Display the main screen

Hi,
I'm new in ABAP Community. How do you display the main screen after execution without to pass by screen result?
Thanks.

HI
WRITE :
/ 'Welcome to SDN'.
LEAVE PROGRAM.
you execute the above piece of code once with out writing LEAVE PROGRAM. and again execute the program with LEAVE PROGRAM.
you can find the difference.
Regards
Pavan

Similar Messages

Opening a new file in photoshopcc and the file name is displayed but no white working canvas. you can see it as a layer in the layers panel and if i draw on the grey area i can see int on the layer but not on the main screen.

opening a new file in photoshop cc and the file name is displayed but no white working canvas. you can see it as a layer in the layers panel and if i draw on the grey area i can see int on the layer but not on the main screen.

Graphics card is the problem.
Trying to update drivers now.
Thanks for your help
john

How do I limit what movies are displayed at the top on the main screen

Is there any way to limit what movies are displayed at the top on the main screen when menu Computers are selected?
Currently it shows ALL of the content in the Movies folder in iTunes, but I would like to not show my 1 million 5-second videoclips and only the "real" movies.
Any suggestions?
Thanks in advance
Bjoern Dirchsen

I think you are right. It's the latest videos added that are displayed first. Makes sense.
I'm using a PC so it's a bit hard to work with iPhoto . However, your comment did give me a hint to how to solve the problem.
I moved all my video-clips out of my Movies folder and into my Pictures folder.
Then I changed Photo Sharing in Itunes to include Videos
And voila! The main screen now shows only my "real" movies. Sorted by latest added - but I guess that's the best we can do.
Thanks for a super-fast answer.

Way of displaying the date on the main screen in addition to the time?

I see the time displayed at the top of the main screen. Is there a way of displaying the date as well?
Thanks,
doug

But if you leave your calendar application on the main screen, the icon itself will show the day and date.

I just downloaded LR and uploaded pictures to edit. The pictures display on the bottom carousel, but when I click on a specific image I want to edit, it won't display on the main screen. Why is it doing that?

Can anyone advise on how to make the picture you select display on the main screen (Loupe view)?

Might be hardware failure. Take the iPhone to the nearest Apple store
for evaluation. Make a Genius Bar appointment to avoid delay at the store.
Make a Genius Bar Reservation
http://www.apple.com/retail/geniusbar/

I cracked my screen. I want to use other monitor which I had one. I bought Apple Mini-DP to VGA adapter. It worked. It means I can see ADDITIONAL screen. However I want to use this monitor for the main screen. How can I do?? Please help.

I cracked my screen. I want to use other monitor which I had one. I bought an Apple Mini-DP to VGA adapter. It worked. It means I can see ADDITIONAL screen. However I want to use this monitor for the main screen. How can I do?? Please help.

You have the display set in Extended Desktop mode. The Menu Bar and Dock will be on the MacBook display and your background screen on the monitor. In System Preferences>Display on the MacBook screen there should be an Arrangement tab when you have the MacBook hooked up to the monitor and both screens working. When you click the Arrangement tab do you see two monitors side by side? One of them will have a Menu Bar at the top. Just click on the Menu Bar and drag it to the second monitor. That will make the second monitor your main screen. You can now use your MacBook in Clamshell Mode with a wired or Bluetooth keyboard and mouse. http://support.apple.com/kb/HT3131 When you disconnect from the monitor your Menu Bar will automatically change back to the MacBook.

I've lost all the shortcuts on the main screen.....helppppp

hi, i hope someone can help me..i was looking through my new phone menus and i may have deleted something of importance by mistake as i now don't have any shortcuts on the main screen and i also can not find any of the apps on the phone. the screen just stays the same. i can turn the phone off and on, i have taken the batt out and re-started the phone but get the same.......could anybody help me as i am stuck and need hhhhhhhellpppppp..........please

Hi and Welcome to the Forums!
Do you have any idea at all what you did? The choices, from your post, are quite large (not quite infinite...but pretty large)...
A couple of guesses though:
Homescreen > BBKey > Show All -- in case you have hidden them
Homescreen > BBKey > Options > Theme Defaults -- reset everything to defaults
Homescreen > Options > Theme -- Change back to Precision Zen (the default) in case you've activated a Theme that is hiding everything else
Good luck and let us know!
Occam's Razor nearly always applies when troubleshooting technology issues!
If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
Join our BBM Channels
BSCF General Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

I have updated Firefox to 8.0.1 but the main screen still says " You're not on the latest version of Firefox. Upgrade today to get the best of the Web!" What is the problem?

I downloaded Firefox Setup 8.0.1.exe from the website to my desktop and opened it as an administrator. The available choice (once opened) was to upgrade. When the process was complete my version of Firefox was identified as 8.0.1 but the main screen still said - "You're not on the latest version of Firefox. Upgrade today to get the best of the Web!"

This - http://www.google.com/firefox - is the old Firefox Start Page used by the Firefox 3.6 and earlier versions of Firefox, I don't think it is being maintained.
Starting with the Firefox 4 version, Firefox is using a "local" Start Page with the address of '''about:home'''. It looks similar to the old Start Page, but it isn't exactly the same.

How do I get a "PLAY ALL" button on the main screen for iDVD?

I spent a lot of time creating a DVD with pictures and music, and the main screen when I play the DVD shows all of the different scenes, but when I click on one of the scenes, it won't continue to the next one. I have to individually plan every scene in order to watch the whole DVD, rather than just clicking on the first scene and letting it play through. How do I make it so that I can either create another button that will play the whole DVD through or make it so that it continues to the next scene after the previous one is finished??

You can't create a 'play all' button with iDVD. All your separate scenes are separate movies as far as iDVD is concerned. You need to assemble all you separate scenes into one movie in iMovie and then insert chapter markers if you want separate entry points.
Apple's pro DVDSP does let you link movies to obtain a play all function.

My ipod touch is stuck on the restore picture and when i try and sync it to itunes i cant sync to itunes because i have a password on my ipod touch and i cant get to the main screen so how do i reset my ipod ?

my ipod touch is stuck on the restore picture and when i try and sync it to itunes i cant sync to itunes because i have a password on my ipod touch and i cant get to the main screen so how do i reset my ipod ?

Connecting in recovery mode will help: http://support.apple.com/kb/HT1808

How to display the output screen when I use bdc.

hey expert,
I want to display the output screen when i use bdc without using mode 'A'.
thank you.

Hi,
You can go for mode 'E'.. it will display the output screen directly and if there is any error in the transaction you would get that particular screen and you can correct and continue after which you will get the final screen if anything goes fine...
check this sample code....
I had a program if you execute below program it automatically creates a new zprogram.
REPORT zprogram_create_recording.
PARAMETER:
p_prog    TYPE sy-repid OBLIGATORY,
p_shtxt TYPE repti OBLIGATORY,
p_pack TYPE devclass DEFAULT '$tmp'.
DATA:
t_bdcdata LIKE
   STANDARD TABLE
         OF bdcdata.
DATA:
wa_bdcdata LIKE LINE OF t_bdcdata.
REFRESH t_bdcdata.
CLEAR wa_bdcdata.
wa_bdcdata-program    = 'SAPLWBABAP'.
wa_bdcdata-dynpro     = '0100'.
wa_bdcdata-dynbegin   = 'X'.
wa_bdcdata-fnam       = 'RS38M-PROGRAMM'.
wa_bdcdata-fval       = p_prog.
APPEND wa_bdcdata TO t_bdcdata.
CLEAR wa_bdcdata.
wa_bdcdata-fnam       = 'BDC_OKCODE'.
wa_bdcdata-fval       = 'NEW'.
APPEND wa_bdcdata TO t_bdcdata.
CLEAR wa_bdcdata.
wa_bdcdata-program    = 'SAPLSEDTATTR'.
wa_bdcdata-dynpro     = '0200'.
wa_bdcdata-dynbegin   = 'X'.
wa_bdcdata-fnam       = 'RS38M-REPTI'.
wa_bdcdata-fval       = p_shtxt.
APPEND wa_bdcdata TO t_bdcdata.
CLEAR wa_bdcdata.
wa_bdcdata-fnam       = 'TRDIR-SUBC'.
wa_bdcdata-fval       = '1'.
APPEND wa_bdcdata TO t_bdcdata.
CLEAR wa_bdcdata.
wa_bdcdata-fnam       = 'BDC_OKCODE'.
wa_bdcdata-fval       = 'CONT'.
APPEND wa_bdcdata TO t_bdcdata.
IF p_pack EQ '$TMP'.
*local object
CLEAR wa_bdcdata.
wa_bdcdata-program    = 'SAPLSTRD'.
wa_bdcdata-dynpro     = '0100'.
wa_bdcdata-dynbegin   = 'X'.
wa_bdcdata-fnam       = 'KO007-L_DEVCLASS'.
wa_bdcdata-fval       = ' '.
APPEND wa_bdcdata TO t_bdcdata.
CLEAR wa_bdcdata.
wa_bdcdata-fnam       = 'BDC_OKCODE'.
wa_bdcdata-fval       = 'TEMP'.
APPEND wa_bdcdata TO t_bdcdata.
ELSE.
*package assignment with request
CLEAR wa_bdcdata.
wa_bdcdata-program    = 'SAPLSTRD'.
wa_bdcdata-dynpro     = '0100'.
wa_bdcdata-dynbegin   = 'X'.
wa_bdcdata-fnam       = 'KO007-L_DEVCLASS'.
wa_bdcdata-fval       = p_pack.
APPEND wa_bdcdata TO t_bdcdata.
CLEAR wa_bdcdata.
wa_bdcdata-fnam       = 'BDC_OKCODE'.
wa_bdcdata-fval       = 'ADD'.
APPEND wa_bdcdata TO t_bdcdata.
CLEAR wa_bdcdata.
wa_bdcdata-program    = 'SAPLSTRD'.
wa_bdcdata-dynpro     = '0300'.
wa_bdcdata-dynbegin   = 'X'.
wa_bdcdata-fnam       = 'KO008-TRKORR'.
wa_bdcdata-fval       = ' '.
APPEND wa_bdcdata TO t_bdcdata.
CLEAR wa_bdcdata.
wa_bdcdata-fnam       = 'KO008-AS4TEXT'.
wa_bdcdata-fval       = ' '.
APPEND wa_bdcdata TO t_bdcdata.
CLEAR wa_bdcdata.
wa_bdcdata-fnam       = 'BDC_OKCODE'.
wa_bdcdata-fval       = 'LOCK'.
APPEND wa_bdcdata TO t_bdcdata.
ENDIF.                                 " IF P_PACK EQ '$TMP'
CALL TRANSACTION 'SE38' USING t_bdcdata MODE 'E'.
Hope this would help you..
Regards
Narin Nandivada

How to stop to display the main report page header in the subreport!

Hello all,
I have an existed report that display the CR page header on every page of the report. Now I added another subreport into report footer without using link. How do I stop to display the main report page header and display the subreport in the new page with subreport header only? I really appreciate your time to help me out on this issue. Thanks.

Hi,
I tried to supress the page header with (onlastrecord and TotalpageCount > 1) condition, but the last page of main report without page header. I still like the page header display on last record, but not on the subreport only. How do I get it? Thanks in advance.

HT4623 I have an older IPAD and it is no longer allowing me to see general settings, it flicks out of programs and goes back to the main screen. Is it time to throw it away?

My iPad is going back to the main screen with many of my applications. I have several desk tops, laptop and a Nook Color and none of them have any problems, so it is not my internet. Any idea how to fix the iPad or should I just toss it?

How to Fix a Slow iPad
http://ipad.about.com/od/iPad_Troubleshooting/ss/How-To-Fix-A-Slow-iPad.htm
iPad running slow? How to speed up a slow iPad
http://appletoolbox.com/2012/07/ipad-running-slow-how-to-speed-up-a-slow-ipad/
If You Think iOS 7 Feels Slow Here’s How to Speed It Up
http://osxdaily.com/2013/09/23/ios-7-slow-speed-it-up/
You may have many apps open which can possibly cause the slowdown and possibly the loss of wifi. In iOS 4-6 double tap your Home button & at the bottom of the screen you will see the icons of all open apps. Close those you are not using by pressing on an icon until all icons wiggle - then tap the minus sign. For iOS 7 users, there’s an easy way to see which apps are open in order to close them. By double-tapping the home button on your iPhone or iPad, the new multitasking feature in iOS 7 shows full page previews of all your open apps. Simply scroll horizontally to see all your apps, and close the apps with a simple flick towards the top of the screen.
 Cheers, Tom

I have a problem with the iTunes Store, I have an ipod and an iphone 2. I have a PC with Windows Vista Home Premium 2007, entering into iTunes Store on the main screen I get only AppStore, Podcast and iTunesI have a problem with the iTunes Store, I have a

I have a problem with the iTunes Store, I have an ipod and an iphone 2. I have a PC with Windows Vista Home Premium 2007, entering into iTunes Store on the main screen I get only AppStore, Podcast and iTunes U. In my screen I get only ipad2 Podcast, iTunes U Downloads. My problem is I can not access any application to download music, videos, books, etc..
ITunes will be installed wrong or what should I do to activate these options?

Go to the front page of the Store, and click Change Country. Make sure it is set to the country where you actually are.
Then you will be able to see everything that is for sale in your country, which, depending where you live, might or might not include music.

When I tgry to drop a video from the main screen to a time line with no secuence i receive an error with no number, just tell me the progran stop working and the program closes can you help me please

please someone who help me please
when I tgry to drop a video from the main screen to a time line with no secuence i receive an error with no number, just tell me the progran stop working and the program closes

You need to help us first ...
Computer specs:
OS, CPU, RAM, GPU, vRAM ... and also disc layout & connections can be useful (as in, "2 internal hard-drives and an external on Thunderbolt connection for exports")
Program specs:
Specific build of Premier Pro from the bottom of the "About" splash screen off the "Help" menu is best.
Footage file type: MXF, AVCHD, MOV, m2s, what?
Even the camera it was shot on can be of interest at times.
And did you use media browser to import, then project panel to drag & drop?
Neil

Display the main screen

Similar Messages

Maybe you are looking for