Display Text Area and Text field in same line

All,
Please help with this scenario.
I have 3-4 text fields, which are all on NEW LINE. I want a text area adjacent to these 4 fields.
How to achieve this.
Thanks and Regards,

Hi,
OK - My Textarea item is immediately after the first normal Text item in sequence numbers (the first item is sequence 10 on my page and my textarea item is sequence 15).
The only settings I changed on my TextArea item are:
Begin on new line: No
HTML Table Cell Attributes (Element section): rowspan=4
This second setting merges together 4 table cells in one column into a single cell
Andy

Similar Messages

How can I change a PDF document to have an enlarged text area and smaller margins?

I've just been reading a long discussion initiated by a guy who wanted to recompose a PDF file to print in fewer pages. I'm not asking about that. I'm aware that Acrobat Pro 9 will not recompose the pages of a pdf for you; as someone said, it's not a word processing program. I want to copy a PDF to a new file with an enlarged text area and smaller margins, so I can read it more easily. My eyesight isn't so great.
I'm trying to print a decision of the US Supreme Court, for my study. The problem is that these PDF files of such decisions are composed in 10-point type with generous margins, in folio-size pages smaller than 8 1/2 x 11". When you open PDF files of these decisions, you get extremely wide margins and relatively small type. Essentially, I'd like to re-rasterize the document so it prints on my 8 1/2 x 11" paper in a larger apparent type size, but in the same high resolution as the original. By the way, the decision I'm working on is almost 200 pages long, so I don't want to do this, obviously, in a page by page manner.
I guess I could do this in Photoshop, by blowing pages up and cropping them. Photoshop does a good job of eliminating the jaggies when you do this. But it would seem better to re-rasterize the pages from the PDF source file. So would any reader be kind enough to explain this process to me? (I'm fairly savvy in Photoshop, Illustrator, and computer printer concepts, but a complete newb in Acrobat.)

If you just want this for printing, one thing you can easily do is crop all of the pages to remove the margins. For example, you can rop 2" off the left and right sides, and 1.5" off the top and bottom. Then print using a Page Scaling of "Fit to Printable Area".
To crop in Acrobat 9, select: Document > Crop Pages
be sure to select All for the Page Range.

Reg: problem in displaying as key and text

Hi Friends,
I have a problem while displaying values for 0profit_ctr.
In Development box report working fine. In production it giving problem.
ISSUE:
I want to display the 0Profit_ctr as key and text format. In development box it showing correct. I cross verified the properties of 0proft_ctr charcaterstic in report of development and production box. In both it is defined as dispaly key and text.
Also cross verified the infoobject (0Profit_ctr) details, In both Business Explorer general settings defined as Display as Key and Text.
Everything is same in production and development box for this. Even though in production it showing as text and key. we need to display it as key and text.
any suggestion on this.
Regards
Mrk.

It could be that the infoObject has been disturbed, have you tried just re-activating the object in Production.
Also check the following link :
I am able to search only by text and not by Key in filter.

When I type I cannot add text when I select the text area and double click. Why?

When I type I cannot add text when I select the text area and double click. Why?

Premiere Elements 11 trial version for macMac computer photos uploaded to the timeline just finetrying to make a new title, streaming or in a framedouble clicked on the text in the box and nothing shows up when I type on my keyboard. I can delete the words that are there but not type in new ones. I selected the type and size, etc.
Thanks if you can figure it out. I gave up!
I may just un-install it all together if I can't get to work.Joanne
Date: Thu, 9 May 2013 17:59:08 -0700
From: [email protected]
To: [email protected]
Subject: When I type I cannot add text when I select the text area and double click. Why?
    Re: When I type I cannot add text when I select the text area and double click. Why?
    created by A.T. Romano in Premiere Elements - View the full discussion
Joanne Murray J2 What version of Premiere Elements are you using and on what operating system (including 32 or 64 bit) is your Premiere Elements installed? Forgive the questions if you have been there and done that, but I do not want to take anything for granted that might hinder a speedy resolution to your issue. Are you opening an already created title that is sitting on the Timeline in order to edit it in the Titler or are you trying to create a new Title (Default Text or other)? Do you know how to work with the Selection Tool and Type Tool in the Titler? Once I know what version of Premiere Elements that you are using, I will give you specific how to details. Thanks. ATR
     Please note that the Adobe Forums do not accept email attachments. If you want to embed a screen image in your message please visit the thread in the forum to embed the image at http://forums.adobe.com/message/5307494#5307494
     Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: http://forums.adobe.com/message/5307494#5307494
     To unsubscribe from this thread, please visit the message page at http://forums.adobe.com/message/5307494#5307494. In the Actions box on the right, click the Stop Email Notifications link.
     Start a new discussion in Premiere Elements by email or at Adobe Community
For more information about maintaining your forum email notifications please go to http://forums.adobe.com/message/2936746#2936746.

Make text areas and textfields streach as window resizes

im using the border layout for most of my panels. how do i make text areas and textfields stretch as the window resizes?

Components placed in BorderLayout.CENTER will resize as the window resizes.
You will likely need to have nested JPanels, with different layouts, to create the ultimate layout of all your components in a frame, especially for non-trivial applications.
If you need specific help with layouts, you'll have to post an SSCCE.

How to get text name text object and text id for long text

Hi,
I am trying to fetch Long text for a given order number from transaction CO04 in SAPScript. I know that I have to use Include X (OBJECT) XX ID XXX.
How do I get the text name, text object and text id for the order header long text from Transaction CO04.
Points will be awarded..
Tushar

Tushar,
When you are in CO02, and are at the Long Text Tab,click on the Icon that is next to the Order Number at the top of the screen (this icon looks like a Pencil and a Pad of Paper and is called "Change Long Text"). When you click on this it will take you to the SAPscript Editor. Now hit Goto->Header and you will get the data you require.
Hope this helps.
Cheers,
Pat.
PS. Kindly award Reward Points as appropriate.

Transporting Text Elements and Text Symbols?

Hi,
Please tell me how do we translate text symbols and text elemnts into different languages? Also how do we transport them and if we translate them in different languages then will these translations be available when we are transporting them to different servers?
Looking forward to your quick response.
Regards,
MD

Hi,
Refer the below thread..
Re: Text element translation
Re: Text element transporting
Edited by: Chithra Saravanan on Aug 4, 2008 11:33 PM

Functional Area and Grant Fields on work Order

Hi Experts,
I want to know, how would I hide / set optional Functional area and Grant fields?
There fields are appeared on IW31 (Header data tab -> GOTO -> Assignments -> Funds Management)
Best Regards,

Hi,
I am going to perform FI Vs PM integration, In our case if funds are available then I can be planned and execute maintenance order, We have very experience resource in FI and that consultant advised me to set off these fields.
What is GuiXT? from where I can use this? how I will use this?
Regards,

Measure area and perimeter at the same time

I tried to measure area and perimeter at the same time but couldnt find a way to do that. I need to cover an area and to see area and perimeter at the same time and drawing two seperate measure lines -one for area the other for perimeter, is gonna be quite time consuming for me. Is there a way to see area and perimeter at one shot? I am using Adobe Acrobat XI Professional.
thx for your help

Please check the doc: http://help.adobe.com/en_US/acrobat/X/pro/using/WS8244FB06-C3F6-40cd-9D95-261B9DAF0070.htm l#WSC59DB518-BBCA-4d96-8606-7FC19DDC0D38
Regards,
Rave

Text area and UIScrollbar - CS3/AS2

I have a problem with the UIScrollbar component not being
visible when the movie is generated in CS3/AS2.
Following the method shown in
this
TechNote, the scrollbar displays correctly when the text area
is the only frame in a movie.
In the real movie I'm working on, however, the text area is
in a library item. In that item's definition, I've dragged the
scrollbar onto the area and the component's targetinstancename
parameter shows the correct name of the text area. But while the
text area displays when I preview the movie, the scrollbar is
invisible. Making it more puzzling, if I guess where it is, I can
drag it.
Any thoughts?
John

I tried this but the text looks warped and much different than it should. Seems anyway I embed it in the properties panel looks this way.. any other options??

Text area and Word Wrapping

I am creating a email form and am having problems with word
wraping in the text area. You can view the page and the output if
you put your email address in the form. The problem is the text
areas word wrap when inputting your information but all formatting
is lost in the email. Even if I add spacing for paragraphs. All
data is just a big run on sentence.
Here is the
Page.
I am using Dreamweaver * and php.
Thanks

Someone may have tried this because I received this output in
an email. You can see the formattint is lost.
Gear Ad:
Description:
This is a test. Line 1 Line 2 Line 3 Line 4 -
Test...test...test...test...test...test...test...test...test...test...test...test...test. ..test...test...test...test...test...test...test...test...test...test...test...test...test ...done!
Price:
test
Contact:
This is a test.

Mail reverses display of "from" and "recipient" fields

Mail 7.1 is reversing the display of the from and recipient fields on the message list window on my Exchange 2010 Account. So all messages appear to be coming from my address. In the case of multiple recipients, the multiple recipients are listed as senders.
The actual message window lists them correctly though. This does not happen immediately when launching Mail. I can launch it, and things appear correctly for around 20 seconds prior to reversing the fields.
I have duplicated this behavior on a MacBook Pro and iMac, both running 10.9.1. This problem does not occur on iOS devices, or other OSX applications, but only on my Exchange 2010 account on 10.9.1.
Thanks.

IMO, if you want to send magazines, then e-mail isn't the vehicle. Better to create PDF files and send them as attachments. This problem you're running into has to do with poorly followed standards in all those e-mail clients and attempting to send magazines as messages. Stick to plain text and there aren't any issues. Just my

Getting text ID and Text object associated with item texts in PO...

Hi,
To print standard text on smartform for a given item in purchase order, I need to find the text ID and object associated with it.
There are various texts like item text, Info record PO text, Material PO Text, Delievry Text, etc...
Now when I go to ME22N, and select item detail for any item -> Texts , how do I get text ID, and object associated with it ?

Hi ,
    Use table stxh,stxl
    FM read_text.
    you can view the text id by following
    this link
     me23->header-text-double click on text->menu goto->
     header
Regards
Amole

How to change default text properties and text box properties

I'm adding text to a PDF document by using the text box tool. The default is to put a border around the box and also the font is red and larger than I'd like. I think I found how to change the default box properties (so it has no boarder).
For the text/font, I can pull up a menu to change the font properties, but so far I'm having to do this for each box I create. One workaround is to cut and paste new text boxes with the formatting I want, but I still want to know how can I set the defaults to the font, size and color of text I want?
I'm using AA 8 Professional
Best, David

This is one of Acrobat's less intuitive areas!
For defaults, right-click on the text box that is as you want it: then select menu item 'Make current properties default'
Use Ctrl-E to bring up the Properties toolbar: its content will change depending on whether you have the box or the text selected, and selecting the box or text can be a bit clunky.
Steve.

Annoying text shadows and text backgrounds...

I agree with Chiatanya... the text shadows are very annoying! So too are the text backgrounds. I updated from 10.2.4 and didn't have either of those problems. Does anyone know of a way to eliminate the text background and/or text shadow? Transparent color???
Please view a screenshot of what I'm (we're) talking about...
http://www.macaspen.com/text_shadow.gif

Hi Richard, when any file or folder on the destop is selected it exhibits the "text background" you are showing and when it not selected the text has a drop shadow. There may be some haxie out there that will change it for you but I know of no way to accomplish that from within the system.
-mj
[email protected]

Display Text Area and Text field in same line

Similar Messages

Maybe you are looking for