan

    To answer your question, no. But they are very close.
    The 30 GB vesion is 2.4 x 4.1 x .43 inches and the 60 gb is 2.4 x 4.1 x .55 inches. Also, the 60 gb weighs 5.5 ounces as oppposed its 4.8 oz brother. Display size is exactly the same.

  • Can't restore iPod classic 60GB video.  Cannot Allocate Memory - Disk Utility

    Sorry if this has been asked before but I've been searching the boards and am yet to find a result.
    I have an old iPod classic 60GB (video) which has a dodgy HDD.  It was clicking and in a constant sad face/charging loop.  I've managed to get it display "Please restore iPod" message and it is now being recognised by my macbook.  I've tried to restore it via iTunes but when I try that I get an error message tht says "The iPod could not be restores because it is busy".
    I've tried toformat the iPod using Disk Utility too but i get an error:
    Disk Erase failed with the error:
    POSIX reports: The operation couldn’t be completed. Cannot allocate memory
    The oddest thing is that under disk utility my iPod drive is showing up as a 2TB drive:
    All I'm realy trying to do is restore the iPod so I can try to recover some of the tracks using Disk Drill.  Can anybody help?

    See if you can find a window based PC and try to do a Restore there.

  • My next iMac-- which graphics card; which display size?

    Hi all,
    I'd like some advice in choosing my next iMac, specifically regarding the graphics card and the display size.
    Graphics Card:
    I'm not a gamer nor am I doing any 3D animation. Is there any other reason to upgrade the graphics card? I DO want the best possible video playback (QT movies), but I don't know if the graphics card has any bearing on video playback quality.
    Display size:
    Aside from the obvious differences in resolution, do any of the three displays sizes (17,20,24) have any history of being better or more reliable?
    Thanks in advance for any tips

    Your needs will better dictate which model is best.
    Video playback of QuickTine movies will not be affected by upgrading to the 24" with the nVidia chip.
    No 3D gaming or animation means no need for a higher end graphics card. In my case, the x1600 ATi in the original Core Duo 20" is more than sufficient for everything I've thrown at it so far including full resolution "Call of Duty".
    For your use, you may not need the extra VRAM but I personally would bump it up to 256MB though. Adding an external monitor will split the total VRAM between the two monitors and with Apple continually moving a lot of Mac OS X's graphical features to the GPU, the extra memory may be a blessing.
    Display Size:
    I believe that reliability between the three models is pretty much the same.
    The advantage to the 24" is, of course, the extra screen real estate and resolution. However The price difference between the 20" and 24" could allow you to go with the 20" model and add an external LCD for a dual screen setup (if space permits).
    Weigh your needs - now and the immediate future - and then look at both models in person if possible.

  • How do you know the best iMac display size

    how do you know the best iMac display size
    Only on them fits in the screen window and that makes the font so tiny.  The others are too wide or too tall.  I usually view at 150 - 200% for vision issues.

    You say it's better to do the Media Browser?  I'm fairly new to movie, dvd and garage band.  How would I go about using the Media Browser instead of straight to iDVD?
    Select Your project - go up to Share - Share to Media Browser and as Large (Not HD)
    In iDVD select a nice theme - click on Media button - click on Movie - Select Your movie.
    NOW - Save as a DiskImage - and test this before burning DVDs - if this Plays OK then either burn the Image by using Disk Util tool (and set down burn-speed to x4) - or burn via iDVD (will take more time)
    I want to keep as much quality as I can.
    Then don't use iMovie'08 or 09 or 11 - as they all discard every second line resulting in less quality on the DVD. I use iMovie HD6 or FinalCut any version.
    Also...I tried to split my project in iMovie...but couldn't find a way.  I wound up just making a copy and then deleting out a handful of scenes from the copy...I still have the original at 4:12hrs.  Is there a way in iMovie to split a project? 
    I would make a copy and cut away a bit from the end - calling this Part 1 and from start of the other copy Part 2.
    OR - there are other programs that can squees in more to a DVD e.g. Roxio Toast™ - BUT this has two cons.
    • It costs - to me it was well spent mony as it can so much more e.g. back engineer a DVD to an editable form
    • Squeesing in more on a DVD - costs in QUALITY - and as You want as much as it can be - then 90 minuts portions encoded with Pro-Quality encoding and full quality interlasced material from a video-editor that delivers this is the way to get 100% of what DVDs can do.
    DVD is as standard only SD-Video - HD not possibly. Then You need Blu-Ray. (also Roxio Toast™)
    Yours Bengt W

  • Size of video in sidebar - can it be changed?

    Hello -
    Does the way the video is published or the dimensions of the video imported into the sidebar affect the display size? We are finding that the size of the square is too small and we would like to make it larger. Is there any way to affect the size of the video in the sidebar? I saw some posts saying it cannot be altered but I think I've seen it being different sizes in our published player but cannot get it back to the larger size I once saw. We just want it streched the entire width of the sidebar if possible.
    Thanks!
    Katherine

    @rbalinsky
    You are looking at the live video quality settings. When uploading a FLV video to a share pod, there is not resizing or modification to the video. Just keep in mind that the pod itself may not be the same size as your video. Just make the pod larger and your video should scale to fit the pod.
    Generally speaking, for best results I encode my FLV videos to
    FLV
    H.263
    720X480
    800 Kbps
    But you can go to higher quality settings if needed. It really all comes down to bandwidth required to deliver the media and screen real estate for the media to be played on.
    I would recomend that you don't screen share your video (the desktop is fine), as screen sharing runs at 3-5 FPS (generally speaking), and doesn't deliver audio, so you will get a bad video experience when using screen sharing.

  • In previous versions of Firefox I was able increase the display size on Flickr which remained unless I altered it again. Does any one know how to do this on Firefox 4?

    Question
    In previous versions of Firefox I was able increase the display size on Flickr which remained unless I altered it again. Does any one know how to do this on Firefox 4

    Make sure that you not run Firefox in (permanent) [[Private Browsing]] mode.
    * You enter Private Browsing mode if you select: Tools > Options > Privacy > History: Firefox will: "Never Remember History"
    * To see all History and Cookie settings, choose: Tools > Options > Privacy, choose the setting <b>Firefox will: Use custom settings for history</b>
    * Uncheck: [ ] "Permanent Private Browsing mode"
    You can use one of these extensions to adjust the default font size and page zoom on web pages:
    * Default FullZoom Level - https://addons.mozilla.org/firefox/addon/6965
    * NoSquint - https://addons.mozilla.org/firefox/addon/2592

  • Can't sync game with 60GB Video iPod

    This morning I purchased Phase for my iPod. (5thG 60GB Video) And I can not sync this game to my iPod. I get the error {The game "Phase" was not copied to the iPod "mcarrolls iPod" because you are not authorized to play it on this computer.} I normally don't sync my music, just manually add content to my iPod, But I checked Sync Games in my iPod tab and I get the error. Then I went as far as to snyc my entire library, deleting hours of ipod formatted video I encoded myself from my ipod, but still wasn't able to get the game to sync. I decided to try a restore, since my iPod was practically empty, still no luck. I purchased an album in iTunes and am able to both sync, and manually add that purchased album to my ipod. Now I have an empty iPod and still can't get my purchased game on to my iPod. Any help?

    Hey mcarroll, how did you get Phase to sync onto your iPod? The same problem occurred with me actually so i probably have to do the same as you did. So, in other words, how did you actually authorize DRM software to be eligible to be synced onto your iPod? Where did you go in settings/preferences that eventually granted you the ability to sync "Phase" onto your iPod? Thanks for letting me know!

  • I cannot play videos on 60GB Video without it halting and muting

    I have used several programs over the last few days to convert different videos to MP4 format, and while the videos play fine inside of iTunes, they mute after a couple of minutes on the IPOD itself. This has happened for 100% of my converted MP4 files. I even used a muxer/demuxer to run the MP4 files through before putting them on the IPOD.
    Basically, they'll play fine for perhaps 2 minutes, but then the sound will go, the video will halt... and although the video will start back up again in 10-15 seconds, the sound won't... at all. I can rewind or fast forward a bit and the sound will come back, but it'll mute again within a minute... every time. It doesn't matter what the converting program I've used... it happens to every one of them.
    Yes, I have tried converting before I used the Update tool and after. Same problem before and after. The thing that gets me is that all my video podcasts work fine. They work all the way through without error. However, converting or just finding an MP4 file from somewhere and putting it on... will not work. It will halt 100% of the time.
    My iTunes is up to date. My firmware is up to date. My Quicktime is up to date. Some help here would be nice to get. I hate to have spent all that money for a 60GB Video IPOD and basically be worthless for the main reason I got it.. play all my videos on. Thanks.

    Eric,
    The problem is most likely software version 1.1. You will want to go back to 1.0
    See this for instructions...
    http://discussions.apple.com/messageview.jspa?messageID=1813873
    btabz

  • When creating a new DPS should I use sizes offered by InDesign or the display size of the device?

    Hello all,
    When creating a new DPS, should I use the sizes offered by InDesign or the display size of the device?  I ran into this question when I was looking up the sizes of different devices and found that iPhone 5s, iPhone5c, and iPhone4s sizes differ than the defauly dimensions offered by InDesign. 
    Also, should I worry about the ppi resolution?  With iPhone, they all seem to be 326ppi but when dealing with other devices is this something that I should take into consideration?  Ideally, I could be creating DPS apps for all devices offered in the Digital Publishing drop down in InDesign (iPhone, iPad, Kindle Fire/Nook, and Android).
    Thank you for any help you can provide.
    By the way, if it helps I am using InDesign CC.

    Using 1024x768 and creating PDF articles will get you OK with both iPad resolutions, and, as Bob L. says, quite decent "one size fits all" result for all other devices.

  • HT204291 Using Azul media player app on my ipad  Apple tv will only display sound but not video from movies.  Any ideas on a fix.  I set mirroring to on but it still does not display video.  It will display photos and video recorded from my iphone.

    Using Azul media player app on my ipad  Apple tv will only display sound but not video from movies.  Any ideas on a fix.  I set mirroring to on but it still does not display video.  It will display photos and video recorded from my iphone.

    Here are the steps for AirPlay:
    Before starting Azul from your (running iOS 5.x/6.x) home screen where have have all your apps we need to turn on mirroring
    On your iPhone 4S/5 or iPad 2 or 3, double-click the Home  Button to view your recently-used apps.
    Swipe all the way to the right to until you see the  icon.
    Note: If the icon does not appear, go to the "If AirPlay Mirroring is not visible or available on your mobile iOS device" section.
    Tap the  icon to see the list of available AirPlay devices.
    Enable AirPlay Mirroring in this menu by tapping on an available Apple TV, then sliding the Mirroring slider to ON.
    Now you should be seeing your iPad/iPhone on your TV.
    Start up Azul now and using the settings icon on the top right corner go to the option that say "TV out" ON.
    When you do that you will see an Orange screen
    Now click "Done" and play the video you want to watch and it will AirPlay

  • Windows 8.1 forgets dpi / display size settings for one monitor on almost every reboot

    I use TV 32" with 1920x1080 and cintiq 13" with 1920x1080
    when I boot my PC the resolution is fine but DPI is wrong.
    In smaller monitor It's look like DPI is higher than the bigger one.
    I already set dpi to be the same (smallest 100%) but it's not work until I do something to change display setting.
    It's really annoy me. This problem is not happen when I use windows 8
    Only solution I found is turn off
    "Turn on fast start-up".
    When I do that It's boot like what I want. every monitor is the same DPI.
    But it'll make my boot time longer.
    It should be just start up windows and use the same dpi from the start.
    So I think this problem is a bug in windows 8.1
    Best regards

    Thank you for reply.
    I've already used the latest graphic card driver. But It's won't help this issue.
    In registry editor. I check those variables then value of them is already set like that blog suggest.
    So , it look like when windows start-up(with fast start-up) It use something like
    suggest value for different monitor size instead of what I set in control panel. But when I turn off fast start-up windows use my setting value.
    And I think there are a lot of people who got the same problem as me.
    Here is an example.
    http://answers.microsoft.com/en-us/windows/forum/windows8_1-desktop/windows-81-forgets-dpi-display-size-settings-for/385cb615-d699-47f8-8c12-717e3364c866

  • How to set the display size of the PDF - in percent?

    Hi, I wonder if anyone knows if it is possible to set
    the display size of the PDF document, so that it always
    shows in, let´s say 100%, in the viewers browser window?
    Much grateful for any help!
    /Anni

    In Acrobat, under Document Properties (Ctrl+D), you can edit the Initial
    View settings, including the zoom level.

  • How to set display size of a Region or Dynamic Region?

    Hi,experts,
    In jdev 11.1.2.3,
    I drag and drop a task-flow into a jsf page to create a Region,
    and set display size for the region, source code as:
    ===================
    <f:facet name="second">
    <af:decorativeBox theme="medium" id="db1">
    <f:facet name="center">
    <af:panelGroupLayout layout="scroll" id="pgl1"
    inlineStyle="width:1200px;height:700px;">
    <af:region value="#{bindings.trainflow11.regionModel}" id="r1"
    inlineStyle="width:1200px;height:700px;"/>
    </af:panelGroupLayout>
    </f:facet>
    </af:decorativeBox>
    </f:facet>
    =================
    But, the Region is only showed a small fraction area on the parent jsf page whenever during design or run time.
    How to set display size of a Region or Dynamic Region?
    Thanks!

    Hi,
    the decorative box is supposed to stretch components in the center facet, so at runtime the region should stretch. Can you try with a static region to see if this is an issue with dynamic regions?
    Frank

  • Latest flash version will not display images or video

    Latest flash version will not display images or video in 2 x Windows 7 Pro 64bit machines, 1 x Windows 7 Home Premiums, and 1 x XP SP3 under VMWare Workstation 7. Problem plagues Firefox, Chrome, and IE on all systems. Also running Norton Security from Comcast on all machines. Disabling does not appear to help. Suggestions?

    Not sure, this is the one that I really want to view. I am using the latest 11.6 ending in 168. Curious you got the images. The product ones act like they should be displaying for me but don’t. Can you do a capture of the images? The text with small images sometimes comes through and sometimes not. I wonder if there is a problem on the server end.
    When I talk to the Customer Service people they claim to have no reports of problems, but like the sports pro about to be traded, they may be the last ones to know…

Maybe you are looking for