Display the current mute setting in the system tray!

display the current mute setting in the system tray! I hope the developers will fix this issue. THis is only available in jailbroken iphones now,
I know i could use the switch on the side, but most of the time I'm looking on the screen on my iPhone not on the side. The problem is, that a miss incoming calls

Right, but the original question was not, "do you think a mute status indicator on the screen would be useful". The question was whether there would be some way to implement one.
In any case, what you seem to be overlooking is that there would be a lot of people who MIGHT need to be reminded of the mute status, PASSIVELY. Its a different cognitive operation, where the device takes the lead and reminds ME of its status, on-screen, (just as I look at it for other status indications, such as new email in inbox).. without me having to remember to think of the mute status question unprompted. I find it totally illogical that Apple left this out. It could be in the bar at the top with the other status indicators SO EASILY.
Message was edited by: Warner62

Similar Messages

How to determine the current update level of the system

How can we determine the current update level of the system. uname -a shows the release but how to obtain the update level through a program?
I have this sample program to display the version
#include <iostream>
#include <sys/utsname.h>
#include <dirent.h>
using namespace std;
int main()
struct utsname osinfo;
// Call uname to get system info, then extract strings.
uname(&osinfo);
if (osinfo.machine) {
    cout<<" Machine : "<< osinfo.machine;
if (osinfo.sysname) {
    cout << "\nOS Name : " << osinfo.sysname;
if (osinfo.release[0] != '\0') {
    cout<<"\nRelease : " << osinfo.release;
}My aim is to check if the Solaris box is 5.10 update 4 or not.
Edited by: nidhish9 on Nov 27, 2007 5:11 AM

nidhish9 wrote:
How can we determine the current update level of the system. uname -a shows the release but how to obtain the update level through a program?
I have this sample program to display the version
#include <iostream>
#include <sys/utsname.h>
#include <dirent.h>
using namespace std;
int main()
struct utsname osinfo;
// Call uname to get system info, then extract strings.
uname(&osinfo);
if (osinfo.machine) {
cout<<" Machine : "<< osinfo.machine;
if (osinfo.sysname) {
cout << "\nOS Name : " << osinfo.sysname;
if (osinfo.release[0] != '\0') {
cout<<"\nRelease : " << osinfo.release;
}My aim is to check if the Solaris box is 5.10 update 4 or not.
Edited by: nidhish9 on Nov 27, 2007 5:11 AMIt's in /etc/release...
essapd020-u004$ cat /etc/release
                       Solaris 10 8/07 s10s_u4wos_12b SPARC
           Copyright 2007 Sun Microsystems, Inc. All Rights Reserved.
                        Use is subject to license terms.
                            Assembled 16 August 2007
essapd020-u004$ It can be processed with some simple commands:
essapd020-u004$ cat /etc/release | head -1
                       Solaris 10 8/07 s10s_u4wos_12b SPARC
essapd020-u004$ cat /etc/release | head -1 | cut -f2 -d_ | cut -c1,2
u4
essapd020-u004$ Best,

Display the Current Running Files in the Label Control

I have a label control in Windows Form Application, and i have the application to display the building and progress of the projects in the label control using C# code. Along with the update of the label, the progress bar should also show progress simultaneously,
according to the building of the project. How should i do this ??
Thanks.
Tanmay

Hello All;
I want to know how can i display the current running project in the label control along side the same, i want to display the progress of the files that are build successfully through a progress bar.
What i need to do is when i click the button named as "Build" in the GUI it will display the selected projects to build from the CheckedListbox into the label control placed in the GUI.
Please, provide me some hint regarding the same.
Thanks.
Tanmay
Hello,
It depends on what your application is and how you build these files, if possible you could share them with us.
The most common way to display the progress, is to set the text for that label before or after we execute the line building these files.
You could place the lines setting the text or change the progressbar.value before or after the building lines.
Here is a simple sample using progressbar with a backgroundworker.
http://stackoverflow.com/questions/12126889/how-to-use-winforms-progress-bar
Regards,
Carl
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

Need to connect to upgraded Oracle EBS R12 version from R11. The current ODI set up is pointing to R11, Can i use the same connection to point to R12? Please hele experts..

Need to connect to upgraded Oracle EBS R12 version from R11. The current ODI set up is pointing to R11, Can i use the same connection to point to R12? Please hele experts...
Rp

1. in physical connections part can i use the same work schema
2. Can i use same contexts created or do i need to create everything as new and then try?
Thanks,
Rp.
Hi,
As you mentioned that you just upgraded the database, so the data is same and schema is same you can connect with the same work schema.
Yes, you can use the same contexts , but need to do Reverse Engineering for your new database.
And about data server, i think you also have no need to create new data server, if hostname,sid and port etc are same as these were with R11(consult with your DBAs regarding it)

WIndows 8.1 printer error: windows cannot print due to a problem with the current printer set up

My HP OFFICEJET 8500 PRO was working just fine wirelessly until I installed the Windows 8.1 update from the Microsoft. Now I cannot print at all. I get an error that says, "windows cannot print due to a problem with the current printer set up". I have tried reinstalling and a ton of other solutions to no avail. Can someone PLEASE Help!

Hello there, @jesseangelique ,
Welcome to the Community!
I would love to help you with the printing issue you're having, since the Windows 8.1 that was done.
Please run the Print and Scan Doctor. Write me back with the results or post a screen shot of the results and I will have a look at them.
This diagnostic tool will check for any conflicts that could be causing the issue. The tool will show you a report at the end. If there was a problem that the tool could not fix, you will notice it in the results.
Also, let me know which Officejet 8500 Model you have:
HP Officejet Pro 8500 All-in-One Printer - A909a
HP Officejet Pro 8500 All-in-One Printer - A909b
HP Officejet Pro 8500 Premier All-in-One Printer - A909n
HP Officejet Pro 8500 Wireless All-in-One Printer - A909g
Hope to hear from you!
R a i n b o w 7000I work on behalf of HP
Click the “Kudos Thumbs Up" at the bottom of this post to say
“Thanks” for helping!
Click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution!

Applescript to get the current insertion point of the cursor

How do I use Applescript to get the current insertion point of the cursor in a Apple pages.app document?

Oops, missed that one - you are correct, the line should be:
<pre title="this text can be pasted into the Script Editor" style="font-family: Monaco, 'Courier New', Courier, monospace; font-size: 10px; padding: 5px; width: 720px; color: #000000; background-color: #E0E0E0; overflow: auto">set {TheStart, TheEnd} to character range of the selection</pre>
I have a wrapper script that I use to insert stuff from my handler/code library into a Script Editor document, and was adapting snippets from that for my examples - I guess that one got away.
As for the dictionary, some applications just have poorly written or outdated documentation. Some of the items have multiple entries (eg, there may be a selection object for the application and also for the document), and some inherit properties from other items. Some are used as nouns, others as verbs (or both). Sometimes it is easier to visualize the item by keeping track of it's reference - the 'some property of document 1 of the current application' thing. You can use the Script Editor's Event Log to see the results of various properties and commands - for example, the above script will result in the following entry (your numbers will vary depending on the selected text):
<pre title="this text can be pasted into the Script Editor" style="font-family: Monaco, 'Courier New', Courier, monospace; font-size: 10px; padding: 5px; width: 720px; color: #000000; background-color: #E0E0E0; overflow: auto">tell current application
get character range of selection
{50, 50}
end tell
</pre>
You can also use the 'log' statement (eg, 'log MyVariable') to add your own entries into the log instead of using dialog boxes.

Is there any API to obtain the current Folder ID where the user is located??

how can obtain the current folder id where the user is?
tks in advance

Folder Id is one of the attributes you can pass to a custom item
type procedure. In the custom item type, go to the Procedures
tab. At the bottom of the page, under "Pass Attributes as
Parameters" select Folder Id from the list. Under "Pass As" you
have to provide the name of the parameter in your custom
procedure.
For example, here is a procedure that displays a list of
subfolders for a given folder:
<pre>
create or replace procedure SCOTT.DISPLAY_SUBFOLDERS AS
p_folderid IN VARCHAR2,
p_siteid IN VARCHAR2)
as
begin
for c in
(select '<a href="PORTAL30.wwv_main.main?p_cornerid=' || f.id
|| '&p_siteid=' || f.caid || ">'
|| f.display_name || '</a>' theURL
from portal30.wwsbr_all_folders f, portal30.wwv_user_corners c
where c.id = f.id
and c.parentid = p_folderid
and f.caid = p_siteid ) loop
htp.p(c.theURL || '<br>');
end loop;
exception
when others then
null;
end;
</pre>
This procedure takes both the folder id and the site id as
parameters.
Regards,
Jerry

I can record and hear me recording through the computer's built in mic, but can't get the external mic and headphones to work., The preferences are set for the external mic and headphones...

I can record and hear me recording through the computer's built in mic, but can't get the external mic and headphones to work., The preferences are set for the external mic and headphones...

What operating system are you using? Is it on a Mac or a PC? Which preferences are set for external mic/headphones, Audition's or the computers?

Powermanager 1.60 has removed the abilty to show the current power consumption in the tray.

Hi,
well the topic says it. Powermanager 1.60 has removed the abilty to show the current power consumption in the tray.
I realy frustrated right now, why the heck did they remove this nice feature?
And this new energy slider is just trash. If i change back to advanced mode, i cant see my current power consumption. Nor in the main battery tab. The field "Current Power" is just blank. And the option in the tray vanished.
What the **bleep** are these guys doing. There was a time i fought this powermanger is the best software ibm/lenovo ever produced, but since the change of the ui, and removing important features. Its unbeliveable.
Especialy if you are on windows xp, this looks like **bleep**, and this "new" gauge desgin, flickers and stops my mouse on hower over the new "Design".
a frustrated,
R61 user.

you should try uninstalling & re install it http://www-307.ibm.com/pc/support/site.wss/document.do?lndocid=MIGR-70602
Message Edited by GMAC-R60 on 08-08-2009 12:38 PM
Thinkpad R61 7733-1GU
Thinkpad X61T 7762-54U
Thinkpad X60T 6363-4GU
Did a member help you today? Thank them with a Kudo!
If a post answers your question, please mark it as an "Accepted Solution"!
Regards,
GMAC

I just restored my phone, however I have to sign into icloud and the phone is set to the previous owner's email and password. I am unable to get in contact with them. What can I do?

I just restored my phone, however I have to sign into icloud and the phone is set to the previous owner's email and password. I am unable to get in contact with them. What can I do?
Please help!

Hello codyfromseminole,
After reviewing your post, I believe your device is under Activaltion Lock. The following article will provide you with more information about the feature:
iCloud: Activation Lock
With iOS 7 or later, Find My iPhone includes a feature called Activation Lock, which is turned on automatically when you set up Find My iPhone. Activation Lock makes it harder for anyone to use or sell your iPhone, iPad, or iPod touch if it’s ever lost or stolen.
With Activation Lock, your Apple ID and password are required before anyone can:
Turn off Find My iPhone on your device
Sign out of iCloud on your device
Erase and reactivate your device
Important: Make sure to remember your Apple ID and password, and that your password is unique and secure—someone else shouldn’t be able to guess it. For more information, see the Apple Support article Security and your Apple ID.
If you want to give away or sell your device, be sure to erase your content and settings (in Settings > General > Reset > Erase All Content and Settings). When you erase your content, Find My iPhone and Activation Lock are also turned off.
If you no longer have the device, follow the instructions to remove a device you no longer have. For more information, see the Apple Support article What to do before selling or giving away your iPhone, iPad, or iPod touch.
For more information about Activation Lock, see the Apple Support article Find My iPhone Activation Lock in iOS 7.
Thank you for contributing to Apple Support Communities.
Cheers,
BobbyD

How do you change the time on the all day setting in the iCal on an iPhone?

I updated to ios 7 and when I want to put an all day event in. When I set it for an alert, it will only allow it to go off at 9:00 am. How do I change the time of 9:00?

rlh264 wrote:
When I set [an all day event] for an alert, it will only allow it to go off at 9:00 am.
That is not exactly true. The default time for the alert is set to the day of the event at 9:00 AM.
So, there are two points to be made:
1. You can change the default time of the alert for an all day event at Settings > Mail, Contacts, Calendars > Default Alert Times > All Day Events. But those choices are limited, and all occur at 9AM (on some day).
2. You can make the event almost (but not quite) an all day event (for example, a 23 hour long event), and then you could edit the event to have much more flexibility about exactly when the alert occurs.

Should i get the current MacBook Pro or the new design MacBook pro 2012?

Dear all,
GImme some opinions which to choose? Should i wait for the supposedly new design MacBook Pro? or get the current models that hae pretty good specs? I'm doing college at the moment and my current laptop is 4yrs old in need of a new one and hopefully get the 17" MBP coz the specs seem amazing. I'm doing graphics and multimedia so i would need a laptop that can handle all those stuff and be fast. So gimme some ideas what you think abt the current MBP and the soon to come new models? which is something pretty doubtful.

Hold off the buying. The current unibody macs are the last of the generation. A geenration that's in it's 4th year.
You might want to consider upgrading your current hard drive only to an SSD if your mac supports it. You can then move this over to your new mac. That's what I have done, and the speed difference of an SSD makes it feel like a new machine.
I would also suggest you buy a 15" and not a 17" save your money. The 17 is loking carrying a surfboard around.
<Edited by Host>

HT1841 How to disable some of the automatic function from my bluetooth (jabra) while iphone does not have the capacity to set up the bluetooth property like BB?

How to disable some of the automatic function from my bluetooth (jabra) while iphone does not have the capacity to set up the bluetooth property like BB?

Sorry. You're not making sense. Please re-phrase the question or post in your native language.

Loading the different result sets in the same sequence for the target table

Dear all,
I have 5 tables say A,B,C,D as my source and i made 3 joins P,Q,R .the result sets of these 3 joins are loading into a target table X but with 3 different targets with same table name.
I created one sequence say Y as my target table has primary key and mapped to three different targets for the same target table which i need to load.
But after deployed and executed successfully ,i am able to load the data from three join result sets with differeent sequence numbers.
I am looking to load data like this.
If First Result set P has 10 Records,SEcond Result Set Q Has 20 and the third result set has 30 records then while loading data into first target it creates the seq for the 10 records from 1..10 and while loading the data for second result set ,it creates the sequence from 11 ...20 and while loading the third target with the third result set it creates the sequence from 21 ----30.
But i am looking to load the three result sets in the sequence 1to 10 but not like creating fresh sequence for each result set.
how can we achieve this in owb?
any solution for this will be appreciated.
thank you
kumar

My design is like following
SRC1
---->Join1--------------------------->Target1( Table X)<-----Seq1
SRC2
SRC3
----> Join2----------->Target2(Table X)<----Seq1
SRC4
-----> Join3 -------> Target3(Table X)<-----Seq1
SRC5
Here the three 3 targets are for the same Table X as well sequence is same i.e seq1
If the First Join has 10 rows ,Seq1 generates sequence in 1 to 10 while loading target1
But while loading second target,Same Seq1 is generating new sequence from 11 but i am looking to load target2 and target 3 starting from sequence 1 but not from 11 or so.
As per your comments :
you want to load 3 sources to one target with same sequence numbers?
yes
Are you doing match from the other two sources on first source by id provided by sequence (since this is the primary key of the table)?
No
can you please tell me how to approach for this?
Thank You
Kumar

My iTunes library is too large for my iPod classic--can I create a separate library so that I can split the current library and sync the distinct libraries onto separate iPods?

My iTunes library is too large for my iPod classic--can I create a separate library so that I can split the current library and sync the distinct libraries onto separate iPods?

- If the Gmail accounts are IMAP one then if the library is erased and then you use the account old email will be redownload
- Easing the library on the MacBook does not effect what is on the iMac. On the other hand if you deleted the messages in the Mail app on the MacBook then they will deleted from all devices.
-See the middle of the following. It would seem to help in your situation
http://www.howtogeek.com/209517/how-to-stop-your-macs-mail-app-from-wasting-giga bytes-of-space/

Display the current mute setting in the system tray!

Similar Messages

Maybe you are looking for