Display the risk assessment and its follow on risk assessment together

Hello,
I have a requirement of displaying the Risk assessment and its Followon risk assessment on one screen.
The scenario goes like this:
I created a Risk assessment, for a work area, and closed it after making necessory changes. Now over the period, when I do the follow on Risk assessment, I  should get the details of my original risk assessment also.
I know system creates a change no. for the follow on risk assessment and both original and follow on risk assessment can be viewed using the key dates. But the reqiremnet here is to see both the versions on the same screen.
Is there any report available for the same?
Regards,
Niraj

Hello,
With the report: S_ALN_01001345 - List Versions of Risk Assessments i can see the list of Risk assessment and its follow on assessment, but its just alist, there is no link.
As you create a follow on assessment, it is creating with change no. So once the follow on assessment has been created you can see the same.
Closing the thread.
Regards,
Niraj

Similar Messages

  • TS3694 my iphone 4s said it needed updating to ios7.2 and so far its displaying the itunes logo and saying plug into itunes so i tried updating with itunes and it keeps saying it has failed (3194)

    my iphone 4s said it needed updating to ios7.2 and so far its displaying the itunes logo and saying plug into itunes so i tried updating with itunes and it keeps saying it has failed (3194)

    Hello Amz_Bajwa,
    Thanks for using Apple Support Communities.
    For more information on this, take a look at:
    iTunes: Specific update-and-restore error messages and advanced troubleshooting
    http://support.apple.com/kb/TS3694#error3194
    Unable to contact the iOS software update server gs.apple.com
    Error 1004, 1013, 1638, 3014, 3194: These errors may be the result of the connection to gs.apple.com being redirected or blocked. Follow these steps to resolve these errors:
    Install the latest version of iTunes.
    Check security software and ensure that communication to gs.apple.com is allowed. Follow these stepsfor assistance with security software.
    Check the hosts file. The restore will fail if there is an active entry to redirect gs.apple.com. Follow theadvanced iTunes Store troubleshooting steps to edit the hosts file or revert to a default hosts file. See "Blocked by configuration: (Mac OS X/Windows) > Rebuild network information."
    Try to restore from another known-good computer and network.
    If the errors persist on another computer, the device may need service.
    Best of luck,
    Mario

  • I'd tried to restored my iphone but after that its just display the apple logo and nothing to work on?

    I'd tried to restored my iphone but after that its just display the apple logo and nothing to work on?

    Hello there, Shaneol10.
    The following Knowledge Base article provides some great steps for troubleshooting your issue:
    iOS: Unable to update or restore
    http://support.apple.com/kb/HT1808
    If the iPhone still isnt recognized, refer to these documents (depending on which Operating System you are using)
    iOS: Device not recognized in iTunes for Windows
    http://support.apple.com/kb/ts1538
    or
    iOS: Device not recognized in iTunes for Mac OS X
    http://support.apple.com/kb/TS1591
    Thanks for reaching out to Apple Support Communities.
    Cheers,
    Pedro.

  • Hi my iphone was fully charged and turned its self off, i have tried to turn it back on and reset it, but no luck so i have plugged it in to my pc and it displays the apple logo and then goes back off i have tried this a number of times with no success

    hi my iphone was fully charged and turned its self off, i have tried to turn it back on and reset it, but no luck so i have plugged it in to my pc and it displays the apple logo and then goes back off i have tried this a number of times with no success anyone got any idears?

    Try here:
    iOS: Not responding or does not turn on

  • I have a serious (and bizarre!) issue with my novation impulse (Although i've tried it with two other keyboards and i still have the same problem) and its compatibility with mainstage 3

    i have a serious (and bizarre!) issue with my novation impulse (Although i've tried it with two other keyboards and i still have the same problem) and its compatibility with mainstage 3.
    the problem is best explained on the following one - page thread: 
    https://discussions.apple.com/thread/3951518?start=0&tstart=0
    (Clearly i'm not alone in this problem, although i think i figured out what's going wrong a little more than he did...read on!)
    his solution, to put mainstage in jump mode, is very unsatisfactory to me, as it bounces all of a sudden to drastically different settings.
    basically, my analysis is that my controller is NOT receiving MIDI date from mainstage.  in other words, mainstage knows what my controller is doing, but my controller doens't know what mainstage is doing.
     let's say i turn the knob all the way to the right ... 127...and the virtual fader goes to the right like it's supposed to. 
    now...next...let's say i change to a different patch, where that same VIRTUAL fader is not at the max clockwise position..maybe it's only at 1pm.  now when i turn the physical knob to the RIGHT, the midi data is still at 127 on the controller!  it didn't "reset" to sync up with the new level (say 80 or so) setting on the new patch.  so i can't increase that new setting of 80 by continuing to turn the knob to the right.  i have to turn it all the way to zero,...and then continue PAST zero until the controller thinks that IT is at 0...at that point the controller and mainstage are in agreement, and things work fine....so bascially, the keyboard thinks the level is at max...but mainstage thinks the level is at 1pm.
    i am using Logic 9, and i have a macbook pro 2.9 Ghz I7 with 8 gigs of memory and OS X 10.8.4

    Hi Josh,
    Thanks for taking the time to contact us here a Novation for technical support. Lets continue to correspond via email so we can get your issue resolved.
    Thanks.
    Mike Towns

  • A report which shows the vendor invoice and its purchase order MM

    Hi All,
    I wonder if ther's a SAP standard report which shows the vendor invoice (the FI document) and its purchase order MM.
    Could anyone help me?
    Thanks
    G.Rossi
    Edited by: Lakshmipathi on Aug 2, 2011 2:24 PM
    Thread Locked - Reason  Cross Posted

    Dear,
    you can use FBL1N,
    From there you can view following things:
    1. Vendor Invoice = Reference
    2. Document type = KR and RE for Invoices
    3. Po Number
    4. Amount
    you can enable there many fields as per your requirement.
    Hope this helps!!!
    Br,Vivek

  • My iphone 5S is stuck on a screen displaying the itunes symbol and a charging cable. I tried connecting it to itunes and updating it to the new software, and backing it up but it keeps saying unknown error 4005, Also when I first tried backing up my

    My iphone 5S is stuck on a screen displaying the itunes symbol and a charging cable. I tried connecting it to itunes and updating it to the new software, and backing it up but it keeps saying unknown error 4005, Also when I first tried backing up my phone on my computer it would begin the processes then half way through it would say IPHONE has been disconnected, now it won't recognize it or anything. what can i do? This is a brand new phone!!!

    Hello jraff21,
    I was able to locate a support article for the error you mentioned. The following steps may help you get your device back to working order:
    iOS: Restore errors 4005, 4013, and 4014 - Apple Support
    You may see one of these messages if the device unexpectedly disconnects during the update or restore or iTunes couldn't tell the device to go to the restore state.
    The iPhone [device name] could not be restored. An unknown error occurred (4005).
    The iPhone [device name] could not be restored. An unknown error occurred (4013).
    The iPhone [device name] could not be restored. An unknown error occurred (4014).
    Try these steps to resolve the issue:
    Install the latest version of iTunes.
    Restart your computer.
    Make sure your computer is up to date. If an update requires a restart, check for updates again after you restart.
    Restore using another USB cable.
    Learn more about updating OS X.
    Learn more about updating Windows.
    Restore your device on another computer.
    If you continue to see error 4005, 4013, or 4014 when you restore your device,contact Apple for support.
    Learn more about other update and restore errors.
    Thank you for contributing to Apple Support Communities.
    Cheers,
    BobbyD

  • My ipod is displaying the itunes logo and a usb cord.  I've tried reseting it but I can't get it so do anything!

    My ipod is displaying the itunes logo and a usb cord.  I've tried resetting it but it didn't work.  Any suggestions?

    Your in DFU mood do this:
    iOS: Unable to update or restore
    Follow these steps to perform a recovery-mode restore on your iPhone, iPad, or iPod touch
    You may need to perform a recovery-mode restore if you experience any of the following situations on your iPhone, iPad, or iPod touch. The device:
    Displays the Apple logo with no progress bar or a stopped progress bar for over ten minutes.
    Restarts but never displays the Home screen.
    Is no longer recognized in iTunes after an update or restore did not complete.
    Automatically goes into recovery mode after having an issue while installing an update or performing a regular restore.
    How to perform a recovery-mode restore
    If your iPhone, iPad, or iPod touch is already showing the "Connect to iTunes" screen, please go to step 5.
    Connect your USB cable to your computer but not to the iPhone, iPad, or iPod touch until step 3.
    Turn off the device: Press and hold the Sleep/Wake button for a few seconds until the red slider appears, then slide the slider. Wait for the device to turn off.If you cannot turn off the device using the slider, press and hold the Sleep/Wake and Home buttons at the same time. When the device turns off, release the Sleep/Wake and Home buttons.
    While pressing and holding the Home button down, connect the USB cable to the iPhone, iPad, or iPod touch. The device should turn on.
    Continue holding the Home button until you see the Connect to iTunes screen. When this screen appears, you can release the Home button:
    Note: If the image of a battery appears, let the device charge for at least ten minutes to ensure that the battery has some charge, and then start with step 2 again. If you don't see the Connect to iTunes screen, try these steps 1 through 4 again.
    iTunes should automatically open and display the following message:
    "iTunes has detected an iPhone in recovery mode. You must restore this iPhone before it can be used with iTunes."Note: If iTunes not open after two minutes, please open iTunes yourself.
    Use iTunes to restore the device.
    If you see the Connect to iTunes screen but the device does not appear in iTunes, follow these troubleshooting steps if you're using a Mac, or these steps for Windows computers.
    Additional Information
    Note: When using recovery mode, you can only restore the device. All user content on the device will be erased, but if you had previously synced with iTunes on this computer, you can restore from a previous backup.

  • I've bought an Iphone 4S in the UK. Using the phone in Argentina, it displays the "No Service" and "Invalid SIM" errors sporadically. The only solution is to reset the phone (switching it ON/OFF). Any suggestions?

    I've bought an Iphone 4S in the UK. Using the phone in Argentina, it displays the "No Service" and "Invalid SIM" errors sporadically. The only solution is to reset the phone (switching it ON/OFF). Also most of the time, the SMS are not sent nor received...
    The phone was checked by my carrier (phone company, Movistar) and they replaced the micro SIM card. bear in mind that there's no Apple shop here and the Iphone 4S is NOT available in Argentina!!!
    Any suggestions?

    Dear all,
    (THIS CONCERNS MTC TOUCH CUSTOMERS IN LEBANON)
    I've received an email with a solution to the problem; you have to update to the new iOS 5.0.1 firmware (9A406)!! It's been 1Hour and so far my iPHone 4S is working just fine. Please follow carefully the below instructions:
    RUN A FULL BACK UP BEFORE DOING ANY OF THIS
    1. Download the new iOS 5.0.1 firmware (9A406) from the internet. (800MB)
    2. Connect your iPhone 4S to iTunes.
    3. Once connected, two options will show: ‘restore’ and ‘check for update’.
    4. Press down SHIFT and choose ‘check for update’. (if you click ‘check for update’ without pressing down SHIFT doesn’t work.)
    5. Select the new firmware (9A406). Note that the file should be renamed ‘iPhone4,1_5.0.1_9A406_Restore.ipsw’  (instead of ‘iPhone4,1_5.0.1_9A406_Restore.zip’), i.e. changing the file extension from ZIP to IPSW. iTunes will now work alone and update your iPhone 4S.
    A full back up is recommended before firmware upgrade.
    HOPE THIS HELPS

  • Help needed. I have a 3TB external hard drive partitioned into 1TB's. I used one partition as backup for the main computer hard drive. But now it is greyed out as shown in the disk utility and its name changed, i dont know how that happened, i tried verif

    Help needed. I have a 3TB external hard drive partitioned into 1TB's. I used one partition as backup for the main computer hard drive. But now it is greyed out as shown in the disk utility and its name changed, i dont know how that happened, i tried verifying and repairing it but had no luck. I also tried mounting and unmounting it but still no solution. Anyone to help please?

    Looks bad. I would strongly advise backing up the stuff on the other two partitions as soon as possible in case the rest of the drive goes wrong.
    Beyond that, Disk Utility has limited abilities to repair disks, DiskWarrior uses a different approach and might, emphasis might be more successful. It has certainly done the job for me in the past when Disk Utility could not.
    See http://www.alsoft.com/diskwarrior/

  • I tried to restore my iphone but when it was restoring it said a problem occurred and now it just shows the itunes symbole and its telling me to connect to it but when i try to it  doesnt show up on my computer

    i tried to restore my iphone but when it was restoring it said a problem occurred and now it just shows the itunes symbole and its telling me to connect to it but when i try to it  doesnt show up on my computer

    Hi there starbaeza,
    You may find the information in the article below helpful.
    iOS: Forgotten passcode or device disabled after entering wrong passcode
    http://support.apple.com/kb/ht1212
    -Griff W. 

  • I am updating iphoto 9.1 to 9.3 and every time when I clicked for update aps store asked to open it in the account where you purchased. I am using the same account and its available in the purchased item of this account. Can someone resolve this problem.

    I am updating iphoto 9.1 to 9.3 and every time when I clicked for update aps store asked to open it in the account where you purchased. I am using the same account and its available in the purchased item of this account. But in my purchased item library it indicates that you update iPhoto. I am not sure which account the aps store asking. Can someone resolve this problem.

    Contact App Store support. They're the folks who can help with Account issues.
    Regards
    TD

  • I just plugged my iphone in to download some pix to my computer and my phone is now showing a plug with the itunes icon and its telling me I have to restore my phone and will lose all my data. *** is going on and how can I go back?

    i just plugged my iphone in to download some pix to my computer and my phone is now showing a plug with the itunes icon and its telling me I have to restore my phone and will lose all my data. *** is going on and how can I go back?

    "I have logged in to my itunes account on a different computer and none of my purchased music is showing up."
    Correct.  it does not magially appear in other places.  It will only be where you put it.
    "I also have plugged my iphone in to get updates but it says I will lose all media and apps if I don't update on the computer where  I sync everything. "
    Correct as well.  Iphone will sync with one computer at a time.  Syncing to another will erase the current content.
    You need to copy everything ( itunes library/contacts/pics/calendars/files/docs) from the old computer, or your backup copy of the old one, to the new one.

  • How to display the current Date and time in xslt version 1

    i am using xslt version 1 .i want to display the current date and time in the output xml using xslt(Jdeveloper) ..i just added the namespace xmlns:xp20="http://www.oracle.com/XSL/Transform/java/oracle.tip.pc.services.functions.Xpath20"
         xmlns:ns1="urn:oracle:integration:b2b:7D30046DC68A4FA689956D8241FA3B99">
    and used thsi function <xsl:value-of select = "xp20:current-date()"/>
    but it does not works for me ..help needed????
    Edited by: user9519185 on Jan 20, 2009 3:04 AM

    Use a formula: =NOW()
    Format the cell for Date and Time, with both the Date part and the Time part displayed. Format the two parts as you wish, using the choices in the Inspector's menus.
    The cell will update each time the table is recalculated.
    (Description is for Numbers '09 (Mac), Numbers for iOS will be similar, but not necessarly identical in details.)
    Regards,
    Barry

  • Even when I charge my Mac Pro to the full bar, the battery seems to be drained even when I am not using it. Example, after charging it full, i switched it on the next day and its 79% battery left. Is there something wrong? help please

    Even when I charge my Mac Pro to the full bar, the battery seems to be drained even when I am not using it. Example, after charging it full, i switched it on the next day and its 79% battery left. Is there something wrong? help please

    Assuming you are disconnecting from line power, when you say switched on, do you mean it was shutdown or in sleep mode?  If sleep mode the battery will still drain because sleep still keeps some things active and the battery does drain a little.  However, to go from 100% to 79% charge overnight is a bit excessive in sleep mode.  Unless you have some processes set to activate over night by the cron file and do things like backup the system.
    What are the statistics on the battery, the apple in the upper left corner, About This Mac, More Info, System Report, Hardware, Power...things like battery Condition, Capacity, remaining charge, voltage, current.

Maybe you are looking for