Display Table on Several Pages

Hi Guru's,
I have created a form wich contains a table (for example Faglflext), this table is very big and cannot to be displayed on only one page. But my problem is when I do a print preview when I run the form, the table is not fully displayed, only the first page.
I tried to play with the properties of the subform pagination but I don't know which to use.
Have you any idea?
Thanks a lot,
Mohamed.

Try this...
1. Placed the TextField inside a subform and set its Content to Flowed from Object palette.
2. On the Field tab of the text field's Object property tab, check the Allow Multiple Lines checkbox
3. Now again for the text Field, click on the Layout tab, check the Expand To Fit checkbox under Y:/Height
Just check what is the form type and defaults in LiveCycle Designer by going to Form Properties. The preview type and preview adobe XML form needs to be Interactive and Dynamic XML form respectively.
Hopefully that solves your issue.
Regards.

Similar Messages

How do I break a large table over several pages?

I'm sure I used to be able to show a large table (more than one page long) over several pages. Now, when when the table grows to the bottom of the page the whole table is displayed on a new page. How do I get it to break so it shows partly on one page and partly on the next page?

Not sure how to add a comment to my own question...
I am working in Pages 5. I tried to break a table over more than one page in an existing document and just couldn't get it to work (still can't). I tried it in a new document and it worked, no problem. The only thing I can think of is that I had to export my original document to Word and then had to open it again in Pages. There must have been some corruption.
I'm happy again... only wish that I could live within the Mac world and not have to deal with the PC world. Sigh.

How do I make a one row table across several pages?

Hi,
I would like to create a one row two columns table, but to have this table with text flow on several pages.
But I don't know how to do this. If I enter many lines of text, the table will not go on next page, and the extra lines are lost somewhere in the void.
I can do this in NeoOffice though, and in MS Office too.
Thanks

Hello Julien,
yes, I believe I can help your brother with a solution. First set your document to a two column layout in the layout inspector in the "Layout" tab panel. It's good to see the layout guides and hidden signs for better layout creation, so make them visible (menus: "View/Show Layout" and "View/Show Invisibles". To have an appropriate distance between the the rows of text, set the number field "After" at the bottom of the same panel to a value so the distance is ca. 1,5 line spacing or whatever your brother like to have.
Now write the text you want to have in the left column. To place the translation in the right column, choose the menu item "Insert/Column Break". Now the text cursor jumps into the right column and you can write the translation. To type the new text in the left column, choose the menu item "Insert/Layout Break". The text cursor jumps from the end of the right text under the text in the left column, and you can go on.
I know that the use of the menu items is not good for the workflow, so do the following:
Open the Sytem Preferences and choose the panel "Keyboard & Mouse". There click the tab button "Keyboard Shortcuts". Press the "+" button at the bottom of the list field. In the appearing sheed select the Pages app in the pull-down menu "Application:". If you can't find it there, use the last menu item "Other..." to search for it. Now type the EXACT menu item title in the text field "Menu Title:". Here it is "Column Break". Than activate the field "Keyboard Shortcut" and press the key combo you want to have for this function like "optionshiftc" or whatever. Press the "Add" button and repeat this steps for the menu item "Layout Break".
Close the System Preferences and start Pages. Now you can use the key combos for the break insertions.
I hope whith this your brother gets the document he wants to have. But if there are more questions, feel free to post them here.

How to display table in jsp pages

hi all ,
i want to diaplay the table in jsp page...ie,if i click on some option then i need to get the table in jsp page
wiil u plz help me
thanks in advance
chintu

hi all..
i didnt ask how to design table in jsp...i am asking how to diaplay the table with data already stored in database...i just want to retrive the values in table and display in jsp.....
thanks in advance...
chintu

Table over several pages

Hello
I want make a static Table, a dynamic is not necessary.
The person who fill out the form, should be able to do this over more than one page.
But I don't know how to make the SAME table over one page?!
I have no data link in this table, it should only be filled.
Thanks.

Sorry but I do not understand what you are asking ...can you elaborate ...or provide some examples of what you are looking for?
Paul

Report 2D table spanning several pages

I've created a report (using a script) that creates two 2D tables. The number of entries in each table depends on user input (timespan and number of channels), so I don't know how many pages the report will span across.
Is there a way of automaitcally exapdning the report to the number of pages required?
If not, what would be the best approach for solving this issue?

Hi salte,
Here's an example of what Walter is talking about that uses 2D tables instead of 2D graphs.
Brad Turpin
DIAdem Product Support Engineer
National Instruments
Attachments:
Mfg Table Report.zip ‏41 KB

How to: Print table on first page, use second page (back) for text only

Hi, I am looking for a clear document on how to use pagination and the Odd and Even pages.
We need to print a table over several pages, but only on Odd pages.
On the back of each page we need to print "Terms and Conditions". Is that possible? Can it be done without scripting
We are on ADOBE version 8.1
In the file properties, double sided is switched on, and version set to 8.1 and higher.
I created two Master pages, a FrontPage with ContentArea1and a BackPage with ContentArea2.
FrontPage is used for uneven pages, BackPage is used for the even pages. The masterpages are printed correctly (alternating properly).
Two pages were created for the content area's:
ITEMS: contains item data (table with header and footer). Place is "On Odd Page". After "Goto page BackPage". And if the table needs to be paginated it goes to BackPage with overflow leader "Conditions".
CONDITIONS: contains a textfield (Terms and Conditions). Place is "On Even Page". After "Goto page FrontPage". No overflow.
What should happen is that on the front pages the item table is printed. If there are too many lines it should overflow to page number 3 then 5 etc. All the even pages should display the text.
What actually happens is that the item table also gets printed in the content area for the Condition text...
Also the "Conditions" are not printed on the last back page. But only once before it...
Cheers,
Edwin.

Fixed it... After a lot of creating, deleting, playing around with pagination and the inevitable cursing...
I have created 5 pages:
1. FirstPage
     - Odd/Even: Odd (Front) Pages
     - Placement: First page (In page set)
2. FrontPage (For Odd pages)
     - Odd/Even: Odd/Front Pages
     - Placement: Rest of Pages
3. BackPage (For Even pages)
     - Odd/Even: Even (Back) Pages
     - Placement: Rest of Pages
4. LastPage
     - Odd/Even: No Odd/Even Restrictions
     - Placement: Last page (In page set)
5. DummyPage
     - Odd/Even: Blank pages
The 'Terms and conditions' are located on the BackPage and LastPage (as a text).
The table that is printed is (of course) located on a normal page (flowed subform).
Pagination tab: Placement = Following previous, and After = "Continue filling parent". No overflow... Basically, it's all default.
The table lines will now start on the first page and if there are more lines than can be printed on this page, it will continue in the next content area. That will be on the FrontPage.
The trick is that each master page must have a content area (mandatory). Except for Blank pages, but these cannot be used... Blank pages would only be used once, after the first page.
What I discovered is that you can drag a content area away from the Master page and attach it to a different master page.
Logically, if there is no content area on a page, then data cannot be printed there. So, I created a Dummypage. On this page I dumped the content areas from the LastPage and the BackPage. As a result, content cannot be printed anymore on the back of pages. Only the standard text (a text field) is printed there. When the data from the table is overflowing, it will automatically overflow from the FirstPage to the next content area. Which is located on the FrontPages only.
The DummyPage is NOT used anywhere.
The result is that the records can only be printed on the content areas that exist on the First and Front pages. The back pages are now skipped.
Duplex printing is now working correctly, and the text is printed on the back of all the pages.
Cheers,
Edwin.

Header not getting displayed in the next page in the second table

Dear Experts ,
I have a query regarding Header not getting displayed in the next page in the second table of the main window. .Let me elobrate the issue.
I have a smartform in which there are 2 tables TABLE 1 and TABLE 2 in the smartform MAIN window. TABLE 1 is for pending PO and TABLE 2 is for future delivery date P O separated by text in between.
Now the header for both the tables and the data are getting displayed properly if the total output is in only one page. But If there are more entries in the TABLE 1 the Header for the TABLE 2 is not getting displayed. Header for TABLE 1 yet gets displayed properly in the next page in case of more entries.
Only issue is that Header for TABLE 2 is not getting displayed in second page but it gets displayed if the entries are less in TABLE 1 and the total output is in one page .
Please provide a elobrate solution on this problem as the requirement is urgent.
Thanks,
Regards,
Sachin Hada

Hi Sachin,
you need to cteate two pages FIRST and NEXT.
in first page --> FIRST
next --> NEXT
in next page
page---> NEXT
next ---> NEXT.
you copy the first page main window is the same in next page
aslo
I think help ful for you
thanks & Regards
BHUPAL.

How to display the query results in several pages?.

Hi,
i want to display the query results in several pages. for example my query result found 50 matches, now i want to print 20 per pages next 20 will be in next pages. iam using only jsp & mysql.
Regards
Chinna

Hi, what you are trying accomplish is known as pagination.
You could use JSTL tags with Custom Tags to perform pagination in your JSP pages.
evnafets showed me DisplayTags , you could use those as well http://displaytag.sourceforge.net/11/tut_externalSortAndPage.html
Here is one article on paging:
http://www.javaworld.com/javaworld/jw-07-2004/jw-0726-pagination.html

Changes to table header row that repeat in several pages

Hello.
I have a table that expands over several pages, with a header row that repeats in all of them.
I want to hide some of the header row's columns by code.
When I change the header row, it changes only for the first occurence of the header row, and not for other occurences.
I tried to do somthing like that:
for (i = 0; i < Table1.nodes.length; i++)
if (Table1.nodes.item(i).name == "HeaderRow")
// ..hide the column..
But it only entered the loop once, and only changed it for the first row.
I also tried to look at Table1.HeaderRow.instanceManager.count, but again, it has the value of 1, so I can't access
Table1.HeaderRow
or somthing like that.
So how can it be done?
Best regards,
Udi Dekel.
Edited by: Udi Dekel on Jul 30, 2008 9:24 AM

Hi Rahul,<o:p></o:p>
I have tried using multiple formats of images (.jpg & .png) for the problem and have been able to successfully achieve the desired result as per design.<o:p></o:p>
To further verify the issue that is happening on your system we need to do some extensive troubleshooting to isolate the issue. This would require you to open a ticket with Microsoft.<o:p></o:p>
Following is the link along with the number for Microsoft which would help you to open a ticket with us – <o:p></o:p>
http://support.microsoft.com/OAS<o:p></o:p>
1800 MICROSOFT
Thanks & Regards,
Vinayak Shetty

How can I re-display the header of table on next pages (report designer)

In the report designer, I insert a data provider. The fist line is the field name.
When I browse the report, the field name line can't display on the second page, only on the first page.
How can I do to display it on next pages?
Thanks
Eva

Look at the code of the MouseListener to see what method it invokes and then just invoke the method directly.
Or you can create a MouseEvent and use the Component,dispatchEvent(...) method.

Dynamic display of table on ADF page

I am looking for a ADF page which has a drop down box having table name as inputs and when selected it should show the data inside that table in the ADF table component.

Hi John,
Regarding your situation if you use different page fragment and then by using dymanic task flow decide which page fragment must be shown (each fragment has a table) in this case it is really performance effective because in the case of switcher or simpler (add 3-4 differenct table and just flag the rendered attribute of each table) your page must have all the iterator of the tables.
when your page render all the iterator must be proceed.
in the TAsk flow situation just the iterator of the fragment would be proceed.
so the most simple solution is drag all the table to the page and just flag the rendered attribute of each of them so only one of them render base on the choice list.
the best solution is to use the task flow.
Good Luck.

Nested Tables and Multiple Pages

Hi,
I have a problem with nested tables that span multiple pages.
Lets assume I want to create a list of orders. Each order contains several order items. As long as an order contains less order items than fit to one page the list is rendered correctly. But if an order contain more items all items that can´t be displayed at the first page are cut off.
I´ve tried so many combinations of subforms with flow content and position content, subform sets and "Allow Page Breaks within Content" as well as Layout Property "Expand to fit" but nothing helped.
Can someone tell me if and how I can achieve this. In the meantime I do work in Designer directly with a XML datasource. So I could send you the form and example data.
I´m working with NW04 SP11 and Adobe Designer 6.0
Best regards
Helmut

Hello Helmut,
There are some limitations and bugs in your requirement.
Please see the output after copying into notepad.
1.Eventhough if you give overflow leader , the headers for item table will not repeat.it is a bug.this is not solved in designer 7.1 also.
2.There are some accessibilty bugs in case of nested table.
Please follow the below design in the hierachy tab.
MainTable (subform)
 |---- Header (subform)
 | |- Header texts for Main table +
 | |- Text for nested table
 |---- DATA_main (subform)
 |-Main table fields
 |-ITEMDATA ( Table SUBFORM)
 |-Header (Subform)
 | |-ItemHeader texts
 |-DATA_item (subform)
 |-Item data fields
for DATA_main and DATA_item subforms, set repeat count MIN in binding tab.Set all flow content and allow page break with in the content.
The output will appear in the following manner.
( Copy the below text into the notepad. )
Order no. text customer
 Order items
=================================================================
1 Computer Mr. Smith
 Order item no. short text quantity price
 10 PC Tower 1 400.00
 20 LCD Display 1 200.00
 30 Keyboard 1 15.00
 40 Mouse 1 10.00
2 Notebook Mrs. Parker
 Order item no. short text quantity price
 10 HP Notebook 1 600.00
 20 Ext. hard drive 1 80.00
let me know if u didnt get the solution.
Thanks and Regards,
Pavan Meda

Orphan table header at bottom of page when page breaks a table across multiple pages

Hi all,
I think similar questions have been asked before but I have not found an answer.
Here's the scenario:
I have several dynamic tables in a dynamic form. The layout is flowed, and everything can grow and shrink as needed. That all works.
However, my tables have headers. Occasionally when one of these tables is large and needs to break across multiple pages, there will be just enough room at the bottom of the previous page to show the next table header, but not enough space to show any of the related table rows. So it ends up looking silly, with just an orphaned header at the bottom of one page, and then the table continues on the next.
I have my tables set up so that headers get repeated on subsequent pages, by setting the header row to "repeat row for each data item" on the binding tab. I would like to keep that functionality, but I just want to find a way to avoid these "orphaned" table headers that sometimes appear.
I have tried the "keep with next" option. However, although this does push the rendering of the header to the next page, it seems that according to livecycle the table still officially began on the previous page. Therefore I get a duplicate header because of the "repeat row for each data item" option.
I have also tried having two header rows, one that is set to only be displayed on the initial page, and the other that is set to appear only on subsequent pages (pagination tab). This did not work - I ended up with duplicate table headers.
Can anyone help me?
Thanks!

You shouldn't have "repeat row for each data item" selected for header rows.
You should have "include header row in initial page" and "include header row in subsequent pages" selected on the Pagination tab.
Then using a "keep with next" might work ok.

How can tables across multiple pages be printed?

I've got DIAdem 9.0. I have a table on a report that has so much data it spans several pages. I can scroll through the tables with in DIAdem REPORT but I can only print one page at a time. Does anyone know how to print all the pages from script? Is there a way to print the page number like "Page 3 of 10". Thanks!

Hi DIAdemon,
Before issuing the PicPrint() command, you can set a couple of DIAdem variables in order to control what prints:
To print all sheets:
PrintRangeType = "AllPages"
Call PicPrint("WinPrint")
To print some sheets (for instance only sheets 2 to 4):
PrintRangeType = "PageEnums"
PrintFromPage = 2
PrintToPage = 4
Call PicPrint("WinPrint")
Also, you can insert text on each DIAdem-REPORT sheet that uses DIAdem variables to dynamically display page number information on each sheet:
Page @GraphSheetCurrNo@ of @GraphSheetCount@
This will display the "Page 3 of 10" syntax that you wanted. Note that if you insert a new DIAdem-REPORT sheet, you will have to click View >> Refresh to get the page number information updated
on all sheets.
David Mc.
NI Applications Engineer

Display Table on Several Pages

Similar Messages

Maybe you are looking for